I have two boys with Autism, love the puzzle tumbler.

@AngelBDesigns

Жыл бұрын

Thank you. My youngest is autistic. I love this design as well ❤️

Absolutely beautiful! ❤

@AngelBDesigns

Жыл бұрын

Thank you ☺️

Excellent work!!! I’ve learned a lot from your video.

It came out great.

Thank you for sharing the video. I love your shirt as well

@AngelBDesigns

Жыл бұрын

Thank you ☺️

Thank you for sharing the video, you did a really great job.😊

@AngelBDesigns

Жыл бұрын

Thank you ☺️

Beautiful ❤

Thank you so much for this video. I’m learning so much

@AngelBDesigns

Жыл бұрын

Thank you so much for watching. I really appreciate it ❤️❤️

@cain1906

Жыл бұрын

@@AngelBDesigns what are your recommendations for someone just getting into this. I just started doing ink tumblers in May and now attempting my hands at sublimation. I have a large heat press with the, I guess different size cups Could I use this, if I do not have a tumbler press? I saw people using an airfyer as well. Just wasn’t sure. 🤔 I do have a extra airfyer. I just didn’t want to go out and purchase all this equipment, if I can you things I already have. Anyway, thanks for the videos. I’ve been binge watching your videos.

I love your videos thank you

@AngelBDesigns

Жыл бұрын

Thank you so much ❤

You did a beautiful job.

@AngelBDesigns

Жыл бұрын

Thank you ☺️

@SheWritesHerJourney_

Жыл бұрын

@@AngelBDesigns you’re welcome ☺️

i noticed you answered the question already

This is beautiful! So do you only press each side for 45 seconds? I think I watched another one of your videos but it was longer time? I’m new to this 😊

❤❤❤

@AngelBDesigns

Жыл бұрын

❤❤❤

I love the autism tumbler! My grandson is autistic...

@AngelBDesigns

Жыл бұрын

Thank you ☺️ my youngest is autistic as well ❤

LOVE this! Do you know if the images can be cut down to use on mugs?

@AngelBDesigns

Жыл бұрын

It might be a little too big for a coffee mug. The words would get cut off. But you could probably just use the puzzle pieces

@becomingdryork2919

Жыл бұрын

@@AngelBDesigns thank you!

Is there special paper to purchase to make the cup?

@YulnikitaSinger

10 ай бұрын

You can use A-Sub paper....it is fantastic for sublimation

Hey Angel B. Once we buy the file, can we change the name from mom to teacher ?

@AngelBDesigns

Жыл бұрын

I don’t believe so. It didn’t say it was editable

Paper type plz

Love them! I am new to sublimation and I'm not that successful with getting bright colors. (Using ET-8550, Cosmo Ink, A-Sub Paper, Print Drivers are installed and updated, images purchased from Etsy, pressing tumblers at 365 for 60 secs then rotate for another 60 secs...anybody have any suggestions on how to achieve bright colors?? TIA

@AngelBDesigns

Жыл бұрын

Only thing I can think of of is upping your temperature. It should 385 or higher. Or it may be the actual tumbler.

@angelahowze6423

Жыл бұрын

Make sure you are pressing in hard enough on heat press and I always let the tumbler sit for five minutes after removing from heat press. I see a lot of people unwrap the tumbler immediately.

@anishafurbee7539

Жыл бұрын

I was having the same problem. Look up sublimation printer settings on youtube there’s videos on it. I had to go in and change printer settings to 15 saturation and 4 density it changed the images so much love how bright they come out!

@svenholmgren5015

Жыл бұрын

Have you gotten the icc file for the ink brand you are using?

@elevated-apparel

8 ай бұрын

​@angelahowze6423 you don't have to let the tumbler sit for 5 minutes. Been doing sublimation for 15yrs and we never let it sit we pull it off asap. Also she used excessive tape. We use 3 pieces

I’m needing help; I have also bought a 3D print from Etsy but when I go to heat press it; the puff isn’t puffing 😔 any suggestions ?

@rebecca8808

6 ай бұрын

it should be puffed already when printing on your tumbler

I'm confused. Ive watched so many videos on the 3d puff tumblers and I'm not understanding how this works. How is it printing puff, if you just use regular sub paper to print? Thanks!

@AngelBDesigns

Жыл бұрын

It’s the way the image was made. Now I’m not sure how to make the image but when it’s printed, you can see the puff effect before even pressing. It’s just once the ink is activated by the heat, the puff effect becomes more noticeable

@pattypreston8301

Жыл бұрын

@@AngelBDesigns I did not get a puff.

@ohreally404

11 ай бұрын

That's because it's not "printing puff", its a 3D design so it just gives the illusion that its puffy. You can see it at 3:17

@user-mx3yd1et8z

4 ай бұрын

Very easy to understand this tutorial. I assume you have to begin with a puffy looking image and where do you find them? Or is it possible to make them?

How do I flip this before I print it?

@lindabradford9591

6 ай бұрын

You can do it in the program you're using or on your printer, it may say mirror.

I got a puff wrapper and when I done it on my tumbler it never puff

I wish this was for also for people without this program 😕 😔 i don't have Silhouette.

@AngelBDesigns

Жыл бұрын

Like I said in the video, the basic edition is free. But if you don’t want to use it, you can print from anywhere you normally print from. The software doesn’t matter because I didn’t make this file, I purchased it.

@kelleywells3728

Жыл бұрын

I usually print from WORD. Just resize to the size of your tumbler

Can’t you change the writing on the file?

@AngelBDesigns

Жыл бұрын

You probably could in photoshop it something but I don’t use those programs

I have tried 2 mugs and no puff! What am I doing wrong?

@AngelBDesigns

11 ай бұрын

The image has to be a puff image

how can we make our own 3d without having to order them from someone

@lindabradford9591

6 ай бұрын

Try Canva, Inkscape something like that