I started watching yesterday, but I took a drink every time bushing flashed on the screen. I passed out. Excellent video very informative

Yes!!! Best $10 I ever paid on KZread. Basically paid for a JRB movie ticket

@wctrdw06

3 жыл бұрын

. XXcc C C # C XX C C C C Cc C C C XX C C C C C C. Cc c C C c C C C C C C C C C C C. C c c C C C C C C C C C C c C C C C C C C C c C C c C C C C C C Cc Cc C C C C C C C c C C C C XX XX X C C C C C C C C C C C Cc C C Ccccc C Ccccc C C Ccc C C C C C C Ccc C C Ccc Cc Ccc C Cc C Cc Ccc C C Cccc C Cc C C Cc Cc Ccc C C Cccc C Cccc Ccc C Cc c C Cc C C Cc Ccc C C Cc Cc Cc Cccc Cc c C C C C Cccc Cc C Cc C C C C C C Cc Ccc C C Cccccccccc Cc C C Cc C Cccccc Cc Cccc Cccc Cc Cc Ccccccccc Cccc Ccc Ccccc Ccccc C C Cccc C Ccc Ccccc Ccc Cc C Ccc Cccc Cccccc Cccccc Cc C Ccccccc C Cc Ccccccccccc Cccc Ccc C Cccccc Ccc C Ccccc Cc Cccccc Ccccc Cc C C Ccccc Cccccccccc Ccc Ccccc C Ccccc Ccccccc C C Cccc C Cc Cc C C C Ccc Ccc Cc Cc Ccc Cc C Cc C Cc C C Cc Cc Ccc Cc C C Ccccccc Cccc Cccc Ccc c Cccccccc Cc C C C

@opossumfpv

8 ай бұрын

I appreciate you for doing this donation over 4 years ago 🙏

Plops over an hour of video content on the table with a *meaty thwack*

Put me down as being one of the people that like long videos.

I have been waiting for these videos forever and I don't even own a 300 win mag yet

@bmstylee

5 жыл бұрын

It's an fun gun to shoot. It was my first long range gun. I have since bought a 6.5 Creedmoor and 338 Lapua Magnum. I really don't shoot my 300 win mag anymore because the 6.5 is less recoil with similar ballistics on steel targets and the 338 is just a more capable round in general.

@joeykennedy5910

5 жыл бұрын

Yeah I love my 6.5 creedmoor, but I just built a 6.5 Grendel for my long range shooting to 1000 yards.

@tomtevepaugh8833

3 жыл бұрын

@@bmstylee L

@jaythus3181

3 жыл бұрын

I like my weatherby vanguard in .300 win mag quite a bit, make sure your scope is good quality as well as the scope rings and make sure the mount job is good because if not you'll end up with a canted scope from the recoil lol. I like 180 grain projectiles the best in it but that's me, if you decide to get into it see what works best for your barrel

A JRB feature film! It’s hard to comprehend just how much knowledge is in this video all available for free. Great stuff man thanks so much!

This is fantastic, I just got myself a Bergara b-14 ridge in 300WM, this is all great stuff! So much useful information for my own journey down the rabbit hole of reloading 300wm. I'm reloading 180gn nosler Accubonds with 79 gr of ADI 2217, which is the ADI equivalent of H1000, after much of your advice and tips, I've successfully not blown my face off. I love your channel! keep the 300WM videos coming!

I found the "bushing" to be fantastically hilarious. Every time it flashed up, I laughed. Thanks for that.

@jeffkessel2440

2 жыл бұрын

@Joe Chance He spends his money testing things so we don't have to. I appreciate it.

I just bought my 300 win mag yesterday then came home and hopped on your channel. I was very dissapointed you hadn't covered it then low and behold this morning this popped up. Love your channel.

Watched this from start-to-finish. One of the most educational channels on KZread.

Great video. Professionally done. The longer video was a great Xmas gift...love em. You do good work.

That’s a lot of information to take in. I may have to watch this a couple times. Thanks for taking the time to make a video of this magnitude.

I've avoided the bushing dies up to this point. Getting bushing die info along with 300 win mag reloading info is a real bonus! Thanks! Excellent as always!

An hour and thirty six in your humor got to me, thank you for the dedication and work you put into this along with your humor.

Reloading the 300 win mag is going to be my summer project..

I can’t wait to see more from this gun! Thanks for the videos!

I had to watch this video all over again. Great video! Lots of thought, incite, and detail to what you need to pay attention to when reloading 300 win mag. I’ll probably watch it again and learn something new from it each time 😃👍🏻 thanks for sharing!

Thanks for making this one! I'm in the same boat about not needing a 300 Win Mag but, I won one so here I am. I really enjoyed all your videos so far and I'm sure this one will serve me well.

Love the looong videos! TY!!! 👍👍👍 I load 7mm RM & learned about the area above the belt. Great die & a mandatory next purchase for me. I don’t want to make this a long comment, so I’ll “collet” good here.

@gardnerwebb3749

4 жыл бұрын

Thanks for the laugh😆🤜🍻⚜️

I do not shoot 300 win mag but it is a JRB video so I watched it all. There is something to learn no matter what. As always some good shooting also. PS: I would watch a JRB video on how to make a soup sandwich

@dougfaloon3501

5 жыл бұрын

AZ2VET o

I've heard a lot of people saying a lot of different things as far as belted magnums and the bulge around the belt. I'd love to see a long term review of two different lots of brass one using the Larry Willis collet die and the other using standard full length sizing dies and see what the results are. Thanks for all the awesome videos and the info you provide.

@stevemiller6044

3 жыл бұрын

It would not be long term. After a few firings you cannot chamber belted brass without the Willis collet die.

I can’t believe that not only have a watched this long video once, I have now watched it many times. An outstanding video and my favorite video on KZread!

This was excellent ! Thanks for doing it 👍 Can’t wait to see parts 2 & 3.

I'm glad you elaborated on the neck sizing portion as that was what I was most confused about and you cleared it up. Great video!

Just getting into the 300WM myself and I loved this video very much. Thank you sir!

Still relatively new to reloading and just getting into long range precision. So much learned from this video, you really did cover everything. Thank you

Fantastic video on .300 Win Mag reloading. You covered ever detail really well and provided more information than some others if they did a 10 hour video! Great work! I took the liberty of taking a "screen shot" of some of your information. Glad you did not "blow your face off" in this process but that was really funny! Great work! Thanks much!!

I've used your videos as a reference for a while now. Just picked up and RPR in 300 WM and your page was the first place I looked for reloading info. Thank you for this video.

Wow, this is one of the most informative videos I have ever watched on youtube. Also, you did great work editing - you have a great pace and delivery. I can't stop cracking up every time I see "BUSHING!" pop up at the top of the screen :) Nicely Done!

I've been shooting the 300 win mag 30+ years, been reloading it for 20+ years. Shot most everything from gophers to grizzlies. From 15 yards to an elk at 890 yards. It just works. My reload recipe is what really works in my riflr. Winchester modle 70 classic s/s with a boss.(first one in Canada ) 24 inch barrel, +boss 73 grains 7828 powder Win./ fed brass Win. Mag primer 200 grain seirra game king Average 2960 fps ( 10 shot average ) Full lenth resized and trimmed every time. Some cases reloaded more than 6/7 times. Hunting in the East Kootanys Canada.from the bottom lands to top of the Rockies. It works.

I started watching this morning and had to finish it after work and some 6.5 Creedmoor brass prep. Great stuff though. I always enjoy your long videos. They are very thorough.

Super excited for this video series

Thanks for the great review of our Belted magnum collet resizing die ! Great video overall as well !

This video was awesome. I'm just getting into 300 Win and you literally covered every facet. I never used bushing dies and I think you made it very easy to understand. Job well done

I have never found the need for commenting on a you tube video, but you are absolutely amazing. This is one of the best, most intelligent, interesting and educating videos I have ever seen. Thanks a lot for the time and effort you have put inn to making this video. Best regards from Norway.

It's like you could read my mind from all the way across that pond! Been mulling over a 300 wm really interested in this vid.

@fondelmaddick5085

5 жыл бұрын

I'm a Brit, and I've owned one for twenty years. I've just had it rebarreled. I'm on deercontrol7@gmail.com

Nice video. I watched the whole thing. Very interesting as I'm also just starting to explore reloading my .300 Win. Mag in a Ruger M77. Loved the DIY OAL case length hack. Definitely going to make some. Awesome. Thanks Johnny!

Excellent content for the family of belted magnum calibers. I like that you've got an "index" at the beginning of your video. Thank you!

Brother you got me into reloading virus , thank you for this educational channel ! Happy holidays !

@chrismartinez8393

5 жыл бұрын

It only gets worse as you keep reloading. Welcome to the reloading ODC class. The only known cure it to pull the lever on a once a week basis. 😁

@marcrobert2603

5 жыл бұрын

reloading is the true perpetum mobilae. The more you learn, the more questions.

Great video. Cant wait for the future findings!

Just starting to reload, enormous amount of data. Thank you for sharing.

I been reloading for 30 years... and I learned something today.... thank you

Love how your pile of dies has grown since you started this channel!

Excellent video, been waiting for it ever since you mentioned the rifle in the 6.5cm video.

Excellent information. This is the best and longest video I have ever watched on KZread.

THANK YOU SO MUCH!!! I have been having accuracy issues with my Remington 700 but the 220g SMK load is AMAZING!! Thank you!!

Great video with lots of detail!! I use a lee collet neck die which takes out all the guess work out of neck tension and sets it at a perfect 0.002" tension no matter what. I just bump the shoulder a little with a full length die first. I have never had to bother with the special belted magnum die, but mainly think that is because after a half dozen firings the primer pocket goes before i have that issue. I do believe that just moving the shoulder back a little and cheating by "head-spacing off the shoulder" also reduces the issue. Someone chime in and correct me if i'm wrong. But i've maybe had 3 cases that failed to chamber after loading and shooting about 1000 rounds of 300 win mag in two different rifles. Again for me after 5-6 firings on Remington brass it gets tossed because the primer pockets are loose. I don't push the limits but i do load a 300 win to the potential it was designed for. Cheers!

300 Winchester magnum is the reason I want to start reloading lol! So happy I ran across your series! :-) loved the reloading and grouping information from the range. Tell me a lot about some of the Hornady ammo I have been shooting....great video. Thanks for making!

Thank you for the great video. More long videos please.

I don’t even own a 300WM, but really enjoyed this video. When I saw an hour long video drop last night I got crazy excited lol Might go buy a 300WM barrel for my DTA now :)

This is perfect for me. I've got a Rem 700 heavy 24" barrel that shoots pretty well. I can't wait.

Man do I love these long videos.

Man oh man, a cup of coffee and some coffee cake and an almost 2 hr jrb it’s gonna be a good day

I just watched the whole thing and didnt even realize it was that long. Great info at a steady pace (it may help that I watched it at 1.5 speed).

"Go jump in a lake." That alone was worth the almost 2 hours! Way to go JRB!!!

I will forever remember that live stream and being a part of it as that all rolled in. So excited to see this work out, since I'm going to be setting up to shoot my Rem700 .300WM in Eastern WA where shots can get WAY out there... met a lady that dropped a whitetail at 642 yards, lasered, last year with her 7mmRemMag and Leupold BDC-elevation turret. Can't wait to see the finale of the Mark 248 Mod 1 series like you did with the Mark 262 Mod 1 series (which was FANTASTIC!).

Very thorough. Well done.

Cheers mate. Great video. First ever reloading video. Now I have a baseline understanding.

Its movie night. "What's playing", Johnny's reloading.

Love the long form, you were due for one.

this has been a very useful and educational video John

Great vid! really looking fwd for 300WM updates. I just started reloading 300WM myself and like you this is my 1st belted round. I am making a USMC M-40A5 clone with the Rem-700 long act in 300WM. So it will look like the M-40A5 but chambered like the Army M-24. I got to play with a M-40A5 thanks to a buddy in weapons Co. when we were at Quantico.

Awesome to finally see a win mag video, I have been testing loading 300 win mag as well, so far varget and rl-17 behind a hornady 150gr fmj are showing promise with no pressure signs. I am using a Winchester XBR.

Loved it! Perfect example of matching the angle of the throat to the angle of the bullet ogive. Having those perfectly parallel makes for the best accuracy. That and jump seem to make magic. Spinning the completed round with a drill and polishing with four "O" steel wool will eliminate any burrs and remove any gunk from the surface of the projectile.

I really enjoy the longer videos.

Thank you for the info Johnny. This video gave me a lot of educational info. Really interesting. It proves how much factory ammo is not going to cut it if you want really close groups. The further out you the worse the groups can get. It looks like the Sierra Match King stuff really holds well. I know Hornady stuff works well too. However some guns plainly don’t care for some ammo. Keep up the videos please. Really instructional.

excellent vid ,lots of good info .keep them coming if you can.thank you .

Very helpful. I shoot the tc compass in 300wm.. I’m personally going to try out the 220smk.. I love this rifle, it’s killed a few animals now, but like most, terrible grouping. I’m new to reloading so this video is something that’ll be super super helpful for making my gun shoot well. And you basically just showed me what this gun needs. So thank you for that. I know my starting point

I've been waiting for this for a long time

I am speechless after watching this entire video. This video is 100% quality, pretty sure I'm ADD and I was able to watch every second of this, so congratulations on that LOL. Whatever you do for a living, stop it because this is your calling. If this was on American Idol, you would get the golden buzzer no doubt. I recently purchased a Tikka T3X Super-lite 300 Win Mag and I just love shooting it at the range but purchased it for Elk and Moose hunting and with Hornady Precision 200 grain ELDX ammo I am able to produce sub 1 inch moa @ 100 yards. I am wanting to reload for myself and that is why I ended up here. Thank you much for taking the time and sharing this with us all, I completely enjoyed it.

Youve made me interested in reloading and the control you have over most aspects of the entire firing process

Outstanding video. Thank you for taking your time to do it. Take care..

I pal of mine (former Military!) Has let me shoot his .300 Win. It surprised me because it felt so similar to my .30-06 ! He said these are tailored hand loads! The 150 gr. Hornady bullets at 2900 fps. MV. This fellow likes to do the "soft" loads for our local "Medium Game". Deer, Pronghorn and little Blackies. But then, goes up for power and accuracy for Elk. And on occasion Moose in Alaska. That seems like a very versatile way to use your big, belted magnum!

@uraniumpenetrator3844

4 жыл бұрын

That's what makes this a great cartridge. It'll shoot bullets from 110gr.-240gr. very well. Options are the great thing about reloadig.

Love the video new at reloading will be watching your videos from now on thank you

Just found this playlist after buying my own 300 win mag. I live in KY too but I'm hoping to use it out west. Figured i might as well use it for deer hunting here too so i can be used to it. Thanks for this series!

Discovered your channel via Alabama Reloader. I find your content very educational and look forward to viewing some of your previous videos. I'm reloading 6.5 Creedmoor and .280 Remington on a Redding press.

That "distance to lands" tecnique in order to set a good OAL to start from it's a very good one. Thanks for that and the other things i'm sure i didn't retain 😂

You are helping me with my only belted mag, now I understand...thanks

Good thing I was off today. I'd have been pissed if I had to wait all day to watch a new JRB video :)

Nice video or documentary the best I ever saw . A master piece

A lot of great content!

25 yrs of reloading 300s for my winchester, Ive never run into an issue of expansion at the belt. I also only neck size, now that Ive said that.............. great video, thx

I load alot of belted mags and never have I had this issue, and I always look as to the max, I’m on my fifth firing on my 7mm rem mag and still going strong

Excellent video. Thanks!

Slowly becoming my favorite KZread channel

Great video I really enjoyed it. Thank you.

Thank you for such incredible content.

What a great vid I enjoyed every second of it I shoot 300wm and I learned a few things thank you very much for your time atb👍

Excellent information, thank you.

Always great content !

Great video and detail as well

After watching this video, I have subbed. I'm looking into the winchester XPR in 300 win mag or 338. Great video, man!

Thank you so much for the awesome content i have a win mag and am getting into reloading I learned so much thank you again

I just started to run bergers in my 300 Win. I might be a little barbaric, but I run a long bullet then back it off till the bolt just closes. then I take a mesurment. then back it off .015 to .020" off the lands. Then, reduce the powder 3gr and work back up. ( first time I had a sticky bolt when I forgot to reduce the load,) I run a berger 210 vld match. But it took a little work. Congratz on your hand loads, I think your on the right track. For benchresting, remove the front slingswivel, it will throw a bullet when the recoil hits it. Again, great groups !

I shared your joy when you validated handloading with that first group.

Awesome video..just picked up a savage model 110 6.5 and a browning x-bolt hells canyon .300 win mag and I just learned alot about reloading and now I wanna get in to it and once again nice video..new sub here

Great video thank you very much for all the knowledge

I just plunked down some serious money on a custom 300 win mag for long range hunting and shooting. I am very thankful you produced this for public consumption. I'm also thankful that I went the custom route, since you have demonstrated in this video how to put lipstick on a pig (no offense but that TC chambering is pretty awful). Maybe look into replacing the bottom metal to accept an extended magazine? The groups were clearly better when closer to jam. With the state of the Union hanging, we are all being pushed (not so gently) into reloading, and I have saved this video for future reference. I'll just hope the components become more readily available soon. Great video, thanks.

I’ve never reloaded but been wanting to very nice video thanks👍🏻

I'll save you the trouble.... 70.0gr of IMR4350 in hornady brass with Fed 210 primers pushing a 175 SMK at 3130 out of a 26" barrel. Best I've found. Side note. From everything I have read and found the 300wm gets better accuracy without magnum primers

@michaelmuzzy8401

4 жыл бұрын

@rob roy thanks for the info,looking for a lighter load for white tail in ny. the 180 just destroys them,only shooting about 100 yrds.