Worked great for me! I used Dawn dishwashing liquid, soaked well and covered with garbage bags that I slit to be one ply. Left on for 2 hours and removal was a snap. Came off easily in one piece and no residue (and it was a big window- I didn't even need to score it). Thanks so much for posting this:)

@m2o2u

7 жыл бұрын

Thanks for the garbage bag idea!

@lindadaugherty2996

2 жыл бұрын

beats using a rock

@cheeks6310

2 жыл бұрын

Wow. I'll try it out too. Thanks

@cheeks6310

2 жыл бұрын

@@lindadaugherty2996 rock 😂😂

@mikethompson9612

Жыл бұрын

Oppo 0

We did this on our front entry window (the skinny one beside our door). We used blue Dawn liquid dish detergent with water lathering it generously and applied cut garbage bags that we pre-cut to size. We left it on for 2 hours and it was SO easy to remove! It was so satisfying to peel it off. Would HIGHLY recommend this! Thank you so much for sharing.

Used this method to remove frosting film from the glass top of a coffee table today and it worked perfectly. Thank you for the info, despite it being posted almost a decade ago!

11 years later.....THANKS for this, I've got a few windows to do. I tried peeling without soaking and it wouldn't budge! Cheers

We just moved into a house that had this shit all over the back door, and we were staring and going 'how the hell are we going to do this.' We tried peeling it ourselves (which did nothing), and then my mom stumbled onto this video and it worked like a charm! Came off in big sheets and very easily! Thank you!

@TheBmsgolf

5 жыл бұрын

did you use bubble wrap like video or what did you use for the plastic?

So clearly explained with simple easy instructions and cheap materials needed. I look forward to giving this a whiz. Thanks matey.

Brilliant! It worked a treat! I just used a dishes brush with some concentrated washing up liquid and the results were great! Thank you! Enea

Absolutely excellent ! So glad I came across this video. If anyone had told me water could travel through plastic film in order to loosen the adhesive I'd have laughed at them, but it worked a treat. I used a bin liner and left it on for 3 hours, the film came straight off and left no trace on the window. Thank you very much. Relieved I didn't buy a hair drier..........

@cheeks6310

2 жыл бұрын

Lol. I was gonna use my hairdryer or buy a heat gun What a relief lol

Brilliant! Worked a treat, I left for 2 hours and super easy. Thank you for this great tip, last time I removed film I didn't look for expert advice first - it was a struggle and a half, never again.

Thank you!!! This video save me so much work! My signage installers didn't even know this trick so now they have another tool in their arsenal. They started to use a heat gun but I was too afraid the glass would shatter. I had eight door-sized glass sections with frosting that had to be removed. I thought it would just peel right off. I sure was wrong. After letting the sections marinate for a couple of hours I was able to get the job done. It still wasn't easy but oh so much easier than peeling tiny little pieces at a time. Some things I learned. Make sure every inch is wet. Even just a tiny dry spot will be a problem when it's time to peel. It dries super fast so just keep applying the soapy water as you put the plastic up. You definitely need to score into sections and remove one at a time. I did like 6" strips. I found it easier to start from the top and peel a strip down about half way and then pull up from the bottom. Place your entire hand sideways against the strip you're peeling so the pressure is distributed across the section. You'll experience less breakage this way. If you do get a section that separates from the strip take a moment to use a razor blade to get it started again. It'll be far easier then going back and peeling multiple pieces that broke off.

FANTASTIC, GREAT & TIME SAVING METHOD 👍👍👍👍!! Please take a bow 👏👏👏👏!! I have floor to ceiling windows, and EXACTLY as you said & showed, the frosted privacy film came off with NO EFFORT 😁😁😁 Thanks for saving me the 6 hours it probably would've taken with a razor blade

WOW just used this technique today and it totally works! THANK YOU for sharing! No residue either! We left bubble wrap in place for 2hours and then peeled off super easy 🙂

Good on ya cookie! That's brilliant. This stress free tip has saved me heaps of time and effort. Thanks

Works a treat, followed it to the letter and it came off nicely👍🏻👊🏻

Great piece of advice. Dishwashing liquid in water, split bin bags, left bags on for two hours and came off two big windows (2100 x 700) in one piece.

@zigfridtijunelis616

4 жыл бұрын

Check this out - some work involved, but no waisting of 2 hours - instagram.com/p/CBBlR8sDsNn/

One of the most useful tricks! Thanks!

I am hoping this will save my sanity this week as we attempt a frosting removal. Thank you for the tips & tricks!

@zigfridtijunelis616

4 жыл бұрын

Check this out - some work involved, but no waisting of 3 hours - instagram.com/p/CBBlR8sDsNn/

One of the best videos I’ve seen, explained well!! Thank you so much !

This worked like a charm. Thank you, thank you, thank you...

Just tried this and it worked great in conjunction with a flat razor. I was working on decade(s?)-old textured film some of which I tried to muscle off. To my dismay, removing them dry left most of the adhesive, which mostly just smeared when I tried to scrape it off.

I'm going to try this tomorrow. I appreciate your sharing this.

Thanks!!! I been trying to scrape this for an hour

Thanks for this excellent tip Chris!! Great time-saving hack. This is what makes YT great.

Thank you . I just used your method to remove film which is 2 years old. It works! Thank you for sharing

@zigfridtijunelis616

4 жыл бұрын

Check this out - some work involved, but no waisting of 2 hours - instagram.com/p/CBBlR8sDsNn/

Fantastic- was going mad trying to take of the plastic in small bits breaking a few fingernails in the process !! Thank you

Thank you so much. Really appreciate your personality! This will be my project for the next week.

Great video, I'm now waiting the 2hrs to see how it comes off. Thanks!

@ogmagicman546

3 жыл бұрын

How did it go? Lol

This video was extremely helpful!! Thanks so much for it :D

Works 100% I had 3 pain in the arse windows that were causing me a bit of grief. Came off pretty easily after that. Just make sure you follow the instructions and soak the window well. I owe you a beer.........

This was ABSOLUTELY AMAZING!! Thank you SO MUCH for sharing!!!😊. You ROCKED!!!

I tried this and it worked well to take off the frosting however the adhesive was left on the window. If this happens to you then put more dish soap/water onto the adhesive and put the plastic back up for a few hours, then use a window scraper and it comes right off. Thank you!

Legend!! Thank you for this

Worked Perfectly! Thank you

Worked a treat.Thank you.

Awesome. Many thanks for this great tip.

Very well explained and demonstrated!

You save my day bro!

I am SO glad I found this video! I purchased a huge mirror at a sale that has frosted letters on it, thinking I could remove it easily. However, I then started watching videos that said it couldn't be removed because frosted is the same as etched, and that the glass is actually 'cut'. You have made my day! I'm sure I can take it off now!

Very helpful! Thank you very much.

THANK YOU SO MUCH!! I have an upcoming removal - and I know you've just saved me from looking like an incompetent idiot!

Wow. Thanks for the video it's very helpful! It looks like a lot of work to remove. Now it makes me think if i still wanna put the film

I liked this video. However, I kid you not. I'd intended on trying this simple method bc I had dawn dish detergent and bubble wrap in the crib. Then, I noticed something on the first window that I was going to treat. Next, to wipe whatever it was that I saw on the window, I used one square of a Clorox disinfecting wipe. Before I knew it, the Clorox disinfecting wipe began to break down the window frosting. With a little more elbow grease and pressure, the window frosting was pretty easy to remove. So far, I've removed window frosting from five windows in my apartment. Remember, you have to keep the window wet with the solution that is in the Clorox disinfecting wipes.

Thank you so much for sharing this tip, is going to help me tons tomorrow

This is a great tip for those conference rooms that have film installed on the "Fabrication Debris" side of the glass where Triumph Scraping isn't an option!

Thanks I can used all the information 👍🏽when I start my frost film glass🤪

Used a hair dryer but didn’t work at all was worried the glass might crack But I’ll try this method which I’m sure would work Thank you for posting

Thank you. Your video is very helpful.

Thank you for all the great info 💥

I love his explanation. I just got new film for my bathroom door's window and started to try to remove the film with a window scraper. Couldn't be done. I'll be trying this method because it looks so easy!

Cool. Thanks for making this video.

Wow! I can't wait to try this.

THANK YOU SO MUCH It came off a treat :)

Great tip hope it works for me I bought a french door home depot and it had plastic on window pains & never could take it off so hoping this works. Will post if it does

Thank you so much, It actually worked.

very smart. thank you

GOOD TO KNOW!

Thank u so much for sharing this handy hack. god bless!

I was so impressed with the efficacy of Cookie's film removal technique. In search of a rare kind of pleasure I adorned all my windows with a coat of frosting - seeking the satisfaction derived from its removal. Alas I have been living in a twilight daze for the past 10 years. Lacking the opposable thumb strength needed to relieve the window of its coating, I have been starved of the sun's yolk. I have grown very weary in this dwindling light... we live as we dream -- alone.

thank you! you a star!!

Thank you for sharing =)

Fantastic...the water and washing-up liquid was exactly what I thought was the route but the 'cover with plastic' bit is the tip that I would never have considered.

So helpful!

thank u for d tips ...

IT WORKED!!!!! 🎉🎉🎉🎉🎉🎉

you rock! thank you

I know u can use anything but would u use bubble side out or bubble side in towards the window?

Will be trying this on a frosted film-cut logo of a company brand and report back, cheers!

Can i use a grease remover instead of the dish soap? as a more abrasive agent? thanks

It really works..thanks for sharing this trick...can you please share how to remove wallpaper from wall ? If you know..

Life saver

Hi,could you please let me know what kind of detergent you used to take of the tinting on the windows.Thank you...Nancy

Can this Window frosting be used on outdoor windows? I'd like to frost a deck of mine that has four large glass panels.I live in Canada. Will the rain and cold weather destroy the vinyl frosting?

Thanks ❤

Can I use cling film instead of bubble wrap ?? Thanks in advance.

I bet like me, you though vinyl was water resistant and this def wouldn't work!.. Trust a crafty Aussie to think of a trick like that...(that tip alone was worth the sub) Cheers cobber!

Better than my idea of wetting old newspaper onto the film, but basically the same approach, water plus detergent plus a bit of time :) Thanks great-useful Vid' :)

if you have smaller windows, Say half frosted windows just use fairy liquid straight on . leave to soak for a bit then use a blade or a yellow window scraper and it just comes straight off.

Excellent. Thanks for the info.

Wow I love you. ❤️❤️❤️You have me so much money.

just wondering would it make easier or harder to remove if I soak the film overnight?

Will this work on frosted ceiling fan covers? Specific the smooth, shallow dome ones

Good on ya mate

Should have utubed this before I started my removal. A bloke who installs window films told me to use a heat gun, but that didn't work very well, as it leaves the adhesive behind in some areas. Absolute pain the ass to remove now. But I'll have to saturate it with soapy water for 2hrs to scrape that off now.

I have a outdoor 18m2 of printed vinyl with laminate on window glass need to remove, I wonder if this way works as well, many thanks.

@zigfridtijunelis616

4 жыл бұрын

Check this out - some work involved, but no waisting of 2 hours - instagram.com/p/CBBlR8sDsNn/ We also removed 6 year old printed vinyl from windows - instagram.com/p/B_-Pij8DOOu/

i have a store front with old decals will this work i need to remove them

Would it work on lighting fixtures?

Can this be done to slit a strip in it, keeping the remaining frosting undamaged?

I have interior film on my home windows and have a light calking material around the seem between the film and the edge of the window - this film was installed by a previous owner and is for heat reduction - my question is how do you remove the vynal caulk so I can remove the film.l

My sliding glass window tint is 22 years old and has scratches and tears all through it..I’m sure it won’t come off in one sheet...any suggestions

impressive

Does this method also work for film that has been on a westerly window for about 10 years?

not going to lie, I doubted it...it didn't work as good as in the video, but it is definitely the answer to get this kind of vinyl off

The chance of glass cracking doesn't start until it gets to 150c or 350F cutting the vinyl into smaller more manageable strips and heating it up to 80c-100c works just fine In the hour you left it to soak in water it would have finished.

@tedjames9176

4 жыл бұрын

Travis In Canada Exactly. Cut 6-8” wide strips and use a propane hand torch and keep it moving not stopping the flame in one spot. I would have had that piece removed in 10-15min.

I took a similar film off of my mirrored closet doors, but the glue is still adhered to the mirror and it is tacky feeling and looking. How do I get the glue off the mirror? It seems that it will be more of a job than the getting film off was. I did something wrong obviously.

How do I remove frosted glass paint?

Does this method work if the frosting has been on the glass for months or years?

@Z0MBIEPIGMAN

4 жыл бұрын

It did work for me at a really old tint.

I had tried the hotgun method to no avail. I am eagerly waiting to get home to try this method.

@zigfridtijunelis616

4 жыл бұрын

Check this out - some work involved, but no waisting of 2 hours - instagram.com/p/CBBlR8sDsNn/

Does it work with vinyl stickers?

Can I pop the bubble wrap while waiting?

@redlady935

5 жыл бұрын

I really wanted him to pop it😂

@edgardpons7351

4 жыл бұрын

OFF Course, I will recommend you using a meat hammer, it goes faster..........😃

Hi! I want to apply a frosted glass vinyl to a mirrored closet to change the style of my room. Could I take it off with this method if I don’t want it anymore? Will it get off the mirror without damaging the mirror?