$400 Home Made Go Kart (START TO FINISH)
Автокөліктер мен көлік құралдары
Thanks for tuning in to my longest video to date! The recent support on my channel has been a game changer, and I can't wait to share what's coming next!
Visit Evolution for all your power tool needs! ( aspireiq.go2cloud.org/aff_c?of...)
USE CODE: JSHERWOOD
FOR MORE:
► / jacob.sherwood
► / jacobsherwood37
► / crazybuilder37
► / crazybuilder37
Пікірлер: 130
If only nursing homes had these types of mobility scooters… All jokes aside, sick build!
@e30maniak
2 жыл бұрын
🙋♂️
@JacobSherwood
2 жыл бұрын
Creating a petition for this 🤣 much love boys
@throttle_therapy
2 жыл бұрын
If nursing homes had these id be visiting grandma every day
@lunchboxnavarrete5656
Жыл бұрын
@@JacobSherwood your hard work has inspired me to try and make a small go kart almost like yours I’ve watched your video a couple of times have you had the chance to make the jig if so do you have the dimensions for the kart I’d be so much help for my project .also the camber on the front tires looks awesome what angle did you use and how is that working out 😅
@Lakeside-Motors
7 ай бұрын
@@throttle_therapy underrated coment
If you get your caster angle closer to zero you won't lift a tire at lock. You may not snap back to center as well but you're not trying to go straight. Awesome build
So grateful for this video, I have been itching to build one but had close to 0 references. Thanks
What are thw dimensions of this build? And how wide is the wheelbase?🤔 nice build anyways!🤩👍
Soooo sick!!! Keep up the hour long vids I love binge watching good vids that are longer
Love these little drift carts, hope Car make Revive or someone else puts them into production soon. Sort the steering out and it'll be even better.
Build looks super cool🤙🏽
Awesome job. Keep up the great craftsmanship and hard work my friend. Fab On. Weld On. Keep Making. God bless.
@JacobSherwood
2 жыл бұрын
Thanks for the support! Cheers 🤝🔥
Jacob You're Driftkart God, keep it up! Bro much love as allways from Poland ❤
@JacobSherwood
2 жыл бұрын
Much love bro 💜
Very cool project. Makes me want one.
If you built it like 1 size bigger you defo could've put a torque converter on it and maybe even done a front engine setup in an attempt to take some load off the rears and spin the tires without sleeves. Also, sprung front hubs would allow the kart to keep all 4 tires touching instead of the castor angle raising a corner of the frame, so that might've helped, too.
Seriously Awesome!
What is you wheel base, and width on the scooter? Great job on the build.
Sick build .
Great build 👍🏻 do you have plans for sale for this build??
COOL AF !!!! 🤙
I love it! Is there name for this type of build? Thanks in advance!
I used a Shorter intake manifold with pulse fitting on top of it so my carb sits closer to engine. Works super well. Just search up This -> 475INT Mikuni PZ/VM intake manifold made by EC Carburetors
Can't wait to see more videos
Hey man is a awesome build. Is there anyway you can send me a plan with the dimensions for the chassis
Can u make a tutorial how to build the axle?👍
@Jacob what degree did u make the front spindles ?
What an awesome video! Made me want to get one ! What are the dimensions on these Karts? Thank you in advance.
Do you know where I can get a set up like this i looking for a kit to build
Well done would you sell some sizes or plans thanx
You should totally do a drift trike!! That could be such a good build
am i the only one who thinks it would be soo cool to make a go kart with a proper body like a car or add a body to an existing kart
ive seen a few of these mini drift karts on utube i been looking for build plans as id love to make a few when i get some land for me n m8s to have drift days
Amazing
Would love some more info on the dimensions/wheelbase and axle. Would be cool if you could add that
Got some basic measurements of the frame to share?
What size tubing is that? 1-1/4” 0.065”?
Been waiting a min for a new vid
@JacobSherwood
2 жыл бұрын
Appreciate the patience!! This a good one
@ranger6779
2 жыл бұрын
@@JacobSherwood bro it was. I really dig the hr vids. I know they arent for most but im 3rd shift. We need that go kart content bro!!
excellent!!!!! good job
So cool! Do you sell them?
Guys please tell me from where you got the frame
Awesome build dude ! Any chance of getting the measurements of the lower part of the frame length and width and height from lower frame to underneath the seat ? Appreciate it dude 👌🏻🤘🏻🤘🏻😎
для дрит карта не нужен угол наклона передних колес, так всегда теряешь управляемость. Для обычного карта, угол нужен для разгрузки оси и сохранения резины. for a drift card, you do not need the angle of inclination of the front wheels, so you always lose control. For conventional karting, the angle is needed to unload the axle and preserve the rubber.
Where to buy those part ? TKS!!
What is the length of the axle?
where do you get your tyres from?
So is there like some specific meshes that you build this frame from or did you like just guess your way through it all ??? … reason why I’m asking is that I’ll likely to build one myself but I don’t have any measurements to go from
Any information about this build?
How many degrees of caster did you use for your front suspension?
@JacobSherwood
2 жыл бұрын
I run 7°
Sick build bro. I've been wondering for a while now What kind of welder do you use? And did you go to welding school?
@JacobSherwood
2 жыл бұрын
I use a Hobart handler 140 on gas mig. Self taught baby!
@jess508
2 жыл бұрын
Beautiful bro. Thanks for the reply big dawg Have a good day
bro where to buy the ball bearings, tires and axes and stuff like that
Where do you find parts for your drift kart? A lot of the spindles and bearings aren’t universal and can’t find parts for mine anywhere
@JacobSherwood
2 жыл бұрын
Bmikarts, cometkartsales, Fastech racing
Do you know anywhere I could get a frame like your drift kart I don’t have a welder and have been looking for a frame for a few months now
@That-steelers-fan
4 ай бұрын
He custom made it
Nice! what size tubing did you use?
What size sprocket?? Plz Realllly need to know 😫😫😫
Where did you get your table
Nice n gnarly
Ten horses are hiding inside of the go kart!!!!!!!!!
I got a cart just like yours Jacob
@JacobSherwood
2 жыл бұрын
Welcome to the club 😎
What is the caster and camber spec? Thanks. Cool builds
@paradiselost9946
8 ай бұрын
eyeballed? guesstimated? i saw no akermans compensation. or worse. it was reverse akermans. i saw terrible scrub steer radius. vertical kingpins? wheres the inclination? wheres the line to the center of contact? you wanna copy badly designed and faulty steering geometry, go for it. you want control and useability? dont copy this layout.
Where do you find your rims and tires. In Canada trying to find them under 200$ is hard.
Hey how much for a frame like tha
Hey bro love watching your videos what size tubing you use.
What size tubing did you use for the main chassis
thank you Bro
Letssss gooooo🔥🔥🔥
@JacobSherwood
2 жыл бұрын
too much fun
@ranger6779
2 жыл бұрын
@gokartgod where you at with the vids man?
@e30maniak
2 жыл бұрын
Hi Bro! Long time non seen
What’s the length/width of the frame
what is the all the sizes
What cc is it
Tengo uno de ellos
V cool cart
Dimensions on frame size tube so I can build one
I'm 6'2 250. Def building one of these (a bit beefier though) and going to rip shitties all day.
What is a good engine
would you sell scrappy?
Promo game strong g
@JacobSherwood
2 жыл бұрын
Appreciate you bro 🤞🏻🥵
That song u was using was really creeping me out jake
cool, but the steering?!
Where did you buy the tires/rims? The cheapest I can find are $250 for a set.
@beaustephenson4888
Жыл бұрын
check out BMI , thats where im getting my stuff at
Are u sell the carts? 😁
🇧🇷🤝🇺🇲 gol kart yes ❤️
I'd pay for the plans if you have anything available like that. I've been wanting to make a kart since I saw the aussies(name is slipping my mind right now) video of their kits.
@BigDaddyLongStockings
Жыл бұрын
Car make revive, they are selling the karts for $2600-3100 with no engine carb or wheels
@2259chevy
Жыл бұрын
They are nice but for that price they can keep it
@BigDaddyLongStockings
Жыл бұрын
@@2259chevy agreed
Yow J... Any measurements
thats the wrong bolt for the samn crank its a fine thread
You should sell these. Complete or roller. I’d buy one. Seriously pm me, I’ll buy a roller chassis. I could have fun in my carport all day.
@theunholycivic
2 жыл бұрын
There are already guys who sell something very similar. KZread: Carmakerevive
@JacobSherwood
2 жыл бұрын
Carmakerevive! Or build one yourself. I have no time for commissions these days. They’re so fun tho!
You need time to drift XD
Hello. I would like to buy such a mini-kart. How much does it cost. Is it possible to send it to Russia? guys from car rivive don't reply to messages hope to cooperate with you.
Hey Jacob Long time watcher, first time commenter😅. Do you know the dimensions, HxWxL?
@JacobSherwood
2 жыл бұрын
The kart is already gone :( I believe 30Lx14Wx16H but I’m not certain
@SomeFlyKid
2 жыл бұрын
@@JacobSherwood Thanks, any tips on how to get the proper caster & camber angles so my front end will sit & perform right?
post a parts list if its $400
@adrianperez7362
3 ай бұрын
It’s not going to be 400 dollars for you unfortunately, the solid axle kit itself is almost $500, and rims and tires are about $300.. perks of having left over parts around.
@straightouttheshed
3 ай бұрын
@@adrianperez7362 it's not a $400 build then. And you didn't post the parts list still
Ay lev in Bilgariya , in Polkovnik Dyakovo🙏❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️❤️
Hay man just wanted to know is it cool if I bild 1for my self brother
Sup
Amenle
hi can u make me sumthing? i have scraps tew
@JacobSherwood
2 жыл бұрын
Lmaoooo
Hey ca
Is it bird?Is it plane?Can it leap tall buildings in a single bound?
Ken yu meyk for mi🙏🙏🙏🙏🙏❤️❤️❤️
I won't one
I’ll give you 350 without the motor for the setup
your akemans/tierods are backwards. no kingpin inclination. excessive scrub steer radius due to no kingpin inclination. excessive bump steer due to excessive scrub steer radius. all adding up to steering that is unpredictable, clunky, and overall just a waste of time. for some reason i cant correlate "scrap" with "pile of neatly notched and bent tubing with out any signs of RUST whatsoever" building from SCRAP involves several weeks of grinding rust off everything, and constantly changing designs and approaches as the suitable piece of scrap for what was planned doesnt exist, and another piece of rusty iron attached differently will do a better job anyway...
Hey brother hoping you could eespond where do you purchase your round tubing from? Hope to hear back
Yeah that steering needs some tweaking
what is the length wide and height of the frame