I’m taking all the notes 📝😂💯

@greaseaddiktz3217

2 жыл бұрын

Facts I wana build a single cam ek 4 door

Take a shot every time Kenny says “oh boy” 😂

@andrewdamico3787

3 жыл бұрын

got alcohol poisoning am dead now

guys breaking the bank in south africa for that block 👀

Car was re-tuned at Humble Performance a week later and put down 417whp!!!

@xMilesxHighxClubx

3 жыл бұрын

daym!

@Spudstrodamus

3 жыл бұрын

You the owner?

@anthonyfletcher4853

3 жыл бұрын

@@Spudstrodamus it's my friends car we built it together in my garage

@Spudstrodamus

3 жыл бұрын

@@anthonyfletcher4853 thanks man Alex said in the video you were at 95% duty on injectors. What pump was in it? And did you change pump and injectors when it went back I'm in the process of putting my built z6 together shooting for above 500hp it has 1000cc and a 450. I'm pretty sure I'll need more injector just looking for what you guys had in it.

@NormalGuy

3 жыл бұрын

What rods??

300 hp on a single slammer, do you know how many forum's say it's impossible lol, I love I've got a f series motor lots of fun, this video inspired me

@vtec_c1loop844

Жыл бұрын

You just need forged pistons and connecting rods, a decent turbo kit, and some new injectors.

@checkyourself164

Жыл бұрын

@@vtec_c1loop844 you don't need forged pistons, plenty of d series making 500+ on Vitara cast pistons :). You also need quite a few other things you've not listed, such as an uprated fuel pump and a tuning solution to name a couple :)

@boostedrr7205

Жыл бұрын

On f series 300hp is 100% capable they are a bigger motor than d series, plenty of people have made 300hp with just headstuds

@user-fj8wr8jh4e

3 ай бұрын

Z6s were doing 300 20 years ago lol, all day.

Man I remember a million years ago taking the air box lid off my boy's mom's EX coupe and really hearing VTEC for the first time.. That was it, been a Honda guy ever since... I do love a big ol V8 though too #Carguysarecarguys

@kaybevang536

Жыл бұрын

Imagine a V8 with Vtec i don’t know the good and bad if there’s ever a monstrosity of a setup that be ?

@rhino720f

11 ай бұрын

​@@kaybevang536there are definitely v8s with variable valve timing :) Toyota's 1uz for instance, 4.0 quad overhead cam v8 and some models had vvt-i which is Toyotas version of vtec but the non vvti engines are actually more sought after. Some big horsepower Honda builds actually eliminate vtec as well.

@rhino720f

11 ай бұрын

Same here ! I own two v8s and just bought a single cam Honda I love em all and can't ever stay away from 4 cylinders

Finally another sohc these little monsters started it all

@kennethpowers8995

3 жыл бұрын

Actually the ZC kinda started Honda off on their 4 cylinder performance route, SOHC D/F series stuff really came about because it’s so cheap and plentiful. Never really widely used for motor sports though.

@Busydadgarage717

2 жыл бұрын

@@kennethpowers8995 back in the early 90's before the ZC and then B series swaps were happening, the 88-91 Civic and CRX SI's were rocking the D16A6 and surprising people left and right due to their power to weight ratios. ZC's were definitely a huge upgrade, but I feel the A6 got it started. Just my opinion though.

I still remember you guys squeezed out 500plus hp out of the eBay gt35 🔥

Nice numbers for a single jingle! I used to have a Tahitian green eg coupe back in the day with a D16z6 and ex model.Man I miss that car.

💕👏🏽 all love for the turbo single cams

This is all I've ever wanted was a 300hp daily

@markanthonyhurston

2 жыл бұрын

for real ...

@markanthonyhurston

2 жыл бұрын

don't think I'm asking for much, maybe participate in autocross one day then daily drive the next ... nothing that a modern day turner car would be expected to do ... ( with air conditioning )

@jnino956

Жыл бұрын

I’m on the same page a 300hp daily is what I want to experience while keeping A/C and reliability I’m not even dreaming in the 500s I thinks it’s obtainable I just need to do plenty of research.

Finally a new vid!! Thanks humble!!

I'm inspired by this one ... the force is strong 💪 ... taking notes ...

Good some single cam content. If there was going to be some with my d16y8 turbo eg sedan.

Need more of these

Where's our single cam budget turbo kit?

I literally just ordered a PRB-A01 oil pump for $120 on EBay 2 days ago lol. The Type R/Type S pumps are definitely out there.

Respectfully built 💯💯💯 that's some #humbleperformance 🔥🔥

Y'all need to do more sohc fr fr

Got a bad guys stage 4 cam vitara build in the works, 450 fuel pump, 1000cc injectors hoping to make some good power on pump gas

are yall doing the budget build for d series ?

Clean 🤝

all the way from South Africa

Real nice but no what happens to the 2 step great job 👏 single jingle

Is that yellow CRX fast or what????? Are you going to do a video on that build, DANG.....

Making that juice!

Damn how u guys get ur blocks that clean

We here!

Can you guys do a compression on full mandrel bent to up pipe on the same map

CEO of “oh boy” 😂

I have a similar build... I just ordered a bigger 6062 turbo and a bisimoto 2.4 cam. My goal is 400 wheel on e85.

@tayvonrose2528

2 жыл бұрын

Can’t even get bisi cams new anymore

Do you happen to remember what engine harness was used for this? I have a z6 and trying to put in 99 civic

Can you post the videos of the turbo K20 2000 civic you got rid of in may?

Great content as usual guys. Can anything be done with the F20b6 or K20a4 engines? these are cheap here in the uk and easier to get hold of then K20,s h22,s ect. Cheers

@BrodyBrodester

2 жыл бұрын

I've got an f20 that's currently being boosted and also stroked to 2.2

Bro hagan videos en español tambien... saludos desde Venezuela bro..

It needs stiffer motor mounts, nice runs though

@robertreynolds930

2 жыл бұрын

thought it was gonna jump out for a sec!

You need more videos on d series turbo

@humbleperformance

Жыл бұрын

We have a good one coming soon !

So, did this guy run a block guard, in the d16? I ordered a GE guard for my a6z6 mini me.. Css would be like 1500 canadian.. So not feasable.. GE guard good?

How much does a tune like this usually Cost?

Can someone explain to me what boost is ima noob but trying to learn all this stuff. Like how is it installed and what does the pounds of boost mean? If someone could help me out it would help

Who did that block go to in South Africa? Was it to CAPETOWN?

could i pull something similar off with a D16V1 ?

How reliable will that be?

Friend of the guy who owns that build man is it fast

I need a complete engine block with orchards bearing 300_400 hp

Cost for building something like this?

Internals stock ?

If I hear Puerto Ricans and we around Mazdas.. toyotas or Hondas I know its gonna be a good time

What turbo is on the car?

How much will it cost me to have my z6 tune to 200hp with ebay kits?

Where can I find the parts list

@humbleperformance I'm trying to build a d16z6 and trying to make it 300hp and have it last 200,000 miles. I want it to last. How can ya help me with this build?

Is this stock top end?

Stock trans?

Wow! Build me a SOHC too🙏🏽. Never thought a sohc could make that much power... Impressed Adrian from Cape Town South Africa

@8301jarred

3 жыл бұрын

I am building another one just like it it will be for sale

Sohc ftw

I really wanna built a d16 for some reason .. Im in process of b18lsv

@jamesborek8125

3 жыл бұрын

The D-series definitely takes it back to what really got the Honda stuff rolling IMO

Anybody got a modded 2.4 accord where do you start

Man i wish these engines were still cheap 😢

I wanna see pump gas pulls. No e85

Please more vídeos boys

Oh Boy...

Would you really need 1000cc injectors on a z6 to hit 300 with a lower level turbo tho.... I would think 500 and a good fuel pump would be plenty good.... Btw I have no idea what I’m talking about, just speculation and tryin to learn

@99mustanggt09

Жыл бұрын

He's running e85 it uses alot more injector than pump gas

turbo aint doin nuthing for the level of noise. sounds na damn loud

woooah no intro music

Salúdos team humble performance me pusierón a soñar despierto y a llorar me recueda mucho a mi single cam turbo ,buen, trabajo le queso bueno de verdad con menos ponis me curraba yo a 10 lbs bone 🦴 stock corriendo 11.9 a 113 millas y despues a 117 millas costante.esi fue 🦴 stock.

@kennymercado5768

3 жыл бұрын

Dammm buenos números, que combinación tenías es que estoy haciendo una hatchback 93 turbo a ver si la pongo saludable ✍️

@juanvega7649

3 жыл бұрын

@@kennymercado5768 hola no tenia solo head studs cosmetic gasket injections 550 cc rc y emuza turbo todo de ebay motor virgEn y cabeza virgen ese carro era el dolor de cabeza de muchos y la fuel pump 240 walboro.

@juanvega7649

3 жыл бұрын

@@kennymercado5768 lo puedes check and you tube....flaco tech tuned speed quest tienen various videos de mi carro allí es un coupe rojo

@kennymercado5768

3 жыл бұрын

@@juanvega7649 gracias bro ! Vamos a ver si la ponemos a gozar!

@juanvega7649

3 жыл бұрын

@@kennymercado5768 dale , dale gracías

Anyone know the specs ?

What do you recommend i do to my d16y8 to get it to hit 330-375(maybe 400) whp, I will be doing e85, mainly Looking for help on whether I should upgrade clutch, valve springs, camshaft, connecting rods, pistons, Thanks

@miffed3584

2 жыл бұрын

you gonna need all that upgraded lmao

@99mustanggt09

Жыл бұрын

An do billet oil pump gear the y8 has weak gear In the pump

So I have a question, I have a d16y7 sohc.. and I blew it up so now I need the rebuild the bottom end, was just wondering what the best piston and rod set was considering I’m a mustang guy and never dabbled in the Honda world before😬

@alexw9498

Жыл бұрын

Max peeding rod no notch rods n 75mm vitara pistons, yes from a Suzuki you put em in backwards

@hitlersmissingtesticle69

Жыл бұрын

@@alexw9498 thank you🙌

Eso fue con ebay turbo emusa

I need a front bumper like this. Can anyone send me a link from eBay?

Cape town

I wonder what the total cost would be for these upgrades?

@Jakethysnake93

Жыл бұрын

I know speedfactory rods are around $400 and vitara pistons are $150ish, $100 for a fuel pump, prolly $200 for injectors and maybe $1000 for the turbo kit

Does anyone have a spare y8 head?

Save the sohc

Sheesh! Don't tempt me. 😂

🙌🙌🙌 #savethesohc #getbarbas10ksubs

🇿🇦 🇿🇦 🇿🇦

95% duty cycle on fuel with 1000cc injectors and only 300HP? Whats the holdback there? Fuel pressure or pump? or both?

@BoostedNW

2 жыл бұрын

oh NM i just realized e85, more fuel needed so higher duty cycle % numbers, im like wtf I got a d16 with 1000cc injectors and no where near 95% duty cycle lol

@8301jarred

2 жыл бұрын

Yea I had to upgrade my wireing from the fuel pump and I had my boosted solenoid plumed wrong but i took it back and made 420hp after I changed that stuff

@stevendecker9977

Жыл бұрын

@@8301jarred you have an Instagram? I'm building something similar I'd like to ask you some questions

D budget turbo kit please 😩😩 #singlecammatter

Oem or Aftermarket rods ?

@JD-rq7il

3 жыл бұрын

If those are oem rods, it'll make that power a few times, lol. Then it's game over.

@8301jarred

3 жыл бұрын

They are SpeedFactory no notch rods

Rods?

@anthonyfletcher4853

3 жыл бұрын

SpeedFactory racing "no notch" long rods

Find me original side lens for 89 civic hatchback si new for less than $500

Anyone out there in Honda land mess with the L-series? My daily '08 Fit has an L15a1(i think?) And while I tell myself its the daily, leave it alone.. I can't help but wonder

@gysljoel

3 жыл бұрын

from what I hear, leave it alone. weak pistons and no real aftermarket... imo

I'd like to know what rods as well. I'm doing the same setup for the most part, but using a 58/55 turbo.

@Jugg215

3 жыл бұрын

i used eagle on my vitaras

@8301jarred

3 жыл бұрын

They are SpeedFactory no notch rods

Isn't 1000 cc an overkill? wouldn't be to rich the mix using all that ccs?, integra type r is 1.8 litters but injectors are 300 cc

@batman3698

Ай бұрын

No, if 1000cc is too much you just drop the duty cycle. But this one is apparently running 95% duty cycle so using almost all of the 1000cc. That's because it's running on E85. On gaslone it could probably use a 700cc or something. 300cc would be way too small on a high horsepower turbo car.

Where’s that intro ! 😡

95% duty on 1000ccs!?!

Should easily be able to outrun a new Civic Type R in a straight line. More power, less weight, fraction of the cost.

@Spudstrodamus

3 жыл бұрын

I made 212 in my stock z6 with ebay turbokit and raced a type r with bolt on and he beat me by only 2 cars at 300 it should walk a type r

@j.feldmander1956

3 жыл бұрын

The new civic type r is a tank and only making 300hp at the crank. Not fast. Any turbo coupe or hatchback making 230hp or more at the wheels will murder a type r with ease🤘

WHERE'S THE SINGLE CAM CONTENT???👀👀👀👀

save the single cam

I'd spinner round,,,,

Why does everyone put a breather filter on the valve cover you’re supposed to put an oil catch can you’re losing the vacuum in your engine

@jgc0064

3 жыл бұрын

This car has a catch can...

That turbo too big for 300hp 😂

@_parkerjacoby1206

3 жыл бұрын

we went back and made 400

The D16Z6 & The A6 are the underdogs, the compression is so low you can turn the boost up and up and up and up

What about all this EPA regulations will you’s be still doing this

He spelt it vtech..... 🤦‍♂️

@Shuffleboy428

3 жыл бұрын

U spelled...

@RagingBullNuts

3 жыл бұрын

@@Shuffleboy428 It’s not wrong. It’s just not necessarily American text.

Damn 95% duty cycle with 1000cc injectors on e85 = 305whp I was hoping for more 🤦🏽‍♂️

@anthonyfletcher4853

3 жыл бұрын

@DaOnE51T car made 417whp on the exact same setup after upgrading the fuel pump wiring

Show the actual graph man, couldnt even tell what RPM you are getting that power at, cant see where it hits boost even, what a joke...

Great! like that ! i do on my youtube chanel 295 HP and 377 tq with an D15Z6 at 18 psi ! CIVIC DAV4WS Slip-peut on dyno if you interesting . congratulation from France !