Quick video for anyone looking to remove and re install 350Z door handles.
Жүктеу.....
Пікірлер: 38
@zroberts64992 жыл бұрын
Awesome video, was able to change mine out in about 30 minutes. Thank you for the help!
@therealjessescheel
2 жыл бұрын
Glad it helped! ☺️👍🏼
@ohnaviity23 күн бұрын
video helped a little. just make sure the 2 metal pieces are clamped in properly then also make sure you put the handle bottom then top, there's a stopper at the bottom that causes gap
@skatepvp22022 жыл бұрын
You’re funny you need more subscribers !
@briannava7962 жыл бұрын
Thanks a lot man💯🔥
@kevindoesntgiveahoot3555 Жыл бұрын
Genius idea with the magnet! Knowing my luck I would've had to go fishing
@choops23732 жыл бұрын
thanks!
@drewcantskate9469 Жыл бұрын
Preciatchuu 💯
@mattpipke5716 Жыл бұрын
Thanks. I have an 07" 350Z in solar orange and my passenger handle is broken, so I ordere3d and have a set of new handles. I think since I am not painting them, I am going to only install the passenger one for now and save the other in case it ever breaks. What did you use to paint or wrap your arm rest on the interior side of the door? mine are all original and of course all peeled and flaked, I did get some vinyl to wrap them, but I have never wrapped anything so I haven't messed with them yet, but I saw yours and like the look, is that paint?
@therealjessescheel
Жыл бұрын
Rustoleum truck Bedliner. I have a video on it if you search the channel for “interior paint”
@toddr69923 жыл бұрын
I have a 350z convertible and the driver handle needs replaced. There are 3 extra bolts to get at the 10mm bolt for convertibles. I can’t seem to remove the bolts! They seem to be locked on. Any tips? Thank you!
@therealjessescheel
3 жыл бұрын
Sorry I am not familiar with the convertible door handles. I am surprised they would be different.
@Rubbernecker2 жыл бұрын
Nice!
@therealjessescheel
2 жыл бұрын
Thank you! 😎
@MALopez19834 жыл бұрын
Hey Jesse how is the Amazon handle?Worth it or best go OEM?
@therealjessescheel
4 жыл бұрын
Hey man. It is fine. In one of my earlier videos I talk about it a little more. Basically it does not look as good as OEM but functions fine. Here is the video where I installed the amazon handle and talk about it a little more. 2:00 minute mark kzread.info/dash/bejne/op2ptrtmpceYobw.html
@josediazasmr60143 жыл бұрын
Hey Jesse , if my door handle doesn’t have your connecting rod can I make my own ?
@therealjessescheel
3 жыл бұрын
I suppose you could. Why doesn’t it have the connecting rod though?
@sheldonmedina540 Жыл бұрын
Hey Jesse, I followed all the directions and my door Handel still won’t work, do you think the blue hole could possibly be broken ?
@Tommikegetitright101i Жыл бұрын
Where did you get the new door handles from? Put the link please
@350yuni
3 ай бұрын
Amazon
@DatBoiSigz3 жыл бұрын
Do you have to roll down the windows?
@therealjessescheel
3 жыл бұрын
No. Just make sure your door is unlocked when you start.
@rlucas74553 жыл бұрын
I used an expired credit card and bent it enough to make a catch when removing the 10 mm screws.
@therealjessescheel
3 жыл бұрын
Brilliant! 😎👍
@linkiller76253 жыл бұрын
where can i get the retainer from my door didnt have it
@therealjessescheel
3 жыл бұрын
Nissan dealer maybe?
@linkiller7625
3 жыл бұрын
@@therealjessescheel got it from Z1 Motorsport
@stevepike1230 Жыл бұрын
Anyone know the part number for the lower bolt? Yup. Dropped it inside. Don't want to take it apart to fish for it.
@kahliltucker3841
Жыл бұрын
Naa the size is a m 6 .1 some like that lol
@daleester44703 жыл бұрын
Aaaaaaaacccccctuuuuuaaaatooooooooooooooooooooooor
@therealjessescheel
3 жыл бұрын
Ah yes. Actuator. My bad! 🙂
@trillgee74753 жыл бұрын
I fixed my door handle but now every time I turn the car off the both windows roll all the way down
@therealjessescheel
3 жыл бұрын
Not sure whats going on there. The door handles should be independent of anything with the windows.
@maric.997
4 ай бұрын
Maybe not entirely so? Because when you put your key into the hole and push it and hold it to the left, the window goes down
Пікірлер: 38
Awesome video, was able to change mine out in about 30 minutes. Thank you for the help!
@therealjessescheel
2 жыл бұрын
Glad it helped! ☺️👍🏼
video helped a little. just make sure the 2 metal pieces are clamped in properly then also make sure you put the handle bottom then top, there's a stopper at the bottom that causes gap
You’re funny you need more subscribers !
Thanks a lot man💯🔥
Genius idea with the magnet! Knowing my luck I would've had to go fishing
thanks!
Preciatchuu 💯
Thanks. I have an 07" 350Z in solar orange and my passenger handle is broken, so I ordere3d and have a set of new handles. I think since I am not painting them, I am going to only install the passenger one for now and save the other in case it ever breaks. What did you use to paint or wrap your arm rest on the interior side of the door? mine are all original and of course all peeled and flaked, I did get some vinyl to wrap them, but I have never wrapped anything so I haven't messed with them yet, but I saw yours and like the look, is that paint?
@therealjessescheel
Жыл бұрын
Rustoleum truck Bedliner. I have a video on it if you search the channel for “interior paint”
I have a 350z convertible and the driver handle needs replaced. There are 3 extra bolts to get at the 10mm bolt for convertibles. I can’t seem to remove the bolts! They seem to be locked on. Any tips? Thank you!
@therealjessescheel
3 жыл бұрын
Sorry I am not familiar with the convertible door handles. I am surprised they would be different.
Nice!
@therealjessescheel
2 жыл бұрын
Thank you! 😎
Hey Jesse how is the Amazon handle?Worth it or best go OEM?
@therealjessescheel
4 жыл бұрын
Hey man. It is fine. In one of my earlier videos I talk about it a little more. Basically it does not look as good as OEM but functions fine. Here is the video where I installed the amazon handle and talk about it a little more. 2:00 minute mark kzread.info/dash/bejne/op2ptrtmpceYobw.html
Hey Jesse , if my door handle doesn’t have your connecting rod can I make my own ?
@therealjessescheel
3 жыл бұрын
I suppose you could. Why doesn’t it have the connecting rod though?
Hey Jesse, I followed all the directions and my door Handel still won’t work, do you think the blue hole could possibly be broken ?
Where did you get the new door handles from? Put the link please
@350yuni
3 ай бұрын
Amazon
Do you have to roll down the windows?
@therealjessescheel
3 жыл бұрын
No. Just make sure your door is unlocked when you start.
I used an expired credit card and bent it enough to make a catch when removing the 10 mm screws.
@therealjessescheel
3 жыл бұрын
Brilliant! 😎👍
where can i get the retainer from my door didnt have it
@therealjessescheel
3 жыл бұрын
Nissan dealer maybe?
@linkiller7625
3 жыл бұрын
@@therealjessescheel got it from Z1 Motorsport
Anyone know the part number for the lower bolt? Yup. Dropped it inside. Don't want to take it apart to fish for it.
@kahliltucker3841
Жыл бұрын
Naa the size is a m 6 .1 some like that lol
Aaaaaaaacccccctuuuuuaaaatooooooooooooooooooooooor
@therealjessescheel
3 жыл бұрын
Ah yes. Actuator. My bad! 🙂
I fixed my door handle but now every time I turn the car off the both windows roll all the way down
@therealjessescheel
3 жыл бұрын
Not sure whats going on there. The door handles should be independent of anything with the windows.
@maric.997
4 ай бұрын
Maybe not entirely so? Because when you put your key into the hole and push it and hold it to the left, the window goes down