STL FILES ALSO AVAILABLE NOW! Etsy shop: www.etsy.com/de/shop/NokiOne

@_SR375_

4 ай бұрын

RetrobrewDE is currently not selling on Etsy

@user-ih6oe9ny3j

3 ай бұрын

did u remove it from etsy? where can we get the stl?

So cool to see somebody else figure out the laser print & tape trick we've been using in our fine art for a little while now! A couple of tips that we've figured out that might help you in future laser decals: a little drop of dish soap on your fingers helps keep your adhesive sticky (keeps your skin oils from gumming it up). And we like using laminating sheets instead of adhesive tape, as it's a little thicker and has more adhesive. Happy making!

@KevinNoki

3 жыл бұрын

Cool! thanks for the advice. I’ll try it on my next projects! :-)

That is seriously the coolest Hackintosh ever. ❤️

@KevinNoki

2 жыл бұрын

Thank you!

You sand so fast, you don't need a belt sander! I'm impressed.

@KevinNoki

Жыл бұрын

Made my day 😂 to be honest the sanding part ist just faster. FYI since last year I’m a happy owner of a belt sander 😃

Those green LEDs you use to solder the Pis for your MacPi cases can be sold for about $9 a pack at Amazon. I'm currently designing a MacPi case STL file for the newly-released rPi 5 (inspired by your project), which includes a switch for the power button, and I made a new label for the case with Inkscape and Linearity Curve. The Apple logo was used as a placeholder for an icon I made for the label. Once I finish, If you like, I can PM you the STL file and the label. Maybe you can make a few improvements to the case design.

6:46 this tape trick is so awesome! Thank you for this video!

especially love seeing the caliper and paper step of the design process thank you

@KevinNoki

3 жыл бұрын

Thank you! :-)

Id buy one of those already built from you! Amazing work.

LOVE the creativity and execution!!!

@KevinNoki

2 жыл бұрын

Thank you very much :-)

Wow that's just a stunning build - the transparent decal was esp cool!

@KevinNoki

3 жыл бұрын

Thank you very much! :-)

Amazing! 100% Perfect for Retro Fans.

@KevinNoki

4 жыл бұрын

Thanks :-)!

Dudeee this looks amazing! I'd love to have one of these myself! Great work!

@KevinNoki

3 жыл бұрын

Thank you so much! These will be available again soon :-)

This is so amazing! I've been wondering since a long time how I can build a plastic beige case (or at least a good imitation thereof) and turns out you can use sprite. Also important to polish the recently printed pieces.

this is super cool! good job and congratulations on the great outcome!

@KevinNoki

3 жыл бұрын

Suchipi thank you very much!!

The music is funky fresh! Awesome video

Beautiful work!!

Incredible work u have done! Perfect, congrats!

@KevinNoki

3 жыл бұрын

Iván Muhlenberg thank you so much Iván I really appreciate it!

Kevin, any chance you'd make the CAD files to this available for the public?

@don-dadda8006

3 жыл бұрын

Yes please. Really enjoyed watching this creative video all the way through.

I wanna make a vintage Mac case/shroud for my M2 Mini!

@KevinNoki

11 ай бұрын

Great idea! I made one for the Mac Studio a while ago unfortunately I don’t own a Mac mini m2 but it should look amazing :-)

really cool construction!

Saw this on Reddit, super cool!

@clashwithkayden3428

4 жыл бұрын

yanksrock1000 same

That's some nice work right there!

@KevinNoki

4 жыл бұрын

spooforbrains thank you my friend!

That was pretty impressive to watch.

@KevinNoki

Жыл бұрын

Thank you ! :-)

Great job on this!

@KevinNoki

8 ай бұрын

Thanks Michael!

Cool project!

@KevinNoki

4 жыл бұрын

Thank you !!

Genius! I loved!

@KevinNoki

3 жыл бұрын

Thank you very much! And happy Easter :-)

Damn cool. Awesome attention to detail! Also, has anyone out there attempted to print a full on full size retro Mac case, i.e. for a Macintosh II series or Power Mac i.e. Power Mac 8500? I have an 8500 heavily upgraded but its case is brittle as hell... I'd like to either print myself or have some someone print for me a new case for it so I don't have to be so careful with it.

This is awesome! My only suggestion is that you put some black electrical tape on the inside of the case at the front right side to block out the red power LED from shining through the plastic 14:23

Un Súper Invento!!!! 👍🏻👍🏻👍🏻👍🏻😄

@KevinNoki

4 жыл бұрын

Muchas gracias :-) !

Such a gorgeous case. I'm sorry I only now discovered your channel and this video (or I would have insta-bought this case + mouse). I hope you can still reply, what is the liquid you use when sanding the PLA? I'm guessing it might just be water + dishwasher soap?

looking forward to buying this case, good job!

@KevinNoki

3 жыл бұрын

Thank you very much Andre :-) few more days and it will appear in my Onlineshop

@andre0000000007

3 жыл бұрын

@@KevinNoki is it there yet?? : )

@KevinNoki

3 жыл бұрын

Almost! Waiting for some Parts which are needed to build this case then I can start! Thanks for your patience :-)

@KevinNoki

3 жыл бұрын

etsy.me/3kwrnAT

Beautiful-- and awesome with the decal. I had no idea that could work. Can you tell us exactly what you sprayed after you affixed the decal/tape? Some kind of varnish?

@KevinNoki

4 жыл бұрын

Richard Peacock Thank you my friend! I sprayed a few layers of clear coat to prevent a detach of the logo :-)

@KevDoy

4 жыл бұрын

@@KevinNoki did you use a laser or inkjet printer?

@KevinNoki

3 жыл бұрын

@@KevDoy sorry for my late answer! I saw your question just right now. This process works only with Laserprinters

@KevDoy

3 жыл бұрын

@@KevinNoki thank you! Any chance of releasing the STLs? 😇

Great work! Im currently designing a universal measurement housing based on the atari XL line style. Im allready courious how my printer will handle all those many cooling vents along the facetted edges...

@KevinNoki

Ай бұрын

Very cool I think it will be Awesome! :-)

This gives me Nostalgic about a Mac OS 9.

Really cool please upload it somewhere

Hello I saw you your own made mac case its great!! i want to buy your case without raspberry Pi thank you

Dude, this is freaking awesome. I wish I had those skillz. I want to make a life size Macintosh classic or se to fit a 7' or 10" LCD with a pi 4, but I can't model and don't think it would fit on an ender 3 to print lol

@KevinNoki

3 жыл бұрын

Thank you very much bro! Actually I’m having the same idea to print a life size Mac I’ll release a video soon :-) should be also possible on the ender 3 if you split the parts so that those fit on the buildplate and glue them together in the end 😃

@adonian

3 жыл бұрын

@@KevinNoki if you make a render and subsequent file for printing, cany you let me know. I'd love to make it. I've been looking at Amazon for the r-pi lcd kits between 7-10"

@KevinNoki

3 жыл бұрын

@@adonian Sure!

Also could you please create the macintosh pi for the raspberry pi 5 because it’s a much more capable machine and I’m planning on 3D priming the files

any chance of the STL files becoming available again?

How could you emulate the 68040 and Mac OS 9?

awesome work, stunning any chance to get these files to reproduce your cute case for private purposes?

@KevinNoki

3 жыл бұрын

Thank you very much! I’ll try to release it asap

Not read all the comments so it might well have been said before but… Apple Pi, surely!?

Hey why are there no more stl files and where can I get them?

Instant buy!

@KevinNoki

3 жыл бұрын

Soon available again :-) thank you 😊🙏

@GeeksWorkbench

3 жыл бұрын

@@KevinNoki Do you plan to sell that wireless retro 1984 mouse? I have been looking for a similar product to buy. (Maybe a little bit less original one with two buttons similar to C64 mouse and probably with a scroll). I must say that RAL 7044 made my day. Thanks for that. I've already ordered some Ral 7044 spray paints after watching this video.

Super Awesome, how did you get a Macintosh to work on a Raspberry Pi I have tried but no luck.

@KevinNoki

Жыл бұрын

Thank you! Try Sheepshaver :-)

Would love to buy the STL for this if possible. I see the Etsy store is down

@KevinNoki

Жыл бұрын

Hi Dylan, the STL is now available on Etsy! Regards Kevin

Wait wait: 6:52 what kind of paper are you using? =D

Could you explain that "decal making" process? Is that a special paper? or tape? How does that work?

@KevinNoki

4 жыл бұрын

Ian McCullough Decal is actually a special foil that you can print on but I did mine with a simple Laserprinter, Tape and Water :-)

awesome! pm8500 was my favorite tho. btw can you share how you installed macos 9 on your raspberry pi? everything works well? does sound work?

@KevinNoki

4 жыл бұрын

Thank you Jamie! Check out the video from the KZreadr „Novaspirit Tech“ he’s explaining it how to install OS9 on Raspberry Pi -> It works great! sound as well!

@jamiesowell

4 жыл бұрын

Kevin Noki Thank you so much!!

What bgm are u using

what are you running for macintosh classic emulation? Sheepshaver or something else? I remember giving up on macintosh emulation at the time of sheepshaver due to things like no usb or serial support. Would be interested in what you are using :)

@KevinNoki

3 жыл бұрын

Hi Matt, I’m using sheepshaver ARM version on rasbian you can find your USB drive through the Unix partition or set it up as a shared folder i guess that should work too but I’m not sure yet. Serial support might be difficult

Hey, two questions. Since you're not making the case anymore, do you sell the CAD files for printing? Also, how did you get Mac OS 9.XX to work at what seems to be close to full speed? Are you using QEMU-PPC or SheepShaver

@KevinNoki

3 жыл бұрын

Sure, I‘m going to make more cases those will be available soon :-) I‘m using sheepshaver with good results. Thanks and have a great day!

Y los STL ?

Your work is awesome! Any chance you’d sell the case/mouse? I’d definitely purchase both if you had an online shop :)

@KevinNoki

3 жыл бұрын

Thank you very much!!! I'm producing both products right now, the shop will be online soon :-)

@TheAuriconGroup

3 жыл бұрын

@@KevinNoki Hi! I am also interested in buying one! I have a Mac Color Classic at home, but would love this little guy. Please put me on your list when they are available. Thank you. You can email me at: mraroid@gmail.com

Not available under the listed link, can the 3d model be purchased and self printed?

@KevinNoki

Жыл бұрын

Hi! Thanks for your Comment currently there are only versions available that weren’t polished. 3D Printed lines are visible, here the link to my shop: www.etsy.com/shop/NokiOne

Wow Nice Project, what printer do you have?

@KevinNoki

4 жыл бұрын

Thank you! I used an Ender 3 for this project

Now we just need macos 9 for raspberry pi

@KevinNoki

4 жыл бұрын

Emulation is possible with sheepshaver :-)

@oofingberg

4 жыл бұрын

@@KevinNoki but its sadly just emulation would be really nice if someone would port it to raspberry pi natively even if then no external software works

@oofingberg

4 жыл бұрын

@@KevinNoki great work that case looks amazing i really love the old design language of apple the new aluminum looks great too though

@KevinNoki

4 жыл бұрын

Sure that would be amazing!

Will my low profile ice tower fit in this case

@KevinNoki

3 жыл бұрын

With some little adjustments it should fit :-)

Cooles Projekt! Wäre es möglich, dass du die 3D Datei veröffentlichst? Oder würdest du so ein Case auch Verkaufen? :D

Err, this is wicked… any chance you could make more complete kits and take my money?

@KevinNoki

3 жыл бұрын

Sure! You‘ll be able to spend your money by end of next week since I’m going to release an upgraded version of this case on my online shop! :-) I would be very happy to make one of these for you! thank you for your comment and kind words! Best Regards Kevin

@KevinNoki

3 жыл бұрын

etsy.me/3kwrnAT

Real Mac Mini 🤣

Which software did you write on sd card ?

@KevinNoki

3 жыл бұрын

The OS is Raspbian the Software is SheepShaver

Will a usb floppy drive work with the emulator?

@KevinNoki

3 жыл бұрын

That’s exactly what I was also asking myself, so I ordered a usb-floppy drive. It should arrive the next days then I’ll give you an update!

Where is the resistor for that diode?

@KevinNoki

2 жыл бұрын

Hi John its soldered to the LED

are the files avalibe to be bought?? i neeeeeeed this!!!!

@KevinNoki

6 ай бұрын

Yes my shop is going to be online next week again.

Are you ever gonna sell these again🥺🥺🥺

@KevinNoki

3 жыл бұрын

Yes I’m working on it. The Shop will be online soon :-)

how did you get os 9 to run on the pi?

@KevinNoki

3 жыл бұрын

Hi, I'm using the SheepShaver emulator

Can you 3d print a retro case but in laptop form?

@KevinNoki

3 жыл бұрын

Sure I’ll put it on my list for my future videos :-) Have a great day!

@Zen-Koru

3 жыл бұрын

@@KevinNoki ok thanks I'll subscribe so I can see it thanks

@Zen-Koru

3 жыл бұрын

Oh one other Question I've ben looking for a raspberry pi laptop 3dprinted case online but I had no luck. And I don't have Good 3d modeling skills. When you make the shell for the classic laptop can you send me a dow load link on my gmail or discord or something? Bucuse I'm getting really tired of searching and all I find is desktop shells. It would help me for my project of making my dream laptop thanks. I can send the blueprints that I drew so it could be more easy for you to make it and you could agust the size to make the rasbery pi fit it in with the kind of ports I would like. But the internals I could do I just need help with the case.

so just need a bare metal Mac emulator for the Pi

The prices on eBay are so F*ED up.

You are not running MacOS 9 directly, right? I guess you are using some kind of simulator... correct?

@KevinNoki

3 ай бұрын

Yes, I used for this project the Sheepshaver Emulator.

I want one soooo bad

@clashwithkayden3428

4 жыл бұрын

Kevin Noki thanks

@Apfelaktuell

4 жыл бұрын

Clash with Kayden! Me too 😩

hey... suuuuupper 👍👍👍👍🤣🥰🥰🤓 kannst du uns deine 3d druck datei, für das pi gehäuse geben? zb. mit einem link unter das video... 👌 thanks from deutschland. 🙋🏻‍♂️

@KevinNoki

3 жыл бұрын

Hi Martin freut mich das es dir gefällt! Werde die kommenden Tage die STLs hochladen, da ich noch ein paar Verbesserungen vornehmen muss. thanks ebenfalls from deutschland :-)

I guess that's chumacalit an Apple Pi

Apple Pi.........

good job, but i would love to hear you discuss your process rather than listen to music.

@KevinNoki

8 ай бұрын

Thank you so much for the feedback! I totally agree with you, in my next video I’m going to improve that.

Background music way too loud and annoying. Cute retro style MAC emulator.

@KevinNoki

11 ай бұрын

Thanks for your comment! I agree with you I won’t add any background music in future videos

OMG! YOU ARE MY MENTOR!!!!! NICE WORK

@KevinNoki

3 ай бұрын

Thank you ! 😀🙏🏻