Vaseline and other petroleum products in general, actually degrade and break down PLA parts. It may be possible that the blue PLA was particularly susceptible to the petroleum degradation. The Burt's bees you used on the tank is probably ok, because it uses wax as a lubricant. For long lasting lubrication, you should probably use a silicone based lube, so it won't disintegrate your gears.

@gewizz2

4 жыл бұрын

what about butt lube? is good?

@dwang085

4 жыл бұрын

@@gewizz2 yep

@BM-su7kc

4 жыл бұрын

@@gewizz2 yep, that's silicone based. But that goes dry quickly

@skysurferuk

4 жыл бұрын

@@BM-su7kc "Goes dry quickly"... not sure I want to know how you know that... :)

@robertomartin8731

4 жыл бұрын

I was also going to mention this. Petroleum will eat the PLA. He is better off without lubrication since it's not running real fast.

This is the kind of tinkering content I enjoyed 8 years ago and still do

@CommoMike

4 жыл бұрын

Same here.

@lukemagdalin6169

4 жыл бұрын

Yes

@kylethompson2431

3 жыл бұрын

Hearing “8 years ago” is trippy bc I keep forgetting we’re 20 years into 2000

@ST3W101

3 жыл бұрын

Definitely

@Wesley-wz3mk

2 жыл бұрын

Same

wow, you getting a lot of life out of PLA parts.

@jessestevens2927

4 жыл бұрын

PLA can be amazing with mechanical parts if lubed well. We built an inmoov humanoid robot that toured around Australia for 2 years performing so many shows. The gearboxes were all printed pla lubed with PTFE grease. All still good!

@elijahr6261

4 жыл бұрын

Jesse Stevens Took me longer than I would like to admit to work that one out.

@errorgd

4 жыл бұрын

@@jessestevens2927 Never had much luck with them. but it's good to see that they can work well. I'm going to stick to ABS and Nylon tho...

@Snooooozel

4 жыл бұрын

@@errorgd Try ASA

@namAehT

4 жыл бұрын

ASA for structural parts and a high durometer TPU for the wheels maybe? Giving the treads a little flex wouldn't be a bad idea so they can spin if they get caught instead of the torque shredding grass and snapping components.

There's so many reasons I want to buy a decent 3D printer... And this is just adding to the list lmao. Fascinating video

@clonkex

4 жыл бұрын

I would highly recommend the CR10-s as a very good first printer. It's large and precise and way nicer to use my custom built printers 😁

@dirtyhooker6317

4 жыл бұрын

@@clonkex 3 grand later... Lol

@forloop7713

4 жыл бұрын

What's wrong with a 200$ 3d printer?

@ddegn

4 жыл бұрын

My first 3D printer arrived a couple weeks ago (Prusa i3 MK3S), it has been every bit as much fun as I thought it would. In hindsight I realized the cost of the printer isn't the real expense. It's the cost of all the different filament I want to try. I plan to upgrade some of my robots with 3D printed parts. (Check my channel for my Halloween Hex hexapod.)

@errorgd

4 жыл бұрын

you don't want to know what good old anet a8 can extrude ;)

Try Rounding off the edges of the wheels so that it doesn’t tear up the grass and it turns more efficiently

@justinwood2

4 жыл бұрын

Why not just eliminate two of the wheels? With just two powered wheels and a larger caster it would turn on a dime.

@avidhbavkar5020

4 жыл бұрын

justin wood there is grass and dirt

@robertcampbell7997

4 жыл бұрын

Those are for grip, but I can't see many other ways to get grip, so rounding it would be would help, but how else do you get grip.

@oProtica

4 жыл бұрын

Or he could simply use a differential

@ferrumignis

4 жыл бұрын

@@oProtica How would a differential help on a skid steer vehicle with separate left and right drive motors?

I really love the autonomous aspect...patiently taking care of business alone in a meadow for weeks at a time. :) Doesn't really have to be on another planet to be amazing.

@maxhouseman3129

4 жыл бұрын

It is a waypoint mission. Not that complicated. Doesn't have any sensors or a real task.

@chrismofer

4 жыл бұрын

​@@maxhouseman3129 jeez downer, let them be amazed by autonomous hardware. driving around for days and days unattended is impressive enough, "Doesnt have any sensors" neglects the global positioning system, gyroscopes, compass and barometer which he is monitoring and recording to watch the driven path later for tuning, to reduce the deviation from the way-point path.

* puts a 13:1 gearbox * Wow, this thing has so much torque

@lucassvedlund3851

3 жыл бұрын

didn't the barbie gearbox also have a reduction? so there are two step-downs between the motor and wheels?

@VerbenaIDK

2 жыл бұрын

not enough torque!

Consider setting two voltages in the Arduino: a lower threshold to stop the rover and a different, much higher, one to restart it. It should avoid frequent stops and restarts.

@LaggerSVK

4 жыл бұрын

Thats called a hysteresis controller and its what he had implemented. If it was just one threshold, it would stop start all the time.

I think you should limit the turn rate to one side spinning 50% faster than the other. Reduce all that binding and stress

@rider573

4 жыл бұрын

Skid steer doesn't seem to be working well at all. Maybe traditional steering on the next rev?

@GoatZilla

4 жыл бұрын

doesn't seem like there's an ESC or feedback on that thing

@Pystro

4 жыл бұрын

Yup, The biggest mistake is driving the wheels sideways while turning, by using a +1.00:-1.00 speed ratio like a tank (see 6:10). Not a big surprise that the wheels break if you just slam their sides into obstacles on the ground. Try turning by driving forwards with a 1.00:0.80 left:right speed ratio, or driving backwards with a 0.80:1.00 speed ratio, or by alternating between the two for about 2-3 feet / 1 meter. That way you will limit the slip on the wheels, and they will go mainly forwards or backwards, which is the direction they need to go to roll over obstacles.

@rubiconnn

3 жыл бұрын

I don't get why not have just the two front wheels driven and have a single castor wheel in the back.

Been watching your videos since you were just a kid. It has been cool to see your engineering skills grow over time. You have always kept it real and shown the fails as much as the wins. In engineering we often learn much more from the fails than the wins. I was an R&D engineer for a semiconductor instrumentation company and most of the time the projects failed, but we always learned from our mistakes and were able to build upon that knowledge to create some next-level technology. I don't think most technological advancements come from huge breakthroughs, but from very gradual improvements. Exactly like how you make something that sort of works and then keep refining it. Your solar powered plane and autonomous boats are my favorites. Great channel, thanks for sharing your adventures with us.

Your projects are some of my favorite on KZread, you dabble in so many things that pique my interest! Keep it up man!

Imagine during the apocalypse there’s just a giant one of these moving through the desert

@xyzinjosephjamodiong2072

3 жыл бұрын

Yeah just like the movie "Mortal Engine"

@ChasenR

3 жыл бұрын

Perfect idea for a nomadic lifestyle, follow fresh water and food, using the sun to move and nights to rest, have them just large enough for a decent sized family to live on (2 adults 3 children). Theyd be heavy as hell but with proper resource supply and shading, itd be a fun trip across the desert. If it were amphibious though, any semi flat terrain and calm water could be your domain. Id suggest Colin Furze to build the prototypes.

Can’t wait for the autonomous lawnmower build. Definitely going to try one myself. Btw what’s the all up weight of this rover?

@Eratas1

4 жыл бұрын

Thinking of building RC lawn mower with cameras. So i can mow a lawn inside house sitting in couch.

@defyslowmotion1

4 жыл бұрын

With a 4g connection it could be started up and controlled/monitored from anywhere.

@ottotater2787

4 жыл бұрын

@@Eratas1 don't use RC, do autonomous. Its cooler and you can't see the lawn well enough from the living room to not miss spots in the yard. Make an autonomous lawn mower that follows a pattern and has a built-in leaf blower that blows off your street driveway and sidewalk when it gets through before it puts itself into its self locking parking space.

@octoniumvideos

4 жыл бұрын

I built one. It automatically starts up every weekend and cuts a path. It works pretty well

@ottotater2787

4 жыл бұрын

@@octoniumvideos that's the ticket.

this is such a fascinating project. Loved to see you come back to it still running three weeks later! I can't wait to see it run the whole summer without maintinance

my goodness gracious... the time involved... I can't even imagine. great work, thanks for these videos!

Dude this project is amazing !! I enjoy following the progress and development of the rover and I learn a lot from your improvement. Thanks so much for sharing your videos and files Keep up the great work!

I love seeing your projects! Great job. The gearbox is super cool and the autonomous aspect is awesome. My favorite videos of yours are the boat and tank videos, but this rover is cool too! Looking forward to future upgrades.

I'm always so excited when I see you uploaded a new video! 😄

This is really valuable information to share with us all, thank you. It's impressive the amount someone can learn from just watching someone else do it.

Awesome project. Wish I had the time to Tinker and design cool electronics/robotic projects like this. I know you've invested a lot of time and hard work to get to this point. Keep it up!

I've been watching for a very long time and its been really cool to see your progression through different projects and different scales of projects. I still remember they days of the cargo condor. Been 10 years or so by now but that was one cool cargo plane for sure.

What psychopath eats a burger patty with his hands and without bun

@jamble7k

4 жыл бұрын

a man with an army of autonomous rovers

@darkmann12

4 жыл бұрын

what psychopath eats crushed dead animal

@markallen200

4 жыл бұрын

A diabetic one...😁

@UltraBadass

4 жыл бұрын

@@darkmann12 straight off the carcass after it has be thoroughly charred from the bushfire you just set in the savanna is the way to go

@darkmann12

4 жыл бұрын

Too right @@markallen200

Daniel thank you for the great content you put out! I've been a subscriber for a long time now and your videos are so soothing to me and I always look forward to watching new ones. Thanks so much bud!

Was thinking of something similar for hunting meteorites in the Wyoming desert. Simple metal detecting bar dangled way out front. Was thinking everything on the drives needed to be metal. Now I think 3D printed stuff is actually better. This is good work!

Keep making these videos, I love watching all of your homemade autonomous and controlled rovers

Good job! Glad to see this series continuing!

Great progress! Also thanks for the electronics explanation at the end. Maybe add a universal or spherical joint in your steering hinge, like those large front loaders.

It's been 5 years since I found your channel, I enjoy it now as much or even more as I did then

@safetyinstructor

3 жыл бұрын

Same here, His videos never get old. Sometimes I re-watch videos he uploaded years ago.

Yes! Got excited from the sneak peek on a previous video!

This is so cool. I was thinking of making autonomous guard bots for my grounds.. Just this design with a camera will do it, it seems.. Great work.

great job its almost unbreakable now and we learned something love the project :D

When you think about It. actually kind of a cool idea to have articulating frame that twist when you do sharp turns to reduce lateral torque on the gearbox.

Very cool stuff, those gearboxes are crazy! Seems like there is a lot of stress when it goes to turn - perhaps make the drive train so some wheels can go backwards while the other go forward in order to greatly reduce forces while turning.

The pwm sbus part takes your signal and modulates it / demodulates it from serial into pulse width modulated. It is therefore a modem.

That was fun to watch. Nice work

You probably hear it all the time, but your videos are seriously awesome Daniel. Super cool stuff 👍

I love this. I'd be constantly checking up on the damn thing though- I wouldn't be able to leave it alone! Just have to note: I expect petroleum jelly eats PLA. Silicon grease would be appropriate. Also, I'm guessing you combed that field thoroughly for discarded plastic? What a task..!

Really nice to see it could run for so long. But now that I've seen the sneak peek with the brushless motors... I can't wait for the next video!

I love Genasun! I have one on my golf cart wired into the solar panel roof to charge the cart. I wish their 48V boost converter had a switch to change between SLA and Lithium though because if I decide to fork out the cash to upgrade my batteries I'll have to buy another $200 controller. But I can always still use the SLA one for my Ryobi riding mower. Great video! I've only seen a few of yours so far but they have yet to disappoint.

Great durability test. Lot of experience you get here.

... i really got an advertisment on this video and guess what: "worlds brightest flashlight". It used your videos and i'm pretty sure they never asked for your permission.

Videos like these are the reason why hardware stores make me feel like a kid in a candy store.

I'm loving it. Good video.

I’d grab a couple springs to put between the articulating bodies to help keep it from torquing over but still allowing movement

I love these videos, its so interesting!

Don't stop making these they are always a treat

I appreciate the briefness of the PCBWay ad. No sales pitch, and doesn't make me hate the company for an annoying ad! I was actually trying to remember the name of this company. I'll probably order some more boards from them, I got good results in the past.

That thing could drive for jears with proper metal parts! (Sry for my bad English)

@gibbyace5077

4 жыл бұрын

And better lube, wet silicon lube would work better for both Metal and plastic parts

4 жыл бұрын

Petra Schack-Beckschulte, kommt auf die Akkus und Solarpanels drauf an.

@mareksykora5197

4 жыл бұрын

Proper IRON parts. Not every metal is good. I don't believe aluminium much.

@randomstuff-cu4of

3 жыл бұрын

@@mareksykora5197 in this application where temps wont be much higher than air temperature and theres a lot of moisture exposure aluminium would survive functional longer than iron for sure. stainless steel would outlast aluminium but in this application both would probably well outlast other components in such a rover like the battery or maybe even the motors since they are brushed and thus will experiance wear even under normal operating conditions

@mareksykora5197

3 жыл бұрын

@@randomstuff-cu4of Yes. But aluminium has a big problem with long lasting cyclic forces and it is not so durable, the parts have to be bigger.

You definitely should have used PETG for all of it. With that said I’m very impressed with how well the PLA worked lol

@AlexJoneses

4 жыл бұрын

Nah, abs or nylon, fuck it... Ultem gearbox

@willasproth

4 жыл бұрын

PETG is a scam

@SG-yq7fm

4 жыл бұрын

Will Asproth PETG is an amazing material if you get it tuned in well. Keyword is if, ofc

@willasproth

4 жыл бұрын

S G after using a roll of it I have decided it’s just more temperamental PLA

@gavingavinchan

4 жыл бұрын

Or PLA blends

I love your videos, they inspire me so much

Just happened onto your channel for the first time today. What am excellent project!

1:00 In my experiences, sometimes, if you thread the nut in a bolt/screw, then hit the bolt, you can more easily control the direction it sets.

I like your vid's man! Must take a lot of time. Keep up the good work!

If you ever head back to Utah doing missions with one of these autonomous way-point rovers I'd be really interested in seeing it in person. I might have to start one of these projects myself.

Awesome project!! Could be helping to pollinate the wild flowers too!

this is super cool, i'm sure nasa engineers underwent very similar experimentation while designing sojourner. when your wheel broke, it looked like about 7% gyroid in there lmao most of the gearbox parts are gunna need to be like 60%+ rectilinear or something for that long lasting strength, look into a proper grease or silicone lube or something thats rly safe on plastics. this is exciting I have an ardupilot setup and wanna make a rover myself now..

Really enjoy your videos.

Hey Daniel, great video and the bonus content was really good about how you had the arduino controlling the pixhawk. Would be interested in seeing more of how you do this as you have inspired me to try my own rover project converting a Traxxas TRX4 using a Holybro Kakute F7 AIO board

I just stumbled onto this video. I love it and this derpy little car drone thing!!!!

why don’t you make a normal wheel turning system like NASA’s rovers, throw servos and make each wheel turn?

@rubenscavalcanti8886

4 жыл бұрын

For simplicity sakes I guess, and because it uses more power.

@hcennobody2501

4 жыл бұрын

nasa's rovers get nuclear

@ilikeyourname4807

4 жыл бұрын

@@hcennobody2501 Not all of them. Opportunity lasted really long on Mars with solar

@DieBastler1234

4 жыл бұрын

@@rubenscavalcanti8886 Simplicity yes, but skid steering is super inefficient and almost certainly wastes more power than some steering servo would. Source: I'm building a similar skid steering rover right now.

@andrewsnow7386

4 жыл бұрын

@@rubenscavalcanti8886 My first thought when you mentioned the inefficiency of the brushed motors was that the loss in those was small compared to the loss associated with skid steering. You can hear the way the motors/drive train load up when trying to steer, that's using a lot of power. Of course it would require some redesign, but since your vehicle has basically separate front and rear halves already, it might not be too hard to change to articulated steering. If you were clever with the wheel speeds, you might even be able to accomplish articulated steering without adding any steering motor (servo) directly controlling the steering angle.

I love stuff like this, it’s great

Awesome project man. Would be cool if someone could offer you access to a large amount of land for a giant waypoint mission.

You are my favourite KZreadr and I love watch your vids and all of them are made with passion

This is amazing! Imagine the efficiency if you could use a lighter material for rover frame construction

You'd benefit tremendously from access to a machine shop. Part of the problem is just optimizing the design of the moving parts, but durability issues could also be mitigated by fabricating those parts from metal rather than plastic. Probably a rover of this type with all metal moving parts would last for many years.

Idk how long I’ve been watching you but I always enjoy your content

So cool, amazing Daniel.

This seems like the perfect use-case for supercapacitors- assuming that you get the rover's gearbox(es) sorted, that would greatly increase the life of the rover, and likely increase performance- while at the same time reducing weight

you need Caster wheels in back, will solve all your problems, its fighting itself

@SG-yq7fm

4 жыл бұрын

You’d need a really big caster wheel, and it might add extra strain, but far less than what’s caused by turning in place with the current layout. I’d like to see this done

@jimsmith7475

4 жыл бұрын

I agree, a castor wheel on the rear and only two driving axles. Having only two driving axles will reduce energy requirements and mechanical complexity.

@ottotater2787

4 жыл бұрын

Caster wheels are a great way on slick flat ground such as indoor or On Pavement but turning something like this into a two-wheel drive model will have immense problems getting over small bumps in the grass

@bradley3549

3 жыл бұрын

@@ottotater2787 I disagree. Lots of lawnmowers use this. Skid steer axle with either front or rear caster wheels. They seem to do just fine, granted on a different scale, but it proves the concept works on things other than concrete. Also, I just realized my robotic vacuum uses this as well and it navigates some surprisingly large terrain given its small size.

That is crazy cool man!

Funny that you mention a lawn mower. I was thinking you could make this thing mow your lawn if made on a larger scale. You could also make it sense when the batteries are getting low and have it return to its solar powered charging station to recharge itself. And with the on board solar panels it could slowly recharge itself enough to make it back to the charging station if it was a long distance away.

Комментарий в поддержку канала и ролика, а также труда мастера.

Hi Just a thought - try your local car breakers yard and dig out some windscreen wiper motors. These are already wearherproofed and are usually quite slow rotation. The ones I’ve used have great torque and can be controlled by simple pwm motor speed controller. They’re generally 12v rated and are reversible. I made a similar rover that failed in many other ways before the motors failed.

Hey Daniel, nice video👍 At 19:07 you show that you have connected the solar panels to the charge controller via two JST connectors. I would much rather use xt30 connectors there because the JST ones have an extremely high resistance. On my small quads that only pull 5-10amps there is a significant difference in flighttime and voltage drop between the JST and the xt30.

Love that videos. Need to start tracking stats on the rover. Also, I bet If the posts weren’t threaded, the plastic bushings would wear as much in the internal diameter.

Great work! You should build it into a lawn mover and make a pattern in the grass!

You’re a diamond geez. Keep up the good work

Nice work

Amazing. First time I see this kind of transmission.

Great content, cheers

great video once again. I love this guy's content so much. Also, did you think about maybe using sponsored motors for the rover? It might introduce some newer challenges but I bet it would have so much torque.

@RCtestflight Have you considered using medium to large sized stepper motors? They excel in low-rpm torque, and could probably be used in your application to directly drive the wheels. You could eliminate any reliability/efficiency issues of the gearboxes altogether. Stepper divers are in expensive, and simply need a pulse signal to run.

Thank you for this delicious recipe.

Those plastic parts can be really immortal. My quad with PLA frame dropped from about 15 meters, and just bounced off the ground

Your axles need a differential! Or a reverse turning program like a tank. Oh and nylon printed bushings would be good too.

In addition to more boat/submarine content, I think you should try building a walker of some sort, like the AT-TE walkers from the prequels! Also, I love your work, as always. The cycloidal gearbox was super cool to watch

That's a very colorful rover, and I like it

I enjoy this kind of content so much.

Such great content, thank you! I love how you ate that burger caveman style

Your videos are awsome! Thank you))

11:04: Congratulations, you've emulated a Ducati

This rover is super cool! As someone who enjoys 3d printing as a hobby, seeing this kind of use of 3d printed parts in the world is pretty awesome. Personally, I'm really curious what would happen if you changed up the material from PLA to something else. I would think PETG would have the right properties and shouldn't be too hard to print in your CR10. Of course, ASA would also be a good choice given that you are using these plastics in an outdoor environment, but my understanding is that ASA is both significantly more expensive and also harder to print.

Great video :)

A simple solution to make the whole thing run more smoothly would be to redesign the wheels to be smoother to stop them digging into the grass. Obviously this would be at the cost of grip but on flat terrain at such slow speeds that shouldn't be an issue. I would round the edges of the wheel significantly and make the contact patch with the ground a lot narrower to help with the turning

Please can we get more autonomous boat videos? I love all your videos but theres just something extra with the boat videos that makes them sooo enjoyable!

'A way to use planetary gears similar in size to make a huge gear reduction' I was like "wow" when I saw a gear design like this

This could be cool for monitoring volcanic zones or going places too small for a human to fit (tunnels in a factory work, ventilation shafts, caves)

You could try reversing the opposite side wheels during turns to reduce the torque you are inducing on the center of the rover.

Subscribed at the solar power/burger part.

Solar powered autonomous burger truck when? And maybe have a poke around in the ardurover code and see if you can set a minimum turn radius or something. Also if you don't have a lot of metal bearings check out Igus, which makes high-quality plastic bushings that contain their own lubricant and stuff.