It's a crawler boat! Lol

It turns sooo smooth!! Looks cool too!

Can't wait to see what it becomes... awesome Joe love when you turn something into normally would look 2s at to Can't take our eyes off!

That would be perfect for my parents pool.

@ExocagedRC

3 жыл бұрын

YEP!!

Was hoping to see the upgrades on this video. But can't wait to see what you do with it.

Thank you so much for your assessment of this boat 🙂 I'm looking for a pool boat for my grandson & that looks like it'll do the trick 👍

Enjoyed the review!

Great video you showed me exactly what I wanted to see the inside. Thank you !!

Put that castle 1/18 brushless motor on it

I have done some boating, if u remove the rudder motor, use the existing mount for steering servo, then u can screw it in the bracket, instead of glueing, more permanent👌🏼 and if u do the same with engine mount and esc/reaciver u can get all screwed in place, good luck and have a nice day :) Cheers from sweden

Shark motif Be carefull 😂😂

Man thank you for the video, and sharing.. This is perfect for my 5 year old to start... Great video. Thanks again.

I cant wait to see what you do with this

Ok so it's a pool boat for the kids!! Let's see what you do to this. 👊👊👍👍

Looks like a fun project. For the costs here, you can't go wrong.

The paint job is really nice

That's definitely a pool boat! Lol Can't wait to see your mods. Always enjoy your vids! Right On Brother.

@jdpasl

3 жыл бұрын

Vitavon parts baby!

@Smile-N-Bear

3 жыл бұрын

@@jdpasl 🤣😅🤣😅

Surface-piercing props aren’t cavitating, but rather they are entraining large air bubbles to prevent tiny air bubbles from forming from the pressure drop across the prop blade surface. The roostertail is just bonus. Whether one has to worry about cavitation at 1/10 scale is not so clear to me. But I love the surface piercing prop on my brushless Rio. P.S. Most boat ESCs are full throttle whenever under power, they just dump the extra power that’s not going to the motor, is my understanding.

Cant wait to see the build I want to make one to but I have not find one that I like to build

I can’t wait to see what your going to do with this.. i bet it’s gonna be wicked, knowing you 🤪⭐️

Sweeeet looking forward to this👍

It is a shark livery so you'll definitely make it a vicious killing machine maybe a Holms Hobbies crawl master 550 motor not to fast just a bit more than this bathtub minnow it's got potential, thank's for sharing Joe necessary mod's are what some of us love doing look forward to see your's 😎👍🚤🦈

Great unboxing and test run with one hand! 👏😊 I know that 👍

Cooler Typ , super Video ☝️👍🤝

You should put brushless in it just for fun. Maybe a mba micro? We actually use those Walmart boats for fishing we run our bate way out between trees and stuff that you can't cast to it's pretty fun. We even have one that we just have a line and hook on and actually hook fish and bring them in with the boat. I use those cheap 60 dollar Chinese dual motor 3s boats allot of fun. You should try it's fun trying to bring a fish to shore with a boat. 👍🤙✌️

"Speed Wobble!" 😂 Look forward to what you can do with it. Would definitely be useful in a swimming pool.

@tippedbacktj8492

3 жыл бұрын

CCxRC IS IN DA HOUSEEEE

@CCxRC

3 жыл бұрын

@@tippedbacktj8492 Yeah man! Joe is one cool dude.

Cant wait to see what ya are gonna do it for mods

You are the king of modifying lol

We have the 24 ft version and we got our daughter the 24 inch version haha. She loves it!

hey i just got this today and man it is so fun..just reference for future buyers don't use it in super strong rapids.

MORE POWER!!!!!!

It works,just needs some upgrades 👍🏻

THIS time Friday, joe opens with this boat doing 60mph! He opens it up, & we see only the hull is factory original. 😁

@mikeupton5406

3 жыл бұрын

brushless setup from one of the China 1/16th buggies ought to do it.....

@choke666

3 жыл бұрын

WITH VITAVON PARTS LOL!

lol, you had high high hopes for that.

@JoeOvercoat

3 жыл бұрын

bring in the wimmens & chillins peeps the shark is in the water!

@ExocagedRC

3 жыл бұрын

LOL yes I did!!

I hope you do a build video

Is there a part2 with upgrades maybe a lipo battery and or a brushless motor? Please share a link would love to see it!

8S BABY !! 😎👍

Does the charger light change from red to green or turn off when it’s fully charged?

I had set my hopes to high for the little guy

@ExocagedRC

3 жыл бұрын

me too, even on 2s it doesn't get on a plane, maybe 3s will do it.

@rc-daily

3 жыл бұрын

@@ExocagedRC time for a brushless 380 boat system!

I bought 3 of those (they were a slightly different style and color) from the Clearance aisle at Walmart for $19.99 each. Mine go at least twice as fast as that. I was impressed for what they are. Wish I could post a vid on my reply.

In its current state you couldn't get going fast enough to sink itself on a iceburg. Actually a iceburg might outrun it. With uprades definite fun factor.

I got one for $11 at Walmart on clearance. Definitely want to speed it up a bit

What did u do with the wake boreds

First time someone wants money to be a member see ya

Go fishing of that baby. Once its a bit quieter. Check out Rc athletes. He fishes using rc boats. . It's awesome

Make that thing go . And add a hydrofile . Front end . Make that puppy plane

I took mine in my River and right at this minute I am doing a 30 mph motor swap

You should make it hobby grade with different electrics and stuff

Oh ya, needs to be modified. Go for it! KEEP ON BASHING! OR FLOATING, LOL

Where is the bell for the next episode???? cant wait!

I've debating making a jet boat lol

Put a brushless set up in it!

Any way how long can run the boat

There down to $14.99 now. Now that's worth it.

Mate. I need to see this thing on a Lipo and brushless

given any boat you get from walmart is geared toward kids dont expect to do anything fancy out of the box. you can always swap out all its original electronics and possibly the motor too for some hobby grade. kinda interesting not alot of RC boat uses a gear reduction.

Least expensive episode feature? 😃😊

Make a video upgrading it like put a hell of good system in it but first put like a Chinese cheap system and then put like a really good system

It is no wonder kids are not getting into radio control as much as the industry needs to sustain themselves, if I got that I would not go for anything RC, I started with clockwork then remote also a Tamiya or two but were to fragile for my clumsy lack of driving skills and did not bother until I saw a TRAXXAS T-MAX and E-Max but broke them every time I used them probably because I put the most power I could find the T-Max got a huge nitro heli motor the E-Max got a couple of brushed 720 motors. So nothing until I happened upon a 5th scale off-road meeting in Germany, I blagged some cash off my father and what I had in my post office account and bought a FG Marder 23cc gas buggy, but then had to wait another couple of months to get a stick transmitter and receiver and a receiver battery, then syphoned the 2 stroke lawnmower of it's petrol oil mix and annoyed every neighbour in a mile radius of home as there was a big woods not far from home. Eventually my parents used to take me to tracks and leave me there all day, the rest is history, but the cheap toy grade nearly put me off for good. Even when first I tried to race rarely got passed practice or qualifying due to breakages or and bad driving but thanks to all there I got loads of help and hand down parts and then I raced, I have found the 5th scale guys not so serious as other smaller scales were and it is still like that practice qualify barbeque beer sleep out of the tent and repeat they did not take themselves seriously but once on the track different people and that was my kind of racing.

Looking forward to Mods, everytime I try something like this I loss interest & still spend a fortune!

thats actually a real brand of boat

Sub i really want to see this upgrade, nice video

I had one of those and I sank it bc I upgraded it it did a nose dive then broke and sank

Props CAN cavitate under a boat.....that’s what all the old RC boats had........which is why surface piecing prop systems are the rage for the last 25+ years😎 $30 more you can have a real proboat jet boat. We have a fleet for racing in the swimming pool......it’s a real toy boat.

Speed wobble 😂😂 i have one very similar and have modified it. Much more fun with power

Walmart boat, Ebay boat, Amazon boat, for $30 it's got to be good.

If it was me i would not lose my time try to upgrade this thing

Put vitavon parts in it LOL.

@ExocagedRC

3 жыл бұрын

LOL I checked and he doesn't have anything

@jdpasl

3 жыл бұрын

@@ExocagedRC ask him to make parts. Hahahaha

Slow crawler day?😜

@ExocagedRC

3 жыл бұрын

I'm going to make it faster I promise!!

Could make a cheap rescue boat for the real boats that break in the middle of a lake.

Bought this a week ago…The box that holds all the electronics got water inside. Now it don’t work. Waste of $30…I’m going to see what happens if it drys out.

@ExocagedRC

3 жыл бұрын

Bummer

I saw one today and it said wakeboat 2.0 and that it was faster

Great boat for kids I bought a hundred dollar one on Amazon and it broke in the first use.

Go direct drive! No reduction.

That thing would go better in the garbage bin! 🤣🤣

Please rebuild it to 4s lipo :))

@ExocagedRC

3 жыл бұрын

4s?? LOL I'm thinking 2s

@gregory9157

3 жыл бұрын

@@ExocagedRC with 4s it can possibly do a floating backflip 😂

Take it back get your Money !

@ExocagedRC

3 жыл бұрын

LOL too late

Upgrade

I can't believe PAVATI ( the maker of $500,000.00 WAKE BOATS) actually put their name on this P.O.S. !!!!!

Save it for the 4th of july, make a really big fuse and drive it out into the lake until it explodes.

Modify it!...woohoo...lol

Mod..IT

Spend another 30$ and get a pro boat sprint jet lol

Bro you sound like iron clad lol frfr

Wow lol

Why not make it over kill. 3 or 4s with a 1/10 motor. It would be hilarious.

@ExocagedRC

3 жыл бұрын

I've got it on 2s and it seems happy, haven't put it back in the water yet though

@JXZ2

3 жыл бұрын

@@ExocagedRC Awesome! Can't wait to see the results.

It’s not brushless

Cool looking boat. Even if you don't increase the speed much, it will be much nicer to use with proportional control. I bet it would be easy enough to bodge a bigger motor in, though. Maybe a 390 from someone like a wltoys...

@ValleyRC

2 жыл бұрын

NVM just saw the followup video 🤣🤣 Those little brushed motors just don't have much thermal headroom! I tend to go to brushless for stuff with motors this small to avoid the issue. A little 280/370 size brushless motor and esc are dirt cheap these days and they have way more performance AND much better thermal properties. Chances are you won't need the throttle EPA to be 100% either which will further help heat matters. It might sound a little elaborate but those little brushless motors are way tougher and better performing and you can always move it between projects.

Soup it up 6s power

it’s called v drive 😂

IT'S A WAKE SURF BOAT THEY DO NOT GET UP ON PLANE AS A NORMAL BOAT WOULD !!!

It hauls ass too!

Yep, very Walmart ish.

chapter than a real boat lmao

I am not use to see you advertise scrap like this

I aint buying that thing! My farts could crack that cheap plastic hull! 🤣

@ExocagedRC

3 жыл бұрын

LOL I believe you!!

Don’t buy rcs from Walmart

It’s a disposable piece of junk. Best use would be to pack it with fireworks, light the fuse, and send it on its way.

dude don't promote that toy grade garbage... The hobby has real rc boats..

my grandma is faster