363 Mustang idle. Anderson N-113hl cam.
Автокөліктер мен көлік құралдары
Just wanted to follow up and do a side by side of sorts to the video I made with the 306. Same headers, X-pipe, and Spintech mufflers. As you can see the Q-16 fuel is already starting to take it's toll on the Mufflers. That's a rust cloud when it fires.
Пікірлер: 593
Sounds like ball bearings in a coffee can rolled down a steep hill, that is a sick sounding cam! Awesome! Love it!
@vibrant93
4 ай бұрын
Ha! Mind if I steal that one? Never heard the analogy before but would love to use it! Appreciate the comment. The Anderson hydraulic roller cams have their place. They work!
See I'm a seriously die hard import(Japanese) fan but DUDE. How can anyone not love a sweet ass foxbody. Seriously. To me, it ain't a real fox unless it sounds like THAT! Great cars, love them and have mad respect for them!
@vibrant93
7 жыл бұрын
Thanks man! A car guys is a car guy the way I see it. Lot's of cool stuff out there!!
That thing sounds pissed off. Love it.
@vibrant93
9 жыл бұрын
Lol, usually it's pissed off more than it's happy!!
@The05ZX10R
9 жыл бұрын
vibrant93 Awesome car my friend I could sit and listen to that idle all day long.
@joeyvoyles5548
5 жыл бұрын
It should it's 14.1 compression
my favorite sounding engine. you have a wonderful car man, truly built it well. sounds great and looks good.
@vibrant93
7 жыл бұрын
Hey, I really appreciate that! Thank you.
@melaniecorriveau7505
7 жыл бұрын
best sounding sbf on youtube
LOVE the cackle of those mufflers
That is a nice looking and sounding vehicle. I tip my hat to you sir!
Man great set up, everything is nice and neat, nothing looks half ass. Great sound too.
Dude - When ever I'm having a bad day, I listen to your motor!!!! Nice and thanks for the video.
@vibrant93
6 жыл бұрын
Ha-ha Thanks man!
Bringing this video back. Car sounds good. Stumbled across this video several years ago. And always come back to it
@vibrant93
5 ай бұрын
Thank you!
Sounds amazing !!.. Sounds like it's ready to rumble !
This badboy sounds healthy. I love the high compression with that cam. Heard about those mufflers but never ran them. Nice setup, very clean.
@vibrant93
9 жыл бұрын
Thank you! The Spintech's are a nice muffler. They have a very raspy note to them if that's your thing.
Very jealous of the new motor, almost exactly what I want to do to mine in the future. Not that it doesn't already sound wicked but bullets would sound even better. Keep it up!
@vibrant93
10 жыл бұрын
Thank you. No need to be jealous but stick to your guns so I can be that of yours! You are 100% correct in your bullet statement. They do sound pretty good if you ask me :) Just wish I could get the neighbors on board!
@jytux9014
10 ай бұрын
Did you ever end up doing it?
If i ever get ED i just have to listen to this start up. No blue pill needed.
Nicest sounding car on KZread bud. Seriously congrats
That thing sounds like the space shuttle Atlantis. Nice 👍
Damn!!! Extremely beautiful!! Props on the interior it looks car show quality. Working on my to look similiar.
@vibrant93
10 жыл бұрын
Thank you! It see's a show here and there so I try to keep things up. Good luck with your build!
Always liked the videos of your car..Reminds me of my buddy Paul Dishroons car..
Sounds absolutely amazing
small block Ford power!
Car sounds beautiful notchbacks are the best
OMG!!!!!!! The car sound amazing!!!!!!
Damn nice! Fox body is the best. Chevrolet guys are jealous! Great job bro!
@vibrant93
7 жыл бұрын
Lol, thanks for the complements! To think anyone would be jealous of my stuff, is humbling.
What a gorgeous fox.....image how it would sound with tailpipes. Oh mannn !!!!! Awesome 🇺🇸🦅🇺🇸🦅
@vibrant93
5 жыл бұрын
Thanks man! Yeah, tail pipes could be interesting.
sounds sick as hell in a good way
@vibrant93
8 жыл бұрын
+Brian Balazs Thank you!
Damn!!!!!! Enough said! I he a 92 restored unit but got plan sick! Great job
@OGbrundle
7 жыл бұрын
.....wut
This sounds stuuuupendous! Not a ford fan but anybody who calls themselves a car enthusiast can like something about this car.
Nice car, coupes are getting so hard to find in clean rust free condition. I have a gt but im looking for a coupe to put my stuff over into. I am gonna build a low compression stroker, a big bore 347 to be exact to use with my turbo setup. Great job with the car.
Such a beautiful car and a nasty pissed-off beautiful sound..👍🏾🤘🏾
@vibrant93
5 жыл бұрын
Thanks man!
Very nice car very detailed and neat!
@vibrant93
8 жыл бұрын
+polymomen thank you!
That thing sounds wicked 👍🏼
@vibrant93
7 жыл бұрын
Thanks Bud! Id be lying if I said that it isn't fun!
Holly hay bells Batman that’s one nasty mustang
It basically came down to reliability for me. I love rowing the gears and am probably going to miss it a ton but I just know it's going to break parts if I keep the 5 speed in there. I still think the suspension is ok. We had some really hot, muggy, non power making days late this summer where I was able to finally get after the car. My ARB was a little off with the added weight in different places up front which was causing the car to pull. When it doesn't spin it goes straight now.
Oh man.. This thing sounds wicked... Need to see some runs with it..
spintech ftw! :D sounds good dude. cant wait for the new 1/4 videos
That 'Stang sounds VICIOUS!
congrats an blessing on the marriage man an as always nice car.
Bad ass notch dude! Very intimidating at a stop light with that! I have a 93 notch with a blower and because of the sound of the blower everyone thinks you wanna race. Nice notch tho..she's a keeper!
@vibrant93
10 жыл бұрын
Thank you, I really appreciate it! I know what you mean about a car sounding good and everyone wanting to "see it go." Again, thanks!
wow. that thing sounds so good!
@vibrant93
8 жыл бұрын
+adam roberts Thank you!
WOOOO....that thing sound NASTY!!! I mean that in the coolest sense of the word. ;) Damn thats nice!
@vibrant93
9 жыл бұрын
Thanks bud! I appreciate it.
Sounds more them bad ass good clean car man
@vibrant93
8 жыл бұрын
Thank you!
Sounds awesome! Do you have the part number on the Spintech mufflers?
the c4 so much rpm drop between will you need more gear to ramp rpm, and keep you in the powe?
Thanks bud! You wont be dissapointed. A big bore turbo has big potential.
It's a 26x10" stiff wall e.t. drag. Wheel is 15x10 with a 6.5" backspace.
They are the originals! Back when Spintech first showed their face is when I bought them. They didn't have the different styles back then.
Sounds wicked. I love it.
@vibrant93
6 жыл бұрын
Thanks man!
Nice Job, very crackley
meanest sounding street car on yourube, nice job man!
@vibrant93
7 жыл бұрын
Thanks bud!
@JoelFJB
Жыл бұрын
@@vibrant93you ready to sell it yet??
Would it be possible to get a build list of your engine? I've been flipping through your videos and I'd like to build one similar. I've looked up a lot of what you've mentioned. Wouldn't happen to know someone part numbers? Thank you. Have a good day.
Any new updates?Followed the car for the past decade.Very nice work.
Nice and a wicked low idle.
This thing sounds badass!
@vibrant93
7 жыл бұрын
Thank you!
Love this car sounds nice looks nice is nice !
@vibrant93
8 жыл бұрын
+CLPATTERSON Thank you! It's my pride and joy.
Fuck I love the way this car sounds
Thank you! I really don't know what I'll do with the Spintechs. Probably throw them in a corner or give them away after seeing the rust ploom when I watched this video! Rear tire is a 26x10 E.T. Drag on a 15x10" Prostar.
Sweet ride ,sounds great
@vibrant93
9 жыл бұрын
Thank you, I appreciate it!
I have a 1992 fox body GT with a ROUSH 342 small block! Yours sounds a tad meaner than mines. Long live the fox bodies!!!!!
@vibrant93
7 жыл бұрын
I'm jealous of Roush power! Mine might sound good but I bet yours runs better.
Sounds awesome! What you gonna do with the Spintechs? Also what size rear tire? Cant wait to see some 9 sec timeslips!
what's the part number on the spin tech??
very clean build!!!!!
@vibrant93
10 жыл бұрын
Thanks!
Can you please post a link on where to buy those mufflers! I need these in my life lol
Nope. I finally picked up a c4 a couple weeks ago and it came with a UCC converter so I need to send that in to get re-done and then we shoud be good to go. I'm not sure if there will be enough time yet this fall or not.
she sounds awesome!!!!!
I'm still trying to figure out the car. Maybe it's me just getting old but I can't seem to figure out why the addition of 150hp to the wheel from the old 306 feels so different. Again this past weekend I had the car out and I can't keep it straight. This car has never been un-stable in 4th gear. Now it feels like I'm on a sheet of ice!
Tried to watch your new upload but says it was removed.
That's a nasty cam 👍🏻👍🏻👍🏻
@vibrant93
8 жыл бұрын
+Isaac Lund She's got some duration that's for sure.
What Spintech mufflers do you have
Sounds badass nice car !
@vibrant93
10 жыл бұрын
Thank you!
What mufflers are those!? They sound sweet
I was expecting a typical B303/Flowmaster sound. ** *HOLY SHIT* ** !!!!!!!!!!!!!
Man does cover it Damn nice son
gorgeous!
I'm with 88gt. Can't wait to see 1/4 video!!!!!!
God damn that sounds good
What water pump are you running on that? would it have the option for heater hoses?
@vibrant93
10 жыл бұрын
It's a Meziere WP311B (B=blue). Yes, it does have the option to run heater hoses. The barbed ends screw into it. I don't run heat so I used the supplied plugs.
What gives you that idle popcorn sound is it just the cam or the combination of the cams and heads ?? Music to my ears
@vibrant93
9 жыл бұрын
I'd say the cam and compression. Thanks man!
Bad ass ride man sounds nasty. Quick question.. what brand of valve covers are those..?
god damn I love this car
@vibrant93
9 жыл бұрын
Thanks!
Compression Cackle!!! gotta love it!!
@vibrant93
7 жыл бұрын
Ha-ha, glad i'm not the only one hooked on compression!
@MrMan_47
7 жыл бұрын
14:1 you are a sick puppy!! haha
@vibrant93
7 жыл бұрын
Mr. Man There are a lot of 302 parts on this 363. Had to find a way to make power somehow!
Kind of reminds me of a two stroke outboard idling in the beginning of this.
What size tires you running and backspace on the front and rear
@vibrant93
3 жыл бұрын
In this video the rear tires were a 26x10s Mickey Thompson E.T. Drag. Wheels were 15x10" on a 6.5" backspace. I cant remember which tire I had on the front but I do remember it being a metric radial of some sort. Wheels were 15x3.5" on a 1.5" backspace. I have a 1" shorter A-arm on the front so there was a 1" spacer on the front wheel in this video.
that sounds amazing
@vibrant93
9 жыл бұрын
Thanks man!
Anderson knows ford's 👍
Hey I'm wondering did your car go quicker or faster in the 1/4 whenever you switched from 5speed to a c4. Thanks
@vibrant93
4 жыл бұрын
I never did get a clean pass with the 5 speed so I guess the answer is yes to both.
What size tires are you running? Front and back if you don't mind.
@vibrant93
7 жыл бұрын
The fronts were whatever the VW beetle uses as a stock tire size. There was a company that made a metric radial that fit the 15x3.5" wheel just perfectly. For the life of me I cannot remember the size or name of the company though. I currently run a bias ply front tire. The rears were 26x10(s) M/T E.T Drags.
What et have you ran with it?
Hey Vibrant , Thanks for sharing that video with us. The car is beautiful and sounds awesome.Now......I really hate to ask because Its probably already been asked and answered but......... If you don't mind sharing what headers are you using? I'm assuming Long tubes but what size primaries and what size x-pipe? 3 inch 3 1/2? Also lastly which Spintech mufflers? Oval's , Squares? Spintech has so many different mufflers....They are split in to Race and also street series , bullets , sportsman's and Eliminators etc. etc. I think that your coupe is one of the best sounding Fox bodies Ive ever heard and well hell they say that "‘Imitation is the best form of flattery’...With that said Id love to flatter you LOL. Thanks man
What the specs on that cam?
What is your compression? Sounds high
sounds pretty nice!!
@vibrant93
10 жыл бұрын
Thank you!
Man they sound sick, which ones are they?
good way to wake up the neighborhood
@vibrant93
7 жыл бұрын
Absolutely!
Is thr bullets mufflers louder than the spintechs?
@vibrant93
10 жыл бұрын
Yes, the bullets are a lot louder!
What intake manifold is that if you don't mind me asking? I see lots of people running it.
@vibrant93
6 жыл бұрын
Trick flow Box-R.
Is it possible that the "rust" cloud is really orange soot from MMT in the race fuel? I don't know the chemical makeup of q-16 fuel, but I know when people use additives with lots of MMT, it makes an orange soot over everything in the exhaust
@vibrant93
7 жыл бұрын
Every since I've put the bullets on the car it doesn't do it so I'm going to say no at this point. However. My mid pipe and headers are now starting to get their asses kicked by this fuel. It's such a double edge sward. Can't wait to see what the engine looks like this winter when we pull it apart.
@Cryptic1911
7 жыл бұрын
I just did some reading on that stuff.. didn't realize it was so corrosive! damn
@vibrant93
7 жыл бұрын
Cryptic1911 Oh yeah, it's crazy stuff. Just got back from the track and pumped the tank. It was pretty sweet when I spilled an ass load on my leg. Probably just dropped about 15 years on the life expectancy.
What headers are you running on the 363? Did you go larger when you moved up in cubic inch.
@vibrant93
9 жыл бұрын
Actually no, I stayed with the same bbk 1 3/4" headers that I ran on the 306. They are the same heads so I figured why change? I do have a true 3" ball collector on them.
Impressive. High compression and the right camshaft can make music......lol
Beautiful car.
@vibrant93
6 жыл бұрын
Thanks man!
Did you have any fitment issues with the headers when going from 5speed to the c4?
@vibrant93
6 жыл бұрын
The o2 bung (which I have plugged) on the drivers side basically touches the trans pan. You wouldn't be able to use oxygen sensors with these headers and a C4. Other then that, no. The BBK's fit better around the C4 then a Lakewood bell housing.
This sounds badass
@vibrant93
6 жыл бұрын
Thanks man!