You definitely have to do floor jacks next!

@kennorcott7074

2 жыл бұрын

That and jack stands. Some of the most important tools to get right, because if you don’t it might kill you

@henryryan2896

2 жыл бұрын

Amen brother

@How2HateYT

2 жыл бұрын

Agreed! A jack off, if you will!

@KingENDLESS

2 жыл бұрын

Engine hoists 😳😳😳

@AdmissionGaming

2 жыл бұрын

This, just get Nolan to sit on them if they last dammmmmm.

Tool Party has become one of my favorite Donut series. 10/10

@htx_miguel__7628

2 жыл бұрын

Hi low 🥈

@derekdickinson2643

2 жыл бұрын

Same, but i miss science garage

@ayoo_peruca7430

2 жыл бұрын

Jamy and zack are so GOOOOOOOOOOOOD Together

@lo0nyt0onz

2 жыл бұрын

Being they hold vehicles up while you work on them...i wouldnt cheap out with them, esspecily if im working under it or putting stank under it.

@polarvision4048

2 жыл бұрын

@@derekdickinson2643 same 😞

I personally got the ep auto wrench as a gift for my birthday and instantly though “wow what a cheap pos”. But 2 years later it’s still going strong and is still just as accurate after many drops!

@Ardeact

Жыл бұрын

most cheap shit just lasts, like a walmart fan or a 2000s toyota

@JCintheBCC

Жыл бұрын

The EPAuto wrench looks exactly like my Tekton torque wrench. Since it's made in Taiwan, also, they might be the same factory. The Tekton rings in at whopping $65, but it comes with a lifetime warranty. Three years in, mine's still hitting spec no problem.

@LostSoulsmusic22

Жыл бұрын

I'm gonna have to save me some money and go with this one!

@yurilopes420

Жыл бұрын

@@Ardeact they're not really interested in having shit break so customers re-buy, because if a cheap piece of shit breaks we're just gonna get something different therefore, low cost shit usually is more reliable. specially since the diminishing returns makes anything worth considerably more not close to being worth it

@Ardeact

Жыл бұрын

@@yurilopes420 too long i can't read

As a young tradesman. I am currently working on building my tool arsenal and these reviews are kinda making my decisions somewhat rational! And probably saving me a lot of money. Thanks boys!

@anaveragesniper4846

11 ай бұрын

I recommend getting at least some quality ratchets so MAC, MATCO, CORNWELL, Snap-On. I would also recommend a quality battery 3/8s impact.

@mrbanana8082

10 ай бұрын

@@anaveragesniper4846bro don’t recommend matco when they just rebrand tools and sell them under matco brand for more money

@bubbafett2328

10 ай бұрын

Project farm is a good resource too

@no.7893

9 ай бұрын

Generally a good rule of thumb with tools is to buy cheap and replace expensive. If you use a tool enough to break it it's worth potentially investing in something more rugged since you know you'll get your money's worth out of it. Though that does fly in the face of the example set by the poor snap-on in this video lol

@Brendedn

9 ай бұрын

@@anaveragesniper4846 A battery impact has been a gamechanger. Completely untethered from an air compressor. Doesn't fit in all gaps that the pneumatic did but it's still what I'm using 80% of the time I use an impact.

Most surprised to learn torque wrenches have a break-in period. Seems like something that would be handled at the factory during assembly and quality control.

@itz_hunted3788

2 жыл бұрын

Allegedly. This video isn’t very methodical.

@kobysimmons6081

2 жыл бұрын

@@itz_hunted3788 youre not wrong but all three of them getting so much closer after being used is sorta in your face undeniable evidence that they benefit from being broken in

@abafoon604

2 жыл бұрын

Think about what thatd would do to the price

@lukemorris2888

2 жыл бұрын

It’s not about break in period, it’s actually just larger sample size. Check out “the law of large numbers” the more you record a statistic, it finds it’s true mean

@ForfeMac

2 жыл бұрын

It's not a break in, torque wrenches need a "warm up" to spread the lubricant around the mechanism. Normally not that big a deal if you're just doing lug nuts or subframe bolts or something, but if you're doing critical fasteners like head bolts or crank cap bolts you want to set it to a low torque and click it a few times

these guys are great together. the whole crew is damn entertaining

@purwantiallan5089

2 жыл бұрын

I appreciate this, 3D Ratio.

@robertmccabe1919

2 жыл бұрын

Probably the most fully entertaining car channel. A lot of channels are good but besides Donut and Cleetus I don't watch 100% of the videos

@jorgebustillos8469

2 жыл бұрын

I just want uncle Jerry to make a cameo

After a few of these videos you can tell the chemistry between these guyshas gotten much better. They're much more comfortable clowning on each other. Great episode

@jimmyswollnuts7662

Жыл бұрын

Gay

@mildly_miffed_man1414

Жыл бұрын

@@jimmyswollnuts7662 insecure masculinity

@thicniggazinc

Жыл бұрын

​@@jimmyswollnuts7662 imagine being insecure

@jacob1517

6 ай бұрын

⁠@@thicniggazincimagine making fun of someone who’s insecure

@1degRazz

4 ай бұрын

@@mildly_miffed_man1414 found the gay!

Feeling pretty good about going cheap on my last torque wrench last year with the EPAuto.

@rudydaberry122

Жыл бұрын

I’m a new diesel mechanic and I used to have a Mac torque wrench that my dad gave me but he asked for it back and now I need a new one. Is this one that you use good?

@wowimpeabass

Жыл бұрын

ive had the ep wrench for like 2 years and it’s still going strong after frequent use 👍🏽 it’s def the best for your money

For anyone wondering about the cheap wrench, it’s the best Amazon purchase i’ve ever made. I’ve been using it constantly for the better part of a year and it’s been great. Glad to know it’s been in spec this whole time :)

@andrewfox2647

2 жыл бұрын

Was searching the comments to see if anyone had the cheap one 👌😂

@GuillermoMontecelo

2 жыл бұрын

@@andrewfox2647 I too own the cheap one and I love it

@p24p14

2 жыл бұрын

Same! I have the 150 ft-lbs model and its awesome. Only complaint is that the little nut that locks the handle keeps coming loose while you tighten, I would much rather have a click in system like the other wrenches in the vid

@jackhughman282

2 жыл бұрын

@@p24p14 you can use some pliers to tighten it, that's what I do to keep it from spinning

@OddClancy

2 жыл бұрын

Anyone got a link??

Tip, use a ratchet strap or a snatchblock pulley system for the stress test so everyone can stay well clear of flying debris. Don't want you guys going blind, getting your teeth smashed etc

@keeganlytle6278

2 жыл бұрын

Yeah. It was a little irresponsible to assume none of them would break in a dangerous way, especially having bought a notably cheap one. Even if it wasn't the one that failed.

@akheilos23

2 жыл бұрын

@@keeganlytle6278 that's 🐱 shit and a waste of time

@tt7hvn

2 жыл бұрын

As soon as I saw them pulling it towards them on the over torque test, I was like, this is going to end badly.

@isellfreemoney9899

11 ай бұрын

or a hole in the chest 😬

Feel so bad for Henry and Jobe on this one man you could tell immediately how bad Zach felt afterwards man. Things like that happen in the gaaaraggee and it sucks but awesome y'all are such great friends. Couldn't imagine a better job than working with nothing but cool ass people man!

Thank you for this. I am so glad I watched this before buying my next torque wrench. I have kids that help me in my shop and on my channel so your tests are more real world than you might think. lol. My youngest was standing on my 350 ftlb torque a while back when I was putting back on an axle nut. Keep the great, informative, and entertaining content coming. You all are awesome.

Never would I imagine the cheapest torque wrench ended up being the best. Crazy. I bet you anything these things become more expensive effective as of right now.

@masterraceofeverything4504

2 жыл бұрын

anything American made is always dying to get more money out of pockets

@derpyhiro7234

2 жыл бұрын

The Icon is the best you can get, price wise and multiple tests have proven it has superior longevity in accuracy over strap on

@azhadahlami

2 жыл бұрын

Damn spoiler. Read it litteraly in the intro

@unclerukus484

2 жыл бұрын

But it’s not the best. The Snap-On is the best. But ya know, fuck American jobs because tHe tOrQuE WrEnCh DiDnT sUrVivE WiTh A cHeaTeR bAr oN tHe TiP oF ThE HaNdlE.

@mikejones590

2 жыл бұрын

There is more to tools than just strength, as the above states continued accuracy is arguably more important for someone who swings wrenches for a living.

Should try Jack Stands, and Ramps. Also Ratchet straps, they are vital for when you transport your track car... or custom built offroader

@Jo060

2 жыл бұрын

or transport anything.

@Hakkapell

2 жыл бұрын

Those are a lot less interesting to test because they have capacities and they're going to be over it.

@Aupexx

2 жыл бұрын

@@Hakkapell Depends if they just test static loads or also test shock and vibrational ones. as well as ones at different temperatures like "how well do the jacks do at sub zero vs +40 degrees C?" all useful info imo.

@chuckholmes2075

Жыл бұрын

jack stands are shit. I had a set of Heinz Werner crack at the welds while under a 3500

Disappointing performance from the snap on. Yes it's more accurate but I wouldn't have expected it to break so easily. Interesting tests at least 👍

@Stg4100

2 жыл бұрын

??? You put pipes on your torque wrenches?

@d4rkside_europe564

2 жыл бұрын

@@Stg4100 yes I do

@steveconor9463

2 жыл бұрын

I am honestly pretty sure alot of people do the pipe on tool I think car jacks might be to blame, as at least one design comes with a pipe for extra leverage.

@Meph7447

2 жыл бұрын

@@d4rkside_europe564 Then you need to upscale your torque wrench.. There's a reason why you find 1" drive 1000ftlb torque wrenches being 6 feet long and your 1/2" drive with a max 300 ftlb only being 2' 1/2". If you need more leverage to hit max torque on your wrench you either need to hit the gym or your over shooting your max torque and using the wrong tool.

@joshestess

2 жыл бұрын

Crush washers in a pinion is a bitch without a pipe on it

I luckily found y’all’s channel right when I started working on my truck. I had never changed oil before. Did it easily, working on the wiring my self and radiator. Need to get some tools as I have ALOT of work to do but it’s been fun and informative binge watching these and I got ideas on what to get thanks to y’all👌🏻 Thanks a lot!

@mtgering

Жыл бұрын

Don't forget to check out the local pawn shops in your area when you're looking for tools to add to your collection! Great places to find good tools on the cheap!

@jpeg619

Жыл бұрын

@@mtgering never thought of that! Good idea!!

cheap to expensive portable air compressors would be cool. you have durability, max psi tests, stuff like that.

@tbozzz8785

2 жыл бұрын

Max psi test...with their run of luck theyll blow them up and thatd be the end of donut

9:13, Click-type torque wrench (with a spring) needs to be "exercised" through its full range of settings after prolonged storage before use.

@bocahdongo7769

2 жыл бұрын

Glad Donut cover that

@jakestultz4798

2 жыл бұрын

Snap actions need to be exercised to the full scale of the wrench to dissipate any error within the spring and gearing mechanisms inside the wrench to get a truly accurate reading at specific test points

@jakestultz4798

2 жыл бұрын

Also depends on the accuracy of the torque calibrator they were using to determine the accuracy of the readings on the calibrator

@austinh1028

2 жыл бұрын

And what if you leave it cranked up to max torque? i've heard it can lose accuracy if you don't back it down to zero for storage (6mo+) and leave it at a high torque setting since it puts tension on the spring

@MrCROBosanceros

2 жыл бұрын

@@austinh1028 Actually click-type torque wrench should be stored at 20% of their maximum setting, not at zero (Usually, 20% of the maximum setting is the lowest scale setting). Storing at fully loaded torque wrench weakens the spring over time. If you completely offload the spring to the zero setting, other components within the wrench may move a little. This rule doesn't apply to Split-Beam Click-type torque wrench which doesn't have a spring.

By far one of your best series. Great work guys!

I really like these videos of both of you guys comparing tools! Keep making more videos like these!

8:00 You can tell they've been training their whole lives, *sometimes even twice a day* , for this moment

10:25 I knew the pipe not being on all the way was kinda sketchy but I never thought THAT was going to happen. That stress riser must have been insane

@joey_f4ke238

2 жыл бұрын

@@Lofi.z34 The pipe was only covering the handle in all three, it was most likely a faulty one, either that or a significant design flaw

@lulzywizard7576

2 жыл бұрын

broke at 258. earlier in the intro for it, they showed it was only rated to go up to 150. still, that's sketchy how early that broke

@bmxrichard21

2 жыл бұрын

@@lulzywizard7576 Yeh, but hands up everyone, who used torque wrench as not recommended. I bent a few or the mechanism broke, none became a slingshot. This is a major security risk in design. __________ Even in US law, I guess there is something about the fact that the manufacturer must take into account the use within the established practice, not the use only exactly according to the instructions. (I heard it on the Legal Eagle channel, I don't live in the US and I don't know US laws.) For $ 450 a pretty bad product...

@lulzywizard7576

2 жыл бұрын

@@bmxrichard21 i'm pretty sure 172% of the limit specified on the box should be enough to absolve said company of issues resulting from the misuse of its product. just about doubling the recommended maximum that it's supposed to be used for is kinda yikes. that said, they picked a more expensive, but less heavy duty option for the pricier one

@Mefdash

2 жыл бұрын

Wrench pipes slaps jerry. );

I hope Henry is ok! This video is great since torque wrenches are so important and I’m planning on buying one soon too! 😂 good to know I can get away with (and my even be better of with) a decent cheap one. Thanks guys!

This was cool to watch because I'm a calibration technician and that's exactly how we test torque wrenches. We just have a machine that you crank the handle and it runs the torque wrench up to get a more consistent pop. I will say from my experience, Snap-On and CDI make the best torque wrenches.

@deathmetaldownhiller7874

2 жыл бұрын

Do you service and calibrate all brands? Who's the worst in your experience?

@acidsurprise

2 жыл бұрын

@@deathmetaldownhiller7874 So I service and calibrate a lot of different brands, it all depends on what different clients send in. As for the worst brand, I'd have to say Proto or Craftsman. Protos seem to start to become out of tolerance at about the 12-month mark and need adjusted which can be somewhat difficult on those. Craftsman is just bad. We typically put all torque wrenches on a 6 or 12-month cycle but Craftsman we put on about 3-months. I don't know what it is about them, but some of those torque wrenches won't get used more than once or twice per month and they'll constantly need adjustments. Most of the time the clients just have us fail them and they replace it with another one. If you're going to get a torque wrench for work, I would use Snap-On and CDI.

@suzysuzuki8865

Жыл бұрын

I have the half in and 3/8 digital snap on torque wrenches and I absolutely love them. The only snap on tools I don’t regret buying honestly lol

@nunosimoes6045

Жыл бұрын

Did you ever tested Tohnichi torque wrenches?

@acidsurprise

Жыл бұрын

@@nunosimoes6045 I've tested a few but not a lot of them. I think in the last year I've tested maybe 5 or 6 of them. I don't really have enough experience with them to form an opinion on them.

The snap on almost killing you sounds about right. They are made to break so they can sell more when their truck comes around

@PointlessDrummer

2 жыл бұрын

but most of their tools have a lifetime warranty. I just dont understand why its always the snapon shit thats bad

@Gabiffle

2 жыл бұрын

@@PointlessDrummer It's planned obsolescence, they design them so that they break at the limit, basically the apple of tools, especially since lots of their tools don't have the lifetime guarantee

@Illness.og.

2 жыл бұрын

@@PointlessDrummer they do it on purpose

@neovenom9833

2 жыл бұрын

@@PointlessDrummer this one had a 12 month warranty.

@TerribleUsernameAmirite

2 жыл бұрын

Snap-on more like snap-apart

I've heard that military techs do some "break in" method by clicking them at full torque a couple of times before usage so it definitely is plausible they need some light break in

@Ben-Rogue

2 жыл бұрын

It could also be to test reliability perhaps? Like a shakedown run to make sure nothing is gonna break, before you need to rely on it in the field.

@bazzjay

2 жыл бұрын

A torque wrench that was my Grandpas, then my Dads, is now mine, so its pretty old maybe 40 years or more. It does say in its manual that you should give it a few clicks to get the grease to move after sitting for a while to make sure its more accurate. It wasn't much of a surprise to me after they started doing a bit of a break in and they became more accurate.

@RedCat2299

2 жыл бұрын

In aircraft maintenance when we check out a torque wrench, we are supposed to set it to the highest setting and get it to click 6 times. This warms the lubricant in the wrench and forces it across the mechanism in the wrench, thus increasing overall accuracy. We have a plate with sockets of different drive sizes weld to it and then bolted to a heavy steel table

@GhostAlpha10

2 жыл бұрын

Yep six times at full torque

@az_3kgt714

2 жыл бұрын

military ctk's also send their torque wrenches out for calibration like every 6-months. And they have a policy of never using the bottom 5% of the scale because thats where they are the least accurate. From a usaf aircraft technician

Not the first time I’ve seen snap on tools fail. Seen many failures on many of their tools. Good thing about them is they either fix them or replace them. With the exception of a few tools. Torque wrench being one of them after one year die to it being a precision tool. Great video. Thanks.

At my job as a machinist, we use a torque wrench similar to the $45 one and it works great. In our case, we use it to consistently torque the vises. Some parts only need a few ft-lbs, and some need a lot more. For what we use it for, it gets the job done!

I am in calibration. I have calibrated torque wrenches. This is simultaneously the best thing to watch and the worst lol. I have always wanted to do the "physical reliability" test you have done here when a wrench is not passing...otherwise I have some of my personal experience to share below if you all are interested. Something for the future maybe: Use multiple operators to show operator variability, Take data sets of like 30 readings per operator to smooth out the data collected - an erroneous reading once or twice has less impact in a data set of 30 points than it would in 5 points. In the Army, we have typically tested wrenches at 20%, 60%, and 100% of full scale torque for calibrations. Have the wrench mounted at as close to parallel with the floor as possible to minimize the torque gravity is applying and to prevent the tester from accidentally applying to much torque when testing the desired torque setting. Manufacturers might have a "calibration" cert for the wrench when you buy it. This can quickly become a slippery slope of B.S. but verify the accreditation (if any), the calibration points (if any), etc., - basically trust but verify. Make sure you hold the wrench while torquing it from the handle ONLY and nowhere closer as you are technically applying more torque than the setting any other way, though for smaller value torque wrenches this is more of an issue (say 8 or 12 in/lbs.). Maybe have your breaker bar further up on the wrench when you are testing higher torques so you decrease the chances of catastrophic damage to the wrench and flying metal components? I could probably go on but I just want to say, this is still a very good test you all did. I like your guys' content and keep it up! My intent here is to provide some tips to help you all refine your craft. Awesome job.

@liamtaylor2560

2 жыл бұрын

I would think you mean perpendicular to the floor...and sure their testing methodology could be better but it's tone deaf to think a video from doughnut media is going to be in any more detail than the average Joe can understand. Leave the in depth testing to channels better suited.

@t_skr

2 жыл бұрын

Great comment

@calebnasiatka5711

2 жыл бұрын

If you want in-depth tool testing Project Farm is the channel to go to. Donut is a fun entertaining and informative channel.

@graham1034

2 жыл бұрын

@@calebnasiatka5711 Project Farm has a torque wrench comparo that includes 2 of the 3 from this video as well as a bunch of others: kzread.info/dash/bejne/eoRo16d8n6uek8Y.html

@bocahdongo7769

2 жыл бұрын

Dunno man, showing the multiple usage test is already appreciate enough for me.

According to the graphic during unboxing the Snap-On is only rated to 150ftlb. Still not great considering the others held up to more overages, but may be the reason it broke.

@tjkj-om9oi

2 жыл бұрын

Doing a "torture" test means nothings and if the tool breaks outside what it was designed to do you can not say it's bad. I have Snap on torque wrenches that are still in calibration(checked yearly) and almost 15 years old and get a fair amount of use. They are just more accurate all of the time compared to the stuff. You gotta be real close when dealing with TTY bolts.

@home541_

2 жыл бұрын

@@tjkj-om9oi I have a snap on twin beam and digital. I’ve had them both for almost 5 years now. I use the twin beam daily and the digital when it’s needed. I don’t overload my stuff so they last. I’ve also heard some weird shit about icons warranty

@tjkj-om9oi

2 жыл бұрын

@@home541_ Yeah I have both the 3/8" and 1/2" Snap on digitals, must haves when dealing with TTY bolts.

@home541_

2 жыл бұрын

@@tjkj-om9oi I got the cornwell digital 1/4 and 3/8. Only issue I have with them is there isn’t an easy to see counter. You have to go back through the memory and count yourself. I have the snap on 1/2” digital I bought when I was doing heads on a BMW and love the thing. They were 80 NM followed by 2 stages of 80° or some shit like that. I have their twin beam for my wheel wrench

@Bobodododo

2 жыл бұрын

@@tjkj-om9oi it’s a great test for quality though which is the whole purpose of this series. If something can work after being stressed far out of its zone, that means it’s insanely high quality, even if it’s not designed to be used that high.

Went from Snap-on to Snap-off.

Thanks Donut!!! I asked 4 this episode and so happy u guys had it planned!

I'd love to see someone do the same test with the Milwaukee electric digital torque wrench versus snap-on digital torque wrench

@renaokawa6199

2 жыл бұрын

Can add a husky one in there too for the cheaper option.

@pumpmech2265

2 жыл бұрын

Huh didn't know husky has an electric makes me wonder about hart

@Coolfwip

2 жыл бұрын

this is honestly what i was expecting when i saw the video title

@iWubmusic

2 жыл бұрын

bro they are snap on haters of course theu will find a way for the snap on to lose lmao

@DK.Adventures

2 жыл бұрын

@@iWubmusic it literally blew apart when doing the same test as the others tho

Love this show. This show puts a smile on my face every Wednsday. Thanks Jerry and Jobe for the great entertainment.

im actually very happy with this series.. im going to buy one from ebay motors so im not struggling on the side of the highway

It's the flex head design on the Icon. It needs to be stationary like pretty much every other T wrench In the universe.

These tool videos help me a lot, thanks for all the tips and tricks guys!

I think we should have done one more test. The "I forgot to untorque my torque wrench" test, and leave it there for a month and come back to it. I have the same epauto wrench and I have constantly forgotten to untorque it. I hope my 80ft-lb on the wheel nut actually still is 80 now

@jacobh.7076

2 жыл бұрын

you're suppose to untorque your torque wrenches????

@johnseyler5893

2 жыл бұрын

@@jacobh.7076 yes. Set to lowest setting after each use

@rblbatb

2 жыл бұрын

I had no idea I was supposed to do that ..

@joefangtastic

2 жыл бұрын

@@rblbatb me neither!

@williamhussey1611

2 жыл бұрын

@@johnseyler5893 shit

Love this series

These tool videos are really good. Keep making them please!!

For the torture test you should see how they before while having dirt or sand in or on them. Great episode!

@jakeencinas2389

Жыл бұрын

Why? When are they ever used in those conditions?

@truethat7351

Жыл бұрын

@@jakeencinas2389 when I drop them in my bnackyard

Really enjoying Tool Party. Jobe and Jerry are a great duo.

@thatgamingchannel95

2 жыл бұрын

they're a match made in heaven!

@ultraguy8771

2 жыл бұрын

Some bot copied your comment.

@thatgamingchannel95

2 жыл бұрын

@@ultraguy8771 fcking bots, annoying af

I love these simple videos with testing products

Love the series, you guys were hilarious

Ooooh, test all the gimmicky tools at harbor freight! The extendable breaker bars look goofy as hell, and i'm not brave enough to test them.

@Beary98

2 жыл бұрын

We have a 3/8 extendable ratchet that I haven't broken yet... definitely abused the hell out of it. I do question the extendable breaker bar tho. However, I've stuck 4 feet of extra bar off the end of a normal 1/2 breaker and haven't broken that yet... sooo maybe?

@TySchmidt

2 жыл бұрын

Their Quinn hardened steel soft grip bottle opener is fantastic. Hasn't let me down yet. Absolute steal for $2

@LIKEcommentANDsubscribe

2 жыл бұрын

@@TySchmidt lol i bought it yesterday!

@LIKEcommentANDsubscribe

2 жыл бұрын

@@Beary98 i broke my 18 inch flexhead ratcheting "breaker bar" on the first use. I was taking off suspension bolts that were 200-250 foot pounds and the head EXPLODED! Scared the shit out of me.

@sebastienceniceros3145

2 жыл бұрын

@@LIKEcommentANDsubscribe well yeah, you used a ratcheting breaker bar on shit torqued to 200 ftlbs. Why wouldn't you use a normal breaker bar?

I worked at an engineering company that made these torque wrenches for snap-on and the worst employees were always sent there to work... It was actually a joke among us that we were gonna be sent to the Snap-on department if we slip up🤣 yeah, I definitely don't think they're worth the $500 they ask for.. pretty hilarious it broke too. From what I remember they were made by temp workers who would often leave work orders half completed. Definitely not a mark of quality lol

@Azathoth43

2 жыл бұрын

What's the name of the engineering company? Want to make sure I never buy anything made from them.

@REAPER-iu7dn

2 жыл бұрын

Fr

@MrCROBosanceros

2 жыл бұрын

First, I don't believe anything you wrote here. I believe that Snap-on tools are one of the most expensive professional tools on the market and they are made to the highest standard. Snap-on would cancel a contract with any company that doesn't make products to Snap-on standards. I often see on KZread comments like Snap-on wrenches or sockets are breaking everywhere! Really! I never cared about Snap-on tools and I didn't like their polished finish, I lived in denial. Snap-on and Proto too, wrenches, sockets, extensions, breaker bars, ratchets, and handles are the best mechanical tools you can buy or one of the best. I worked for the bus services of Greater Vancouver public transit on Canada's west coast. We own and service thousands of buses. Our mechanics use mostly Snap-on tools. Even those mechanics who don't care about the best tools are having a few Snap-on tools. Our company is using only Snap-on torque wrenches. I often see returned broken tools with signs, next time get Snap-on but I never ever heard a mechanic say, Snap-on tools are breaking all over the place! Do you ever see heavy-duty mechanics using Icon or similar tools? If you really work in a company that produces any kind of tools or instruments and you or your co-workers are behaving like that, I can tell you that you people are airheads without any morals. You are not hearting only Snap-on, you are hearting hard-working people who buy and use those tools.

@TheRyujinLP

2 жыл бұрын

While I have never worked for Snap-On I have had a roommate that did. I also work for a company that's like maybe half a mile away from Snap-On and they have a very similar way of treating workers. At lest currently. In both jobs cases there was a marked difference between when the original owners ran them and when they retired. Cost cutting by driving out experience workers and promoting based on ass kissing became the norm (when I started even for the most basic job you had to pass a decent math test to even be considered, now that test is no longer used and the less English you speak the better your odds of getting hired is. Hell on of the shifts hired someone that they said was not intelligent to do their job, which only need a high school level of mathematics, so they instead tasked them with matching orders to parts.... which is a job that requires you to have some degree of common sense and to pay attention since the other departments that make the orders fuck up a lot so I have no idea why they did that. Now every day we have to double check ever job that was worked on before we start to make sure we're not sending out the wrong parts since the orders now are almost always miss matched!). Needless to say all the experienced workers both in production and management left, some taking 30 years or more experience with them. Now the average worker is a temp who barely lasts to the end of their contract and if you don't work for a shift that had contact with the higher ups so you can grease the wheels by brown nosing them then your stay there is going to suck. So if you wonder why quality is going down the shitter it's because the current corporate culture values treating their workers like they are disposable and promoting based on nepotism rather then merit.

@joey9511

2 жыл бұрын

@@MrCROBosanceros professional mechanic here. People use Snap-on for the customer service, ease of replacement and easy financing not the superior quality. You can weld 2 wrenches together and the tool truck will replace them same day free of charge no questions asked. If harbor freight had a reliable tool truck with the same warranty 90% of all mechanics would be using them instead. There is little to no difference in quality from basically any modern tools besides electronic/ air tools.

For DIY-scale use I LOVE my Craftsman clicker wrench....the handle is super comfortable. Got it on sale for $50 (back when Sears was still a thing) and still goin' strong

This was some good watchin. Nice work chaps.

One difference I noticed is that the more expensive ratchets are flex head whereas the cheaper one isn't. While flex heads are more convenient, they are loads more fragile than even a cheaper torque wrench so to me it's no surprise that the cheap wrench outlasted the other two. I guarantee if you got a non flex head icon wrench (maybe not the snap-on since it didn't even fail at the head), it would be a lot closer.

@yongling9825

2 жыл бұрын

I've never seen a torque wrench with a flex head and I never considered getting one with it. Torque tools are supposed to have little moving parts to transfer torque effectively and accurately. If it's on a ratchet wrench, that's OK.

@rusty815

2 жыл бұрын

@@yongling9825 they're fine if you're not torturing them or over-torqueing them, but obviously in a torture test they're just not going to hold up. I own both a regular and flex head torque wrench and only really use the flex head when im torqueing something in an odd or hard to reach spot.

@txmits507

2 жыл бұрын

@@yongling9825 there are a few bolts that you just cant use a straight 1/2 torque wrench on. you either start throwing extenders on, or you wing it. 150 is a bit much for a secondary torque wrench though, at least for a lot of people.

@joeyhildebrand7657

2 жыл бұрын

I don’t get it a 50-250 1/2 snap on is $450 so why did they compare one not in the same range

@MrGhoulie

2 жыл бұрын

You’re absolutely right. I had a stuck lug nut and couldn’t get it off with a flex head breaker bar. Swapped it for a non flex head of the same length and I got the bolt. The more rigidity and stiffness in the solid piece gave me that extra torque I needed. I imagine with the flex head on a torque wrench over time would get a little bit looser and the give will have a less accurate result

As an owner of a Snap-On torque wrench (albeit a different style of one) they’re aight. Not really worth the extra money unless you’re brand loyal or probably gonna use it very little.

@toad3222

2 жыл бұрын

Why spend lot money if not use a lot

@Illness.og.

2 жыл бұрын

@@toad3222 bragging rights and idiocy

@jordanvalenti3521

2 жыл бұрын

@@toad3222 because I was new to the whole “buying tools off of the tool truck” thing and the snap-on guy knew that.

@WhatsanEngler

2 жыл бұрын

What would you recommend as a comparable brand that doesn’t cost and arm and a leg? In your opinion?

@BeIlows

2 жыл бұрын

Copium at it's finest

You guys are absolutely the most pleasant youtuber ever exist. I love your videos. While you guys are so fun at the same time showing the absolutely true quality and performance of each tool. I can not say enough positive about you. Thank you. 🤩

One of my favorite new donut shows 🤙💛

Since you have that fancy calibration tool, I'm really curious to see what happens if you crank each wrench to its 250 ft-lbs setting, then leave it in the case for a week before testing it again. Hopefully we all know that's bad, but who hasn't accidentally left their wrench dialed up once or twice? I'd love to see how each one handles it. Well, except the Snap-on, I guess :(

@geemy9675

2 жыл бұрын

I didn't know..

@leonardogalindo3324

2 жыл бұрын

@@geemy9675 I didn't know either 😅

@kylemartin5000

2 жыл бұрын

Not true. Like springs on a car, or in a magazine for a gun, springs wear out from constant compression and relief. Ideally you should leave some compression on your torque wrench to avoid completely relieving the spring tension. I keep mine at about ~20 to 30 lb ft on my Matco click style 1/2”. Hasn’t skipped a beat in 10 years.

@gabemccoy

2 жыл бұрын

@@kylemartin5000 The Snap-on manual says to always store a wrench at its lowest setting. While I agree with you from a fatigue failure standpoint, the application in a torque wrench, where the goal is precise load, is much different from automotive suspension or firearms. All the more reason I'd love to see it tested!

@TheRealElmoSkateTeam

2 жыл бұрын

@@kylemartin5000 unless you drop it. Need to send my snapon in again to get fixed. It's about 5 pounds off now due to me being a dumbass

Nice video, but I am missing some information on the spread of the measurements. Besides average accuracy, I think repeatibility is very important. I'd rather have all my cilinderhead bolts at lets say, 102 nm, than a few at 98, some at 100 and another few at 101 nm.

@ItsKing32

2 жыл бұрын

Yea from my findings (and project farm’s torque wrench video) Snap-on will almost always give u more repeatable results

@AaronShenghao

2 жыл бұрын

Yeah they should give stranded deviation too.

@forrestcarroll9350

2 жыл бұрын

Given the inherent inaccuracy of measuring bolt tension from tightening torque, a difference of a _few_ Nm is not a big deal let alone one or two Nm. If you're that worried about the actual bolt tension use a stretch gauge. It's basically the only repeatable method there is

@Atomicriffmaster

2 жыл бұрын

Imagine having such blind brand loyalty that you’ll go to incredible lengths to defend them even in the face of proof that it is, in this instance, an inferior product. Spending literally 10x more on a tool because it has words you like on it, does NOT make you a better mechanic. It just doesn’t. You either take this video at face value, or you blindly defend an inferior product 🤷‍♂️

@wpprrz

2 жыл бұрын

Uh, isn't average indicative enough of a form of repeatability for you?

Loved this episode/serie$

This was actually super interesting! Thanks for such a quality video!

Day 361 of asking Donut to bring old B2B back

@angelnikolov2792

2 жыл бұрын

Cmon we need this

Not especially torque wrenches but on other tools you should also test if the rubber handles dissolve in gasoline. I had several cheap chinese screwdrivers that literally fell apart in my hand when fixing carburetors.

@matepap5816

2 жыл бұрын

Yeah, that would be awesome!

@tlars515

2 жыл бұрын

I left a set of Doyle (harbor freight) screw drivers in a bucket of gas for a few days. The coating kind of rubbed off but they still work just fine

Specifically got an EpAuto torque wrench that was on sale due to this review. Ty Donut!

Love these videos about tools

You know, as for the accuracy, the average means nothing if your reading are all over the place. You really should include the standard deviation as well

@vampirwrr

2 жыл бұрын

its not a metrology channel

A lot of torque wrenches say you need to set them at their lowest setting or close to for long term storage. I know it wouldn’t be exciting to film but maybe set the ones that survived to their highest setting and leave them for awhile then see how they do again. I’d be interested to see how much it affects their accuracy if at all.

One of the funnier episodes I've seen. I lost it when they were doing 420 reps at 100 ft*lbs

great review. thanks

Amazing! Thank you! I was in the market for a torque wrench and I was debating which would be the best for my applications/needs..keep up the good work!

i remember my dad would buy tools here and there and i would be like wow what a waste of money you rarely use them and now i'm glad he has so many tools because i can just borrow them from him lmao

@blahorgaslisk7763

2 жыл бұрын

Use them while they last. My father had a lot of great tools, but as he aged he stopped taking care of them. When he died most of it was either lost or broken in some way. Feels kind of sad as a lot of these tools were things I remembered from when I was a kid. His father was a furniture carpenter who made works of art. So my dad learned how to make pretty much anything from wood and for him the chisels were close to holy. He always kept them in immaculate condition, perfectly sharp and woe anyone who misused one of his chisels. What he left behind was chipped chisels that looked like they had been sharpened using a file. I still have them, though I've cleaned up a few of them somewhat I know they would not have met his standard as they were when I grew up. Still there's memories there even if the tools are busted.

One of the most hilarious Donut videos in a while

Tool party has quickly become my favorite segment 😂😂😂

TOOL PARTY TIME!! Great idea to put Jobe and Jerry together, keep it up Donut!!

I definitely think you forgot a very important test. Testing the variability of each wrench. The average may be close to a specific range but doesn’t mean that all of the runs were good.

@Wpjgdmtu

2 жыл бұрын

Came down to see if someone else had said this. The average value really isn't important here, it's the variance.

I bought an EPAuto wrench about 2 years ago and the thing is still going strong. I love it and for the price and after this video? Definitely gonna appreciate it more lol.

Very cool video guys, lots of good info here. As a previous technician and snap on dealer, I can say honestly, save your money when it comes to torque wrenches. Torque wrenches are not used as often as a 10mm socket so I’d say spend your hard earned cash on what you use most frequently. I think snap on hand tools are still the best by far, and a worthy investment for a professional mechanic. However, for the weekend warrior and enthusiast, a nearly full tool cart or a lot of fuel can be had for $450.

Tool party has become one of my favorite shows you guys do keep it up!

In the future could you guys also track min/max values? With things like torque wrenches consistency is also important, and it would be good to see if certain wrenches average consistently, but still have strong outliers on a case by case basis.

We need more of these asap!

Another great vid guys! Loved the series with both of you! Also, how tall is Jeremiah? He looks really tall in this vid!

To be fair, over torqueing a torque wrench is the definition of misuse... 😅 What about long-term storage with the spring whind upp?

@evictioncarpentry2628

2 жыл бұрын

To be fair, it was over torqued by 8 foot lbs. Lol Snap on is garbage.

@aaronkennedy6634

2 жыл бұрын

@@evictioncarpentry2628 to be fair, this tool had a cheater bar out at the weakest point of the torque wrench. Snap on sells bigger half inch torque wrenches. They chose to use the smallest one

Thank you guys for posting while I’m going to sleep. I get to go sleep watching Donut Media‘s torque wrench stress test.

Love these! Keep it up!!

Hilarious and informative! Great episode!

dang this was a good one! I didn't even think about the tools breaking in, big duh. I really didnt expect Snap On to be SO precise, but they def put big money in R&D to get that close. But, for a guy like me, who just builds crap and fixes crap here and there (not professionally), the cheapo stuff has been fine for me, hell i even worked as a mechanic for several years with my cheap tools and rarely had problems. Bravo, great episode.

These are so great in ALL aspects. Especially how the whole crew works together, keeps these coming.

My QD series torque wrench is the only snap on tool i would recommend, it came with a certificate of calibration with the results. Including counter clockwise torque. Mine tested at +/- 4%. Hoping for good results. It would be interesting to see how snap on's digital torque wrenches tested.

You gotta do more tests like this pure class ✌️♥️👌🫡

I will say the snap on is the most accurate out of them with icon falling in second. The snap on head is lifetime the handle is 12 months.

@Kartkid12345

2 жыл бұрын

Most truck drivers will help you out if it starts to lose proper torque

@leezynotyeezy2140

2 жыл бұрын

So the most important part? LOL

@RaccKL

2 жыл бұрын

@@leezynotyeezy2140 the head it the most important part. Anyone can recalibrate a torque wrench. If you break on your using it wrong. As a professional I’ve tried a deal of them and so have my buddies and Snap-on ones win the top spot for accuracy and accuracy over time, durability and quality.

I have a 1/2” and 1/4” drive version of the epauto. This testing has shown me that they’re definitely good enough for me.

Man i cant enough of this show!

Your short commercials that donut media does during the video, they are great! You should do commercials full time!

Can you guys do the electric ratchets?? See how strong they are, always get scared of over tightening and burning the motor out

@ItsKing32

2 жыл бұрын

I mean atleast for my Milwaukee its just a normal ratchet after the motor can produce more torque so really as long as u arent doing crazy high torque loads like over 250 probably ull be fine

@ItsKing32

2 жыл бұрын

But I highly highly recommend checking out project farm’s youtube whenever your buying tools hes amazing at testing tools

@ItsKing32

2 жыл бұрын

kzread.info/dash/bejne/qGdq2ZNterTVpcY.html thats his video on testing electric ratchets

@Natepwnsu

2 жыл бұрын

Project farm. KZread. They didn't create this idea to say the least. He actually tests stuff this is just sillyness mostly

@spencero3278

2 жыл бұрын

I snapped the drive pin in one of my Amazon specials before the motor gave out. Hint: don't use it to torque the bolts after the motor wimps out 🤣

**several torque wrenches were harmed during the making of this video**

I have a newer style click type from snap-on and it’s been solid for the 10 years I’ve had it. Can’t complain

I need more videos with these two guys togeather

The clicking of the torque wrenches was a symphony to my mechanic ears!

To be fair to the Snap-On, if your details are correct then its maximum torque is 150lb-ft and pushing it in excess of 250lb-ft is bound to break it....

@liamhyland3939

2 жыл бұрын

I was gonna say something. Glad you did. The box said 150 max for the snap on didn’t it?

@antwhite90

2 жыл бұрын

@@liamhyland3939 looking back at the video now there’s nothing on the box aside from a part number of QE3R250 which relates to a 50-250lb-ft torque wrench so I think they just got the details wrong… as for why it broke who knows? Like he said could have been the awkward leverage he had on the handle.

Their parents must be so proud that these brothers actually get along, and work together even.

Please don't use the average when trying to benchmark something like that. If half the values were above the rating and half below, you'd get an average that is within spec even if the tool isn't. Please list max and min, or better yet box and wisker plot or if that's too complex just show a graph of all values

@akfin4763

2 жыл бұрын

Or use standard deviation

@zach.jordan

2 жыл бұрын

I was hoping someone commented this

@EKUL34

2 жыл бұрын

@@akfin4763 while standard deviation is great it might be a little too complex for a general audience to grasp. Addtionally I feel min and max values are more important to show the +- tolerance of the tool. To show how loose your loosest bolt would be and how tight the tightest bolt would be.

Can't stress enough how much I love this show!

This is great, I'd been interested to see the distribution of the data. Does the misuse lead to more variability?

@meeman7896

2 жыл бұрын

For sure. Would love if they put out all the info for every test

@warummussmeinnameangegeben6502

2 жыл бұрын

Ahhh a statistics nerd - good question!

@sjorsangevare

2 жыл бұрын

Yeah, standard deviation is a way better measure for this test than just average. Shame they didn't show that

ngl epauto always lives up and beyond my expectations

I like this new show a lot. I like the car vids, but I’m not necessarily a huge car guy. But the tools can relate to everybody(: