SUPER UNDERRATATED BRO!! love your energy and the build man!!

@TALONATER

3 жыл бұрын

Thanks bro 👍

Car looks so sick! Glad to see you take care of it

@TALONATER

4 жыл бұрын

Thanks bro 👍

I love you man. Such a good guy. Keep posting on your 350 bro such a legend.

@TALONATER

2 жыл бұрын

Thanks bro 👍

Hope all is well with you brotha. Your vids are appreciated man 👍🏼

@TALONATER

3 жыл бұрын

Thanks bro hope things are going well with you as well 👍

Great to see you back bro! My aircon blower motor blew this morning and it's hotter than a nun's jockstrap outside :(

@TALONATER

4 жыл бұрын

😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂

You are such a legend my bro

@TALONATER

2 жыл бұрын

Thanks bro 👍

Very good content bro...cheers for Canada!

@TALONATER

3 жыл бұрын

Thanks bro 👍

Good to have back 🤙

@TALONATER

4 жыл бұрын

Thanks bro 👍

Z looks badass!! I'm always messing with mine. My neighbors probably think I'm crazy obsessed with my car. And they're absolutely correct!!✊

@TALONATER

3 жыл бұрын

😂😂😂😂😂

hope the Zs doing well and you to man :) love the vids man they've been and are helping me with my build and just learning my car. hope all's going well in life.

@TALONATER

3 жыл бұрын

Thanks bro and good luck with your z 👍

@TheRobphobos

2 жыл бұрын

@@TALONATER Will you be doing any more vids bud ? Hope all is cool !

@TALONATER

2 жыл бұрын

@@TheRobphobos negative blew my back out

@TheRobphobos

2 жыл бұрын

@@TALONATER Oh man, sorry to hear that - wishing you a full, healthy recovery !

@TALONATER

2 жыл бұрын

@@TheRobphobos thanks bro

Hi there, great videos as usual, this may be a dumb question but engine wise, does this relate to the VQ30DE also. Much love from the Caribbean

@TALONATER

3 жыл бұрын

I'm a little confused about your question this video is about seibon carbon fiber review

When u going to post a next video , want to see more of the z man. Ps love the videos

@NoDidddy

3 жыл бұрын

He has suffered trauma to his back, simple comment checks.

gotta add more videos brother! miss seeing top notch content

@TALONATER

4 жыл бұрын

Thanks bro just been super busy and super broke ☹️

oh you have a lovely Z! Found you from the things you shouldn’t do bcos I’ve had a Z for 3yrs just that hi haven’t used it really until now, when I’m fixing it back up

@TALONATER

3 жыл бұрын

Good to hear man 👍

Nice, I love this car I want one sooo bad 😂 I love the build tho 👍

@TALONATER

3 жыл бұрын

Thanks bro 👍

So fuckin dope and unique. Can’t wait to see you go boost😉

@TALONATER

4 жыл бұрын

Thanks bro 👍

Hey brother I’ve been watching your channel for a long time love your content I have some question so I have a project 350z 2005 and I want to delete all the airbags how will I go about doing this on stock ecu idc if they light pops up on the dash but if I remove the stock seats steering wheel and side pillar air bags and remove the module will The car still run? Or will I need a stand alone ecu?

@TALONATER

3 жыл бұрын

Yes sir your car will start up and run just fine bro all you will get is a light on the dash 👍

Best part of Seibon hoods is they're all carbon fiber. iirc, the cheaper sub 1k msrp hoods are only carbon fiber skinned fiberglass. Gotta love quality

@TALONATER

4 жыл бұрын

I 100% agree bro 👍

I saw in one of your other videos that you've got some type of 2 point harness bar. i was wondering where you got it? or if you made it yourself, how could i do the same? Also your videos really help me out in terms of figuring out my new 350z, and examples of what my z could become. thanks!

@TALONATER

3 жыл бұрын

That's called a k harness bar I bought it from enjuku racing but I modified it it used to have four points on it but I cut off the two that bolted to the 350Z rear sub floor since I didn't have that anymore and made it bolt to the sides at just two points 👍

@Hudsonl_

3 жыл бұрын

@@TALONATER Thank you so much!

@TALONATER

3 жыл бұрын

@@Hudsonl_ anytime bro 👍

Miss the uploads bro hope your doing good !

@TALONATER

2 жыл бұрын

Thanks bro 👍

Yeah us car guys spend so much money for all that cost of carbon fibre you could of brought a second 350z in the UK de 2006 is about 3k super cheap but that's because fuel is huge expense. But it does looks really cool. But i personally couldn't justify the cost. Keep up the content you should do a full build cost of your z. Also nissan have said there's going to be a new z.

@TALONATER

4 жыл бұрын

Thanks for the idea on the full cost of the build that would be a good video I also heard the word about the new z as well bro I'm so excited 👍

Nice video! Do you have low pressure struts for the hatch?

@TALONATER

2 жыл бұрын

Lol no sir there's no struts on the hatch at all bro you must not watch my videos lol

I miss your channel man, you still making content? How is the Z? Almost 10K subs here, this channel has so much more to grow.

@TALONATER

3 жыл бұрын

No bro I haven't posted in a year man lol I blew my back out a year ago I can't work on the car anymore 😞

@slittinghisthroat

2 жыл бұрын

Hope you make a speedy recovery!

@TALONATER

2 жыл бұрын

Thanks bro 👍

any idea what the car weighs now? also, for the roof id suggest an x brace for rigidity, unless you're gonna cage the car.

@TALONATER

4 жыл бұрын

kzread.info/dash/bejne/p4t_2LOpd6u6ZZs.html here you go bro enjoy and I do eventually plan on adding a roll cage 👍

beautiful, dude. not my cup of tea, but great for show. there's no way I could put up with fragile body panels like that. I might consider the rear hatch and the hood in CF. also Seibon doesn't deliver residential so what did you do there?

@TALONATER

2 жыл бұрын

That's not true seibon does deliver residential bro how else would I have my entire car covered in carbon fiber lol obviously you don't order directly through them you go through another company 👍

Where did u get the front bumper from Im loving it 👏

@TALONATER

3 жыл бұрын

It's the OEM bumper bro I just cut it up and created that 👍

Welcome back... The Z still looks amazing.

@TALONATER

4 жыл бұрын

Thanks bro 👍

Miss you man

@TALONATER

3 жыл бұрын

Thanks man I miss making videos too bro 👍

hey you didn't mention the rear wing. I really like the one that you put on there would love to know where you got it what the brand is.

@TALONATER

2 жыл бұрын

It's just a duckbill from eBay bro 👍

Quick question when your Z is fully warmed up where does your oil pressure gauge read at ? Mine sits at 15psi is that normal ?

@TALONATER

3 жыл бұрын

I'm pretty sure mine sat at around the same as yours is at idle fully warmed up but I don't have an oil pressure gauge anymore since I put the new 370Z dash in there 👍

Hey have you noticed any vibrations from the spl bushings you put on about a year ago. I heard the compression rod and lca bushings start to knock a lot after 4 months or so I’m about to buy some so if you could let me know that would be great the. z is looking sweet now

@TALONATER

4 жыл бұрын

Thanks bro and I have to really really put the car in a bind like entering a steep hill to get the compression rods to slightly knock other than that they're whisper quiet 👍

@baileykaz99

4 жыл бұрын

thatbluezguy thanks alot ill order mine now

@TALONATER

4 жыл бұрын

@@baileykaz99 nice hell yeah bro 👍

The antenna weave being different is cooler

@TALONATER

4 жыл бұрын

Thanks man 👍

please do a video of how the car sounds really like to hear this beats !

@TALONATER

2 жыл бұрын

Just look through my channel brother there's tons of videos on how it sounds also what is a beats 😂😂😂

@Zworld-bs2nv

2 жыл бұрын

@@TALONATER ohh crap i didn’t see those😂 i meant beast ^^ didn’t even realize i said beats my bad😂

@TALONATER

2 жыл бұрын

@@Zworld-bs2nv it's all good bro I'm just messing with you 👍

I remember in one of your other vids you said you got a mail in tune from z1. Just wanted to get your honest opinion on if it's worth it? By the way keep up the content. Love your channel

@pntbllbxr

4 жыл бұрын

Did the mail in tune for my z... 100% worth it 👌

@adamnejad6250

4 жыл бұрын

@@pntbllbxr thanks for the input. I live 5hrs from z1 and was weighing the 2 options, 800 dollars for dyno tune. Opposed to 400 for a basic mail in.

@TALONATER

4 жыл бұрын

I have zero regrets it literally transformed my car into a beast bro 👍

@TALONATER

4 жыл бұрын

@@pntbllbxr 😎 👍

@TALONATER

4 жыл бұрын

@@adamnejad6250 yeah that's a huge price gap and 5 hours is a long drive man 👍

Super awesome mean machine 👍👍🇬🇧🏆Ron uk 🇬🇧🇺🇸🇬🇧🇺🇸

@TALONATER

4 жыл бұрын

Thanks bro 👍

Would a kinetix manifold fit under a stock DE hood without the throttle body?

@TALONATER

4 жыл бұрын

Absolutely without any issues the manifold doesn't sit high the throttle body does 👍

Finally something different!

You need to do a full mod list body engine and all

@TALONATER

3 жыл бұрын

No way bro 80 grand in this car it would take me months to research everything that's on that car I don't even remember half the stuff lol

@jonathanr1840

3 жыл бұрын

@@TALONATER 😂😂 I respect the honesty thank you

@TALONATER

3 жыл бұрын

@@jonathanr1840 anytime bro 👍

Did you ever notice your floorboard getting hot? After driving about 20 mins it feels like my feet are sunbathing lol. I hope you have a speedy recovery as well!

@TALONATER

3 жыл бұрын

Thanks bro and yes with the stock catalytic converters they are literally right below your feet 👍

Man I love your build. Sooooo expensive tho 😂

@TALONATER

4 жыл бұрын

Yes it is bro 👍

Dude…..where did you go? It’s been a year sense your last video…..I can’t say much I have not posted for 8 months either. Just food for thought…. You have the lightest Z I’ve ever seen as a street car, why don’t you boost it … I think lots of people would be very interested in seeing the lightest Z with a ton of boost. I just boosted mine it’s super easy, and if you need my Tune file Or any help I can hook it up. See you soon 😎👍

@TALONATER

2 жыл бұрын

What's up bro glad to hear you boosted your z man unfortunately for me I blew my back out and I can no longer work on the car sucks but that's life bro I had a lot good times with my z car probably going to sell it soon ☹️

You should help me fix my Z 😂 I’m having many issues with it and I’m sure you could help me

@TALONATER

3 жыл бұрын

I will absolutely help you bro what are the issues you're having?

I'm sure I've seen carbon door handles been done on a zee before.

@TALONATER

4 жыл бұрын

I've seen covers but no true handle replacements unfortunately ☹️

Hey bro i got a 350z manual my problems is that i can't rev it pass 3k i dont know whats going on ive all ready on my 3rd cam sensor just on the passenger side check the timing is correct i just can't find the problem Yet it still throughs the code for the passenger side cam sensor even though its a new one

@TALONATER

3 жыл бұрын

It sounds to me like you're stuck in limp mode bro I had that happen to me twice but I just turned the car off and let it sit for a few minutes and started it back up I eventually got a tune and never had that issue ever again you might want to consider that 👍

@kilalamadness

3 жыл бұрын

@@TALONATER thanks for the info ill keep that in mind fingers crossed

@TALONATER

3 жыл бұрын

@@kilalamadness good luck bro 👍

I honestly don’t know if I’m digging enough or what. But I want to delete all airbags, airbag modules, and connectors I’m on a stock ecu (passenger deployed there for the reason of me wanting to remove them all since it’s a “race car”) anyways how do I go about removing them and no run into any issues, codes, or not running any knowledge will help thank you and please

@TALONATER

3 жыл бұрын

It's just as simple as removing all your airbags and connectors and the SRS ecu also just make sure you disconnect the battery before you do anything you also will not get any codes the only issue you will have will be a seatbelt light on your dash and if that bothers you I have a way for you to get rid of the light as well 😎 👍

@themoneymanmechanic0119

3 жыл бұрын

@@TALONATER thank you so much you have very crazy build much love man

@TALONATER

3 жыл бұрын

@@themoneymanmechanic0119 thanks bro 👍

Where do I buy carbon fiber parts for the350 z

@TALONATER

2 жыл бұрын

There's literally a million places on the internet to buy carbon fiber parts there's no one specific Place bro

Yo when are you going to make more videos

@TALONATER

3 жыл бұрын

Covid bro no job no money ☹️

Will the carbon fiber door work with the interior that’s on the stock door?

@TALONATER

3 жыл бұрын

Yes the only thing I had issues with are the door seals for some reason with the door seals on the doors had a lot of trouble closing and would not close easily it took a lot of pressure so that's why I just left them off 👍

If i were a sandwich i would be peanut butter and jealous!!!!

@TALONATER

4 жыл бұрын

😂😂😂😂😂😂😂

Hello thatcarbonzguy 😂

@TALONATER

4 жыл бұрын

😂😂😂😂😂😂😂

Those rubber seals are a pain in the ass. I have to reglue mine 4-5times a month during the summer. The driver's side A pillar is about to fly off now. The B pillar has flown off before and the one atop the hatch was $1100 and useless. Glue on hot metal....bad idea

@TALONATER

4 жыл бұрын

I agree with everything you said 100% bro such a terrible design from Nissan ☹️

@willk3807

4 жыл бұрын

I hate opening my carbon hatch too. Pull on the handle with one hand. Jam my fingers in the crack above the tail light

@TALONATER

4 жыл бұрын

@@willk3807 😂😂😂😂😂😂😂

Hey man I’ve found carbon fiber A pillars! Full replacements not cover!

@TALONATER

2 жыл бұрын

Yes sir I found a and b pillars full replacement not a cover but I'm not paying the prices anybody wants for that stuff 👍

@laytonlemay1223

2 жыл бұрын

Honestly there cheaper then OEM, so that’s the route I’m going.

@TALONATER

2 жыл бұрын

@@laytonlemay1223 right on bro 👍

Hey man, i was wondering, do i need an uprev software to tune my car? Or i can just buy a lisence without the software when im ready to tune? I have a 2003 350z DE with bolt on modifications! Thanks

@TALONATER

4 жыл бұрын

Again are you tuning yourself?

@alexmassie361

4 жыл бұрын

thatbluezguy i have no experience with tunning, im trying to get it tune by a prefessional!

@TALONATER

4 жыл бұрын

@@alexmassie361 then you just need to buy the license and have it installed are you having Z1 Motorsports do it?

@TALONATER

4 жыл бұрын

@@alexmassie361 Are you having the ECU shipped off or are you having the car Dyno tuned?

@alexmassie361

4 жыл бұрын

thatbluezguy ok cause i don’t have anything now like no software nothing, with my civic SI 8th gen i had to buy a flashpro wich is the software that cost 800$ before dyno tunning, do i have to do the same with the Z or just buy a 400$ license amd go to a dyno tune?

How much faster would you say your car is now from gutting it and going full carbon compared to when you 1st got the car.

@TALONATER

3 жыл бұрын

I'm not sure how to answer that but going by feel it feels significantly faster 👍

@fairladyzed3157

3 жыл бұрын

@@TALONATER Cool, I'm thinking about doing some weight reduction on mine. I was just curious if you noticed a big difference in your acceleration or anything. I hope you're doing well bro, i miss your uploads. Have a good day

@TALONATER

3 жыл бұрын

Thanks bro you have an amazing day as well 👍

Hey man where've you been? I was thinking to myself I haven't seen a video from you in ages. Hope all is going well man!

@TALONATER

3 жыл бұрын

Sorry man I blew my back out I can't work on the car anymore sorry 😞

@joker32127

3 жыл бұрын

@@TALONATER Nooooo! I hope you are doing better man! Hey man rather you be in good health than get worse while trying to work on your car. So what's the plan with the channel now?

@TALONATER

3 жыл бұрын

@@joker32127 Honestly I don't plan on posting anymore the channels pretty well done although I will still always help people with any questions they have 👍

@joker32127

3 жыл бұрын

@@TALONATER The true legend. Dang man, sad to see you go. Been following the z build for years now. But hey glad you'll still be around man! Thanks for entertaining me over these few years man!

@TALONATER

3 жыл бұрын

@@joker32127 Thank you so much for all the kind words bro I really appreciate it man means a lot to me and I'll always be on social media if you ever need me bro👍

Hope your ok bro, you haven't posted in awhile!

@TALONATER

2 жыл бұрын

Blew my back out can't work on the car anymore ☹️

We’re do you get your carbon fiber from ?

@TALONATER

3 ай бұрын

I can't remember the company it's been so long but I'm sure I mentioned it many times in my videos or in the descriptions

Where did this guy go???? Is he okay? No post in a year.....let's get a vid broski!! Be well!

@TALONATER

2 жыл бұрын

Sorry bro I blew my back out no more car videos 😪

@DarikStone

2 жыл бұрын

@@TALONATER Damn man, hope you're okay. I love this channel. Maybe you could switch it up to do car talk or something. Are you permanently down?

@TALONATER

2 жыл бұрын

@@DarikStone yes sir I'm permanently down I could do talking videos but I'm moving on bro maybe start another channel in the Future non-car related but always be here to answer your questions bro 👍🏻

@DarikStone

2 жыл бұрын

@@TALONATER damn man, I'm sorry to hear this.... I hope you stay well. I look forward to hearing from you in the future if you create anything else.

@TALONATER

2 жыл бұрын

@@DarikStone thanks bro 🙏

Where you at man?

@TALONATER

3 жыл бұрын

Sorry bro with covid my job loss and blowing my back out man I just can't work on my car anymore 👍

post more !!!!!’

@TALONATER

3 жыл бұрын

Covid bro broke no job ☹️

you ever gonna post again?

@TALONATER

3 жыл бұрын

Scroll through the comment section bro it's been asked and answered a million times bro 👍

Man where you at? We ain't seen you in ages. Hope your good.

@TALONATER

3 жыл бұрын

Sorry bro I blew my back out I can't work on the car anymore 😞

@tmusson151186

3 жыл бұрын

@@TALONATER ahh sorry to her that man. Get well soon from the UK.

@TALONATER

3 жыл бұрын

@@tmusson151186 thanks bro 👍

time to change the channel name to thatcarbonzguy lol

@TALONATER

4 жыл бұрын

That's funny I been hearing that for about 2 years now from ALOT of people 😎 👍

Any new updates on the z?!

@TALONATER

3 жыл бұрын

Covid bro sorry man no money ☹️

miss your videos😔

@TALONATER

3 жыл бұрын

Sorry bro 😞

How much weight did the carbon save you?

@TALONATER

3 жыл бұрын

kzread.info/dash/bejne/p4t_2LOpd6u6ZZs.html enjoy bro 👍

Cool video how much do you think the car weighs now?

@thedoghandler1

4 жыл бұрын

His wallet will be litter

@TALONATER

4 жыл бұрын

@@thedoghandler1 😂😂😂😂

@TALONATER

4 жыл бұрын

kzread.info/dash/bejne/p4t_2LOpd6u6ZZs.html enjoy bro 👍

@amirzahir6995

4 жыл бұрын

thatbluezguy thank you!

@amirzahir6995

4 жыл бұрын

thatbluezguy damn that shits light

6 months ago???

@TALONATER

3 жыл бұрын

🤔

Wassup man no new vids for ages would love a vid of ripping in carbon Z BTW whats the weight nowadays ??

@TALONATER

3 жыл бұрын

Sorry bro with covid I'm broke no job man it's been rough for a while

@lordzed83

3 жыл бұрын

@@TALONATER o shiot man sorry to hear u ever weighted Z with all em carbons on ?? Im fucked mysself even worse kinda. Due to lockdowns in uk my appoitments at doctors got cancelled and my health detoriated to level im almost disabled. MIR scan tomorrow cause gotten to point some days i cant evend dive my Z... But UK here i get full sick pay ect ffor 6 months and so on.

@TALONATER

3 жыл бұрын

@@lordzed83 oh damn bro that's so sad to hear I'm literally dealing with the same thing man I blew my back out and I can't work anymore I haven't worked for almost two years and it's the same with me I can only drive my Z maybe once every three to four weeks I just can't ride in there because it hurts me too bad if you don't mind me asking what issues are you dealing with health-wise?

@lordzed83

3 жыл бұрын

@@TALONATER whole skeleton problems back neck ect started frpm back rest went with it. You know how it is... I dont enjoy driving much tbh. So i know the score :/

@lordzed83

3 жыл бұрын

@@TALONATER you know best motoring Drift king quit pro driving cause of back also?? :/

Update on the car?

@TALONATER

3 жыл бұрын

Still going strong bro covid has everything messed up I'm broke ☹️

do door panels not fit?

@TALONATER

Күн бұрын

?

What type of front bumper is that?

@TALONATER

3 жыл бұрын

It's the OEM bro I just hacked it up and created it 👍

@High-Tower12

3 жыл бұрын

@@TALONATER that's fire. I couldn't find it anywhere. Even the way you put the support bar is fire.

@TALONATER

3 жыл бұрын

@@High-Tower12 thanks bro it took a massive amount of planning and time to get everything right I even had to flip the front bash bar upside down so that it would be centered perfectly to look a lot better 👍

@High-Tower12

3 жыл бұрын

@@TALONATER bro, that was my next question. That bar is fire too. It doesn't get in the way of the intake ducts. And it's color matched the color of my hr. If you were close, I'd pay you $$$ to do that for me.

@TALONATER

3 жыл бұрын

😎 👍

You gonna make any more content man?

@TALONATER

3 жыл бұрын

Negative bro I blew my back out I can't work on the car anymore 😞

@Backendchase

3 жыл бұрын

@@TALONATER permanently ??

@TALONATER

3 жыл бұрын

Yes bro permanently 👍

Are you still with us?

@TALONATER

2 жыл бұрын

Yes sir 👍

When are you going to turbo / build your engine? Carbon fiber stuff is over priced when you barely get any performance out of the weight reduction of it. All the parts are aluminum already.

@TALONATER

4 жыл бұрын

As for the boost I'm not sure yet bro but your comment about carbon fiber being overpriced I agree however getting no performance out of ditching all that weight I completely disagree stock my car was over 3,400 lbs and now it weighs 2660 that's a 900 pound weight loss bro and you don't think I gained any performance lol yes the stock parts are aluminum but I still managed to ditch 900 pounds 👍

@Lolatyou332

4 жыл бұрын

@@TALONATER that 900 LB isn't just from the carbon fiber, you removed a lot more stuff than just replacing those pieces. The only pieces I could see worth replacing with carbon fiber are the doors and the hatch, but it puts you at risk without putting in a roll cage.

@TALONATER

4 жыл бұрын

I agree with the roll cage but I also cut the rear quarter panels and the roof out so I wasn't just adding back weight 👍

@Lolatyou332

4 жыл бұрын

@@TALONATER I'd say add a roll cage and get a vortech supercharger, tune it, target a little less than 400 whp until you get forged internals. That is about best thing you can do on a 350Z without building or swapping the engine.

@TALONATER

4 жыл бұрын

there's no way I'm boosting without building the internals there's a million videos on KZread of people blowing up there 350Z's supercharging them first and running low boost ☹️

How much was the whole cost?

@TALONATER

3 жыл бұрын

Right around 7k 👍

hey buddy, where did you disapear?

@TALONATER

3 жыл бұрын

Hey what's up bro sorry man with the whole covid job loss and blew my back out I just don't have money and can't really work on my car anymore 😞

@orangekitties44

3 жыл бұрын

@@TALONATER stay strong dude hope you are recovering quick and get working soon

@TALONATER

3 жыл бұрын

@@orangekitties44 thanks bro that means a lot to me 👍

Did you quit youtube?

@TALONATER

3 жыл бұрын

I blew my back out and I can't work on the car anymore 😞

@WadeSuave

3 жыл бұрын

@@TALONATER ah, sorry to hear that man, i just got my z and have been modifying it these past few months and your videos have alot of useful and helpful information

@TALONATER

3 жыл бұрын

Thanks man I appreciate it bro and I'll always be here anytime you have any questions 👍

Have a custom shop in Mooresville NC Looking to do a full carbon swap

@TALONATER

3 жыл бұрын

Nice bro hell yeah 😎

@tedcomfort3532

3 жыл бұрын

@@TALONATER looks like i'm in for some fun

@tedcomfort3532

3 жыл бұрын

@@TALONATER have a duraflex widebody kit i'm throwing over it toying with the idea of using the pieces as molds to copy in carbon might be too labor and precision intensive for me but i'm just now really investigating it otherwise the weight loss willprobably be good enough without going crazy trying mold new they're pretty light

@TALONATER

3 жыл бұрын

@@tedcomfort3532 yes sir

@TALONATER

3 жыл бұрын

@@tedcomfort3532 oh man that's going to be a lot of work bro but would be really cool and be worth it cuz you can say that you made your own carbon fiber however do you have any experience with making carbon fiber molds?

What’s the weight?

@TALONATER

4 жыл бұрын

kzread.info/dash/bejne/p4t_2LOpd6u6ZZs.html enjoy bro 👍

@joeguinness8951

4 жыл бұрын

Crazy light man lighter than an s2000

@TALONATER

4 жыл бұрын

@@joeguinness8951 yeah it's insane bro 👍

Hey man Where you been lately, hope you’re ok

@TALONATER

3 жыл бұрын

hey what's up bro I'm good man I just blew my back out can't really do much on the car anymore and with the whole covid and no work just making it that much more difficult thanks for checking in on me though 👍

@silksdetailing

3 жыл бұрын

@@TALONATER fair enough man, just wanted to check in and make sure you’re ok. Hope to see you back on the tube soon.

@TALONATER

3 жыл бұрын

@@silksdetailing thanks bro 👍

I love you man, you’re a great guy and have an amazing car but. Can you change that fucking intro no one needs to hear your car ripping my ears to shreds every video

@TALONATER

4 жыл бұрын

😂😂😂😂😂😂😂😂

4th xD