Thanks for sharing this video. I am going to put a Top Loader into my 64 Ford Galaxie with C6 trans. Need to find a lot of stuff.
@charleschidester67678 жыл бұрын
great mod, those old mechanical clutches were constant headaches.
@johnoflaherty25988 жыл бұрын
I used to have a 1968 Ford Galaxie 500 with a 3-speed manual on the steering column. Strange thing to see on such a large car.
@caseyfuqua26566 жыл бұрын
I bought a clutch pedal assembly for me car the other day. I’m trying to get the automatic assembly out but I’ve hit a snag with some studs that seem to be attached to a steel bracket that is behind the aluminum bracket. Do you have any tips on how to actually get it out. Do I have to pull the dash or what? Thanks
@caseyfuqua26564 жыл бұрын
Did you just drill a hole through the floor for the cable to come through?
@Operator_Error488 жыл бұрын
I'm wanting to do a similar swap into a 69 falcon. Ive got the transmission but I cant find the correct shift linkage for it. Same trans and everything anyone have ideas?
@briantwilson57405 жыл бұрын
how much do you think itd cost to swap the trans on a galixie
@mattwoody1089 Жыл бұрын
Hi what transmission did you use
@kenz75208 жыл бұрын
Awesome swap. How strong are those transmissions?
@zephmont
8 жыл бұрын
+Johnny Dole Not a strong as some other transmissions but can handle a small block fine. Don't put one behind a big block though, my dad had one of these transmissions in his 460 Fairmont and it got chewed up in no time.
@CrazyBritishbitch33
Жыл бұрын
@@zephmontYour "DAD" Daddy, Yeah cause obviously your "Daddy" represents the rest of the fucking world. Idiot.
@jefframsey688 жыл бұрын
What clutch cable did you use?
@zephmont
8 жыл бұрын
it's for a 79-82 Mustang and it adjusts down at the fork. don't use the later self adjusting cables, it wont fit and they suck.
@caseyfuqua26566 жыл бұрын
What did you use for the clutch pedal assembly?
@zephmont
6 жыл бұрын
The pedal assembly is from a 69-70 Galaxie. I just grafted a modern cable on to it instead of using the mechanical linkages.
@caseyfuqua2656
6 жыл бұрын
Zephmont how did you get so lucky to find one for a 69-70 galaxie, aren't they almost impossible to find
@zephmont
6 жыл бұрын
A 70 Galaxie that had a 351w and a 3 in the tree came into the local junkyard around 2003. My dad was the one who salvaged the clutch pedals just to have despite the fact we didn't have one of these cars at the time.
@caseyfuqua2656
4 жыл бұрын
Zephmont did you just route the clutch cable through the floor?
@jfloyd63348 жыл бұрын
where can i find one of them cables ?
@zephmont
8 жыл бұрын
+John Floyd I found mine on ebay. I think the Ford dealer carries them too.
Пікірлер: 23
Thanks for sharing this video. I am going to put a Top Loader into my 64 Ford Galaxie with C6 trans. Need to find a lot of stuff.
great mod, those old mechanical clutches were constant headaches.
I used to have a 1968 Ford Galaxie 500 with a 3-speed manual on the steering column. Strange thing to see on such a large car.
I bought a clutch pedal assembly for me car the other day. I’m trying to get the automatic assembly out but I’ve hit a snag with some studs that seem to be attached to a steel bracket that is behind the aluminum bracket. Do you have any tips on how to actually get it out. Do I have to pull the dash or what? Thanks
Did you just drill a hole through the floor for the cable to come through?
I'm wanting to do a similar swap into a 69 falcon. Ive got the transmission but I cant find the correct shift linkage for it. Same trans and everything anyone have ideas?
how much do you think itd cost to swap the trans on a galixie
Hi what transmission did you use
Awesome swap. How strong are those transmissions?
@zephmont
8 жыл бұрын
+Johnny Dole Not a strong as some other transmissions but can handle a small block fine. Don't put one behind a big block though, my dad had one of these transmissions in his 460 Fairmont and it got chewed up in no time.
@CrazyBritishbitch33
Жыл бұрын
@@zephmontYour "DAD" Daddy, Yeah cause obviously your "Daddy" represents the rest of the fucking world. Idiot.
What clutch cable did you use?
@zephmont
8 жыл бұрын
it's for a 79-82 Mustang and it adjusts down at the fork. don't use the later self adjusting cables, it wont fit and they suck.
What did you use for the clutch pedal assembly?
@zephmont
6 жыл бұрын
The pedal assembly is from a 69-70 Galaxie. I just grafted a modern cable on to it instead of using the mechanical linkages.
@caseyfuqua2656
6 жыл бұрын
Zephmont how did you get so lucky to find one for a 69-70 galaxie, aren't they almost impossible to find
@zephmont
6 жыл бұрын
A 70 Galaxie that had a 351w and a 3 in the tree came into the local junkyard around 2003. My dad was the one who salvaged the clutch pedals just to have despite the fact we didn't have one of these cars at the time.
@caseyfuqua2656
4 жыл бұрын
Zephmont did you just route the clutch cable through the floor?
where can i find one of them cables ?
@zephmont
8 жыл бұрын
+John Floyd I found mine on ebay. I think the Ford dealer carries them too.
You kinda sound like Kermit the frog.
@farerse
3 жыл бұрын
I think it's a Canadian thing..!