I am really glad to see you build this. I have been contemplating and even drawing up ideas for a four seater for two years now. I'll be watching your progress thanks.

@RedBeardsGarage

7 жыл бұрын

+2SlickNick thanks for watching

red beards garage this is so cool I'm watching all of the episodes and building it thanks for advice and how to build

Awesome project RB! Can't wait to see how this one turns out 👍🏽

This project is looking awesome. I knew that sheet was going to be a god set. You made it look so easy. This is definitely going to be my favorite build you guys do and I love that color choice! Great job man keep it up.

Big mud go kart with the v twin

You should build a 6 seater limo cart with dual engines in the rear. You could go all out and put cup holders in the back!

Thank you I am building a go kart and don't know what gauge to use

looking cool

looks really good. I would have made the roll bars last. may be to tall. but can always cut and trim if needed. great job keep up the good work. 4 seater gokart allows the whole family to get involved. 👍

love the build

looking good for the start part 1

What r the measurements

Nice fab! Can't wait to see it come together

@RedBeardsGarage

7 жыл бұрын

Thanks for watching

you need a tri square to use with the levels, also some welding magnets. very handy tools to have.

@RedBeardsGarage

7 жыл бұрын

I actually have both of those. I just didn't feel like I needed them right now.

This project has me hyped

Green and black sounds awesome! Can't wait to see it keep up the awesome content!

@RedBeardsGarage

7 жыл бұрын

Thanks man

looks great

Defiantly gonna watch this

Awesome go-kart and keep up the good work, I wanted to make a go-kart with black paint and red stripes and blue headlights so . Can you tell me the details about the part and inches of the parts of the go-kart

Hey nice go cart

great

cool

my dad and I just cut a go kart in half and added to it to make a 4 seater

Great looking build.... What is the actual wall thickness of the 1" inch square tubing you used to fabricate this Kart...? What was the thickness of sheet metal floor...? Thank you Dave (CT.)

Red beard ur awesome

@RedBeardsGarage

7 жыл бұрын

+Jake Petz no sir your awesome

What’s the music??? Awesome build and gave great ideas man appreciate you brother

Tell sir what r u the measurements or provide a link where we could find them

thanks

Sir 110cc engine how much lifting weight

is this what your putting that v twin on

@RedBeardsGarage

7 жыл бұрын

No that would be way too powerful for the kids. Its going to get a 420 and a torque converter

@keeganhurren9931

7 жыл бұрын

Red Beard's Garage oh ok just wondering because that kart is pretty big and probly gonna be heavy

@muddingcanada6550

7 жыл бұрын

true, mostly with 4 kids, every tho a 5 year old doesn't weight that much but still

@keeganhurren9931

7 жыл бұрын

RedneckRiders ya the reason I said that is because I have an one seater off road gokart and it with 22 in tires in the back and stuff is really heavy

Red beard which did u get the pipe and metal

Nice welding sparks can of gas wouldn't be cool welding and grinding spark gas you get the idea.

@RedBeardsGarage

7 жыл бұрын

+Musicjunkie1933 it's empty

@Musicjunkie1933

7 жыл бұрын

Ever seen empty gas can with fumes still explode makes hell of nice bang some times shoot a nice fire ball or the can pretty hard .....

are you rear mounting the engine behind the rear seat or what? also live axel?

@RedBeardsGarage

7 жыл бұрын

Live axle and it will be mounted on the back of the go kart.

Hola q tal buen proyectó Consulta como podría Aser para optenga los planos de tu proyecto y poder Aser uno igual gracias

Really a nice organized shop high & tight.

I saw your post on Instagram I have been waiting since I saw it

@RedBeardsGarage

7 жыл бұрын

+DJKLawncare _ well man I truly appreciate your support

are going to make blue prints for this so guys like me can build one.? keep up the killer video's and tks gopowersports.com

@RedBeardsGarage

7 жыл бұрын

Yeah Im trying to keep up with all my cuts so I can make a write up on it. Thanks for the support

Think the bottom frame steel dimensions will be too small and not thick enough. There Will be alot of chassis flex. But we Will see. I'll keep watching you guys have some great ideas.

Sorry if I missed it. How thick is the square tube 1/8"? Thanks

@RedBeardsGarage

7 жыл бұрын

I can't remember. I will gauge it tonight and get back with you.

love the build but are you going to use a straight axle or a IRS like if you use and junk utv

@RedBeardsGarage

7 жыл бұрын

Straight axle. There is no point in going that far for just a kids go kart.

@surfrostgaming1193

7 жыл бұрын

+Red Beard's Garage true but I wonder if it's possible you can use go kart parts to build a four wheel drive custom build

@RedBeardsGarage

7 жыл бұрын

Yeah it is. Im probably going to build one in the future on the channel

@surfrostgaming1193

7 жыл бұрын

+Red Beard's Garage yeah I'm looking forward to that

Do you have blueprints for this build i want to build one

@RedBeardsGarage

6 жыл бұрын

No i mostly did it off the top of my head

What powertrain is this beast gonna get?

@RedBeardsGarage

7 жыл бұрын

40 series cvt and a 420 Predator

@cbpowersportsgarage6342

7 жыл бұрын

Red Beard's Garage Awesome can't wait, keep up the good work guys!

Sheesh

Prints measurements materal?

I'm not judging but when you Weld you should have gloves. especially with a wire fed

@RedBeardsGarage

7 жыл бұрын

+Eat My Moto Dust I do sometimes it just depends on how close my hand is to the hot parts. I weld better without gloves to be honest. But thanks for watching out.

redhead. can you make a video showing how to make throttle linkage and adding a return spring for a degoverned 212

@krajus83

7 жыл бұрын

redbeard* stupid autocorrect.

@RedBeardsGarage

7 жыл бұрын

+KramersKlassyKustoms yeah I can. I need to get another stock engine because all mine have been modified already but I will put one up soon.

@RedBeardsGarage

7 жыл бұрын

+KramersKlassyKustoms I just uploaded the video showing you how

@krajus83

7 жыл бұрын

Red Beard's Garage you're the man!

what motor is going on it

@RedBeardsGarage

7 жыл бұрын

+Brandon Perez 420cc

How many inches is the sides and other stuff

Where do you plan to put the engine?

@RedBeardsGarage

7 жыл бұрын

+Austin Stoker making a separate section on the rear the suspension.

@austinstoker9163

7 жыл бұрын

Red Beard's Garage Oh gotcha. Thanks for the reply!

Sorry Red, I'm so behind in watching all my KZread Subscription's , This is going to be a Monster kart when it's finished & I'm liking what you have done so far. I like seeing you have fun in our little hobby. I like your video buddy in these as well & your little comedy skits , It's nice to see it in a video & and I think your channel is going to grow . All the best.....Bob.

@RedBeardsGarage

7 жыл бұрын

+OKIE CHOPPER thanks for the support brother. Always like see you here on the channel. Keep on building

Are you going to run a triangular cross in the floor to strengthen it

@RedBeardsGarage

7 жыл бұрын

Yeah I will strengthen it up some more. Still got a lot to do right now so I will get to it in a later video

@drdatkushboy

7 жыл бұрын

Red Beard's Garage love it, keep up the good work! im building my predator 212 with a CL1 improved racing cam, billet flywheel, jet kit and nitrous kit, its going on a motovox mbx10, it is. a wheelie popping, flamethrowing, beast😂

It's not that long especially for a four seater but an air boat would be cool haha

@RedBeardsGarage

7 жыл бұрын

Lonnie is trying to talk me into building one. Lol

@gokartsminibikesandmore9925

7 жыл бұрын

Oh you so should! Lonnie has got the right idea! Lol

I have a science fair and I need help! Plz if any body knows how many rpm the motor should be if the go cart should carry about 300kg

What engine are you going to use?

@RedBeardsGarage

7 жыл бұрын

+W L 420cc Predator

What size and gauge square tubing are you using?

@RedBeardsGarage

7 жыл бұрын

1/8" thick and 1"x1"

@MrBigTexFyre

7 жыл бұрын

Red Beard's Garage Thanks for the fast response. Helps a lot

what's the name of that music. also what would be the benefits of round tubing over square tubing?

@RedBeardsGarage

7 жыл бұрын

The song is Exclusion- Likewise. There is no different from square to round tubing in my opinion. I just don't have a tube bender so square is a lot easier to work with.

@williamodonnell3839

Жыл бұрын

You da man

What is the width and length?

what are the measurements for this

@RedBeardsGarage

7 жыл бұрын

+Blake Spencer I haven't posted any yet

I want it

What gauge tubing did u use

@RedBeardsGarage

7 жыл бұрын

+Dominic Starkweather I can't remember but I will check tonight

Hey can you give us the build plans please or sell them to me hahah I would love to build one like that

Can you please send out plans.

@RedBeardsGarage

7 жыл бұрын

Ill try there is a lot of cuts i did off the top of my head so i will do my best

How much does that tubing cost ballpark figure and does most metal suppliers have it how is it sold per foot? I see tractor supply sells it like 6-7 foot long for like 19.99 seems like to much money to me going that route..

@RedBeardsGarage

7 жыл бұрын

+Andy Jb I buy mine at whole sale cost. You have to know someone to get it at that price. I can buy it in 20 foot sticks for $20

@ImaMowitall

7 жыл бұрын

Red Beard's Garage Nice you have a good hook up then lol I'll just have to call around see what I can find Thanks for the help.

@RedBeardsGarage

7 жыл бұрын

+Andy Jb try to find a scrap yard that sells it. It might be rusty but will be cheap.

Why you use 1in tubing

@RedBeardsGarage

6 жыл бұрын

For the size engine its super strong and not too heavy

how would I contact you I'm having some issues with a kart I'm trying to fix for my kids I need some advice I've recently got into fixing them up I bought 8 frames and a lot of parts and etc. anyways I just need a Lil guidance thanks in advance

@RedBeardsGarage

7 жыл бұрын

+Lance Northcutt Facebook

awsome i assume v twin?

@RedBeardsGarage

7 жыл бұрын

+logan spencer no 420cc it's for kids

@fastrccarz

7 жыл бұрын

that makes scene v twin is too much for them haha

What gauge steel?

@RedBeardsGarage

6 жыл бұрын

1/8

mini airboat with a 420cc

@RedBeardsGarage

7 жыл бұрын

+logan mclaughlin that's what Lonnie keeps saying lol.

dose circular tubing work?

@RedBeardsGarage

7 жыл бұрын

+Bashier 123 are you asking if you can use circular tubing to build a go kart?

@bashiera5855

7 жыл бұрын

Red Beard's Garage Yes sir

@RedBeardsGarage

7 жыл бұрын

+Bashier 123 yeah. I will be building a go kart out if round tube later in the year. I just need to get a tube notcher and pipe bender.

@bashiera5855

7 жыл бұрын

Thanks for answering my question, hope the kids have fun with that go kart!

@RedBeardsGarage

7 жыл бұрын

+Bashier 123 no problem man anytime.

I seen your Jackie Jones shirt are you in Cleveland Georgia I work at the North Hall Ace Hardware on quillians corner small engine repair

@RedBeardsGarage

6 жыл бұрын

Im in Tennessee. The original Jacky Jones is in Georgia.

Link to RBG merchandise www.pixels2design.com/redbeardsgarage

I'm on FB search Lance Northcutt you don't have too u may be busy

@RedBeardsGarage

7 жыл бұрын

+Lance Northcutt search Red Beards Garage and youll find me

Can you actually build the bars Wow Impressize.

4:20 whatcha smoking??????

Es mas lo q jabla q lo q hace

put the 25hp on it

@RedBeardsGarage

7 жыл бұрын

+Devin Havard it's going on another one. This one is just for kids so it would be a complete waste.

@devinSupernova

7 жыл бұрын

what yall putting it on

@devinSupernova

7 жыл бұрын

Red Beard's Garage omg can't believe you replied I'm a big fan I watch every single video and it'd be really cool if you can shout me out in a video

@RedBeardsGarage

7 жыл бұрын

+Devin Havard yeah man. I'm doing a video soon of a q and a so make sure you comment on the video I post before hand. It will be called ask me your questions

Redbeard, I watch your videos on a regular basis. I recently tuned my son onto your channel he is a regular boy. yet he has a brain injury an can't play any kind of contact sport..but he asked why you didn't have bars above your head on Lil red....so if you get a message from a Lil boy with my last name asking about.."bars" above your head please be kind an somehow explain what Lil red is for. I can't seem to get him to understsnd

@RedBeardsGarage

7 жыл бұрын

+adam schaefer will do man. I'll try to explain it the best I can. Thanks for watching man.

@66crazyfool

7 жыл бұрын

No worries I love what you do its your hobby keep it up i love when y'all go in depth on stuff

@RedBeardsGarage

7 жыл бұрын

+adam schaefer well man we have a lot of video coming out so stay tuned

@66crazyfool

7 жыл бұрын

Oh trust me I will I love the torque converter conversion of lil red I'm curious for more

You should use gloves more when welding my grand father got cancer from not using gloves :(

@RedBeardsGarage

6 жыл бұрын

I know I do. Its hard to get out of a habit