3D Origami Dragon Tutorial
Тәжірибелік нұсқаулар және стиль
In this video, we are going to make a very nice 3D origami Flying Dragon, which looks very cool and is not hard to make. It's made from 424 black, 92 yellow and 11 yellow 1/64 pieces.
Check out the original model and inspiration for the tutorial - www.etsy.com/listing/22306248...
3D origami T-shirts - spreadshop-admin.spreadshirt....
⏭ TIMESTAMPS ⏮
MODEl - 0:00
THE HEAD - 0:07
THE BODY - 1:41
THE TAIL - 2:54
THE WINGS - 3:15
THE MOUTH - 7:52
THE SPIKES - 8:33
▸ How to make the Pieces - • EVERYTHING about 3D or...
▸ 3D Origami Black Widow Spider - • How to make a 3D origa...
▸ 3D Origami Rose - • How to make a 3D origa...
▸ 3D Origami Black and Yellow Swan - • How to make a 3D origa...
▸ 3D Origami Tutorials - • 3D Origami Tutorials
❗ ❗ ❗ USE GLUE FOR ALL MODELS
➖ PAPER FOR 3D ORIGAMI AND OTHER SUPPLIES YOU CAN USE ➖
🔸 US Region - www.amazon.com/shop/3dorigami...
🔸 UK Region(+25 countries) - www.amazon.co.uk/shop/3doriga...
🔸 Canada - www.amazon.ca/shop/3dorigamiv...
🔸 Germany Region - www.amazon.de/shop/3dorigamiv...
🔸 France - www.amazon.fr/shop/3dorigamiv...
🔸 Italy Region - www.amazon.it/shop/3dorigamiv...
🔸 Spain Region - www.amazon.es/shop/3dorigamiv...
➖ SOCIAL MEDIA ➖
🔴 Facebook: / 3dorigamivideos-317089...
🔴 Instagram: 3dorigamivi...
🔴 Twitter: / 3dorigamivideos
🔴 Pinterest: / 3dorigamivideos
➖ DONATE TO HELP ME MAKE MORE TUTORIALS FOR YOU TO ENJOY ➖
❤ PayPal: www.paypal.me/3dorigamivideos...
DISCLAIMER: This video and description contain affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows me to continue to make tutorials. Thank you for your support!
#3dorigamivideos #3Dorigami #3DorigamiDragon
Пікірлер: 128
Check out this 3D origami Black Widow Spider as well - kzread.info/dash/bejne/ZGuuu9ibicnaZ84.html
@azucenagarcia6813
4 жыл бұрын
3dorigamivideos where do you find A4 paper it’s so HARD to find .
@3dorigamivideos
4 жыл бұрын
@@azucenagarcia6813 There are links in the description to some paper that is good for 3D origami, just choose the link that is for the country you are living in.
@rbfromuae
2 жыл бұрын
@@azucenagarcia6813 just cut a a3 in half
@aungmyintthan6810
Жыл бұрын
lee
@cristiangutierrezsaravia4195
Жыл бұрын
@@rbfromuae jjjj
Yassss success! It ligit took me 16 hours straight, no sleep, approx 10 minutes in the bathroom, to finish this, and just eating while making pieces, and drinking occasionally... but I did it! And it’s only my second 3D model! Tysm!
@3dorigamivideos
3 жыл бұрын
So glad to hear your success story, keep up the good work!
@amethyst354
3 жыл бұрын
3dorigamivideos omg hi! Also how long approx does something like this take you real time? I’m curious
@3dorigamivideos
3 жыл бұрын
@@amethyst354 Well I would say about a day with making the pieces.
@amethyst354
3 жыл бұрын
3dorigamivideos whoaaaa nonstop?
@3dorigamivideos
3 жыл бұрын
@@amethyst354 Yes, the pieces should take me 3-4 hours and assembly with glueing the model 2 hours probably.
Awesome flying dragon design. Great skill and talent . Super 👍😍
Beautiful work! I wouldn't even think about doing this without glue.
fantastic model and a clear video - thanks!
(note to self) HEAD: Black - 31 Yellow - 4 BODY: Black - 74 Yellow - 5 TAIL: Yellow- 7 WING 1- Black - 158 Yellow - 37 x2 MOUTH: black - 3 Yellow 1/64 - 1 SPIKES: yellow 1/64 - 10 Total number: Normal pieces: 514 1/64 pieces: 11
@ggooddpross2609
3 ай бұрын
❤
Holy ur mad crazy man it took me 12 hrs non stop making pieces
Круто! Дуже гарний дракончик! Я рада бачити що культура модульного оригамі ще жива! Дякую вам за цього гарненького дракончика і чудовий настрій.❤️❤️❤️❤️
Cool! Maybe I will try with purple and blue in stead of yellow and black... I have never ever tried 3d origami before... I'm so exited!
Thanks you very much bro this is the most coolest 3d I saw on KZread five stars
very awesome, i followed your instructions, and now i have another cool origami figure!!! TY
Worked out super well. I love the result🤎🥰
So cool! Im almost done with it!
but how do we get the pieces like what's the different between normal and 1/64 pieces?
@williammiranda9296
Жыл бұрын
See this video kzread.info/dash/bejne/lKKd1MuEepXOfKQ.html. Its help me soo much.
Thank you for the video, I made this in 2 days. You're much faster! Much appreciated. Gonna be a great gift.
@3dorigamivideos
3 жыл бұрын
Glad that you enjoyed the video and the final result turned up well! If you want to showcase your model, you can send it to me on my Instagram and appear in a "community models" story
the description says i should use glue on all my models but i dont know where exactly, is it on every layer or some specific parts? as the video doesn´t say it i supose is on every layer but don´t want to overglue the model :(
@franny6945
2 жыл бұрын
so far, I have made the body of the dragon and I have been using hot glue for underneath. i make portions of the dragon make sure it's right then I glue .
lots of hours but it was fun to complete. for the final touch i ended up mounting LED lights to the dragon.
@J4N3thesecond
7 күн бұрын
Sick idea
This is the best thing i have seen so far
@travelloverjisaan2152
3 жыл бұрын
gg
what is the cm of 1/16 cm2?
Where do you find how to make it
Cutted pieces or full sheet?
This guy did so much hard work for this so I subscribe for him and like this video
How do you also think of these ideas?
Its amazing origami
How to do the pieces??
acabei de fazer esse, usei papel reciclado e as asas ficaram muito pesadas 😅, mas não têm problema se ele não sair da minha estante
hey, bro tell me the size we don't know the size what you have used.
Very nice 👌👌👌keep rocking 👏👏👏
I like it so much with it, but only the yellow ones are 1/64 or the rest of the colors?
@3dorigamivideos
4 жыл бұрын
Hello, you need only 11 yellow 1/64 pieces which are for the spikes and one for connecting the mouth. Hope this helps!
@beeindustry2136
4 жыл бұрын
@@3dorigamivideos Thank you
How much yellow is that?
So cool only problem is i dont have the amount of patience to do this
very beautiful 😍
How did you made those triangle shaped thing?
what is a yellow 1/64?
Do we need to curve the 1/64 papier?
Boa noite queria que esplicasse o passo a passo seria interessante, obrigado
Thank you so much for the video, also I wanna do it but I don’t have black paper , will it look good if I did it with white and yellow instead???
@franny6945
2 жыл бұрын
i don't know if this helps but im using 4 different colors and its coming along quiet well
Q foda 😀👏🏻👏🏻👏🏻👏🏻
Ooooooooooooooooooooooooooops 😮😮😮😮😘😘😘👌
What do you mean with 1/64 ?
@hakankestir3052
3 жыл бұрын
It is 1/64 of a standart A4 paper
PERFECT!!!! THANKS MEEEN
Cuantas hojas de cada color necesitaré?
4:45
Beautiful💕💖🎉♥️💗❤️
@3dorigamivideos
3 жыл бұрын
Thank you!
I like it❤
Hi bro Can u show me how to make these all small pieces in video As u have not showed how to make those small pieces
Are normal pieces 1/32 or 1/16?
@3dorigamivideos
3 жыл бұрын
Hi, normal pieces are 1/32 size.
@hakankestir3052
3 жыл бұрын
Thanks, just started making it :D
wow
Cuantas hojas se ocupa para todo ?
What is 1/64 in cm
I love this idea
How do i make the second wing?
@MsBluebot
Жыл бұрын
It’s the same as the first just backwards kinda
How to make the pieces
Does it require Glue pls respond fast
Ik this is a stoopid question but are the black pieces supposed to be 1/32 I'm new to this idk pls reply fast
@MascPrincess
9 ай бұрын
Cry
3:23
@jasio2441
2 жыл бұрын
?
Great great!
Masomenos cuántas piezas se necesitan😣
OMG That's a RAXIORE DRAGON
yellow and black modules of what size?
@3dorigamivideos
3 жыл бұрын
The size of the pieces are 1/32 of an A4 sheet of paper, except for the spikes on the back which are 1/64 as mentioned in the video.
4.45
You should have made legs of the dragon
thought there werefeetbut still cool though
What size paper size you
@Relaxe_sleep
4 ай бұрын
A4paper
Estaría bueno que lo hagas más lento
Please make the small parts
Can I made this with a newspaper ❓⃢❓⃢❓
THE WINGS 5:16
how to make the triangles
@3dorigamivideos
3 жыл бұрын
Hi, there is a link in the description of the video, hope this helps!
@pablorivera3138
3 жыл бұрын
just look up how to make 3D origami units
1/64
abi o ufak kağıtları nasıl yaptın
Please make it fold origami
How about make a wolf
What is 1/64?
@Angyy20
7 ай бұрын
I don’t understand same :/
Cuales son las medidas? En centimetros
How make pieces???😭
I make it :)
mais combien il faux de petite origami noire et jaune🤔🤔🤔🤔🤔🤔🤔
The pieces is burn to the dragon
Que significa 1/64 -11
Data alot of pieces
Make a phoenix plzz
mine keeps falling apart
Please make me a sowd please
Gg
Idk how to make the spiky things
Very fast... ;(
@JjN899
7 ай бұрын
Slow it down💀
lee