What is your opinion on Sio2 shampoos?

@archiepezek

2 ай бұрын

I've used a couple different ones and didn't care for them. Like you said, I'd rather use a regular soap with lubrication and apply the si02 myself. Thanks for the video Brian.

@audieconrad8995

2 ай бұрын

The only one I use is the TW Hybrid Solutions Ceramic Shampoo. I use it on my personal cars as a maintenance wash. I'm perfectly satisfied with it as I use much of their Hybrid line on my cars, so I use the SIO2 Shampoo as part of the Hybrid Solutions system. It works really well within that narrative.

@kimnewling5728

2 ай бұрын

Nope. Don't like them.

@richardseem7948

2 ай бұрын

CRAP!!

@richardseem7948

2 ай бұрын

Awesome video and product review good friend

Apex Auto Detail, You're the best! I just had to subscribe!

Really appreciated the clear bucket to see the product addition and reaction.

Gyeon Bathe + is 100% for me

@hectoralvarez1792

2 ай бұрын

nothing compare like Gyeon Bathe +

Thanks for the great video. Will give this product a shot. I didn’t have the greatest luck with mothers cmx…but seeing how well this did after a contact and dwell, your demonstration proved how well it things came back / unclogged

I appreciate the review as 3D has been making some nice products. When this technology first came out I bought a bottle and threw it away after two uses. Just spraying a drying aid is easier and allows for a more lubricious soap to be used like Apex.

Great review Brian never have been a fan of the protection shampoos. I’m always putting a dedicated topper almost after each wash. Always appreciate the content and hard work you put in to bringing us videos.

@MrKennyanders

2 ай бұрын

Do you notice you can flood a panel even with protection if you want to

Thanks for this review, Brian. It reinforces my opinion. I have tried one but have decided that I prefer a quality wash with nothing added be it SIO2 or wax. Just plain good shampoo. I'll do the two step dance - wash and then wax (or whatever).

Good tips. I think that the combo shampoo will be off my list from now on. Straight shampoo is going to be my go to from here on in. 🇨🇦👍👍 PS The Stoner ceramic and speed beads detailers are now in my stock after your review of them.

Wow that mjjc bottle looks BEAT!

Nice vid 👍💪

If people use Apex auto wash they never need another soap imo...

I’m using the angel wax products, with very good results.

Another great video Brian, what is the shampoo you reach for most often for an average wash?

FYI, I don't use a ceramic shampoo. But I do like the 3D Nano Pale Shampoo. I use 1oz in foamer & 1 oz in bucket. It is highly concentrated. My next shampoo will be P & S Pearl shampoo, also can be used as a rinseless. After I foam, I rinse down to up, then up to down. Thanks for your expertise...

No Si02 but, Incredible Suds is My favorite by DIY DETAIL.

Brian have you tried the armor all ceramic shampoo? I don't use it as a wash, but it foams well and leaves good protection so I foam it on after the wash.

Please review labocosmetica products

Not sure if this has ever asked before so apologize if that already happened. But what if you would add another bit of good shampoo together with this stuff in that same bucket, something that is really slick?

Although I use alot of 3d products i stay away from the glw line . I think that line is geared towards the people that are looking for a step up from anything Walmart has to offer. Ill stick with the gyeon shampoo line . Ty for the video .

What SIO2 spray do you use the most?

Have you done videos on your glass products, coatings are so expensive how is your glass sealant as the Grios I got is terrible.

hello my friend....i sent u dr beasleys ceramic body wash a few years back which you were very impressed with. is it still the best in that category????? has no si02 in it but was created to clean and rejuvinate coated vehicles and in that video u stated you may have finally found the best shampoo and was very impressed with the lubrication. just wondering...be well my friend

These shampoos perform better in a pressure foamer. A large amount is wasted in the backet, as we see there is much water left. The same amount of product if it was thrown in a pump foamer, would make a much higher concentration of solution. So when foaming part by part, the foam would sit on the mitt and on the panel, not in the backet

No bueno. Apex auto for the win.

🍻🍻🍻🍻

I think the entire detailing industry has gone bonkers, I rinse, foam with shampoo and wash, yet to mar or even micro mar a car, wasted money, wasted product wasted time, if you want protection apply it separately don’t over complicate the process

@adamcoe

2 ай бұрын

If you've contact washed a car, you've marred it on some level. Maybe you can't see it immediately, but even the nicest towel with the nicest soap still leaves very small marks that add up eventually.

@liamneale1831

2 ай бұрын

Even so if you’ve only “rinsed” before contact wash

@SandS-Mobile-Detailing

2 ай бұрын

Not, 28 yr veteran, understand how the game is played, 9-10 ppl don’t know what micro marring is if no one’s ever complained you’ve never done it

Its like a ceramic detailer thats harder to put on..

Did someone roll over the lance bottle with a car?

Why are you not using a Kranzel pressure washer?

@NickVetter

2 ай бұрын

His pressure washer seems to be working fine.

Nice to know, but definitely I don't do or like sio2 shampoos

Not a fan. They leave streaks on windows if you are working outside with them

Im not liking it, Brian. Sorry. The MJJC seems cheaply made, too. Thanks for review Brian

Naa.. im good 👍🏻

These products don't make sense to me... seems like it'd be trying to coat over dirt and I don't see how that's a good thing.

So Sad 3D GLW series is just poor all around. 3D makes good products. I have no idea what they were thinking with GLW Series

ᴛʜᴇ ᴏɴʟʏ ᴘʟᴀᴄᴇ ᴡʜᴇʀᴇ ᴛʜɪs ᴀᴍᴇʀɪᴄᴀɴ sᴄʀᴀᴘ ʜᴇᴀᴘ ʙᴇʟᴏɴɢs ɪs ᴀ sᴄʀᴀᴘ ᴘʀᴇss

Za dużo marketingu i mało wydajny są lepsze produkty

I'm not sold on any ceramic products. Seems like an overpriced gimmick

@yukonstriker1703

2 ай бұрын

Couldn't agree more!

@videomaniac108

2 ай бұрын

Try Gyeon Bathe+, you might be surprised.

the only place where this red ame ric an scrap heap belongs is a scrap press

I think detailing has come to a plateau with products. Nothing innovative nothing special about anything that comes out today, I'm pretty sure everyone can agree.

@dawondjones

2 ай бұрын

I definitely agree with that, but in a sense I’m glad I’m getting to enjoy what’s out there

@Admin-ie9hp

2 ай бұрын

@@dawondjones ya I hear ya

@RYUX1-

2 ай бұрын

You couldn't be more wrong lmao

ᵗʰᵉ ᵒᶰˡʸ ᵖˡᵃᶜᵉ ʷʰᵉʳᵉ ᵗʰᶤˢ ᵃᵐᵉʳᶤᶜᵃᶰ ˢᶜʳᵃᵖ ʰᵉᵃᵖ ᵇᵉˡᵒᶰᵍˢ ᶤˢ ᵃ ˢᶜʳᵃᵖ ᵖʳᵉˢˢ