4 Primer Scratch Test- STIX Primer - Zinsser Bulls eye - Ben Moore Enamel Underbody - Zinsser BIN
Тәжірибелік нұсқаулар және стиль
4 Primer Scratch Test- STIX Primer - Zinsser Bulls eye - Ben Moore Enamel Underbody - Zinsser BIN
Purchase My recommended Tools, Brushes, Paints, and Primer's Here: www.amazon.com/shop/russolina...
www.russolinatzpainting.com
#cabinets #Scratchtest #primers
In this Cabinet Painting video, I show you how well 4 different Primers adhere to a piece of wood laminate that I sanded and De Glossed. I then do a primer scratch test using Duck Tape and Frost Tape. The primer I am using are STIX Bonding Primer, Zinsser Bulls Eye 123, Benjamin Moore Oil Enamel Underbody, and Zinsser BIN Shellac Primer.
Visit My Amazon Storefront to Purchase Materials and Tools (rollers, brushes)used in this Video Series.
a.co/e3ynrdS
Like me on Facebook! / russolinatzpaintingllc
My Website! www.russolinatzpainting.com
The Russ Olinatz Painting Show offers you How to tips and demonstrations for Interior House Painting and Exterior Painting I will show you Interior painting tips for dealing with Wallpaper Removal, Sheetrock Repairs, Skim Coating Tips and Techniques , Door Repair with Car Bondo, Deck Maintenance, Deck Sanding, Pressure Washing, Power Washing, Wood Staining, Mold Removal/Killing, Cabinet Painting, Caulking Tips, Smooth out textured Walls, Painting over Varnished Trim, Sheetrock Taping, Prepare and Paint New Crown Molding, How to Strain 5 Gallon paint, , Ceiling Repair, Popcorn Ceiling Removal, Paint over Wallpaper, Chalkboard Paint, How to Mix Joint Compound. Home Improvement. 3m, citristrip, MinWax gel stain, Paint Door Quickly, Paint Door Fast, Prime Pre-Primed 6 Panel Bifold Door, Benjamin Moore, Sherwin Williams, Zinsser, Sherwin Williams Emerald Urethane trim enamel, Benjamin Moore Fresh Start Primer, Trimaco X-Board, Benjamin Moore Advance, Benjamin Moore Aura, Zinsser BIN
Пікірлер: 171
Thank you for taking the time to make this video. Very helpful Saving alot of people money! I appreciate you!
@RussOlinatzPaintShow
Жыл бұрын
Thank you!
Really great video, thank you. Perfect test, you've really helped me narrow down a primer for my laminate job I need to use. Storing heavy musical equipment in my shelves. Going with the BIN.
@RussOlinatzPaintShow
2 жыл бұрын
Hi Craig The ZInsser BIN Adheres Awesome and Dries fast! Do 2 Coats and Tint BIN to desired Top Coat. What are you going to Top Coat with? Russ
Great demonstration. Thanks , Russ.
@RussOlinatzPaintShow
2 жыл бұрын
Thank you!
Nice one Russ , BIN is a great multi-purpose primer. I always makes sure i have some on my van.(truck)
@RussOlinatzPaintShow
2 жыл бұрын
Yes Thank you!
STIX primer is my go to….it has always served me well over the years….
@RussOlinatzPaintShow
2 жыл бұрын
Yes it’s a great water based bonding primer!
Wow great demonstration thanks buddy
@RussOlinatzPaintShow
Жыл бұрын
Thanks Marco!
Very helpful video and comments, thanks!
@RussOlinatzPaintShow
Жыл бұрын
Hi Jeff Thank you! I’m currently putting together more primer Tests. Stay tuned for more videos! Russ
Props for the content!
@RussOlinatzPaintShow
9 ай бұрын
Thank you!
Awesome test
@RussOlinatzPaintShow
2 жыл бұрын
Thanks!
Great revue!
@RussOlinatzPaintShow
2 жыл бұрын
Thanks Charlie!
Awesome video. Would like to see more comparisons including some others have mentioned. God bless.
@RussOlinatzPaintShow
11 ай бұрын
Ok great!
Great video. BIN is my go to primer for stains and when I want the best adhesion. I also find clean up is easy with ammonia and water.
@RussOlinatzPaintShow
2 жыл бұрын
Hi Mike Thank you! Yes it’s awesome for adhesion and dries fast. I also clean up with Ammonia, but sometimes have a issue with the smell. Have you tried using Denatured Alcohol? Russ
@gageirwin7206
Жыл бұрын
Denatured alcohol works good since it is an alcoholic base primer , paint thinner for oil base , mineral spirts on my machines
@RussOlinatzPaintShow
Жыл бұрын
Yes it works great! What kind of machines?
@allencolvin4320
Жыл бұрын
Which one would be best on oak cabinets?
@RussOlinatzPaintShow
Жыл бұрын
I like to use BIN cause it dries fast and adheres to the varnish with no sanding needed. I oh course De gloss first. The BIN also is very thin, so it won’t leave a heavy nap if you work fast with the 1/4 inch nap microfiber roller
Great video
@RussOlinatzPaintShow
Жыл бұрын
Thanks!
Thx dude ! I was on the fence and you cleared my mind for me.
@RussOlinatzPaintShow
Жыл бұрын
Awesome! Good Luck!
I've done this exact test and yes the conclusion is the same. Still the bin is superior because of easy cleanup and also the leveling and sandability for a great finished product.
@RussOlinatzPaintShow
Жыл бұрын
Hello Ian Thanks for sharing your experience! Yes, I love the BIN! Why do you say that it’s Easy Clean up? Russ
@ianandrews8773
Жыл бұрын
@@RussOlinatzPaintShow well for finish coats I normally use an acrylic urethane or enamel but with methylhydrate the easiest thing to clean is the BIN. Oil primer cleanups are definitely difficult to do if you're trying to get the same results
@RussOlinatzPaintShow
Жыл бұрын
Yes I top coat the same! What roller do you use?
Thanks Mate!
@RussOlinatzPaintShow
2 ай бұрын
👍
It might be interesting to see an additional test: How would the results compare if you put a topcoat of Advance on top of the BIN and the Fresh Start - and a topcoat of Emerald Urethane on top of another section that was also primed with BIN and Fresh Start. Anyway, thanks for a terrific video Russ!!
@RussOlinatzPaintShow
Жыл бұрын
Thanks Leroy! I will make u that video!
@Avital4414
Жыл бұрын
@@RussOlinatzPaintShow great!!
@RussOlinatzPaintShow
Жыл бұрын
How u making out on cabinets?
Thanks, I'm painting some old kitchen cabinets this week and will be using BIN primer followed by a couple of coats of acrylic eggshell!
@RussOlinatzPaintShow
9 ай бұрын
Nice! Are you going to spray or Roll?
@Nickpaintbrush
9 ай бұрын
@@RussOlinatzPaintShow I'll be rolling them with a foam roller
@RussOlinatzPaintShow
9 ай бұрын
Have u tried the 1/4 inch microfiber?
@Nickpaintbrush
9 ай бұрын
@@RussOlinatzPaintShow I have tried similar
@RussOlinatzPaintShow
9 ай бұрын
@Nickpaintbrush what brand?
My experience has been if the bare wood is a particle board type, which is common under cheap paneling like you sanded, that water based primers cause that particle board wood to swell up and crate bumps. That does not occur as much with oil based primers. Either way, if bumps appear after the wood has been primed, more sanding is required and then a second coat of primer must be added.
@RussOlinatzPaintShow
2 жыл бұрын
Hi Chris Yes, good point! What primer do u like to use? Russ
@keyboardtek
2 жыл бұрын
@@RussOlinatzPaintShow I just did a test of three primers on a scrap piece of shiny old wood paneling: Sherwin Williams Extreme Block, INSL-X Primall, and Kilz 2 All Purpose. Waiting 24 hours to cure, the fingernail scratch test failed to remove any primer. The dull screwdriver scratch test put a line mark but did not remove any of those primers. The sharp edge of a chisel started to remove the primer. This paneling is a laminate which I sanded with 220 grit and it had some spots down to bare wood. None of the bare wood spots swelled up. I would not hesitate to use any of these on my paneling repainting project on my next house I am moving to.
@RussOlinatzPaintShow
2 жыл бұрын
Hi Chris Thanks for doing that test! All 3 of those primers are great! Have you tested out the Zinsser Smart Primer?
Great vid!
@RussOlinatzPaintShow
2 жыл бұрын
Thank you Ben!
@frankmc324
2 жыл бұрын
@@RussOlinatzPaintShow russ what primer would you recommend for wall shower tile
@RussOlinatzPaintShow
2 жыл бұрын
Hi Frank Are you painting over tile in a shower? Russ
@frankmc324
2 жыл бұрын
@@RussOlinatzPaintShow yes
@RussOlinatzPaintShow
2 жыл бұрын
Hi Frank Just so you know It’s not practical to paint tile on all bathroom surfaces. But your paint job will last the longest on tiled bathroom surfaces that receive low to moderate exposure to moisture-think bathroom floors. Your best bet is to use an epoxy or urethane primers. Have you researched this? Russ
How would you compare these to both the extreme bonding primer from sherwin and UMA by XIM?
@RussOlinatzPaintShow
2 жыл бұрын
Hi Chris The Sherwin Williams Extreme Bonding Primer is also a great bonding primer provided you do your prep work. I haven’t tried the UMA by XIM. Russ
I was wondering, the zinsser primer, the can says white but the paint looks like a soft cream color. I need that color, but what is that called?
@RussOlinatzPaintShow
Жыл бұрын
Hi Michelle I don’t know but it has yellow in it. Just ask the paint store to scan the bin color. Do you have a can of the bin primer? Russ
What do you recommend for painted cedar siding that has persitent peeling and cracking on the knots?
@RussOlinatzPaintShow
7 ай бұрын
Zinsser Peel Stop Triple thick primer!
@bob57786
7 ай бұрын
@@RussOlinatzPaintShow Thank you sir!
Russ, I'm thinking that simple water cleanup is my number one priority and I am not even considering running a fork over my work. I'm going with the Zinsser Bullseye this time.
@RussOlinatzPaintShow
2 жыл бұрын
Hi Simple water clean up is a blessing! Russ
@tribulationprepper787
2 жыл бұрын
@@RussOlinatzPaintShow As the folks over at Western Airlines use to say... "It's the only way to fly".
@RussOlinatzPaintShow
2 жыл бұрын
Lol! Have you ever worked with Zinsser BIN?
@tribulationprepper787
2 жыл бұрын
@@RussOlinatzPaintShow Nope. I have a quart of 123 and have gone through a gallon and a half of Gards for sizing walls before wallpapering. My next Zinsser purchase will be the Triple Thick exterior primer before I paint the garage door, the front door, some shutters and various other trim with Some Valspar Duramax I bought at Lowe's.
@RussOlinatzPaintShow
2 жыл бұрын
Hi Ok great! Let me know after you work with the Zinsser Peel Stop Triple Thick Binding Primer? Aren’t you supposed to use Zinsser Shieldz for the wall covering primer Sealer? Russ
As a guess, which one would be best on gloss oil based paint with no sanding?
@RussOlinatzPaintShow
2 ай бұрын
Zinsser BIN!
Tinted primer dosn't bond as well as untinted, its usually best to keep primer untinted even if it means having to do a little extra work.
@RussOlinatzPaintShow
2 жыл бұрын
Hi Thanks for sharing your opinion! Have you had any trouble with bonding using a tinted primer? Russ
@bananas1318
2 жыл бұрын
@@RussOlinatzPaintShow personally no, because I never use tinted primer on bare wood or cabinets. Tinting a primer gray for red paint I have done, because ot makes the red look better and hides well, but when you want the sticky adhesive bonding properly of a good primer for cabinets or wood or metal's it's best to avoid because tinting changes the property of the primer. It's not so much an opinion, I've been painting for 14 years, it's just what ever paint store recommends as well as doing a quick Google search and checking out painter forums.
@RussOlinatzPaintShow
2 жыл бұрын
Hi Thanks for sharing your opinion. Some primers are not meant to be tinted, but A lot are. Many Primers say right on the Can that it can be Tinted using up to so many ounces of universal colorant per gallon. Many Bright and Deep colors require a tinted primer! I think many people who mix paint are not knowledgeable of what tint to use or that they may screw it up, so they say that you shouldn’t tint the primer because it will effect the adhesion. Have you had this happen to you?
Who has 2 days to wait for primer to dry. I’ve found that BIN will bond to anything and dries fast and ssnd easy
@RussOlinatzPaintShow
Жыл бұрын
Hi Gary- Yes, your right! BIN is the Best! Have you tried the Synthetic BIN? Russ
Hello, I’m thinking of painting my cabinets that are from the 80s. They’re a wood grain, but not solid wood, I don’t know exactly what they’re called. Do you think the bin would be a good choice for cabinets? And recommendations for a topcoat?
@RussOlinatzPaintShow
Жыл бұрын
Hi John Yes Bin is the best choice especially if your trying to bond to Varnish or Polyurethane. Are your cabinets varnished? Russ
@RussOlinatzPaintShow
Жыл бұрын
I can’t see your recent comment
@johnv7215
Жыл бұрын
@@RussOlinatzPaintShow Sorry, I can’t see it either now. Thanks for the reply. I don’t think it’s a varnish. It’s kind of the same texture that older wood grain hollow core doors are made of, but on a cabinet door. Would cleaning with TSP be good enough? Also what would you recommend for a topcoat for cabinets. Electrician here, painting is something I know very little about and any advice is much appreciated.
@RussOlinatzPaintShow
Жыл бұрын
Hi John Yes TSP will work. I use a liquid Deglosser. I would use Sherwin Williams Emerald Trim and urethane paint. Another paint is Benjamin Moore Advance. Both level out Nicely! Where u from? Russ
@johnv7215
Жыл бұрын
@@RussOlinatzPaintShow Thank you I’ll check them both out and get a Deglosser. Everything that I’ve been reading is that it’s a huge pain to paint that type of cabinet but I’ll give it a shot. I’m in NorCal.
Been watching your vids over the past year. About to roll some bin on some cabinets and in between using foam roller or microfiber like you use. Any reasons to not use foam? Have a good day
@RussOlinatzPaintShow
Жыл бұрын
Hi I have used both. The advantage of using the microfiber 1/4 inch nap is you are able to get into the crevices and corner easier. Russ
@brianlangsfeld1756
Жыл бұрын
@@RussOlinatzPaintShow sold. How do stop the paint from building up when pushing the tip of roller into the corners or designs
@brianlangsfeld1756
Жыл бұрын
Thinking about using that whizzflock
@RussOlinatzPaintShow
Жыл бұрын
After I roll the primer on to transfer from my paint pail, I use a 1.5 inch brush in the corners or recessed areas to spread out evenly, then take away brush strokes with roller again!
@RussOlinatzPaintShow
Жыл бұрын
Try them both and see which one you like better!
Can I use BIN on tike floor?
@RussOlinatzPaintShow
Жыл бұрын
What floor?
@sparky9044
Жыл бұрын
@@RussOlinatzPaintShow tile porcelain
@RussOlinatzPaintShow
Жыл бұрын
No it’s not recommended!
I like your videos and like real experiments like this. But, bulls eye 123 takes 7 days to fully adhere, you only gave it 2. Since you like to know; I'm in Toronto.
@RussOlinatzPaintShow
Жыл бұрын
Hi Tony Yes full adhesion is 7 days and must be too coated with in 30 days. That’s not sanding and Deglossing like I did. What your preferred primer over varnish or polyurethane?
@tonyc7352
Жыл бұрын
@@RussOlinatzPaintShow Hi Russ, I never used it, but I think B-I-N would be best. But since it's more expensive I would just sand and use Zinsser Cover Stain. I like how it sands out. Sanding/de-glossing or not, BE 1-2-3 requires 7 days to fully adhere, that is especially important in an experiment.
@RussOlinatzPaintShow
Жыл бұрын
Hi Yes thanks for sharing that! My concern was with the Zinsser BIN. It must be top Coated with in 3 days so I gave it 2 days to cure. In a perfect world I should of waited 7 days to top coat the Bulls Eye 123. What I like about the Bin is that it’s really thin and you can apply 2 coats in same day and then top coat!
@tonyc7352
Жыл бұрын
@@RussOlinatzPaintShow I don't see anything in Zinsser's technical data sheet about requiring top coat within 3 days. Actually it says it takes 1-3 days to to fully cure. Yes, it's super fast drying and can even recoat in 45 min!
@RussOlinatzPaintShow
Жыл бұрын
Home Depot sells this and they recommend this. To ensure full durability with Rust-Oleum Zinsser B-I-N Shellac-Based Primer, we do recommend applying a topcoat within 3 days of application.
Is there pink primer?
@RussOlinatzPaintShow
2 жыл бұрын
Yes if you tint it towards your top Coat!
@osycastanon2980
2 жыл бұрын
@@RussOlinatzPaintShow I bought a 5gal primer bucket from lowes and it was pink color
@RussOlinatzPaintShow
2 жыл бұрын
What brand?
@osycastanon2980
2 жыл бұрын
Bulls eye, I was hoping it was going to turn white or gray after drying but no it stayed pink
@RussOlinatzPaintShow
2 жыл бұрын
Wow! So u purchased a tinted primer?
This music gives the weirdest feeling. I feel like someone got drowned in the worst primer on this test. 😅
@RussOlinatzPaintShow
2 жыл бұрын
Thanks for sharing that! Russ
To be fair, stixx is only guaranteed in stock, un-tinted form.
@RussOlinatzPaintShow
7 ай бұрын
Can be tinted with up to 2 fl. oz. of Benjamin Moore® Gennex® colorants or Universal colorants per gallon.
@ryane6719
7 ай бұрын
@@RussOlinatzPaintShow many Benjamin Moore distributors won’t tint it anymore, colorant degrades the adhesion. There’s no reason to be tinting it, it’s an adhesion primer.
@RussOlinatzPaintShow
7 ай бұрын
@@ryane6719 How do you know many Benjamin Moore Distributors won't Tint it anymore? It says right on the can that its Tintable.
You put a thicker layer of Benjamin Moore
@RussOlinatzPaintShow
9 ай бұрын
I thought I rolled it out even like the other 3 paints!
To be fair, you didn’t sand very well and here you used the stix primer
@RussOlinatzPaintShow
2 жыл бұрын
Hi Juan Thanks for your comment! I sanded and used a Liquid Sander to promote adhesion! I used 4 primers, and they all did a great job! Don’t u think? Russ
@Juan-zd1ct
2 жыл бұрын
Sorry, that was type-o. What I meant to say is you didn’t mechanically sand well on the spot where you painted with the stix. Look over the video yourself and you will see.
@RussOlinatzPaintShow
2 жыл бұрын
Yes I just used a sander to create a mechanical bond before using a liquid sander to dull, clean, and soften the surface. They all performed great! Russ
@Randy-br3kf
Ай бұрын
@RussOlinatzPaintShow oh!! I see his point. You did not hit the top 3 inches of your sample board with the palm sander, except for one quick swipe towards the end. P😊 That said, the 123 is hot garbage as far as primer goes. I would say the same for any waterborn primer. The BIN gets great reviews. I use CoverStain. The Ben Moore Underbody is great but takes to long to dry.
@RussOlinatzPaintShow
Ай бұрын
Yes thank you for sharing that. I also like cover stain, but they recently changed their formula. Have u tried the new stuff?
this was painful to watch
@RussOlinatzPaintShow
Жыл бұрын
Please Explain?
Thanks.
@RussOlinatzPaintShow
10 ай бұрын
Thanks!