3D printed RC tank - guest project by Slowshop & Custom
Автокөліктер мен көлік құралдары
I had some trouble with the video material this time - sorry for the "Media offline" frames
Some of you might have seen it on Instagram or on Shorts here on KZread, but here we have the Jagdpanther built by Martin from Slowshop & Custom. It's a fully 3D-printed RC-tank. The files are available at Cults3D and the creator is Kaja18. It's a beautiful model, very detailed and Martin had a blast building it. Since Slowshop & Custom is a channel more focused on real terrain vehicles, Land Rovers and crawlers, Martin asked me if I wanted to host the video on my channel.
Check out Slowshop & Customs here:
youtube.com/@slowshop?si=d6jM...
Check out more models from Kaja18 here:
cults3d.com/en/3d-model/art/j...
Пікірлер: 179
Ngl, i also gotta print one out when im done with my current rc project
@builtbyWikander
Жыл бұрын
Sounds good! It's so cool that you can make a pretty large rc tank with just a little knowledge and a decent printer.
You have done a fantastic job. 👏👏
@slowshop
Жыл бұрын
Thank you sir! 👌
Very cool. Thanks for sharing this.
@Hagbergscorner
5 ай бұрын
Anytime! 👌
very beautiful realization bravo!
@slowshop
Жыл бұрын
Thank you! 👌
very nice video about the construction. It looks great. And thanks😊
@slowshop
Жыл бұрын
Thank you sir! 👌
Awsome stuff, great edit and driving video at end
@Hagbergscorner
7 ай бұрын
Thank you sir! ❤
Just amazing! awesome project!!
@builtbyWikander
Жыл бұрын
Thank you!
@slowshop
Жыл бұрын
Thank you! 😉
Cool build, nice video. Thanks.
@slowshop
Жыл бұрын
Thank you sir!
I'm currently making the panther G model Kaja made, but this video does such a good job showing more in depth how to assemble the lower hull and the gearbox which I'm very thankful for. Love your content!
@builtbyWikander
4 ай бұрын
That's aweseome, best of luck with your build!
@Hagbergscorner
2 ай бұрын
Thank you! 👌
Wow, ser fram emot att få se nästa tank😁
Amazing iloce rc tank and 3d print nice job
@slowshop
Жыл бұрын
Thank you!
Riktigt Snygg projekt fungerar själv på något liknande 👍
Great job 👍🏽
@slowshop
Жыл бұрын
Thank you! 👌
A DREAMWORK😊
you definitely do some amazing work
@builtbyWikander
Жыл бұрын
Thanks a lot!
@slowshop
Жыл бұрын
Thank you! 😉
I like this format where you do guest builder video. I know more work for you, but really enjoy seeing others' builds, esp in that side of world. Your vids are always excellent quality!
@builtbyWikander
Жыл бұрын
Thanks, man! Valuable feedback.👍 I also thought that this - making your own large scale 3D-printed tank with bought files - would make a nice compliment to my own scratch builds. Nice to hear it was appreciated! Martin provided me with great video material, so a lot easier than making my own build videos. 😊
@robertmorey4104
Жыл бұрын
Yes I bought the file but haven't seen one made. Nice to see some details, esp gear box. Thanks!
@slowshop
Жыл бұрын
@@robertmorey4104 Glad we could give a virtual kick in the rear to build your own. 😂
OMG perfect opening
@builtbyWikander
5 ай бұрын
😁 Thanks!
Cool 😊
Great looking model. I just ordered the Kaja18 Panzer IV files to print. For sure I'll print the small details using my resin printer instead of FDM.
@builtbyWikander
Жыл бұрын
Awesome! Sounds like a great idea, best of luck with your build!
Very nice
Superb model, heck of a lot of printing, must have taken a long time. 👍👍👍👍👍
@slowshop
Жыл бұрын
Thank you sir! It took 5 weeks with two 3d-printers going almost 24/7.
@fredblogs
Жыл бұрын
@@slowshop wow that IS a lot of printing. But well worth it.
Your friend did an amazing job on his 3D Beast! He shared it on the best place on KZread, your channel. Thanks for sharing it with everyone.
@builtbyWikander
10 ай бұрын
Thanks for the kind words! And yes, I agree, he did a great job. It ran completely without problem during our last meet.
@slowshop
10 ай бұрын
Thank you sir.
Damn it legit looks like an Afrika Korps Jagdpanther!
@slowshop
10 ай бұрын
Thank you sir! ❤
Eres un genio enhorabuena por el modelo tienes una bonita colección. Enhorabuena 1 like 👍 Un saludo
@slowshop
Жыл бұрын
Thank you sir! 👌
Förhelvette Erik. Super great job 😃👍
@builtbyWikander
Жыл бұрын
Tack Klaus! Ses i september!
@slowshop
Жыл бұрын
Tack Klaus! 😉
Excellent ;)
@slowshop
Жыл бұрын
Thank you 👌
Very nice build!! So the Cults3d files includes everything to build the tanks he has, minus the electronics of course. I really want to build after watching you for about a year or so. I know there’s kits out there but smaller scale. These 1/10th tanks are awesomely massive. Thanks for info!
@builtbyWikander
Жыл бұрын
Correct! I also think it includes instructions to what hardware and motors you need.
@slowshop
Жыл бұрын
Thank you! The manual is very informative and states everything you need, nuts, bolts, motors, servos, drive belts, ball bearings etc. The manual says 20T motors but I went with 55T instead. Its a fairly easy model to build. 👌
Cool Jagdpanther kompis
@slowshop
Жыл бұрын
Tackar! 👌😉😊
I enjoyed this video because model is fantastic. Currently I'm also creating a 3D printed model of GAZ71 in 1/10 scale
@slowshop
Жыл бұрын
Thank you! Let us know where we can get files for the GAZ when you're ready. 😊
Impressive as Always. Nice format btw. Keep doing cool stuff man! Greetings grom France. Your french mate ! 😁🇨🇵
@slowshop
Жыл бұрын
Viva la France! You are going to love my next build. 😉
@builtbyWikander
Жыл бұрын
Thanks for watching! 🇫🇷
Thats a very good idea to make spacing between the gears and use belt to turn them👍by doing it like that u wont have much if any ware to the gears over time. Because i dont think the rubber belts r going to effect the plaste gears. Supper cool video and build
@slowshop
10 ай бұрын
I've been driven a couple of charges now and the belt wheels still looks like new. 👌
he's such a funny man I like it
@builtbyWikander
Жыл бұрын
He is! 😄
Made a rc 3D printed TOG II* this year at 1/16 th scale. It’s almost a meter long
@builtbyWikander
3 ай бұрын
Awesome! Imagine that in 1/6! 😄😄😄
great built!! I have the files too, but they have to wait a bit as I am printing a SU-122 in 1/10. But tanks in this scale are quite big :D cool video again
@builtbyWikander
Жыл бұрын
They are! And it's so cool that you can do it yourself now. 💪 Good luck with your prints!
@slowshop
Жыл бұрын
Thank you! I'd love to see the SU-122
What an amazing model! 😊 Those bearings are cute; what sort are those? I only know about the big bulky skate-type bearings
@slowshop
8 ай бұрын
Thank you Lord. 😊 You can buy ball-bearing by size. It's inner diameter, outer diameter and width. Ex: 24x46x11.
That’s very cool, I wish I had the skill of 3d printing, excellent stuff, and your stuff is great too! Do I see a centurion on the bench 😊
@builtbyWikander
Жыл бұрын
Yeah, this is so cool! If you have the interest, I highly recommend investing in a 3D-printer. You don't need to know any CAD when the files are available, as in this case. Yes, it is a Cent, or Strv 105, that is coming together. 😊
@mrtankalotrctankschannel
Жыл бұрын
@@builtbyWikander beautiful 👍👍
Hello again, I gather there are some changes to this video and the parts that are to be printed, example at 14minutes 6 seconds in this video you are able to put your fingers in through the hatch and turn the mesh cover. this is not possible in the final print and also the mesh cover is different ?
@Hagbergscorner
5 ай бұрын
Yes, I've done some modifications. The mesh is an aluminium net I found at an auto supply. 👌
Make a 3d printed comander that has the right skale for your hatch then put a motor on it and with a puch of a button the comander pops the hatch and comes up
This is awesome! 😎 Could you also give a link for that 3D printer please? Just found my next project😀 Are the bolts, screws, pulleys etc. supplied as part of the manual with links to buy?
@builtbyWikander
Жыл бұрын
Hi! The printer is an Anycubic Cobra Neo. As for the model, you have to get the hardware yourself, but it is listed in the manual what things you need. Thanks for watching!
Would you be able to do a tutorial on modeling a track shoe and a sprocket on FreeCAD?
@builtbyWikander
Жыл бұрын
Yeah, I have actually thought about that🙂
Great works 👍 , i wish someday you make 1/10 King Tiger or Jagdtiger
@slowshop
Жыл бұрын
I'm currently working on another German JagdPanzer now. Video is coming in the future. 😊
@stevenharsono9911
Жыл бұрын
@@slowshopthats great , is it Jagdpanzer IV in 1/10 ?
@slowshop
Жыл бұрын
@@stevenharsono9911 it sure is! 😉
Really nice project, what motors and controller could I use?
@Hagbergscorner
2 ай бұрын
Aloha! In this JagdPanther I used 540 55T motors and Hobbywing 60A esc.
@shiro_v1424
2 ай бұрын
@@Hagbergscorner thanks I'm looking to print my own model
@Hagbergscorner
2 ай бұрын
@@shiro_v1424 Have fun. It's a beautiful model and easy to print. 👌 What size printer do you have?
If it was 9 tenths bigger, It'll be a tiny older me
What was the brand and color that you sprayed the tank hull at the 8:30 mark? Thanks.
@Hagbergscorner
5 ай бұрын
That is Fosco dunkelgelb. Thanks for watching. 👌
What battery type are using and would recommend, Lopo or nicadd? I’ve almost finished printing my tank (maybe 100 0r so hours to go) and would like to know what you generally use?
@Hagbergscorner
2 ай бұрын
I'm remaking old power tool batteries. I have a video on my channel of how I build them.
@chriswaldron2617
2 ай бұрын
@@Hagbergscornerthanks for the reply 👍
@Hagbergscorner
2 ай бұрын
@@chriswaldron2617 Any time. 👍
What printer did you use how long did it take you to print it and last how much did it cost ???????
@slowshop
8 ай бұрын
Aloha! I have a Flashforge Adventurer 4 and an Anycubic Kobra Neo, which both worked almost 24/7 printing parts. It took 5 weeks to make it a complete functional tank. I used ca 7 kilo filament. I'm not sure how much it cost, but around 500-600 € with everything. Thank you for watching. 👌
What for layer height are you printing at? Can you please share a peak preview of the Jagdpanzer? Great models keep up the great work.
@slowshop
8 ай бұрын
Thank you. I have 0.1-0.12 on details and 0.16-0.18 on other things (Hull for example) JagdPanzer IV is on its way. 👌 Coming on the Wikander channel.
@dutchtank1980
8 ай бұрын
I use also esun pla+ what’s your print temp?
@slowshop
8 ай бұрын
@dutchtank1980 Nozzle 210°C and 50°C on the build plate. I've since that lower the nozzle temp a little and it still prints fine. 👌
@dutchtank1980
8 ай бұрын
And how do you smooth the layer lines? Sanding or with putty?
@slowshop
8 ай бұрын
@dutchtank1980 Both. Sant, putty, sand. 😄
I have a couple of questions please, I am unable to work out what a "10x Classic mother" is or for that matter what "M3 - Mother 60x Classic" are and when I try and buy the motor drive belts they ask what length are the belts so so info on these items would be very much appreaciated. Other than these questions I am very impressed with the build quality. Cheers
@Hagbergscorner
7 ай бұрын
Classic mother is just a regular nut. 😉 My manual says the exact length of the belts. I have a spare kit at home so I'll check tonight.
@Hagbergscorner
7 ай бұрын
The belts are 2 60XL037 and 4 70XL037 for a complete set.
@hawkeyed77
6 ай бұрын
Thank you @@Hagbergscorner
Du bist der Panzer Zauberer von OZ😊
@Hagbergscorner
5 ай бұрын
Vielen dank. 😊
With the tank seeing lots of UV light, would you print it all in PETG? Asking as I’m about to buy a 3D printer just so I can make this.
@builtbyWikander
Жыл бұрын
Hi! PLA is sensitive to heat and sun, so I'm trying to be careful when outside and keep the models in the shade when not driving. Best would probably be ASA, but it's more demanding to print. So far it works great, and I'm guessing that almost-solid track links is pretty sturdy, even in PLA+. PETG would also work, I'm sure. It's a bit more flexible and squeaky than PLA+.
Not the Anycubic, no. But your work is super. Respectly.
@Hagbergscorner
6 ай бұрын
The Anycubic worked great all along this project. 👌
@sebbi2018
6 ай бұрын
OK, when it is so. You be a good worker.
@sebbi2018
6 ай бұрын
Im building now a Leopard 2a4 in Scale 1:8 from Bauplan Master with materials: Urbanmaker PLA 120, ASA, PC and alu. Do you can give me some Tipps for gear components? Im the last from actually german people. Ampel Regierung goes to multi NAZI now. I can send some Pictures to you whit actually standing.
@Hagbergscorner
6 ай бұрын
@@sebbi2018 Great model. 👌 I think you can fit two power drills in that one. Check out Built by Wikanders "How to build" -series for tips and tricks.
I have almost completed the Panther but have come across a killer problem for me my 3d printer build volume is 256x256x256 and the last parts in the HULL section 21L and 22P are just that little bit too big for my printer and both being single STL files even althogh there is five panels in the file they cannot be seperated the issue is the gaps between four of the five panels are just that little bit to wide, does any one have these in seperate or single files ? They ar the panels that cover the tracks on each side it would be much appreciated .
@builtbyWikander
6 ай бұрын
Hi, you should be able to cut any part up in the printer slicer, and then just glue them together when they are done, but I'll ping in Martin since it's his build.
@Hagbergscorner
6 ай бұрын
Aloha! I see now that the Panther and the JagdPanther don't have the same number on the hull parts. Is it the back wall or is it the engine deck? In the JagdPanther files you have a choice, there is a file for the complete part and there is a cut part with two files so you can print and glue them together. Or as Mr Wikander says, you can cut the part in the slicer. Hope this helps. 👌
Media offline :)
@builtbyWikander
Жыл бұрын
Yeah, check the info - sorry about that.
@illiaviktorovych7506
Жыл бұрын
@@builtbyWikander it's ok) just one funny moment)
hello, how do you model these pieces? Is it on fusion 360 or on another platform? and how do you make it perfect? thanks..
@builtbyWikander
Жыл бұрын
Hi, this model is built by a friend of mine and the 3d-files is bought from Kaja18 over at Cults3D.com. Not sure what he I using for software. I draw my own models in FreeCad.
Sorry to be a pain but I have not been able to find the part that allows the electric motor(s)to connect to and drive part 6 in the gears section
@Hagbergscorner
6 ай бұрын
Part 6 (belt wheel) is connected to the motor with two M3 screws and nuts. Or do you mean the PETG X-shaped thing? The part number is 8-2X PET-G and is found in the Gear section. Hope this helps. 👌
@hawkeyed77
6 ай бұрын
Thank you @@Hagbergscorner
I see where some parts are printed in PETG, but is PLA for most of the model?
@builtbyWikander
Жыл бұрын
Yeah, he used PLA+ from eSun for most parts, I think.
@slowshop
Жыл бұрын
Yep, PLA+ from esun in everything except for some parts in the transmissions that is PETG.
@chriswaldron2617
Жыл бұрын
@@slowshop Just the answer I was looking for. First I have to get a printer, then I can print;build this beast 👍
@slowshop
Жыл бұрын
@@chriswaldron2617 A good printer doesn't cost a fortune anymore. Have fun building, mate. 👌
Hey there, I am really trying to find an L3/33 RC Tankette but I cannot find it anywhere. Would making something like that even be possible?, since it is quite a small tank(ette)
@builtbyWikander
Жыл бұрын
That's a cool tank! Yes, I don't see why not. 🙂 A friend of mine made an awesome Universal Carrier in 1/6 scale, driven by a single 18 V electric drill and with tracks from a 1/16 Tiger. It's roughly the same size as an L3. Check out my other videos to see it in action.
Painting?😮😊
@Hagbergscorner
6 ай бұрын
Painting is done. kzread.info/dash/bejne/gpmqo5qPp8ipXdY.htmlsi=Uz3O_SFrpHlKU428
Mhh... Lots of ( IMHO ) odd choices how things were designed in this Build 🤔 ( coming from someone who designed and built his own 3D Printed Tank: kzread.info/dash/bejne/nmeTtMWIhZbgn5M.html 😁 ) @04:25 No reinforcing Screws acting as a Rebar going through the entire length of either of the 3D Printed Shafts be it the one for the Wheel or the Swing Arm itself ( also neither a Bearing or Bushing for the Swing Arm - Lets hope that Plastic on Plastic Action isn't going to haunt him some day 😏 ) @05:40 Kinda a missed opportunity with the upper and lower frontal Armor Plates to having the typical teethed/interlocking Box Joint design. @08:30 As with the Axles - I'd be having serious trust issues with only that flimsy 3D Printed Pin in the Side Walls holding onto that Suspension Rubber Band without it snapping - I'd also argue for Springs to be a better Longterm solution in general. Less of a Technical Gripe and more of a Dedication related one is the lack of any Surface Structuring ( imgur.com/hzUu2tB )... Would it be a bitch at that size? Hell yes, it totally would. But at the same time if you've gone through all the effort why not go a _little_ further by doing it adding SO MUCH more to the looks of the Model.
@slowshop
Жыл бұрын
There are some questionable choices in the design but overall it's really good. The hooks comming out of the sides that holds the rubber band is one of those. The swing arms are strong enough. This is a very lightweight model. 😉
Здравствуйте, отличные модели танков. В какой программе создаете 3д модели?
@builtbyWikander
5 ай бұрын
Hi, this model is made by a friend of mine. He bought the 3D-files from Cults 3D, link in description. I use FreeCad when I design my models.
Please somebody make 1/10 scale RC tanks as a viable but still fairly affordable option to 1/16 RC tanks ! PLEASE 🙏
@builtbyWikander
8 ай бұрын
If you have a 3D-printer, you have exactly that right here. 🙂
The links in the description dont work. Do you have link to your friends channel please?
@builtbyWikander
9 ай бұрын
Sorry, it should work now! Thanks for watching!
@tamasdohy1146
9 ай бұрын
@@builtbyWikander sorry still not :-(
@builtbyWikander
9 ай бұрын
@@tamasdohy1146 Really? It works for me now, on two phones... but do a search for Slowshop & Custom and you should find him!
@tamasdohy1146
9 ай бұрын
@@builtbyWikander thank you!
What is the estimated print time?
@slowshop
10 ай бұрын
I have 2 printers, and all was printed in 5 weeks. I use 0.1 layer height on details and 0.14-0.18 on the other parts. 👌
How much 3D print cost?
@Hagbergscorner
5 ай бұрын
The stl files is ~$20 and I think it takes 6-8 kilos of filament. Even with the 3d-printer itself I'm still under $1000 including everything.
Hello. I want to buy M48A3 in 1/16 scale
Cult's page not working
@builtbyWikander
7 ай бұрын
Thank you, it should be fixed now!
A resin printer is better for prints with small details as your filament printer. But very nice model
Битая ссылка
I was looking into doing this but the author took down all of their models... What gives!??
@builtbyWikander
3 ай бұрын
Hi, apparently he had to take his work down. Hopefully it will be back again.
@3nigma.3nc
3 ай бұрын
@@builtbyWikander Was there any reason why? I been looking at this for awhile and was literally about to pull the trigger on buying the files and then it's gone.. That really bites.
@Hagbergscorner
2 ай бұрын
All the models are now back. 👌
10:54
@slowshop
Жыл бұрын
Haha! No it's just a commercial on KZread. 😂
@pussyslayer2295
Жыл бұрын
@@slowshop ah i see, great work btw👍
@slowshop
Жыл бұрын
Thank you @Pussy slayer