You did a good job. Thanks for showing us how you did it.

Very cool, I wouldent have thought to do this how you did it. Think I'll do this when I put my own stripes on

VERY GOOD VID, YOUR APPROACH TO LAYING DOWN CARBON FIBER VINAL OR ANY OTHER VINAL FOR THAT MATTER MADE MY LAST FEW JOBS GO MUCH MUCH BETTER!! THANKS, MY HAT,S OFF TO YOU!!!

Nice technics. Also looks nice.

Wow. Looks great.

Fantastic video guys, we use the 3M carbon fibre to wrap our clients cars and it always looks incredible.

definitely no ordinary vinyl graphic.

Actually, you can buy it on amazon, its 3M Di-Noc carbon fiber vinyl, and im pretty sure its the same as any vinyl wrap

nice work love it

You makes it so easy....

True, they are build in Oxford (except the Countryman and maybe some others). But i would call it more an English/German/French hybrid these days. The technic and the engine are very very similiar to BMW/Peugeot.

you really helped me thanks!!!!

All the effort but you didn't remove the intake?

looks fresh

I would have aligned with the outer edges of the hood scoop

would looking awesome when you lay it down so it the texture looks like an "V"

good job mann :)

shouldn't the pattern of the strip on the driver side go the other way?

I was planning on using that brand, type but I can't find 1/4" rolls to use on the outer edges, as most cars have. I would be turned off if it was not made and it could only be done by cutting it yourself, I think it wouldn't turn out neat enough. I see aftermarket carbon stripe kits which have it, and it's hard to understand how that would work unless there is clear film under the material. Please explain?

The 2nd track was the Jam

You have to remove the air intake and open the bonnet so you can wrap the vinyl not only up to the edge....like you do it with the chrome part or the air intake in front of the windscreen. And if someone cuts of the vinyl on my mini like you do, he would have touched my car once and not again ;-)

@marianaplata8973

6 жыл бұрын

MCSRoehric

Bavarian Motor Works BMW is a Germain company Bavaria is a state of Germany where the HQ of BMW is located.

How does this hold up in high heat, high humidity places? My car will bake in the sun all day while I am at work 8 to 10hr.

i have this bubbles problem when i installed the 3m carbon fiber on my car's hood can u please tell me how to install it with out any bubbles ? it pissed me off

como se llama ese pegamento q lleva en los bordes?

whats the size of the stripes and whats the distance between the stripes?

Use a couple of drops of dish washing liquid in a squirty bottle and spray it on the back of the vinyl (sticky side)Then apply the sheet to the hood. with hard plastic squidgy, starting from the center on a 45° angle draw the squidgy to the edge of the sheet, removing as much liquid as you can. End result, totally flat no air trapped and not pissed off. Do not do this on a hot surface as the liquid will dry too fast.

was it hard to do the bottom part of the bumper?

I got answers to my questions in my previous post, but got another, is that the glossy or matte version?

I have a 2011race red five liter mustang, how would those look on my car ? Nice job BTW.

is having racing stripes on a MINI would consider "ricer" since MINI are not really racing cars?

example i want to remove ittt how i do ittt?????

Yeah, What is the width of the stripes?

What exactly did you brushed on the hood at the very beginning process?? BTW sweet tunes!

@huntwodada

4 жыл бұрын

Adhesion promoter

The watch could be a problem

What's the second song that plays?!?

Justin ❤

Faltou usar luva... para ser um serviço profissional...

Con LumaMex light background en the wrap

i like the way you pimp vehicles i would want to do the same ,iam in Nakuru kenya ,how do i get the stickers

How long does this stuff stay on?

What about removing these? Is it also as easy as this looks?

muito mais fácil aplicar com agua e usar uma trena para alinhamento

Imma put these on my minivan.

Well for one, it cost a lot less than having it painted and still looks professionally painted. Secondly, if you sell the car, the new owner can simply remove if desired. Just have the surface polished rather than pay it have it repainted. $ saved ☺

@chihong7507

6 жыл бұрын

DaytonCarCare DaytoncaRcare

@chihong7507

6 жыл бұрын

DaytonCarCare 😀😀

The first engines were manufactured by Tritec, a joint venture of Chrysler and BMW. Later minis have an engine of the PSA-Group insinde. Not a real bmw ;-)

NEVER put your fingers in front of a heat pistol kids

not only would be better to put a tape in the middle?

padre

For the record. BMW stands for Beirische Motor Werke and is defenitely an of origin german company. I also want to do my car but it has so many curves that it will be 300% harder than this video. Here the hood doesn't curve much.

Nice work. To bad that the intake in the front doesn't match the carbon stripes ;-)

What kind of music is this?

@LZM20522

7 жыл бұрын

ɷɷɷ Heeey Friendsssss I Have Foundddd Workingg Online Hacck visittttt : - t.co/DpGBarCUaA

nice job

@terrysimmonds1907

7 жыл бұрын

Jorge Cuéllar Alvarez

@pingphanthaniyong9540

6 жыл бұрын

ชอบ

I have to say your skill is freaking amazing. but I have a question, I am looking at doing my own stripes because i'm broke and my local shop is retarded and sucks at vinyl stripes. HOW would you go about getting the vinyl into a depth area like the trunk of a 96 ford mustang? I am ready to begin doing this, but i am really worried about the trunk.

ang pogi ko!!!!

personally i would have masked and painted the stripes must be an easier way

94 squirrels dislike it.

9:05 sl 55 ?

ur ryt,look like a beginner 4me.

Di-noc is not rated for exterior application on a vehicle, and a proper install with no stretch should not ever lift up especially in that area. We at CJC Wraps use primer on very difficult areas but we dont recommend using it on flat/useless places usually only use it on one or two spots on a whole car. get 3m 1080 carbon fiber, and a professional who's been doing wraps for a few years, oh and cutting on the paint. . . even as a professional I dont do this :( knifeless tape man, knifeless tape

@chihong7507

6 жыл бұрын

Joe Chlanda joechianDa

No tiene ni idea!!!!

what car do u hv that is more curvy than a mini? lol

@rickbarg3980

7 жыл бұрын

Alan Bolanon 55 Belair

The heart of a Mini is french... *gg

you need to spend some money on a good stainless steel olfa knife

A VANIA TA CANSADA RSRSRS

Ecco come fare in modo che nessuno venga li! Nessuna pulizia delle supersici pochi istanti prima dell'apllicazione per eliminare le impurità! Non si vede l'uso di un metro o di un calibo: tutto a occhio! Si smonta la maschera frontale, si attacca qualche cm di pellicola sotto nella parte nascosta e poi si rimonta la maschera. Stessa cosa alla fine del cofano! Altrimenti si riscia il distacco sui bordi... Complimenti per la poca precisione!

They're* and they're British, as they're owned by BMW. British Motor Works.

could you make a video of that to show that you actually have something of substance to contribute? Do you believe that your comment contributes anything worthwhile? What were you hoping to receive leaving this comment?

falto expediencia so!!!!!!!!!!!!!!

3m primer on the paint? what if you pull it off, you ruined the paint job! It's 3m you don't need to put in on the top, only under the hood. Should use a soft tip squeegie as well because you just scratched the paint and the vinyl.. Otherwise it looks good!

In 2 months that job will be worthless... Very bad methods used to stick.

its actually a Lamborghini...lol

kelamaan

quitate esos audifonos creo k no te ves como profesional! do you have Not professional

nice racing strip on a fuking slow mini

@ghostcar

7 жыл бұрын

serge933 - Compared to?

@markchavez738

6 жыл бұрын

Yeah slow compared to what? A proper race car? Yeah know shit.

DO NOT USE THE ADHESIVE PROMOTER. It is a nightmare to get off, and completely unnecessary especially in this situation.

what the hell? this is pernament

Mini's make you look like a prat.. Mini's with fake carbon fiber... Bigger prat

Why the hell did you just do that to your car? That's so fucking cheap.

nice job but you choose the gayest songs to post

padre