Seat Swap part of video starts at 6:35

You’re a humble dude. Even though you’re a KZreadr and are not rich nor poor but you’re living comfortable I’m sure your tip to the tech just proved that! Keep pushing the good content buddy

Coming soon: I bought a new Duramax

@lucasa4891

5 жыл бұрын

Ford*

When you say it's because it's a Dodge when everything that's wrong was aftermarket or broken when you bought it

@upbeatsnow_tk294

5 жыл бұрын

Still a dodge

@jamesdiaz2748

5 жыл бұрын

But it still broke in someone else’s possession. Why because it’s a dodge. I’m a big cummins fan just not a dodge fan

@williamstru2119

5 жыл бұрын

Aftermarket because dodge stuff failed and aftermarket is half the price and just as reliable

@SMD-si7fm

5 жыл бұрын

garrett man I’m sayin. It doesn’t matter what the tow rating is, if you tow with it, no matter the vehicle, things are going to wear out faster. You cant expect Factory to last forever, especially if you’re towing with it on the regular. If you’re going to by a “tow rig” be prepared to pay for s built transmission. It’s a lot of $$ but it’s worth it.

@Taylordrifts

5 жыл бұрын

@@garrettmonk8432 It has a built trans. My point is, this particular truck has been nothing but problems. I like the truck, so I'm going to keep fixing it. I just hope it gives me a break at somepoint. And idk why people complain about the IFS on a chevy. I put 30,000 on mine without a single problem.

Thanks for the video. Im doing the same swap in my 06 quad cab. Your video is helpful.

I for one, am LOVING the narrated Timelapse!

@Taylordrifts

5 жыл бұрын

Thanks! I like doing it over adding music because you can actually tell what's going on.

Should’ve never got rid of the duramax

@Taylordrifts

5 жыл бұрын

I do miss it, but I still believe it wouldn't have pulled this trailer very well. it was short wheelbase where this truck is a longwheel base chassis plus being a 3500 it has stiffer rear leafs, already has a built trans, and intake, tuner, exhaust. It just needs to stop breaking random stuff all the time. lol

@spunk97100

5 жыл бұрын

Taylor Ray they both have their pros and cons I think with a few mods to the duramax you could’ve pulled whatever you want wherever you wanted but I do agree on why you got the dodge as far as having a gooseneck hitch and built trans, I think it’s more the quality of the duramax compared to the dodge that made it stand out

@mtotheizatt

5 жыл бұрын

Goon Garage 321 that duramax was so damn clean

Did you try to use your old jump seat on the new brackets? I got 2010 seats from a local yard for my 07 and didn't know at the time that I needed the jump seat as well. If I knew whether they match up I'll just get brackets...

Taylor, this was a huge help. I have a Gen 3 quad-cab myself and have been wanting to swap out the front and rear cloth seats for upgraded leather seats. Knowing the Gen 4's don't require a major modifications was my biggest question. I like the truck without the spacers and I think it's better to have well fitting shoes on the truck, especially when you are towing that amount of weight. Have you ordered a new vent cap for the trailer, or does it still get wet inside when it rains? She just needs some thorough tender care, not quick fixes.....because she was not maintained as well previously IMO. I have gotten as high as 26 mpg in my manual 3500. Empty of course.

3:10 Damn Taylor! Looks like you motor boated a dirt monster!

@Taylordrifts

5 жыл бұрын

It was a rough day. lol

@ddevil4980

5 жыл бұрын

@@Taylordrifts forsure brother!

Dont know if you read the comments but love the attitude about things going wrong and putting the bad on the channel as well as good enjoy watching bud

3rd Gen. Dodgers of the easiest vehicles I have ever worked on I have the 07 Mega cab at it's been nothing but a joy to work on the seat pad I got on Amazon for 50 bucks put it on and 15 minutes without taking the seat Out And they are the best looking Trucks outside of a 1979 Ford

THANK YOU FOR MAKING THE LINKS TINY AT THE END

Love the truck videos

Did you torque the lugs to the correct specs? Cause that's kinda why you do it

Decent video and informative about the 4th gen seats fitting in a 3rd gen. One thing that kinda messed with my head a bit is that it would have been a great time to at least vacuum the cab while the seats were out instead of installing the replacements over the top of all that debris. haha, As far as the parts failures on many of today's vehicles I feel that it is because most of the manufacturers no longer make their own parts. Just one of many examples: I had a 2001 Camaro SS with the SLP Package (Basically a lot of the same parts that the Vette had including the infamous LS1 piston slap) The brake rotors would warp between 2K-3K miles. They would just keep replacing them under warranty and I finally asked why they don't just fix the problem by producing a better rotor? Their answer was that they are made by a 3rd party manufacturer and it is cheaper for them to just keep replacing them under warranty than to have GM start making them. That is the dumbest thing that I had heard. This is a huge part of why we can't have nice things anymore. As far as the design of 3rd gen Dodge Ram is concerned their HVAC boxes Suck! Broken blend doors and diverter doors are a stupid design and a PITA to repair all of the different doors in that box. I still love my RAM but like any other truck that I've owned it's not without issues. Thanks for the video.

Looking like a Diesel Mechanic!

You have to vacuum the carpet before the install of the seats.

Still waiting on the turbo C10 build

All you need is good drill set and some large torx set and just drill a nice hole then pound the torx in and work it out with PB or some other penetration oil usually works for me anyway

I bought a 4th gen console for my 3rd gen, will it work with 3r gen seats or only the 4th gen? thanks

I have the same truck and I have been looking for spacers, what spacers do you have?

Sun coast transmissions make amazing transmission for rams, the platforms are amazing just gotta do them up right

Should have keep the chevy

I bought 4th gen seats for my 3rd gen, can I use 3rd gen middle seat with 4th gen seats?

Nice to know I can swap out my seats for a 4th gen

Will those bolt right up in a 2002 slt quadcab

What year and model of truck did those new seats come out of?

What years front seats will fit in a 2003 Dodge ram 1500 reg cab. Thanx

U need to talk to Greg a on KZread 👌🏿

I highly recommend picking up a bissell portable spot carpet cleaner they are sub $100 and they are perfect for cleaning vehicle interiors

@williamstru2119

5 жыл бұрын

Chris Conti yup. Great machine for the price

I don't usually post, so I feel remiss in posting something critical. My guy, your videos are awesome. Your content is awesome. BUT....why you no vacuum out the floor when the seats were out. Just saying.

I’m looking at a 2006 Mega cab. I’m thinking 4th gen seats for sure. Or remove the seats from my 09 Yukon?

@Eatmydick666

4 жыл бұрын

Michael Rizzo I have a 06 mega cab Laramie package. Leather wore out being my work truck. But who the fuck cares about interior, but covers for your seats if you plan on doing a lot of wear n tear...

do you want the duramax back?

Thinking about swapping them in my 3rd gen single cab

I think the seats look good

*We were right... there I said it... no I don't feel any better. Thanks for sharing this.*

I live in Inverness FL. Able auto is a great mechanic shop.

Looked like s with the spacers and you will delay replacing the front bearings for a while ... already well whipped ...

Really like this channel because you havent bought a totaled super car to rebuild yet

@williamstru2119

5 жыл бұрын

Cory Lovely soon though, lol.

@williamstru2119

5 жыл бұрын

He bought a dodge, so he won’t be able to afford to rebuild a supercar

Man..... Crazy... If i seem red flags i would check and recheck everything.. know you know.. when getting sests.. believe their is quad cab crew cab and mega. And a think a classic.. quad cab is normal seats and doors up front.. back is smaller doors and not to great of a leg room.. a crew cab is a full 4 door seats which the back is more legroom then the quad.. and the mega cab is so much soace in the back can possibly stretch your legs..and finally the single cab... Only the two seats no backseats at all..am also excited for mine.. i took a least 2 weeks finding these seats.. finally getting them shipped!! By the end of this week of mid week next week i whould habe them.. its from a 2015 all leather blacked out 450 for front seats and back.. putting it in a 2003 quad cab.. 6 inch lift starlights black suede uptop. Touchscreen. Remove old plastic and get all leather dash. 1000 dollar headlights revese kight leds. And remove the bumper for aome steel bumper up front and back.. see who can install sensors on them.. to not crash into other cars crushing them in the process😂😂 has 35 might go with 37.. but also removing the back window with the middle able to open the window for fresh air.. and replacing the center concel with same yr but just leather.. removing the dash and upgrading it to newer look... Has a led bar up top for dark areas... What else is there to do.. amd lastly big biy upgrades with brakes and pads and rotors. For heavy tires.and shocks with coils. To make the ride too quality.. rims in brown color.has allqays been my dream to oneday rebuild the truck to a bit more modern. Up to date.. and the most expensive is ceramic tint all the way around and get the fog lights to work. 15+ yrs strong and just dont want to let go of the truck. Am 23 now and just need that final touch after all this and get it in candy blue with heavy flakes.. and a reverse camera with touchscreen...

Pro tip always add grease to your lug nuts the newer the vehicle's the worse the thread or nuts! Good luck

I've had the same problem with lug nuts like that

Time for windshield wipers !

How much did you pay for those seats?

but I also have a 2001 Dodge Ram 2500 diesel and I changed the front seats and center console the seats came out of possibly a 2016 or 2018 Nissan Titan the biggest truck that Nissan makes but the seats fit perfectly in my 2001 Dodge I just had a drill new bolt holes but the width the height was perfect it's not like I had a big spaces between the door the seats look like they were made for the truck the guy I bought them from must have crashed his truck but the seeds were brand new

Man, please keep the dodge, for real it's an amazing truck, once you get through those annoyances! Itll be well worth it!

@Eatmydick666

4 жыл бұрын

Brady Bigras just like any truck, they don’t make things perfect for a reason...

Just let it be a brodozer Taylor

I just watched this video twice

The dodge is still the way to go. Take care of all the dumb shit and the truck will take care of you

Put a 4th gen front bumper on this!

Gotta love a reliable duramax!!

AC for the 06 dodges went out and I believe was a recall... my shit doesn’t work but fuck who needs AC when you’re hauling ass?

Those are not just Dodge problems. My 2000 f250 7.3l. rubbed cooler lines went out, injectors bad, injection pressure sensor died, back pressure sensor died, and my passenger and back seat is warn. My 7.3l excursion different issues but same amount. That the deal with diesel work trucks. My wife hate my truck but I love it.

@jacoblarson274

5 жыл бұрын

its a ford.

you gotta get an air matress for the mega cab rear seat section dude thatd be perfect for sleeping in at events

Yeah sorry dude I’ve come to the conclusion that 3rd gens suck. I stand by my second gens all day but you will need work. I prefer the 12valve Cummins because its more reliable than a 5.9 24 valve. Im completely dumb about the 6.7l? cummins but would give it a shot for a fourth gen ram.

@ClimptonDiddlehopper

5 жыл бұрын

Agree my second gen is fantastic. I dragged my transfer case but that was my fault plowing snow with a worn chain thinking I could go one more winter....I was wrong.lol

@brandonMrLove

5 жыл бұрын

Haha im great at blowing axles in the winter. Its like i dont know how to be an adult when i see snow and ice. Lmao

Would you be interested in some afe items and a brand new banks intercooler for it. In exchange for a huge price cut and put some control arms on?

I as a person living in Oregon (24+ years) laugh at your rain talk.

the problem that you're having with your AC I had the same problem with my Dodge Ram pickup the system needs to be charged it's just how it comes in two the cab it goes from the driver side to the pasture side and by the time it gets to the passenger side AC is warm because the heat of the motor so I brought it to a mechanic and he just maybe go get some AC Pro stop leak put that through evacuated and recharged my truck and the AC was fine

It's not that it's a Dodge it's that it looks well abused by the previous owner. The trans lines is an issue I ran a new factory set and got a couple years before they rubbed through. So I changed everything over to teflon lined steel braid.

Taylor, how are the Lionheart tires treating you? I was thinking of ordering some for my Tahoe.

My dad has a 4th gen Ram 2500 and I've done numerous roadtrips in it and i can say from my experiences that those seats are very comfortable.

thats thise cheap aftermarket lugnuts man id get some good dorman brand lugnuts and throw those ones you have as far into the woods as you can ... :)

That part has nothing to do with Dodge..... That's the cheap Chinese lug nuts 🤔

Get some black headlights like durtymaxjack. Also u should definately have bodevision prime it and paint it in paint match raptor liner.

10/10 support that Buc-ee's shirt.

I bought a plasma cutter for getting locknuts off.. 😂 I feel you!

@Woodie-xq1ew

5 жыл бұрын

that is the perfect amount of overkill

@brysonshires9742

5 жыл бұрын

You can never be Overkill enough

If you win the next comp, you are a God. Hope you do because you deserve it.

Seat covers front and rear. Floral pattern.

Gonna eventually put 2nd gen seats in my 1st gen

@brandonMrLove

5 жыл бұрын

Leroy The-Savage do it. I went out and got leather second gen seats for all 3 parts for $200 bucks and they are completely unmolested and so much more comfortable than the second gen clothes seats. But make sure you get seats out of a 98 to 02 for more comfort.

I must have missed the episode where you fix the AC, what was it?

@nothwac

5 жыл бұрын

wafflezoot I’m wondering was it was?

How much did the seats cost?

@nismojdm5950

5 жыл бұрын

$350 he literally said it in the video

@dangerousfreedom4965

5 жыл бұрын

Nismo Jdm you watch the whole vid?

Plus it sounds hella cool

Duranax mennn why you get eid of it😩😩

I'm still so sad you got rid of that clean LB7 for a giant turd

Truck looks way better without spacers. Good call!

haha so true, driving through the rain has made us floridians pros, now that I'm in TN we don't have a lot of rain but when it rains it pours. I just continue through the roads while everyone else has either slowed to a crawl (which isn't safe) or pulled over.

How I look at cars when they break it can happen to any car can even happen to brand spanking new cars that drive of the forecourt it part of the parcel of ownership of cars

im moving to tampa from Nc in about 4 weeks. Am i making a mistake :O lol

@ClimptonDiddlehopper

5 жыл бұрын

Yes

@brandonwhitmire1904

5 жыл бұрын

@@ClimptonDiddlehopper uh oh lmao it looks like im about to melt

Should of kept the Dmax

I’m pretty sure those are the EXACT same Autozone lug nuts I have on my truck. Maybe I should get different ones... or maybe I should just never take them off again

🎵🎵 I got new seats in the front Old 1's in the back I drive a Dodge truck And ma wheels are frickin' black 🎵🎵

@Sagekable

5 жыл бұрын

Fuckin cringe

WHEN YOUR SAYING ALL THE BAD THINGS OF THE TRUCK ALL I HEAR IS VIDEOS COMING LET ME WATCH THEM ALL BRING THEM 🙌🙌👌👌💪🏻💪🏻💪🏻💪🏻👊👊👊...

Idk if you have fix the spacer issue you’ve been having! But you should get BORA spacers. Best in the market.

didnt even try to clean those new seats haha

Did you suck the lugs down with an impact? Sounds more like over torquing than "dodges" fault, assuming its even the original hub.

@Taylordrifts

5 жыл бұрын

Lug nuts were not dodges fault at all. Just another issue to add to the pile.

You should have cleaned the seats before you installed them. "water spot" from some spilling coffee in their lap.

I'm on record for saying keep the Chevy... Good luck man

can you please take off the spacers for the wheels?

@FriENTlyFire

5 жыл бұрын

watch until the end

Are those tree of gondor from the lord of the rings gauges you're wearing? It's an odd question, but I just noticed it.

6:30 ish when Taylor’s talking about the rain I’m just here like yeah that’s the normal weather in England. Out of state people doing 30 English people doing 90 coz we’re probably late for something

How are aftermarket parts the trucks fault ?

@trevorfout4759

5 жыл бұрын

Just stay on it man all stuff you will have on a higher mileage truck and once you get it you shouldn't have to mess with it again

Why didn't you clean them first?!!!

How much for the center console!!

Jenky like the time I put 89 Toyota tercel seats in my 89 Toyota pickup? Yea it was weird..

Any truck that is that beat up is going to have issues, Ford Ram, or Chevy. Come on man!

@pantygnome

5 жыл бұрын

My Frontier went through 3 sets of calipers in 50K miles. Also broke both rear leaf springs, bed rusted out and the AC leaked (just like this Dodge!). There is no perfect truck out there.

I know there are a ton of I told you so's. BUT like I said Duramax for the win. : D

Dude I need seats for my 03 2500 Dodge Cummins.

I did this in my first Gen on my channel haha

You should have kept the durtymax as a back up