Nice to see the vehicle being used for what it was made for... all be it soft off roading...

@all4x451

5 ай бұрын

Yes very true there are a few lanes a little more challenging, but generally just green landing! Will be hopefully some better videos once have moved to Mallorca, has some tricky mountain lanes👍

Another top video Martin- nice one. Keep 'em coming.....

@all4x451

2 жыл бұрын

Thank you, will do 👍

Nice vid nice and simple keep them coming!! 👌🏼

@all4x451

2 жыл бұрын

Hi Thank you for the message👍 Regards Martin

@all4x451

2 жыл бұрын

Hi Been watching your videos you certainly find some great tracks, perhaps in the future we can get together and do some lanes together👍 Regards Martin

That p38 is too good for green laning now, future classic especially in that colour and spec, the values are really on the rise.

@all4x451

Жыл бұрын

It was a tough decision but is the best vehicle for the job, and have big plans for her😀👍

Great vid 👌

@all4x451

2 жыл бұрын

Hi Thank you for your kind comment👍 Regards Martin

Remember to key the paint surface before appling Rapto... Oh wait, never mind you've just ticked that box!

@all4x451

2 жыл бұрын

😂 thank you for commenting👍 Should be easy prep for sure😀 Regards Martin

Watch those valves. If they get any dirt in them they tend to not work. It's also easy to unscrew the adjustment end and mess up the setting. The P38 is the best.

@all4x451

Жыл бұрын

Hi Thanks for message! Yes have rebuilt EAS a few times now😀👍 Cheers Martin

Hi pal I have a 1994 p38 4.6 v8 HSE Currently has the standard EAS What setup did you get to lift the body? Id like to do the same but keep the air ride aswel I only paid £600 for it as the previous owner thought the ecu was fried but it turned out to be a few corroded wires and bad earths 😂 actually in pretty good condition for the year Black in colour with grey leather, has an log conversion which works perfectly aswel

@all4x451

Жыл бұрын

Hi Sounds like a great deal😀👍 I have been trying to copy my 2inch lift kit which I got from Australia, at the minute having problems getting the right company to do it! I have done video called “Air vs Spring” explaining the lift kit! Will let you know when have kit available. Regards Martin

When you have your snorkel made, what do you do with the BECM which is under the drivers seat?

@all4x451

2 жыл бұрын

Hi Chris Thank you for your message! The snorkel doesn’t affect the BECM and the MAF sensor is still operational, it’s just an extension of the air intake👍 Regards Martin

@chriskona7652

2 жыл бұрын

@@all4x451 Thanks for your response. I'm sorry, I phrased my question badly. What I meant to ask is why have a snorkel which allows the engine to run in or under the water when the BECM is below the drivers seat. I mean isn't it going to drown long before the engine requires a snorkel.

@all4x451

2 жыл бұрын

Hi Chris That is true if you are in a deep crossing for too long, or the door seals are not very good😀 To date no water has entered the car although I also have extra lift with air suspension which helps! Cheers Martin

@chriskona7652

2 жыл бұрын

@@all4x451 Thank you.

@all4x451

2 жыл бұрын

No problem anytime👍

Does the p38 have locking dif,s low range

@all4x451

11 ай бұрын

Hi Thank you for message. No only traction control at the minute, will be installing a rear Torsion diff at some point similar to Limited Slip Diff! Have recently installed reduced Diffs that will help will low range, can see installation in recent video👍 Cheers Martin

What psi do you run for road driving.

@all4x451

2 жыл бұрын

Hi Thank you for your message! On the road I inflate to around 30 psi, still a bit like riding on jelly but seems to wear tread evenly👍 Regards Martin

hi! what is the size of the tires?

@all4x451

Жыл бұрын

Hi Thank you for message. They are 265 75 R16 insa turbos special track. Cheers Martin

where did u get that grille?

@all4x451

10 ай бұрын

Hi Thank you for message! The grill is of a Range Rover Sport, but have drilled holes in then countersunk holes and painted! Cheers Martin

@skipg4660

10 ай бұрын

@@all4x451 wow.. that looks nice.. im still fixing my 2002 p38.. i need new grille 🤣🤣🤣

@all4x451

10 ай бұрын

There you go then happy days👍 Just be careful when drilling as drill flys through plastic😀

how much of a lift do you have?

@all4x451

Жыл бұрын

Hi Luke I have a 2inch lift, but have air bags still so can lift or lower👍 Regards Martin

@datnguyen478

Жыл бұрын

@@all4x451 thanks for sharing. Do you mean you have the factory air bags but set the controller so that it’s normal height is 2” higher OR did you modify the height sensors and the other parts like the shock to support the 2” inch? Thanks

@all4x451

Жыл бұрын

@@datnguyen478 Hi Dat They are Arnott air bags but standard fittment, I run at standard ride hight unless need to change for extra clearance, or lower for of camber! I have a 2inch lift kit especially designed for the P38 form Australia, I am trying to replicate as kit was last one! Cheers Martin

You need a Jimny.

@all4x451

7 ай бұрын

Lol😂 Thank you ! Well you could be right😀👍

@TheAndre8900

5 ай бұрын

As a weight ballast for the front of the 38 right?

@adsaccuracy

5 ай бұрын

You have a 38, bad luck@@TheAndre8900

@all4x451

5 ай бұрын

Will be getting a front winch fitted soon, not quite the weight of a jimny though!

@ronaldrrootiii6040

3 ай бұрын

A Jimny so that you can haul and tow nothing and FLIP EASY on uneven surfaces while looking goofy lol