Do You Have A Mouse Problem? I invented The World's Greatest Mouse Trap - The Dizzy Dunker Purchase on Amazon: amzn.to/3Py9eDF Purchase Directly from the Rinne Website: www.rinnecorp.com/?ref=shawnwoods1 (As an Amazon Associate I earn from qualifying purchases.) FTC Affiliate Disclaimer - I get commissions for purchases made through links in this post. For A List Of My Top Mouse Traps Recommendations Check Out My Online Affiliate Store: www.amazon.com/shop/historichunter (As an Amazon Associate I earn from qualifying purchases.).

Shawn is so awesome. Instead of just writing it off as "not effective" he offers critique and even demonstrates improvements. Genuinely constructive criticism.

@markfryer9880

6 жыл бұрын

Well to be fair Marcus has contributed quite a bit in the way of 3D printed traps for Shawn to use and for us to ah, shall we say, enjoy.

@jenniferwhitewolf3784

6 жыл бұрын

Viewer participation.. sure is neat how the test and improvement process goes... Thanks👍🙋🙋🙋 to both Sean and Marcus..

@chrisbogan6519

5 жыл бұрын

MiG-21bis Fishbed-L that spike idea wasnt an improvement. Not every pest needs to die like a character in a horror movie so i give this no stars and under a 0 rating

@Goldenkitten1

5 жыл бұрын

@@chrisbogan6519 How was it not an improvement? The original version didn't work, it was too weak to hold the rodent in place. I understand you didn't like seeing the animal killed but regardless of personal feelings it was 100% an improvement. The only other possible thing that you could probably make the guillotine stronger to hold the creature in place as a possibly live catch alternative, but between the pressure and tiring themselves out trying to escape it'd likely be pretty fatal in itself and if not dead a whole lot more traumatic for the animal.

The rat became smart and sent a squirrel in his place to test the trap for him.

@raymondo162

6 жыл бұрын

LOL

@Lock_LoadedOR

4 жыл бұрын

That's an sacrifice I suspect that rat is a physacopath

@user-ky2vl2wm3j

3 жыл бұрын

Even rats are becoming smart in this world full of dumb humans.

While Shawn is asleep; that rat studies the traps in the studio.

@alineharam

6 жыл бұрын

Maybe Shawn should shut off the wifi in his place; the rats might be using the internet to review his channel for ideas.

@kl3nd4thu

5 жыл бұрын

Shawn just needs to bring that pinwheel one that is attached to the water filled trash can. That trap is a BEAST.

@arcticfoxguy

4 жыл бұрын

I’m picturing a rat with a fuckin’ clipboard and safety glasses in my mind as I read this

@CETravelGames

4 жыл бұрын

@@arcticfoxguy yes

bruh that aint no rat trap, its a Saw Trap

@brak_bhama

6 жыл бұрын

But it’s for a squirrel that goes REEEEEEE

@hasdfeqwaasdasdas

6 жыл бұрын

Saw trap for rats.

@zebranugget649

6 жыл бұрын

lol

@isabelhughes8748

6 жыл бұрын

Timothy Magsino watch the other version. That poor squirrel......

@astraldesires

5 жыл бұрын

3picGuy87 it did go ree

Damn that squirrel squealed like a piglet when it got caught

@fidelcatsro6948

6 жыл бұрын

so sad it was a squirrel that paid the price instead of the rat!

@merlinmagnus873

6 жыл бұрын

Rabbits make that same sound when my python gets a hold of them.

@SpiritofPoison

6 жыл бұрын

Merlin Magnus bro same! what kinda python do you have? I have a albino purple phase reticulated python she’s one beautiful girl.

@merlinmagnus873

6 жыл бұрын

God Eater She's a burmese python. All 13 feet and 85 pounds of lovable reptile.

@SpiritofPoison

6 жыл бұрын

Merlin Magnus nice I’ve always preferred retics. What morph is she?

That unlisted video is brutal :O

@xaviansherwood625

6 жыл бұрын

caltal2 how do you get to it??

@raeangel69

6 жыл бұрын

xavian sherwood link in description

@raeangel69

6 жыл бұрын

caltal2 ikr

@solidhyrax

6 жыл бұрын

xavian, click the link in the description.

@solidhyrax

6 жыл бұрын

There are only 3 links in the description, man, don't be a potato.

You really nailed that squirrel!

@scrawnchycat1099

6 жыл бұрын

Lol, puns

@BigBrotherMateyka

6 жыл бұрын

Oh, you're sharp.

@xyger120xbox

6 жыл бұрын

Straight and the the Point LOL

@ThreeLetters3

6 жыл бұрын

Creat pun

@xenonakhiva44

6 жыл бұрын

Lol, das a good pun!

As annoying as he is, I'm going to miss that rat once you finally get him

@ShawnWoodsMousetrapMonday

6 жыл бұрын

He will make his last appearance in my next video. The Victor electronic rat trap or as my kids call it the "Rat Toaster"

@khy8

6 жыл бұрын

Shawn Woods im excited

@TheRealNormanBates

6 жыл бұрын

For your next video, are you going to put on a leather jacket and some sunglasses and "terminate" him permanently?

@bigjai

6 жыл бұрын

Shawn Woods Rat Toaster 😂

@uglyfink

6 жыл бұрын

"Rat Toaster"...wow...now that's a must see video

Ya that extra footage was pretty brutal, you would've gotten a strike

@quancardenaz9664

4 жыл бұрын

@Pawful Cookies it's still there on the link in the bio

@thegoldenminecart1822

4 жыл бұрын

It needs more spikes to make it faster

@rancidraw

4 жыл бұрын

@@thegoldenminecart1822 the spikes arent what kill it, it chokes the rat

@RagingInsomniac

4 жыл бұрын

there was no blood or anything as far as i could tell

The plastic trigger hook looks like the plastic is already whitening from strain, might need to make it thicker in future revisions. Also, if the hook isn't meant to go all the way, it should be shortened to reduce strain on the plastic from superfluous extra leverage.

@mcdus1441

6 жыл бұрын

Its not from strain, its from left over material when printing it ( support material)

Where are the give it a lil flip shirts

@xVisuaLxEffects

6 жыл бұрын

Division 1337 Complete with silhouette of squirrel getting flipped. In the style of the new Mousetrap Monday logo.

@hasdfeqwaasdasdas

6 жыл бұрын

Zeta Darus He said shirts, moron.

@sillyt88

6 жыл бұрын

8hasdf78eqw7aasdasdas lol haaa i was wondering why the hell was he telling me that. I even went and double checked the site if he was selling shirts.I thought I might have overlooked.

@studioblackheart

6 жыл бұрын

The same place as the "Happy lil trees" shirts... I think

@xVisuaLxEffects

6 жыл бұрын

Shawn definitely referenced your comment in his new video.

You should do a collab with Joerg Sprave of the Slingshot Channel. It would be epic to see the two of you come up with some designs together.

@spencer8905

6 жыл бұрын

Bernhard Jordan yeah, lmfao

@Felisargyle

6 жыл бұрын

Bernhard Jordan lets get the rat some distance *rat launched half a mile away

@TheAdmanta

6 жыл бұрын

Oh hell yes. Sean please do this.

@SargeOfTheGuard

6 жыл бұрын

OMFGLMFAO!😆 I can see it now... A rat trapped with a Strangle Hold and launched 100 Yards into the side of that insane German's shed through several boards of Sheetrock and ending up penatrating a Foot of 10% Ballistic Gelatine before it finally hits the wall... "The Mousetrap Slingshot Monday Channel - Only on KZread!"😆

@hellawicked6184

6 жыл бұрын

Give it a big flip

you had me at sharpened spikes

Just gotta love how that Swedish guy made his trap in the colors of the Swedish national flag.

@markfryer9880

6 жыл бұрын

Sweden, taking over the World on mouse or rat trap at a time. Volvo cars, trucks and buses, and IKEA furniture were not enough.

But they can show head shots with riffles to rats and squirrels with chunks of grey matter flying but you can't trap a rat without getting the Gestapo alerted!! I don't get that 😕

@ChrisGilliamOffGrid

6 жыл бұрын

mreid08 Me neither. They deleted my channel over my trapping vids. 😡😡

@markfryer9880

6 жыл бұрын

Sadly, logic, KZread rules and regulations and Mouse Trap Monday don't play well together.

@ulfenstyle

6 жыл бұрын

The KZread owners today most likely see themselves become trapped like rats one day, and don't want to get reminded with these popular videos popping up!

@jackalope2302

6 жыл бұрын

mreid08 I think it's because real animals are dying. I see them as pests but some don't. They believe, pest or not, those rodents deserve to live. Others are afraid that seeing real death is somehow harmful to the mind of the viewer. I certainly don't want to show a screaming squirrel in a trap to my three year old niece. Both points are weak but valid. I think there ought to a way to add a filter to KZread so you can set an account to G, PG, PG-13 and R. Just like the movies. Make this stuff PG or PG-13.

@ChrisGilliamOffGrid

6 жыл бұрын

Jack Alope I age restrict the ones where I use adult humor like the frozen cat and vibrator video, but shooting a critter in the head is something every kid does, it's not a big deal.

Seems like more rubber bands might make it more effective too.

@xVisuaLxEffects

6 жыл бұрын

realvanman1 He may have been afraid the tension could break it. He was using a lot already. But his idea was metal af and I'm sure it made the video more interesting.

@realvanman1

6 жыл бұрын

Agreed. And it certainly made it more effective, enabling it to catch a squirrel. Impressive!

@ddegn

6 жыл бұрын

I'm not sure if this was the best application for 3D printing. I think a normal PVC pipe with some metal hardware would be more appropriate materials for this style of trap. I agree with Taking Leave about the mods making the video more interesting.

That rat bastard is so lucky. The one time he falls for a trap and he gets out by the skin of his teeth. Please Shawn hurry up and catch him, pretty sure everyone unanimousely wants to see that guy get caught.

@sunnynexxt

6 жыл бұрын

miniZergling That rat didn't like that squirrel probably and told it to go check out the new fancy place that's opened.

@VenomTheCat

6 жыл бұрын

Next video he will be toast

@rattusnorvegicus4380

5 жыл бұрын

...maybe even on toast, judging by Shawn`s culinary skills!

Warning: if you wanna watch the full clip of the squirrel, *DONT* use headphones the noise is extremely loud

Squirrel: approaches trap Me: *I am big sad.*

I would leave the trap in the area unset, see if the rat can get comfortable with it again.

Give it a little flip

I like how you set the trap back down so you can "give it a little flip" instead of if just falling out like it was about to

I didn't expect a trap from Markus to fail since he's been really good. I'm definitely interested in the improvements he'll make to this one from an engineering standpoint.

Looks like Ratzilla has mouse henchman to check for danger. No Superannuation funds for that job mouse.

Shawn: We need improvements! Also him: *adds 2 nails* omg this is Saw in making.

Did you really expect to catch him?He's built nest in ur studio already.He's here to dominate over ur traps 😎

@jimbospikelee

6 жыл бұрын

They need to go to war

*Great idea* on how to make the Trap better *Shawn!*

You didn't give the squirrel a little flip

@raeangel69

6 жыл бұрын

But on the private video he did lol

@joshg6491

6 жыл бұрын

Pickle Rick yes he did

@rattusnorvegicus4380

5 жыл бұрын

Squirrels need a bigger flip.....wait `til he starts hunting buffalo!

The uncensored video was crazy!

That 5 seconds of silence at the beginning always makes me check my volume. You could really do with an intro. Maybe do a competition?

I love when Markus sends a new 3D printed trap. I can't wait to see the next iteration of this trap.

Anything with a working chocker is a piece of art.

That squirrel death was so dramatic... When you thought it was over, BAM! Caught me by surprise twice.

This thing should now be named “the vampire”

Boy was that squirrel pissed!

R I.P Alvin

@fidelcatsro6948

6 жыл бұрын

rip ...sobs..

@deshaefromarounthawayricha7324

6 жыл бұрын

fidel catsro lol

That rat is a survivor. Gotta give it to him for not grabbing the food the second time and called his enemy, the squirrel, to grab the bait.

The ground squirrel really suffered in the unlisted portion

I just watched the full version, I never knew squirrels made that sort of noise

"A Little Flip" another rodent is dead again. Shawn your right the squirrel didn't like it was screaming! Also Snowflake died again. Snowflake didn't like it too...I hope you have a great weekend with your family! 😊

That looks like an effective trap with potential. The body can be made from a PVC tube, with light holes in the far end . The flat components can be made by heating and flattening sections of thin wall PVC or other plastic, or this rare substance called steel. I would add a lanyard of small chain.

Shawn, your modification is brutal but effective. Good job.

Shawn, perhaps you can obtain some sort of gauge to measure the spring tension of traps (something similar to trigger pull gauge for guns, maybe) so that some obviously too weak traps you won't have to make the animals suffer and you can keep mostly instant kill traps on your main page. The same pull gauge can be used with the finger puppet mouse if you can pull it out without much resistance the trap is considered useless.

Congratulations on the lethal improvement!!!

Nice work on the improvements. Glad to see designed being created and improved in a grassroots way.

What camera do you use for filming the traps in the barn? Thanks!

What a ride. Adding the nails was a true killer's idea. When we got the rat we thought we got a round 2 and was excited for it. I wasn't ready to see the cute squirrel die in his place.

Which are the best 3D printer brands to purchase? And do you have any videos on how to catch mosquitos?

Awesome videos Shawn. Keep em coming sir.

Moving the pivot point for the noose towards the front would increase the leverage on the choker. Allso instead of having the nails point at a angel bending them so they pointed straight down would be be probably more efficient. Also adding a couple more and shortening them would also increase the kill factor.

Thank you Shawn again! Especially Thank you for Markus!

Best episode yet truss!!

Shawn, Thank you. You did real good. The modified version is really effective.

I applaud you, Mr. Woods, for imparting us with your passion, efforts, knowledge, and experience of the vast methods of eradicating these vermin. Your bruised fingernails alone subtly express your dedication to your art. Thank you!!!

I saw the unlisted video. I feel sorry for the squirrel. It was screaming for help.

Holy cow! That improved is vicious man but really effective

@fidelcatsro6948

6 жыл бұрын

next step Shawn will place 110volt AC polarities on each spike, one Ground nail and the other Live nail!!

I wish you would start catching skyrats. Those buggers love to eat the new growth in tomato vines, the tops of pepper plants, and if you don't do anything for each tomato or the whole plant you won't end up with a single nice tomato.

You can't watch the video of the trap in action on your website. It says that it cannot be viewed due to privacy settings of the video?

@IntarwebUser

6 жыл бұрын

I got that, too. Enable javascript fully for that tab and it will work.

Thank you markus , keep them coming

I was hooked! The good noose is that I enjoyed the video :3

What if you were to sharpen the plastic noose?

To make the original version better, I have two suggestions: 1- Either make the length of tube, longer so rat is fully inside the trap, before trigger activates. 2- Add the 2 nails to 2 and 10 o'clock position of the moving circular door, instead of fix location behind that. So it won't discourage the rat to enter, being wide open, then the momentum of moving door, make a better body piece and possibly a faster, smoother kill.

That rat has become your arch nemesis..I feel Iike he's got his own trap avoidance videos

Finally you back

@AdriJuice

6 жыл бұрын

Jonathan Mendez-Ochoa its been like cuple days

@JonathanMendez4820

6 жыл бұрын

Im AJ yeah I know

@AdriJuice

6 жыл бұрын

Jonathan Mendez-Ochoa tbh once a week isnt enough, we need this 24/7

@KP-ce6fx

5 жыл бұрын

Im AJ ikr

That rats pull out game is 💪🏻

I was gonna suggest some kind of locking mechanism live two levers on the outside of the choker ring that have tension pulling them together. Thid way, as yhe ring gets higher the top of each lever slide further underneath not allowing it to move back down. Essentially a ratcheting system. But two nails is much simpler and effective enough for a squirrel

I always enjoy getting on KZread a seeing what wacky mouse traps you have

I'd like to see how effectively these traps can get rid of these vermins but not how it can actually toture poor animals. The lesson learnt here is to avoid using barbs when making a trap.

Bro is every trap like a mortal combat finish kill to him, like, yeah, ill just add spikes to my rat choking machine

Love the sound effects. You should compile the sounds of multiple kills. That squeal! 😳

This trap is a great proof of concept/prototype but If it was made with metal pipe welded to a metal platformthat could be screwed or nailed to the floor it would probably work without the spikes. a noose is probably also more effective than a plastic disc like that. Great job Markus get in touch if you want to share ideas I speak swedish.

I watched the uncut footage. That screaming was one of the most horrible things I’ve ever heard.

who wouldnt want to watch a squirrel flopping around and screaming while it is slowly drowning from reality

I saw the footage of the squirrel getting caught, it almost sounds like a tribble screaming when it's near a Klingon lol

Rather than spikes I would suggest adding ratchet teeth on each side of the snare and spring loaded pawls in the sides of the slot the snare moves in. Once the snare snaps closed the animal cannot open it to pull himself free.

Can you design a trap that sucks in the mouse, throws it into a shredder and collects all the goo in a big jar?

Yay finally a direct link to the vid

That's one badass modification!

Just re watching all "Mouse trap Monday" vids only to just now realized this video is on my birthday -w-

Don’t know why but KZread gives me your file name in notification. 3D rat final for this one

@KayD

6 жыл бұрын

Soumyadeep Roy same for me, with every video

@AdriJuice

6 жыл бұрын

Same

(Trying to catch rats) 「Squirrel joined the server」 Everybody watching the video: *_N O_*

I suggest bolting the trap to a flat board so it doesn't go flying when the rat gets ensnared.

Great trap!

Do you think just adding more rubber bands for more power or twisting the rubber bands for more power would allow the trap to kill more effectively without the nails?

The spikes were a good idea, but you probably could have just added a couple of bands to tighten the noose a little more. And that should have kept it from getting loose.

Me after seeing the killing footage: THATS ALOTA DAMAGE

Wow. The sound the squirrel made tho

Awesome video, especially the private link video, Little flip!!!

Every video I have ever seen and the animal get caught by the trap, I think... ‘got em’

Now watch in amazement as I saw this mouse in half

Call it, "Blue Vampire Tunnel of Death!!!!"

*the private footage is crazy*

What about stronger spring instead of blood dripping devices ? It would not go through its neck .

You weren't kidding when you said the squirrel's dying noises were unsettling.

Looks like the circumcision machine is really coming along!

When I click on the link in the description, it says that the video no longer exists...

4:31 that's like getting an answer right on a test but using an incorrect formula to get your answer

That ground squirrel was screaming when it got caught *oof-*

Where is the unlisted video? I clicked the link and can't watch it.