Uzbekcha gapirib video oling 😊

@ariandiez9837

8 ай бұрын

🎉

@Ziyodjonmirzo

7 ай бұрын

You tube inlizcha content uchun kóproq tólaydi

@7_kings_forever.

4 ай бұрын

Ha 1 ta vid holos kantentdanam kora Uzbdwgila hursand bolardi​@@Ziyodjonmirzo

@ABU_234

4 ай бұрын

Ha

Good luck Hello from uzbekistan🎉🎉 Aka juda zòr OMAD

@KONBOU_

9 ай бұрын

Ozbek boribdiyu😂

@yosh_bloger2008

9 ай бұрын

Oʻzbek ekan😅

@Zafarjontv300soon

9 ай бұрын

O‘zbek sila

@dayaprajapati1177

8 ай бұрын

😊❤

@arofathonizrailova8834

4 ай бұрын

Bu oka ozi ozbek bilmisizmi😂❤

O'ZBEK SILA 🇺🇿🇺🇿🇺🇿🇺🇿🇺🇿🇺🇿🇺🇿

@user-gg7yt8kn2l

7 күн бұрын

Г3шшуло764❤❤

3D printed things + real thread = 3D printed YoYo 🫨🫨🫨🥴🥴🥴

@Duongpppp

9 ай бұрын

And reel bolts too💀

@Marco_dragon

14 күн бұрын

yoyo string are made out of polyester 3d printed ones are almost impossible to make, be realistic bro, also use real yoyo terms it's string not thread as a yoyoer I'm kinda annoyed.

@Marco_dragon

14 күн бұрын

​@@Duongppppthat bolt doesn't have to be there, it's for the weight of the rim or else the yoyo won't spin, he can use a heavier filament for the rim of the yoyo and doesn't have to use bolt.

Use some response pads to make the 3d printed yoyo more responsive.

Judayam zoʻr omad 😊

@olloyorovgilomjon

8 ай бұрын

O'zbek bu

Nahh him calling a $2 responsive yoyo "real" is crazzzzzzzzzzzzzzy

@pennyrq9454

Ай бұрын

fr

🇺🇿

As a very knowledgeable yoyoer, I would say that you probably need some rubber response pads in there for it to perform properly. But looks, 10/10

@zealjain3605

3 ай бұрын

Also a actual ball bearing. The one in vid is 3d printed. Btw I am also a good yoyoer

@Cplayz08

3 ай бұрын

@@zealjain3605 what’s your favorite yoyo? Mine is probably the yoyofactory atlas

@FIRENAANS810

2 ай бұрын

Even me

@FIRENAANS810

2 ай бұрын

It could be an unresponsive yoyo??

@Cplayz08

2 ай бұрын

@@zealjain3605 Yea, that would probably help. I didn't catch that it was printed, nice job

AKA REAL GM BILAN 3D GM YASAB KURING😂😂😂

Bu aka oʻzbekistonlikni uzbeksilaa ❤❤❤❤❤

Love form bangladesh 🇧🇩❤️❤️♥️🇧🇩💔

Yo-yo science has already been dialed in bud, you can’t just chuck some nuts in there and expect it to perform well

@Marco_dragon

14 күн бұрын

It did perform better than without nuts because yoyos are more long spinning and more stable with more weight on the rim

@Marco_dragon

14 күн бұрын

The problem is the real yoyo uses a ball bearing inside that's why it spins longer, btw I'm a yoyoer that's why I know these stuff

Making a yoyo but not knowing how to bind a non responsive yoyo

@Pio2DMax14

4 ай бұрын

ikr he put an unresponsive bearing in it

@zealjain3605

3 ай бұрын

​@@Pio2DMax14Bro he used a plastic 3d printed ball bearing

@Marco_dragon

14 күн бұрын

He's literally comparing it to a responsive yoyo and what do you expect from a 3d printer guy, horizontal 5.0 hook?

use the trick called bind on the 3d printed yoyo and it should retract

When you say let find out I love it

Sweety Planet one was an unresponsive Yo-Yo

Hey the reason why it did not come back up is because you put a wide bearing instead of a flat bearing

he also put an unresponsive bearing in it

Amazing

Gotta love yoyo stuff

POV: parents who will do anything to save money💀

That’s not technically fair since there were two different types of yo-yo

3d printer life vs real life

Now you have to do a trick called the bind

Sleeper time ❌️sleep time✅️

But you can keep printing them until you make a better one!

3d Printed Bro vs Real Bro

Uzbekistan’s duppi, I respect you bro 🔥🔥🔥

What 3d printer do u use

3d printed human vs real human💀

Yeah bud those serrated pads surrounding the bearing are not good As someone who had one of my yoyos arrive with a scratch around the inside of the yoyo, I can tell you that it cut my spin time in half. I think the reason it’s not responding is cause instead of the string wrapping around the bearing, it’s getting snagged on that response pad and not doing anything Or you somehow made a 3D printed non responsive bearing idk

Please make 3d printed automatic Nerf gun

Does not realize 3d printed was unresponsive💀💀💀

Ever Heard of an unresponsive yoyo

Bro like a NPC😂

Does he realize he created an unresponsive yoyo

But holdon, I think the 3d printed one is also real, I can see it on your hands

It depends on the response system

@zealjain3605

2 ай бұрын

And also on using an actual bearing ant a 3d printed one

@Aivony643

2 ай бұрын

My friend has a 3d printed one and its so much better than that plastic crappy dollar store yoyo

That is unresponsive. You need a bind to bring it back up

what you got from the 3d printed is an unresponsive yoyo, the real was responsive

The legendary line 'Let's find out'.

FERFECT I AM FROM UZBEKISTAN

great. now compare it to an aluminum high a grade yoyo with stainless steel rings. unresponsive 10 ball concave bearing with high grade response pads

No fake win he is no responsive

Quando você acha que ele já fez de tudo na impressora 3D: No próximo vídeo... Casa feita na impressora 3D VS Casa real

No the 3d print was unresponsive that's y it did not come back, you just have to bind it

@engineericly

5 ай бұрын

Yeah, I could not make it come back, it was so hard

Whats up Stan?

u want an unresponsive yoyo lil bro and u only got it cuz the concave bearing

Are you uzbek?❤

Next is a 3d printed Ohio vs real Ohio💀💀💀

@len_pisat_nik

9 ай бұрын

💀

@bh24x

5 ай бұрын

We don't need any more Ohio!

Next time print it and 0.1 layer hieght with 6 walls it will come out alot better I promise

3d printer wife vs real wife which one is a better lets find out😂😂

3d print did not back because it's unresponsive

You bought the worst yoyo to compare it with

Омадизи берсин углим

Bro real katana vs 3d printed katana pla pls

3d printet yoyo wins becuse the unresponsive bearing never comeback to your hand but you do the bind trick comeback to your hand

Bro red yoyo stole from me

O‘zi bilardim o‘zbek ekanligingizni sezgandim😂😂😂🎉

@7_kings_forever.

4 ай бұрын

Da menam

@7_kings_forever.

4 ай бұрын

Sizdan teparodegiga ozbecha yozodikan ozbecjha atvet qib yozibdiRahmat deb❤

Good job bro Hello from Uzbekistan❤

Or you can just do a bind💀

dude did it completely illogically

every time I see his video I wonder what the hell he's doing

Bro really put a unresponsive yoyo bearing💀

This name yoyo and yoyo cartoon girl From Trevor Henderson Have their same name?

I have some fantastic 3d printed yoyos the design is key

Something's not right around here

It's not a true yoyo

hid did something wrong with the 3d printed yoyo. he put an unresponsive bearing instead of a responsive bearing. when he puts the unresponsive bearing it means that it wont come back up anymore unless you do an espisific trick called a bind. it alsso needs response pads

@Marco_dragon

14 күн бұрын

The bearing is literally 3d printed

@Marco_dragon

14 күн бұрын

And no he doesn't need response pads those response teeth are more responsive than response pads

These videos drive me crazy because the 3d printed version isn't necessarily meant to be better. It'll also almost always be worse. The beauty of 3d printing is that you can get 95% of the performance of something but be able to make it in your own home for pennies

Bruh the 3d pronted one is a non responsive yoyo you cany just tug it up theres a spesial bind for it

I think it lost because it’s unresponsive, yo-yo

3D printed Arrow and bow

3d printed is just unresponsive I think

Yoyo yaa Oyo

Qachon 3d yutib chiqadi When 3d printer win

Very good video siz Uzbekistonnansizmi are you from uzb

Astonished Good luck

That is a unresponsive yoyo

I think put a bearing

I ❤ YOYO

Peonza test pls❤❤

Are you from uzbekistan?

yo made it a unresponsive yoyo

@Marco_dragon

14 күн бұрын

He testing it against a responsive yoyo

The. Reason why the yo-yo is not going back up is because you have a unresponsive bearing so 3-D printed wins

That yoyo in the video is one of the most crappy I have ever seen

Do a ball please❤

But real is responsive while 3d printed is unresponsive…

@tihc1

7 ай бұрын

It was intended to be responsive though, and it can’t bind (most likely) like an unresponsive couod

Phonecase niyam shunaqa solishtirin omad💥🔥

I yhink it is a unresponsive yoyo .u need to learn to bind it

bro do skates

Bro thinks he is from another planet

Aka dòpiga malades ÒZBEKEKANSILAR🇺🇿🇺🇿🇺🇿🇺🇿🇺🇿🇺🇿🇺🇿🇺🇿🇺🇿🇺🇿

Hi bro good video. Salom oka yaxshi video. Uzbekcha video oling oka

Vaee doppizdan❤😂

You are Uzbek❤❤❤

What filament brand do you use for your bambu lab printer?

Я один догадался то что он не из Америки а походу он из Казахстана

but the best is yo yo honey singh