The 327 ruled the small block world from 1962-1967 for sure. Just the mention of the number 327 got my immediate and complete attention. The last one I owned was in a 68 Chevelle wagon. It had the hi-pro 327 factory in it. I had that car from 1980-1985. It was very reliable.
@borowskirace
6 ай бұрын
You would appreciate the back-story. Joyce inherited her father's Corvette after it had sat for 15 or so years. For sentimental reasons, she wanted it restored to exactly as it had been and with the original parts to the extent possible. The restoration shop sent us the engine and it was a mess. We had to air hammer the pistons out of the block. Amazingly, the block cleaned up well on our 4-axis CNC and we were able to re-use it. This thrilled Joyce. We did convert it to a hydraulic roller cam as they would not be a visible change. It was great to save a piece of history, especially one with such a strong emotional tie. To this day, this remains one of my favorite projects.
@adamalback4005 жыл бұрын
Love the sound of that 327! My favourite of GM's small block chevs. Great work on the rebuild guys! Cheers, from Australia
@borowskirace
5 жыл бұрын
Thank you Adam. That remains one of my favorite jobs. The owner inherited her father's Corvette after it had sat for twenty years. She wanted the car as original as humanely possible. We had to air hammer the pistons out of the block. When disassembled, the engine looked like a hopeless pile of junk. Fortunately, it proved to be salvageable. It was great to be able to save it and help her preserve her father's memories and legacy.
@donshotrodgarage17172 жыл бұрын
Sounds like a kilker! Nice job👍
@aurktman11063 жыл бұрын
Love the 327’s! Yours sounds healthy!
@josephhewes89314 жыл бұрын
Gotta love the older American Iron. I have a 1969 large journal 327 in a '69 Camaro, stout little motor !
@naj5338
4 жыл бұрын
Benji Hughes you can stroke the 327 large journal just like a 350. Better to keep it as is since it's a rare engine.
@brooklyncarsandcoffeehealt43295 жыл бұрын
Very impressive💪Sounds great👍 Congratulations✌
@borowskirace
5 жыл бұрын
Hi Mike, thanks for your comments. This remains one of my favorite builds. A woman inherited her fathers Corvette and wanted to keep it as original as possible. The problem was that it had sat for more than a decade unattended. When we opened up the engine it was a disaster. Nevertheless, we set out to save it. Frankly, we were not optimistic that it could be saved. Happily, the engine block in the video is the original, numbers-matching block. Check out this video clip of our guys air hammering out the pistons: www.flickr.com/photos/borowskirace/12818596233/in/album-72157641574828805/ Bottom line, one very happy customer!
@brooklyncarsandcoffeehealt4329
5 жыл бұрын
@@borowskirace I'm Glad it Work out, Amazing Story♡☆☆♡Merry Christmas to u & Loveones and a Healthy 2019 to All.
@shawnmike225 жыл бұрын
Love it I have a 327 in my 66 impala
@DennisAllen-oy7gi2 ай бұрын
Building one right now withroller rocker double hump 202s that's been ported and hardened seats with flat tops so I can actually run it. Going in 57 vette that I have owned since 1982. It'll be better than 283 that was in it.
@rogerw21016 жыл бұрын
Love it I got a 66 300 HP 327 that was in a impala
@bcastro2798
5 жыл бұрын
What mpg do you get?
@randybarnes84544 жыл бұрын
My kind of engine.
@tylerdixon32907 жыл бұрын
wow that 37 is a screamer!
@racer676 жыл бұрын
Awsome! Sounds like mine the one i have in my 67 impala!
@johnbeer5242
5 жыл бұрын
Speed Racer stappp lying😂
@megaeverything1015 жыл бұрын
it can pull more rpm then that
@franciscohuerta98604 жыл бұрын
wat bearings n rings did u used 4 the rebuild?
@matthewrose45013 жыл бұрын
Needs more carb and spin it higher. Will make 350 easily
@jeffcolt91854 жыл бұрын
How much torque does that engine make??
@paulmallery67193 жыл бұрын
Get the original mechanical non vacuum 4 barrel and it will wake up
@PhillyFail3 жыл бұрын
Hey my father and I are about to restore or begin restoring our own 327. But this one is high compression and was for the Corvette or race or something what do I need to buy for restoring it like what kind of a kit
@borowskirace
3 жыл бұрын
Please email me at ken@borowskirace.com and I'll respond with the parts list. Thanks for watching.
@olderthanyoucali85123 жыл бұрын
Why a roller?, these engines can already spin at high rpms, the problem is the heads. Stock heads will always comprise performance numbers. Should have invested a little more for aftermarket heads.
@borowskirace
3 жыл бұрын
The purpose of this rebuild was not to make power. It was part of a restoration project that was intending to reconstruct a family heirloom to near original condition as a driver. The hydraulic roller cam would be maintenance-free and not visible. It's unlikely the daughter who inherited her late father's car would ever floor it and no chance she'd ever race it.
@tubedude4859
10 ай бұрын
A roller will give an engine more years than a flat tappet cam will for one thing
Пікірлер: 29
The 327 ruled the small block world from 1962-1967 for sure. Just the mention of the number 327 got my immediate and complete attention. The last one I owned was in a 68 Chevelle wagon. It had the hi-pro 327 factory in it. I had that car from 1980-1985. It was very reliable.
@borowskirace
6 ай бұрын
You would appreciate the back-story. Joyce inherited her father's Corvette after it had sat for 15 or so years. For sentimental reasons, she wanted it restored to exactly as it had been and with the original parts to the extent possible. The restoration shop sent us the engine and it was a mess. We had to air hammer the pistons out of the block. Amazingly, the block cleaned up well on our 4-axis CNC and we were able to re-use it. This thrilled Joyce. We did convert it to a hydraulic roller cam as they would not be a visible change. It was great to save a piece of history, especially one with such a strong emotional tie. To this day, this remains one of my favorite projects.
Love the sound of that 327! My favourite of GM's small block chevs. Great work on the rebuild guys! Cheers, from Australia
@borowskirace
5 жыл бұрын
Thank you Adam. That remains one of my favorite jobs. The owner inherited her father's Corvette after it had sat for twenty years. She wanted the car as original as humanely possible. We had to air hammer the pistons out of the block. When disassembled, the engine looked like a hopeless pile of junk. Fortunately, it proved to be salvageable. It was great to be able to save it and help her preserve her father's memories and legacy.
Sounds like a kilker! Nice job👍
Love the 327’s! Yours sounds healthy!
Gotta love the older American Iron. I have a 1969 large journal 327 in a '69 Camaro, stout little motor !
@naj5338
4 жыл бұрын
Benji Hughes you can stroke the 327 large journal just like a 350. Better to keep it as is since it's a rare engine.
Very impressive💪Sounds great👍 Congratulations✌
@borowskirace
5 жыл бұрын
Hi Mike, thanks for your comments. This remains one of my favorite builds. A woman inherited her fathers Corvette and wanted to keep it as original as possible. The problem was that it had sat for more than a decade unattended. When we opened up the engine it was a disaster. Nevertheless, we set out to save it. Frankly, we were not optimistic that it could be saved. Happily, the engine block in the video is the original, numbers-matching block. Check out this video clip of our guys air hammering out the pistons: www.flickr.com/photos/borowskirace/12818596233/in/album-72157641574828805/ Bottom line, one very happy customer!
@brooklyncarsandcoffeehealt4329
5 жыл бұрын
@@borowskirace I'm Glad it Work out, Amazing Story♡☆☆♡Merry Christmas to u & Loveones and a Healthy 2019 to All.
Love it I have a 327 in my 66 impala
Building one right now withroller rocker double hump 202s that's been ported and hardened seats with flat tops so I can actually run it. Going in 57 vette that I have owned since 1982. It'll be better than 283 that was in it.
Love it I got a 66 300 HP 327 that was in a impala
@bcastro2798
5 жыл бұрын
What mpg do you get?
My kind of engine.
wow that 37 is a screamer!
Awsome! Sounds like mine the one i have in my 67 impala!
@johnbeer5242
5 жыл бұрын
Speed Racer stappp lying😂
it can pull more rpm then that
wat bearings n rings did u used 4 the rebuild?
Needs more carb and spin it higher. Will make 350 easily
How much torque does that engine make??
Get the original mechanical non vacuum 4 barrel and it will wake up
Hey my father and I are about to restore or begin restoring our own 327. But this one is high compression and was for the Corvette or race or something what do I need to buy for restoring it like what kind of a kit
@borowskirace
3 жыл бұрын
Please email me at ken@borowskirace.com and I'll respond with the parts list. Thanks for watching.
Why a roller?, these engines can already spin at high rpms, the problem is the heads. Stock heads will always comprise performance numbers. Should have invested a little more for aftermarket heads.
@borowskirace
3 жыл бұрын
The purpose of this rebuild was not to make power. It was part of a restoration project that was intending to reconstruct a family heirloom to near original condition as a driver. The hydraulic roller cam would be maintenance-free and not visible. It's unlikely the daughter who inherited her late father's car would ever floor it and no chance she'd ever race it.
@tubedude4859
10 ай бұрын
A roller will give an engine more years than a flat tappet cam will for one thing