Best mod I ever did on my 2002 GT. Original owner and still driving it

@nothanks1627

Ай бұрын

Thats awesome. I just bought my first one. 01 Bullitt in DHG #3776 its cherry❤

That bucking! That was hilarious 🤣 I know exactly what your talking about.

@carsandhobbies

Жыл бұрын

Yeah it's the worst lol

I was gonna go with 4.10s but found a great deal on a built rear with 3.73 gears. I have a 97gt and the new edge rear is 1/2 wider on both sides which is what i was looking for. I drove 4hrs one way and picked it up. Liking the content.just subscribed. My channel is based on my 97gt so i see a lot of your content being relatable.

@carsandhobbies

2 жыл бұрын

Nice I think I might get 3.73's for my 02. I subscribed to your channel too!

The Stang sounds wonderful.

Love your vids best explained about gears rpms traction everything thank you so much for doing this video

@carsandhobbies

2 жыл бұрын

Glad you enjoyed it!

I appreciate this video so much, you answered pretty much all my questions in the video

@carsandhobbies

Жыл бұрын

Awesome glad it was helpful!

Great video as always!! Car sounding good!

@carsandhobbies

2 жыл бұрын

Thanks man!

Love the car man. I have 4.10s in an 01 kenne bell 5 speed and I love it

Awesome video! Do more like these they’re top notch🔥

@carsandhobbies

Жыл бұрын

Thanks!

these are really good quality videos I feel like you need more subs man keep up the good work

@carsandhobbies

Жыл бұрын

Thanks man! More to come!

love how the car sounds when you downshift and the engine cruises at high rpms.

I did enjoy the video and thanks for the ride ,hope to seeore soon ty

@carsandhobbies

2 жыл бұрын

Glad you enjoyed it!

Dope video Brodie 💪🏾💪🏾🔥🔥💯💯

It sounds great 👍.

@carsandhobbies

2 жыл бұрын

Thank You!

That sucker sounds good ! 4.10s aren’t too bad on the highway but you’re right about cruising around 75-80 it’s humming just under 3k with 26” tires.

@carsandhobbies

Жыл бұрын

Yeah wish it was a 6 speed

When I swapped 3.27-3.73 in a 02 GT 5 speed I used to have it didn't really hurt the gas mileage that much if any. I'm considering 4.10's for my 04 Mach 1.

Nice run and good driving skill

@carsandhobbies

Жыл бұрын

Thanks!

I had 410s. I like 456. Fun times off line 456 are sweeet

So cool man!😎

@carsandhobbies

2 жыл бұрын

Thanks!

That bucking you were talking about probably came from your old gears being worn and having slack and the new gears are tight with no slack, makes a big difference, new gears always feels better, car sounds good

@carsandhobbies

Жыл бұрын

That's a good point didn't think about that!

@Json.-

Жыл бұрын

@@carsandhobbies 👊🏼

How awesome. Those gears will turn the car into a true race car.

@carsandhobbies

Жыл бұрын

Lol you're right!

Good choice for a 2V. I have 4.56 gears on my 01 cobra. The 4V need to rev even more. Never fear the gears. If you ever have to tame a gear you run a taller tire.

@carsandhobbies

2 жыл бұрын

I bet 4.56's are a monster in a 4v

@riceetr1260

2 жыл бұрын

@@carsandhobbies perfect in my opinion as long as you stay NA

Nice

I subscribed bro, I support the 2v Brothers n sisters, not leaving my 2v..

@carsandhobbies

2 жыл бұрын

Preciate the support man!

@P71ScrewHead

2 жыл бұрын

@@carsandhobbies No problem.. ;)

sounds nice!. I have 4.10's on my Machomatic. On the highway I put it in overdrive. my mac exhaust finally rusted out. Went with Magnaflows catted X-pipe . With American racing long tube headers. Throw some STEEDA lowers control arms there. They track on the money.

@carsandhobbies

Жыл бұрын

Very nice! I actually ended up getting maximum motorsports lower control arms and it made huge difference!

@pwrshots

Жыл бұрын

@@carsandhobbies cool. look into some adjustable shocks for the rear. I have the original tokicos. on the stiff setting, it really plants the rear end. great for launching. you can always soften them up for the twisties. also have the adjustables up front with maximum motorsports caster camber kit. the caster camber kit is just about useless as it is hard to find someone that can adjust them properly. 😅

@carsandhobbies

Жыл бұрын

@@pwrshots I'll definitely look into those, thanks!

Changing the rear gear is one of the best dollar to performance mods out there.

@carsandhobbies

Жыл бұрын

Oh definitely a huge improvement

Do a car review of your beautiful mustang

The 5th gear is the only thing I don’t like about the 4:10s just feel it just gives up on going fast that’s why imma go back to 3:27s

Good video

@carsandhobbies

2 жыл бұрын

Thanks!

Sound sick i got 04 gt sc thinking about going 410

@carsandhobbies

Жыл бұрын

Good choice

Great job on this video, I’m on the verge of 4.10s in my 96 Cobra. I may have missed it, but did you need your speedo recalibrated? Thanks!

@carsandhobbies

Жыл бұрын

Yes, I needed a tuner to recalibrate but the 96 cobra has a speedometer gear, so you can just change that

This car is damnn near perfect

@carsandhobbies

Жыл бұрын

Thanks!

NA 4.10 see okay for gas. If you’re boosted you’re gonna be in single digit mpg. I have 3.55 on my SC Saleen, perfect power and traction.

@carsandhobbies

Жыл бұрын

Not to mention you'll probably shifting out of gear very quickly with boost on 4.10's

The stock SN95 GT isn't the best on gas mileage but I do wonder what kind of gas mileage you get with a gear ratio upgrade to 3.73 or 4.10. I'm also curious as to whether it's better to leave the gear ratio at stock and add a supercharger. It's my understanding that doing both ends up with traction issues.

I installed 4:10 gears and my Mustang was considerably slower, especially above 4k rpms. I had them for three days before I went back to 3:55

@carsandhobbies

7 ай бұрын

Interesting, what year and model mustang was it?

Idk why but I want to buy a 2v and make it fast, I love an underdog story

@carsandhobbies

Жыл бұрын

Now's a great time to buy one you can get one in good condition for not that much money.

@otisdriftwood8469

Жыл бұрын

Do it! That's exactly what I'm doing with the 03 gt I bought 6 months ago. Great looking cars, that are pretty cheap to modify to your liking. It's a lot of fun.

Do you still like the 4.10 or wish you went with something else

I got 373s only thing siux gas it kills it thinking getting 355

Sweet video. I have a 4.6 2v as well, but it's an auto, and it's a lincoln town car. I have the stock 327 ⚙️ gears. And at 100mph, it's only at 3k rpm. Wonder what it would be like with the 4.10 gears. I do have a jmschip by pedalmax. Man, that helps out a lot with the acceleration. It doesn't add any power. But it definitely stops the drive by wire delay. I've had co workers in my car, and they all ask me what have I had done to my car. The only mods I have on my car are 1. Jmod 2. 2 1/2 inch piping from the cars into a X pipe out through a Roush axle back exhaust 3. A jmschip by pedalmax 4. A P71 air box assembly. 5. 20 inch chrome rims with tire size being 255/37

@carsandhobbies

Жыл бұрын

Nice! I heard the j mod really wakes up the autos, did you diy?

@sufyaanzubair5296

Жыл бұрын

Hey, does the JMS chip actually work? Ive seen a lot of reviews on chips and they dont do anything. Is it worth getting and what does it do specifically? Thanks

@hotrodlincoln7186

Жыл бұрын

@Cars and Hobbies the jmod, it did help out a lot. I still want to get a marty tune. But, I want to get some longtube headers first and just do one tune. But, what really woke my big boat 🚢 up was the jmschip by pedalmax.

What’s your exhaust setup? Sounds great!

@carsandhobbies

2 жыл бұрын

Off road x pipe, classic chambered power sticks mufflers.

I bought a stanger and always wondered what gears it has because I can take off on second

@carsandhobbies

2 жыл бұрын

What year is it? If it's a stock 99-04 it has 3.27

@benignocepeda7720

2 жыл бұрын

@@carsandhobbies it's not stock because it has been modified. I used to have a 00 saleen sc

@carsandhobbies

2 жыл бұрын

@@benignocepeda7720 nice those saleen's are sweet cars

what gears did you get and how was the break in? I'm getting Ford Racing 4.10s in a few weeks

@carsandhobbies

2 жыл бұрын

I got 4.10 gears and he said they don't need to be broken in if they're installed correctly. Put about 300 miles so far no issues.

@carsandhobbies

2 жыл бұрын

Probably change the fluid soon tho

@burmesebeef

2 жыл бұрын

@@carsandhobbies thanks bud!

I was thinking about going 3:90s but I don’t really use it on the highway but I like my second gear right now..do you think I should just go 4:11 or 3:90..Also where did you get it done for $300??

@carsandhobbies

2 жыл бұрын

I really like the 4.10's second gear feels pretty strong to me. I was looking at 3.90's too and I think it would be a great compromise tho, the only reason I didn't get em was I really wanted Ford Racing gears because I heard they are the easiest to get not to whine. If you get the 3.90's, let me know how you like em!

@NewEdgeDesigns

2 жыл бұрын

@@carsandhobbies definitely, but now that you said that, I may just go 4:10, or maybe 3:73..Lol 🤣🤣..It’s such a difficult decision…🤣🤣🤣

@carsandhobbies

2 жыл бұрын

@@NewEdgeDesigns LOL if they weren't so difficult to install I would try them both because the gears themselves are not that expensive

@NewEdgeDesigns

2 жыл бұрын

@@carsandhobbies I just called someone that works at a performance shop, he told me $1900 to do it with the bearing and seals…Basically to do it all because it may leak if you take the axels out and put it all together again…That’s ridiculous…I was thinking maybe $1000 until you said $300 now their telling me $2k WTF?? 🤣🤣

@carsandhobbies

2 жыл бұрын

@@NewEdgeDesigns What!? That's a rip off, I spent $270 on the gears bearings, seals, and $300 on the install. So ~$570 all in I'd definitely get a different quote. It only took my guy 3 hours of labor.

I just put 410 in mine and while it's a monster from 1st-3rd but I lost too much up top. I wish I had gone 3.90

@carsandhobbies

4 ай бұрын

Yeah 3.90 would probably perfect

@billymadison8036

4 ай бұрын

@@carsandhobbies and you're absolutely right about relearning shift points. I find myself reaching for the shifter to go from 3rd to 4th but it's already in 4th. Lol

@billymadison8036

4 ай бұрын

@@carsandhobbies KZread won't let me share link to my video I posted on here, but I have one where I did top speed run comparison

@carsandhobbies

4 ай бұрын

@@billymadison8036 yeah it's perfect for a 1/4 mile run but not much after that.

@billymadison8036

4 ай бұрын

@@carsandhobbies what sucks is the only time I get challenged is on the interstate. I never get challenged from a dig or slow roll

How high do u rev it when shifting gears? Like I have 3:73 gears I rev mine up to 6,000 rpm sometimes

@carsandhobbies

2 жыл бұрын

Usually about 5200 rpm

@ThatLoud3v

2 жыл бұрын

@@carsandhobbies the highest i rev the 3v when shifting gears was at 6100 rpm lol with no problems to

@carsandhobbies

2 жыл бұрын

@@ThatLoud3v yeah apparently people shift their 2v's all the way to 6000 I've just never tried lol

@ThatLoud3v

2 жыл бұрын

@@carsandhobbies when I had 2v I did it once lol nothing happened tho

@stepsimpson2815

2 жыл бұрын

Amazing bro! Thank u so much for the info I’m now certain I’m going with 4:10 on my 2 valve! Also got my power sticks with long tube headers and dropping my new motor in! Can’t wait to hear it once it’s all done

4:10 good for a stock 04 GT automatic?

@carsandhobbies

Жыл бұрын

Yes gear ratio wise, the only issue you may run into is because 1st is so short the transmission can often not shift fast enough into second before you run out of rpm so you'll redline for a second or two, before going into second gear. I believe a tune can help with the shift points.

What gas is in this car ? Are you cammed ?

@carsandhobbies

Жыл бұрын

93 octane and not yet but planning on it

how tall are you?

@carsandhobbies

2 жыл бұрын

I'm 6'2"

@xx-uq4rt

2 жыл бұрын

@@carsandhobbies i know it was weird to ask but i’ve been in the market to buy a new edge and i’ve always wondered if i’ll fit comfortably in one since i’m 6’1 and chubby, but after watching ur vids u fit fine in my opinion, or how comfortable would you say the new edges are towards taller people?

@carsandhobbies

2 жыл бұрын

@@xx-uq4rt I'd say you'll be fine, it's pretty comfortable to me with the seat all the way back.

$300, that's really cheap. Average price is $600. Labor is around $400.

I miss driving my stang😤🥹

@carsandhobbies

Жыл бұрын

Yeah they're fun