Who makes the spacers. I bought some OE Wheel C4 ZR1 reps in the same size and they sit way too far in with the +56 offset
@garyburrus9379
2 жыл бұрын
I just picked some up off of eBay. I made sure that they had good wheel studs installed. Look for 25mm 5x120.65 Camaro/Firebird spacers
@Rhettnorris09
2 жыл бұрын
@@garyburrus9379 im actually looking for these exact ones? Can you copy paste the link man?
@garyburrus9379
2 жыл бұрын
@@Rhettnorris09 here you are: www.ebay.com/itm/191672513853?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=5bJ2g5z3Sw6&sssrc=2349624&ssuid=9xN1V31TRVC&var=&widget_ver=artemis&media=COPY
@PlymouthBarracudaV8Hemi Жыл бұрын
Can I install four 20mm spacers on my 2011 SS with stock 20inc wheels ? Will this affect the turn of the front wheels?
@culticbaton Жыл бұрын
If anyone is planning on doing this, use hub centric spacers. Lug centric is dangerous and not a good idea.
@deanharris1739 Жыл бұрын
I had to purchase spacers because of rubbing as well. However, my aftermarket wheels don't have the cavities. I think I'll have to replace the factory lugs with shorter lugs. Do you have any other recommendations. Where did you purchase the drag bags? How exactly does it help your suspension?
@garyburrus9379
Жыл бұрын
If your lugs stick out a bit, the cheap and easy way to do it is to put on the spacer and use a sawzall to cut the lugs down. Replacing 20 wheel studs is a pain in the butt. I got the drag bags from Summit Racing (link below). What they do is prevent the wheels from coming up and rubbing on the wheel wells when you hit large bumps or have a heavy load in the car. My old tires had tons of cuts on the sidewall from rubbing. I have never had to put more than the minimum pressure in mine which is 7psi. Be warned, it's a b*tch to get the drag bag into the coil spring! www.summitracing.com/parts/air-60897/make/chevrolet/model/camaro/year/1995
@deanharris1739
Жыл бұрын
@@garyburrus9379 thank you
@Ethan-inglis11 ай бұрын
I have a 95 z28 as well, just bought bmw wheels. How did you get them to fit?
Пікірлер: 12
Great video! Where did you get those spacers?
Do you have an instructions video on the airbags?
Who makes the spacers. I bought some OE Wheel C4 ZR1 reps in the same size and they sit way too far in with the +56 offset
@garyburrus9379
2 жыл бұрын
I just picked some up off of eBay. I made sure that they had good wheel studs installed. Look for 25mm 5x120.65 Camaro/Firebird spacers
@Rhettnorris09
2 жыл бұрын
@@garyburrus9379 im actually looking for these exact ones? Can you copy paste the link man?
@garyburrus9379
2 жыл бұрын
@@Rhettnorris09 here you are: www.ebay.com/itm/191672513853?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=5bJ2g5z3Sw6&sssrc=2349624&ssuid=9xN1V31TRVC&var=&widget_ver=artemis&media=COPY
Can I install four 20mm spacers on my 2011 SS with stock 20inc wheels ? Will this affect the turn of the front wheels?
If anyone is planning on doing this, use hub centric spacers. Lug centric is dangerous and not a good idea.
I had to purchase spacers because of rubbing as well. However, my aftermarket wheels don't have the cavities. I think I'll have to replace the factory lugs with shorter lugs. Do you have any other recommendations. Where did you purchase the drag bags? How exactly does it help your suspension?
@garyburrus9379
Жыл бұрын
If your lugs stick out a bit, the cheap and easy way to do it is to put on the spacer and use a sawzall to cut the lugs down. Replacing 20 wheel studs is a pain in the butt. I got the drag bags from Summit Racing (link below). What they do is prevent the wheels from coming up and rubbing on the wheel wells when you hit large bumps or have a heavy load in the car. My old tires had tons of cuts on the sidewall from rubbing. I have never had to put more than the minimum pressure in mine which is 7psi. Be warned, it's a b*tch to get the drag bag into the coil spring! www.summitracing.com/parts/air-60897/make/chevrolet/model/camaro/year/1995
@deanharris1739
Жыл бұрын
@@garyburrus9379 thank you
I have a 95 z28 as well, just bought bmw wheels. How did you get them to fit?