Best dam video out there !! Your recording style and editing is perfect. Thank you

Great job. Love the fact that you didn't bullshit about everything that didn't matter. You got the job done. Thanks for the video. Waiting on part two.

hey man good video bryan. gonna tackle a 4.7 tommorow.. thanxz 4 all da helpful hints an ur mechanic knowledge.. thank u

Seen a lot of videos on how to remove a 4.7 but none explain step by step I like how you do is the best video here

Great how to bro. Everything was on point. I am now a subscriber!!

Hi Brian my name is Steve from Boston an I just want to say I looked one day an you were gone of You Tube .Today I just watch your videos why you closed an can't believe it..I hear you when it come to state stuff I was in business for 25 yrs..I want to thank you you helped me so much on my 4.7 build..hope to keep seeing content from you your Best Mechanic I be ever seen..hang in there man

Nice work man, your like a surgeon, with great explanation.

Excellent video. Great detail. Thank You.

Dude.. thanks for the video. When you coming to help me pull this 4.7 out of my 07 Durango.. I have a bad back so going to take my sweet time.. might take me a week to get it out.

Nice job!

I almost cried watching those collector bolts come out. I have never in my life seen that before. Always need a torch , cut off wheel, drill, cry…. Where do you live? Heaven? Lol

@Bryan916

2 жыл бұрын

California

@g37fy68

3 ай бұрын

@@Bryan916we got it good here fuck rust

Excelente tu trabajo amigo y muy limpio. Felicitaciones

You can tell this guys a savage tech bro gets down

4x4 is about an extra 3hrs. Nasty engine mount bracket

we just did the engine swap, we were wondering if you could possibly tell us what we need to do to make the fly by wire work??? or what part we would need to make it work?

Hey I’m 18 with 2002 Dodge Ram 4.7 2wd and I took my motor out with a help of my brother and I’m gonna be attempting to put back another 4.7 in is there any tips on what I need I know the basics but do you have any advice like on how to put the fluids back in or anything?

Just bought a 2003 need motor sound like it was timing chain but I need to know what 4.7 engines can I put in it if I can’t find the 2003 1500 motor

good work

Thanks

hey bryan just tacked the engine swap in the dodge ram 4.7. piece of cake. other engine fired right up.. thank u

@Bryan916

4 жыл бұрын

Happy to hear my video helped out!

You do good work man I pulled my 4.7 out just like you did it.. but without the power tools and put another one in and brother let me tell you the one I took out had coolant and metal flakes in it..I'm not a certified mechanic just a shade tree I just learn from guys like you that do this in their sleep but in all you do excellent work man👍🏾👍🏾👍🏾👍🏾

Wow good work bro! Can't wait until i see part 2😎

Do this apply to 2002 Dakota as well with the 4.7 engine

How can you tell if you need a engine with or without a carrier mounting Lh rear cylinder block? I’m trying to replace my engine in my 04 Durango 4x4

LOL 210,000 miles on the original 4.7l Powertech that came with the 02 bango. The errors were so EASY to avoid they always tell you way before any damage is done.

@NXT_LVL

Жыл бұрын

Yeah, wonder the % of the times he sighed over "another 4.7" that was a full size Rams and not in the lighter Dakotas/Durangos which were like 3/8 ton trucks like the S10/Blazer and Ranger which had V6s. The ram is easily 500lbs heavier for the regular cab alone and I know my QC Dakota is around 4800, which was as heavy as they came for the 97-04 gen. Thats why Dodge made the 4,7 dual spark plug per cylinder, like the hemis and bumped to power/tq figures to handle the heavier redesign in 05.

@tylerrobertson9729

Жыл бұрын

When I departed with mine it was 247,000 miles and the only problem it had was the rear axle I BENT offroading like a boss (Mine came with the composite skid pans in the undercarriage) I miss it I really do.

And what I mean by any tips is like any special tools or anything

will a gen III 5.7 hemi fit in a gen IV truck

A little help ! Your vids helping me so far. 07 Grand Cherokee 4x4 Laredo 4.7 - Flex fuel. Parts issue replacing oil pump and timing chain. Getting two stories ? Parts fitment for a 285ci, and a 287ci - being told there is and there is not a differences ?

@Bryan916

4 жыл бұрын

www.wjjeeps.com/engine.htm

@smkdude26

4 жыл бұрын

@@Bryan916 Thanks for the link. info. there was not 100%. Parts match up and spec. out of date for my year. I'll keep searching. Thank U again for helping. Stay Safe.

@Bryan916

4 жыл бұрын

@@smkdude26 From my years of experience working on the 4.7 I'm 100% sure all 4.7 in North America are 287s so it's safe to buy 4.7 parts listed with with an engine displacement of 287ci

what's the big red wire connected 2 in the back I have the same truck but it has electrical issues finding a honest mechanic that's not gonna tell you it needs a engine swap besides cut and miss soldered wires...

Have you had any problems with them not cranking after shaping them? Both vin N, I drove one in and replaced it with one that was locked down! All the grounds are bolted in place

@Bryan916

4 жыл бұрын

No never had one not start on me. Have You check the cam and crank sensor!

Hey I have a question if anyone knows or can answer .I have a 2006 dodge charger rt 5.7l hemi engine, the motor mounts are not the same to fit my dodge ram, is there mounts that will fit to a 2002 dodge ram 1500? Thanks

How groudss do the 4.7 engine have I swap my engine and can't get it to start

What was wrong with the engine when it came in? No start? Bad knock or rattle? I have an 05 Ram 4.7 that I have been adding a little hp to from time to time. Love your videos!

@Bryan916

6 жыл бұрын

Click the link then skip the video ahead to 16:55. I tried to start it and it was pretty obvious the motor was trashed. kzread.info/dash/bejne/p36myLChdbzdgaw.html

@craigheidelberger3325

6 жыл бұрын

O..... Enough said!

How long did it take you to pull it out ?

My torque converter cover has 6 bolts. They are unruly. How do I get them off?

Quick question. Can you swap a 02 1500 4.7 4x4 and put a 04 1500 4.7 ?

did you have to support the transmission ?

Hey I have an 02 Ram 4.7. Can I swap to a 5.7 using same transmission?

I swapped mine and the 02 sensors refuse to work, Even the new ones and they have power so it won't pass inspection

Helo Brayn how long time it takes you to do all this work? I like your video because you explain and show averting, thank you for all this information 👍

@Bryan916

4 жыл бұрын

about 3 hours to get the engine out!

@jacobjarvis2545

10 ай бұрын

​@Bryan916 where did you bolt up the chain off the front of the block and where in the rear

@daman737

7 ай бұрын

​@@jacobjarvis2545 im wondering the same thing ??

@jacobjarvis2545

7 ай бұрын

@daman737 you can either use a strap and go from the exhaust manifolds or pull the intake and bolt the chain to the back of the head and front acc drive. Just watch the valve covers bc they can be weak and brittle if you go from the exhaust manifolds and you will have to wiggle and jiggle the engine back and forth and will be high on 1 side if you chain it front to back. It's what I had to do

theres 2 bolt holes in the valley, between the heads, is that where u bolted one of the chain hook ups?

@Bryan916

2 жыл бұрын

Yes

Can I put n 5.2 n a dodge ram pu wit n 4.7

Was that the air filter! Nah, couldn't be.

@Bryan916

6 жыл бұрын

No Kidding!

Can I swap my 4.7 to a 5.7 hemi on my ram ?

Where are you located how long did this take you ?

I have a 2006 Dodge Ram 4.7 and is it possible for me to place a 5.7 hemi motor to the ram ??

@cedrickjones9928

4 жыл бұрын

Is it possible to go from a 5.7 to 4.7

is it possible to replace the 4.7L in a 2000 dakota with a 4.7L from a 2002 Ram 1500. Both are 4 door and 4x4

@Bryan916

5 жыл бұрын

Yes swap over the flywheel an exhaust manifold and it should be fine.

@JimHallock

5 жыл бұрын

@@Bryan916 is the tranny not the same? Do I have to use the one in the dakota?

How much did you pay for it?

Do you know if the 02 ram 1500 4.7 all the engine from 02 rams are the same?

@Bryan916

5 жыл бұрын

I don't think so some are 4.7 some are 5.7

Where is your shop located at?

Man I've been looking for a video like this for days. I have a 2009 1500 with a seized 4.7. It looks easy to change. My question is can I just swap a 5.7 in it from the same year? I just need the wiring harness? I dont want to out another 4.7 in it..

@ray8380

5 жыл бұрын

Were you able to get that information?

How long did the swap take, or just to remove the 4.7. I wont be going back with a 4.7 eventhough it was a good engine that ran 200000 miles without any problems. I'm going back with a 6.1 srt8 hemi and tranny. Thanks Sid

@Bryan916

4 жыл бұрын

like 3 hours to remove it.

@cory0702

4 жыл бұрын

Thanks

@357RedG

4 жыл бұрын

That's my plan, 4.7 is at 147k now but I'm ready for a change

@cory0702

4 жыл бұрын

@@357RedG you'll like the change, especially if you go with a hemi

I'm pulling my 4.7l out of my 2004 dakota next week. Putting a Powertrain Products reman in it. Does the transmission drop at all after pulling the motor?

Can you please tell me if a Dodge Dakota truck needs to be sitting on a flat surface to install the motor properly I'm having trouble because my - Dakota is sitting on a incline in my driveway so I don't know if that's the cause for the trouble The problem is I can't get the mountain amounts to align and engine and transmission to mate properly please let me know what I need to do

@Artlopez105

2 жыл бұрын

I mean motor mounts

@Bryan916

2 жыл бұрын

Sitting on a flat surface would help make the job a little easier but it wouldn't prevent you from installing your motor. Make sure you have the correct mounts. beware of cheap mounts that don't work as well. Also try loosening up the transmission mounts to help the engine and trans come together.

@Artlopez105

2 жыл бұрын

@@Bryan916 ok thank you for the tips I will set it on a flat surface and double check the mounts i did get them from a Amazon vendor

@Artlopez105

2 жыл бұрын

I paid 35.00 a peice.

Does anyone know if a newer 4.7 will work for an older ram (03 swapping with a 06+)

@mrpistonrecaro6483

Жыл бұрын

Only 02-03

If I swap my 05 ram 4.7 to a 07 ram 5.7, what else would I need to change besides the ECM and wiring?

@jesiahquincy8384

3 жыл бұрын

A trick : you can watch movies on Flixzone. Me and my gf have been using it for watching loads of movies during the lockdown.

@abelcasey9416

3 жыл бұрын

@Jesiah Quincy Yea, I've been using Flixzone} for since november myself :)

Can i swap a 4.7 w egr with a 4.7 w/o egr

@Bryan916

2 жыл бұрын

It will set a check light if the ECM does not see EGR input. You would have to have the ECM reprogram without EGR!

The ground strap at 22:40 connects to both heads right?? What size bolts are they that go there

@Bryan916

6 жыл бұрын

Orlando Corona Can't remember maybe 13mm

@orlandocorona1064

6 жыл бұрын

So I did and engine swap on my 2007 jeep grand Cherokee in getting it to crank but doesn't fully turn over not sure if its electrical issue with my grounds I hear my fuel pump turning on any suggestions?

@Bryan916

6 жыл бұрын

Orlando Corona you gotta check for fuel, spark and compression. See which ingredient is missing and then take it from there.

@orlandocorona1064

6 жыл бұрын

Ok so I check all of that I got everything but spark I've checked my realys fuses everything I could think of crankshaft positioning sensor cam sensor I'm getting a p0335 code I'm stuck ... the ground behind the heads what does it ground? Advise would be greatly appreciated

@Bryan916

6 жыл бұрын

Orlando Corona Replace the crankshaft position sensor which is likely the problem, but it could be a wiring issue also. so check Supply voltage, ground, and sensor signal.

I got a 2002 4.7 4x4 140,000 miles prayin I get too 240,000 anything I can do for my truck to keep it running clean and good other than doing the oil change every 3,000 miles???

@Bryan916

5 жыл бұрын

Keep it nice and cool, never allow the temp to pass 210!

@Kgio-2112

5 жыл бұрын

Add head gasket sealer now!

@Drjoefixitguy08

5 жыл бұрын

My 4.7 has 300k and hasn’t skipped a beat lol!!

@elonsus9747

4 жыл бұрын

My friend has an 08 Durango with 4.7. The engine blew a head gasket. We changed his oil because there was coolant in it and bought some cheap head gasket sealer and put it in there. No more smoking. He has about 170k on it.

I mean motor mounts

how much would you charge me to do this swap?? i want to save money to do this i got an 02 ram

@erickmorales6381

3 жыл бұрын

also bc i think i have a lifter that failed

@ChrisB-cx6td

3 жыл бұрын

@@erickmorales6381 change the lifters , had lifters fail on me

Can I bring my truck to you

No one wants to tackle the 4wd 4.7 swap

Lol my friend just bought a Durango with a 4.7

@Bryan916

6 жыл бұрын

It's a good motor till you heat it up, or reach high mileage then it pretty much self-destructs

@moneymac2864

6 жыл бұрын

Bryan916 yeah i told him not to buy the piece of junk but he didn't listen...and it already needs brakes, heater core and a new a/c compressor...then of course a new engine and a set of remanned heads in the near future...