This printer looks amazing. Can't wait to upgrade from my ender 3 v2 one day. But for now I love my Ender

Going that fast, the bridging should be impressive. Could you do some tests to see how far you can bridge before it fails?

No freaking way ! ARE YOU KIDDING ME ?1 THIS PRINTER IS INSANE ... SEEMS IMPOSIBLE TO MOVE THAT FAST AND PRINT WITH SUCH QUALITY.

We just got one at work. The speed is mind blowing next to our mark forged printer.

Quiet printing is nice....but for everything else the machine offers, I can easily ignore the noise.

This printer is deep ensconced on my 'I want list' (I do NOT NEED it but I want it!)

This is a great review! Thanks for putting this together.

Thanks. I’ve got one on order at $1500 US. I bought the AMS to use an easily removable support material. You covered things that I hadn’t seen before, and I always like seeing cats.

Best channel ever !!

Great video...Thank you I can't wait for mine!

Very good review. Thanks!

I'm pretty sure the RRP for the X1 non carbon with no ams is $999

@Minionbro360

Жыл бұрын

That’s a really good price for what you’re getting

When looking at a printer printing makes you gigle like a child 1:19 it is a great printer

Excellent review.

gonna be honest here, I really just adore your voice

Great video and your English is fantastic

10:58 Wait, so you put in fresh filament to get better results. What was bad with the old filament? You said something but I couldn't make it out.

Can't wait for the screw compressor video 😂

07:30 Ludicrous speed. The designers had a sense of humor.

Hahahah I just was one year in Estonia and I thought at the start of the video wow you sound so Estonian. Than I saw the Estonian flag and new what was going on

Printer go *BRRRRRRRRRR!*

I don't like close source printers at all, but it looks really good

Pretty impressive printer, dude! 😮 Fantastic review!!! But it should cost a kidney. 😬 Anyway, stay safe there with your family! 🖖😊

that comment @ 2:22

Wow - this is very impressive. The price is high, but it seems appropriate with this level of performance. Great review. I would have liked to see you print your silver colored pump housing (you had shown it in this video) with the same material on the printer in Ludicrous mode.

The trick to say it with that accent is Ludy cruss

Can you please test the noise level on quiet mode.

That 🐱 looks cute and behave.. but i just look at their website.. need preorder.. price 1449 usd

And its only 1250 USD? wow thats a great deal

@theglowcloud2215

Жыл бұрын

Same price as a Prusa i3 MK3S assembled model, after Prusa's recent (and large) price increase😂

Hi, can it print 4 colours from AMS and 1 color from rear spool holder, so total 5 colours at one print?

@yathani

Жыл бұрын

Not possible because the AMS is doing the work for pulling and feeding the filament. Also there is one ptfe tube coming out of the AMS to the buffer thus you can't insert other tube.

I just went on the Bambu Lab page. I was laughed off the page for asking some questions about price, is this actually coming out. After being laughed at on the official page hell will freeze right over before I buy their printer.

@BeefIngot

Жыл бұрын

What are you talking about????

What Im suspecting is the material melted at a much higher temperature, it is handled at a much lower viscosity than conventional extruder, thus can be dispensed at much higher speed with better precision. This is most likely theory behind the tech. Im interested in put this against very expansive ultimaker.

@TheRobojay

Жыл бұрын

Actually, the reason it can print this fast is the long melt zone. It prints PLA at 220C. The volumetric speed is not as high as most think either. But it allows for fast speeds with a 0.4mm nozzle with normal layer height.

Looks like a company that actually did their homework..

@dsp4392

Жыл бұрын

This company was created by many engineers who worked at DJI before (the drone company). That's why a lot of it is so good.

@TheJttv

Жыл бұрын

@@dsp4392 having a impressive resume does not guarantee results.

You should take your cats to get a haircut that makes them look like male lions! Saw one in a video today and it looked awesome. Even the tail had a haircut except the tip. Just like a mini lion! It's summer and they must be hot.

MY ORDER IS IN

11:00 lol no you cant, print something half the firstlayersize of the vase with 3-4 perimers and 30% infill. -.-"

This printer be like, I am speed

Принтер хорош

What would be the price of such a printer ?

@henninghoefer

Жыл бұрын

The X1 Carbon with the AMS will be 1449 US$. The X1 Carbon alone will be 1199 US$. The X1 will be 999 US$.

Hey I’m in a project that takes plastic water bottles, and turns them into filament it’s called Recreator3D and have a discord as well. I’m reaching out in behalf of josh the owner. How would you like to partner with us and create some pumps from recycled plastic?

is it precise enough to print multi-colored LEGO compatible elements? only those that are not copyrighted anymore, of course. Edit: as the change of color takes time it might make sense to print at an angle so that color changes mostly between layers, instead of within a layer.

were was this printer a year ago

@henninghoefer

Жыл бұрын

in development 😄

thanks bro i want to buy 3d printer plz sugest me best budget 3D printer plz plz

@catfisherboy

Жыл бұрын

Anycubic Vyper

@dsp4392

Жыл бұрын

Best budget printer right now is the Anycubic Kobra

@Minionbro360

Жыл бұрын

Anycubic Vyper, Mingda Magician X, Prusa Mini

.....and if you have money for electricity, if you live in europe :D i am dying xD

Check a video clip here on yt with the tags spaceball and Ludicrous. That’s how I learned to say it!

Using a standard slicer disables the special capabilities of the printer. Not recommend currently.

pքɾօʍօʂʍ ⭐