3x generic electric pen sanders vs. Dspiae hobby, model making, sander, drill, mini, cordless
Тәжірибелік нұсқаулар және стиль
These won't fit the Dispiae sander disc bits. Hobby bits come with 2.35mm and 3.0mm shafts. Dispiae & Dremel use 3mm. The cordless generic ones use 2.3mm. #electric #drill #sander
Пікірлер: 9
thank u for these very niche videos.
Any idea if the sander can take the Dispiae tungsten drill bits? I did think to buy the Dispiae but it’s basically just a pin vice
Are these electric sanding pens good for nub removal? Like, could I circumvent the nub trimming/filing process by just grinding the nub off with this?
@smallmodelcollector
11 ай бұрын
Even with 1000 grit the Dispiae takes off plastic too fast I think.
@bellwitch007
4 ай бұрын
I purchased the Dspiae sanding disc sets with extra sanding disc and It works great for nub removal but could probably run through the sanding disc fairly quickly. I use the sanding disc mostly for seem line removal and gap filler sanding.
Is that a quick change magnetic tool holder in your dspiae tool? if so where di d you get it, the allen key thing is a bit annoying
@smallmodelcollector
6 ай бұрын
No quick change sadly. A great idea if they did that.
@KAISERDJG
6 ай бұрын
i bought the little rotary tool and the polishing set, but mine tools different to yours , yours has that large stand off thing that holds the polishing pad. mine doesnt have that , how does that work is it two different parts or all one unit @@smallmodelcollector
Plastique?😳 Jman