3D Printer make Smash - Custom Hulk | Groundeffected.com
Тәжірибелік нұсқаулар және стиль
I convinced myself to make the entire avengers and i made ironman in a previous video, this video is the hulk and how i painted this 3d print from wicked3d
Wicked patreon : / 3dwicked
www.sunlu.com
⭐️Huge Thank You to My Patrons: / groundeffected
MERCH Now Available! - groundeffected.com
🔔 Find me on SOCIAL:
Instagram - / groundeffected
Facebook - / 548001063221083
TikTok - / groundeffected
Discord - Available through Patreon
Website - groundeffected.com/
🎨 Supplies: elementgames.co.uk/?d=10734
🖌️ LIST:
▪️ The Army Painter Wet Palette: amzn.to/3x1VmIN
▪️ Vallejo Black Primer: amzn.to/3PLtpMv
▪️ Bamboo Synthetic Kabuki Brush Set: amzn.to/3t09Ru5
▪️ Tenacious for Strengthening Prints: amzn.to/3CTSU6X
▪️ Bostik Blu Tack Mastic Adhesive: amzn.to/3a3233S
▪️ Vallejo Fairy Flesh Set: amzn.to/38pbUAT
📍 Check out ROXY ROSE!
_roxy_rose?utm_...
vm.tiktok.com/ZMLxUenru/
📌 Playlists to Watch!
Brush Control:
• Brush control
3D Printing:
• 3D printing
Painting:
• painting
📌 Other Videos You Might Be Interested In Watching:
What happens when you stroke your brush? Important knowledge!
• What Happens When You ...
I painted a 3d printed Djinn and her pet
• I Painted a 3d Printed...
Using powders to enhance your hobby?
• Using powders to enhan...
How to change FEP sheet for resin 3D printer
• How to change FEP shee...
#3dprint #3dprinter #3dprinted #3dprinting #acrylicpainting #paintingspiderman #resinfigures #resinfigurepainting #spidermanps4 #spidermanps5 #3dprinting #3dprinter #painting3dprints #miniaturepainting #howtopaint3dprints #3dprinted
Technical mumbo-jumbo below:
---------------------------------------------------
Related Phrases:
How I painted my 3D print / Spiderman, 3D Print, 3D Printer, 3D Printed, 3D Printing, Acrylic Painting, Painting Spiderman, Resin Figures, Resin Figure Painting, Spider-Man Ps4, Spider-Man Ps5, 3D Printing, 3D Printer, Painting 3D Prints, Miniature Painting, How To Paint 3D Prints, 3D Printed, 3D Printed Miniatures, Mini Painting, Resin 3D Printer, 3D Printed Minis, 3D Print, Paint 3D Print,
Disclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of watching any of my publications. You acknowledge that you use the information I provide at your own risk. Do your own research.
Amazon: Groundeffected is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn commission fees. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Copyright Notice: This video and my KZread channel contain dialogue, music and images that are property of “Groundeffected”. You are allowed to share the video link and channel, and embed this video in your website or others as long as a link back is provided.
© Groundeffected
Пікірлер: 155
Using white for the irises creates a color that looks really close to the old 70s TV show when his eyes would turn green first.
MY GOD! that bag of Lays potato chips looks so real, good job!
You know there is just days from time to time where it’s hard to get excited about painting commissions or even stuff for myself but ur videos always get me excited and inspired. Keep it up my man.
@Groundeffected
Жыл бұрын
I’m glad I can do that for you dude !!
@Vlad-fd9xi
11 ай бұрын
@@Groundeffected Good afternoon! please tell me what model of 3d printer you use and what material to make the figures.
Incredible! Awesome work. Hulk is one of my top two favs.
@Groundeffected
10 ай бұрын
Thank you!
Amazing
Turned out frigging awesome.
Nice job man. Picked up some nice pointers on getting that tone of green. I never thought of using purple as an undertone. Nice trick.
I've been watch you for the past couple of weeks learning about the different layers and colors... Thank you...
Amazing piece of work. I hope you can make more of this.
That... Is... Just..... Bloody... Fan...Tastic!!! Awesome work! The bag of crisps look damn good too!
WOW!!! Amazing job!!!! Great Hobby !!! would love to try this
Thanks so much for this. Highly useful and solidifies some techniques for me :)
Brilliant build 👏 excellent 😊
Excellent job, where did you get the drawing of the base?
I am currently do that same model! Thank you for the great video! You definitely kick ass
You are brilliant buddy what a character!!!
Excellent job brother looks freaking amazing.
Awesome work! thanks for sharing Dad. The beauty shots with the Lay's BBQ Ribs potatochip bag completes the whole video. :)
Excellent video, thanks for sharing
just finished printing this model , hoping it turns out half as nice as yours
I like it! Beautifull!
Awesome Work 😍😍😍
can only hope to be as good as you some day. very impressed
Brilliance
Great colour scheme for the hulk . Your videos still amaze me . Great work as usual
@Groundeffected
Жыл бұрын
Thanks a bunch!
Dad, I really enjoyed this one. I did a large hulk about a year ago doing the hulk thing to a hulk crusher.... I really loved your color scheme.
I have been really hoping you would do a statue with odd colored skin. Hulk is perfect. Killer video as always.
@Groundeffected
Жыл бұрын
Well there ya go. Also look back I did a video on drizzt in weird skin tones
Thats looking soooooooooooo lit, man! Beautiful work, and the finish is stellar!!!!! Muchas gracias for giving the dio a chance and can't wait to see the complete set, my dear amigo!!!!
@Groundeffected
Жыл бұрын
Thank you 🙏 the set will be so sick!!
Great Hulk! My goal is also to do the Avengers diorama, so this is perfect for me!
@Groundeffected
Жыл бұрын
Well then you’re in the right place haha
You absolutely smashed it! Looking forward to Black Widow next 🔥🔥🔥
@Groundeffected
Жыл бұрын
Coming soon. Haha thanks dude
This is the first vid of yours i've seen; but I absolutely love it. So much more entertaining than just some boring tutorial. It was informative and entertaining. I loved it! I've painted 30mm scale miniatures for a long time, for things like D&D and Wargaming. But I've been on a superhero kick lately and am looking into 3d printing and painting on this larger scale! I can't wait to check out more of your stuff!
@Groundeffected
Жыл бұрын
Glad you enjoyed it! And even more half to entice you into printing and also sorry for feeding your addiction to smaller than life size super humans hahaha
great job on this model.bravo
@Groundeffected
Жыл бұрын
Glad you like it!
The green really pops! 😍🔥 Its very nice!
@Groundeffected
Жыл бұрын
Thank you
Es increible el nivel de detalle en todo! felicidades!
@Groundeffected
Жыл бұрын
Thank you.
Incredible! Nice work!
@Groundeffected
Жыл бұрын
Thanks a lot!
Dope as usual !!
@Groundeffected
Жыл бұрын
Appreciate it!!
Great video, as always, but I am SERIOUSLY all about that cap! 😃
@Groundeffected
Жыл бұрын
It’s a gangsta cap for real
Very cool 😎
Damn that's NICE outstanding paint job on the Hulk , but the hat you have on is down right Killer go spider man go , enjoyed
@Groundeffected
Жыл бұрын
Thanks dude
Amazing as always! I learn so much watching you man. I love the picture on the bottom of the bases. I think Im gonna do that from now on too! Also do you have a preferred magnet you use for magnetizing large prints?
You dont have any idea how useful its going to be once I'll buy and print that model hahaha. Love your work
@Groundeffected
Жыл бұрын
Awesome dude!!
THIS HAS 2 B THE BEST HULK EVER!!! THANK YOU!!!!❤😂🙏🫶👍❤️
This is amazing my friend! I am attempting to recreate similar using your techniques. I am still pretty much a noob at this.
You are impressive Sir. Will try join next month when I finish my "Death Note" diorama to get your inputs. Well done!
wow you must have had a good day. that came out Amazing
@Groundeffected
Жыл бұрын
Yes I did
Wow wow wow
I think "The color of leaf mid-summer" should be a bit more aggressive... whatever tf that means. lol
Sponsored by Sunlu and... Lays ? 😝 incredible! But I'm not sure that's enough to satisfy this big green guy! I wanted to go for a big print, there are too many choices. Maybe I'll go for this one! Dad's version is amazing !
@Groundeffected
Жыл бұрын
Haha man I’d take lays sponsor anyday
I’m about to try and paint this one once my bambu completes it this weekend. Do you have videos on how you do the comic picture on bottom of statue process and just that ?
Ficou da hora
Hahahahahahahah this is great.. Amazing video and paint job.. Cheers!!
@Groundeffected
Жыл бұрын
Thanks
Awesome!! you are very f****** talented!!!
@Groundeffected
Жыл бұрын
Thanks
Awesome job dad!!!
@Groundeffected
Жыл бұрын
Thanks!!
Awesome! What colour was the final dry-brushing after the dark red? Thanks 👍
I'm on the same project as well. Cap is done, Hawkeye is next and Hulk is printing now. Great minds ...
@Groundeffected
Жыл бұрын
Sweeet. It’s gonna be a long ride I think. Cap looks tough
@nicwester1
Жыл бұрын
Well I'll post it to AOTM, once I get access. Discord is being wonky RN
nice
Knk bu inanılmaz bir yetenek çok başarılı tebrik ederim 👏👏
Love your videos!! So you don’t have a spray booth or anything? You just paint in a box? I printed the Hulk following exactly as you didn’t and it came out really well, but had over spray everywhere even with a homemade spray booth because he is so big. Looking for a better booth.
Que figura tan calidad
Damn it. Now I have to do this one. So just got the stl files and its doing the resin parts now. Did you do your base in resin or FDM? I am a close to 60 year old dude who is just getting into the hobby and airbrushing. Why not start big with the Hulk.... :) Great channel and I have watched pretty much all your videos over the past few months. I have watched them all the way through and have not fucked off yet. :)
Amazing work as always. For when the all team united like the movie scene? Thor and Hawkeye? For the moment i think Hulk, BlackWidow and IronMan are the finished....i'm wrong? Keep on going, love your work....huge portuguese fan here. 😊
Thanks for the soggy crisps dad!❤
@Groundeffected
Жыл бұрын
Any time!
Hey Dad, you should do one on closing seams when keys don't fit... and printing quarter scale. Tips on printing quarter scale. Bases and shit can be huge at that scale. How do you approach it?
Fuck yeah I am gonna follow this the best I can cause I want mine to look as good
@Groundeffected
Жыл бұрын
Haha keep us updated in discord.
Father! What 3D printer have you enjoyed using? Thinking of getting myself one and looking for recommendations to research
Awesome as always but what happened to your thumb?
@Groundeffected
Жыл бұрын
Urgh. I lost a fight with a sharp blade.
Is there any chance of you making one for sale? I’m a hugeeeeee hulk fan and this is amazing. My whole office is Hulk. I can prove it lol
Ok, I have to be that guy: Brown pants? What happened to classic purple? 😘😘😘
@Groundeffected
Жыл бұрын
I dunno haha just a choice I made in the moment.
Amazing work, what infill do you do your models at?
@Groundeffected
Жыл бұрын
None. It’s hollow
great job but wouldn't his tongue and gums be green too?
I'm about to hand paint a Maestro model of the same size as i dont own an airbrush unfortunately. Pray for me
@Groundeffected
8 ай бұрын
Big brushes dude. Big brushes. Good luck!
Hi! Can you make some video about: How to paint realistic chrome?
@Groundeffected
Жыл бұрын
Like nmm or metalic?
@jakubcroverstransky5861
Жыл бұрын
@@Groundeffected Just how to imitate chrome.
What program do you use to design the shapes of the "image that will never be seen"? Do you just print it and trace the back of the stand on it?
Did you spray the blue and completely cover the primer?
@Groundeffected
Жыл бұрын
Mostly
Silly question can you use the black primer as a finished coat as I've sprayed the base black with primer?
@Groundeffected
Жыл бұрын
Yea of course if you are happy with the colour then there isn’t anything wrong with that
@chriscrowder3844
Жыл бұрын
@@Groundeffected thanks man x
great job, where is it possible to download the stl files. thank you
@Groundeffected
Жыл бұрын
If ever the files are Available they’ll be linked in the description. These ones are from 3d wicked
How long in total , from 3D printing to painting
Hi hello there how are u doing new here i just subscribed u are amazing i love it are u selling and making statues or figures for other people if u dont and if u know of someone who does that please let me know i just hope they are as amazing the way u are wow i need so many figures that i want to have 😃🙏✌️👍
Anyone know where I can get this STL? Does he have these STL on his patrons page?
@Groundeffected
3 ай бұрын
Dude please read the description. I even mention it in the video too.
is it possible to find the stl file of this the model
@Groundeffected
Жыл бұрын
Link for the sculptors is in the description dude
How much resin did it take to print this piece?
@Groundeffected
6 ай бұрын
Um I think about 2 litres
@dub1309
6 ай бұрын
@@Groundeffected Thanks man! New subscriber...Love your work!
Is this a 3d printed ? If it is when to buy the file?
@Groundeffected
Жыл бұрын
Link in description
Los Increíbles Violeta Dash Elastiger
Did you mask off the black on the Hulk symbol before you airbrush (1:44 time frame)...
@Groundeffected
Жыл бұрын
Nope. Ink over black looks mostly still black so I didn’t need to make that
@gjohnson5978
Жыл бұрын
So you painted then put clear resin over it
@Groundeffected
Жыл бұрын
@@gjohnson5978 no I painted it a then painted clear gloss paint on it
First
Do you sell ?
So I fucked up and don’t have air brush and tried to paint purple on black the green on top of that and those 17ml bottles don’t go far on a 100 percent hulk
@Groundeffected
Жыл бұрын
Ooof. Tough but of school fees paid. Did you thin it down?
@god1aj
Жыл бұрын
@@Groundeffected I did but not enough. I should have sprayed white on top of black coat I think but I wanted to be just like you but without an airbrush. Lol
@god1aj
Жыл бұрын
Also, I think my brush dried out quick and instead of wetting it again, I just kept trying to paint. Took about 4 hours to get it to finally look green and the purple/black covered
Words
Ficou muito bom...Ficaria legal se você tivesse borrifado um pouco de verde nos dentes e na lingua dele.
yes a SMASH of a model just fun see and not WINNYGWinny sight but house of mouse might say some thing but well we do not give a BLLEEPP And cant whagt telllthe new one you SMASH it out the BALL park yes have do the hulk sound efet off well hulk frome film and TV see you nest vid
Boring fact - from the moment we're born all through life our eyes are the same size, thus hulk seeming to have small eyes compared to his overall stature. Said it was boring. Lol.
@Groundeffected
Жыл бұрын
Hahaha 🤣 you crack me up.
get that like into ya, ya khant! also please for the love of the flying spaghetti monster in the sky, sort your online store out, literally just add a category for paints and it will be way easier to navigate
@Groundeffected
Жыл бұрын
I’m working on it. It wasn’t goi b to be a store until recently and then so much stuff happened and progress slowed a lot
@evancleary3315
Жыл бұрын
@@Groundeffected fair, I'm still going to keep annoying you about it though, so fair warning
Do you think I can get the same affect with blue Speedpaint? @Groundeffected
@Groundeffected
10 ай бұрын
Give it go I don’t see why not
Painting only for advertising Lays ..... Bad, dis
Lol, you are so charming. New subscribe
@Groundeffected
10 ай бұрын
Thank you
Amazing
Amazing. Love the the tone of the Green
@Groundeffected
Жыл бұрын
Thank you my dude.
First
@Groundeffected
Жыл бұрын
Not on my screen
@hicontrast
Жыл бұрын
@@Groundeffected liar