This still the best explanation on KZread of how to use the NS-2. Anytime somebody asks me how to set theirs up, I just send them here.

Watched this video about 10 times because I always forget how to do this. Thanks for making it.

@bflo5210

4 жыл бұрын

Me too.... I run reverb and delay and a few other effects thru my effects loop on my 5150iii I wonder how this would affect those?🤔🤔🤔

@jordantyers119

4 жыл бұрын

B Floyd run your gate before your modulation effects (reverb,chorus,flanger,etc.)

@johnnyraybuck1671

3 жыл бұрын

Very helpful and straight forward.

@davidcarpenter9232

3 жыл бұрын

Yup

finnaly. someone that can explain the effects loop in simple terms . thank you

@SubuNomo

6 жыл бұрын

Johnny Dollar thank you for the kind words. Cheers from India

1) For those that don't know, Boss pedals are buffered so that there is no tone sucking, which is nice. 2) The main reason for the "loop" built into this pedal is that the input section of the pedal circuit senses the original input, then compares it to what is going out of the output jack on the pedal. The NS2 attenuates the noise accordingly. This helps avoid over attenuation (or tone sucking).

@larrytate1657

2 жыл бұрын

Thanks for the info. If one does want to check on the tone to be safe, is it simply a matter of clicking the pedal off or would it have to be completely unwired and removed from the loop to check for tonal changes?

@ShawnJonesHellion

Жыл бұрын

I found adjusting the 2 knobs correctly made my sound great without playing with more cords

Awesome video! Most people on YT aren't showing method/situation 2 of your video and I think that's very useful for amps with no fx loop.

Thank you my guy for doing every possible step and where you can plug it in I had questions you answered them through an observable experience. Ty

Thank you. I needed method 2 and went through 3 or 4 other videos before finding this. Much appreciated!

I have those same Planet Waves cables, bought about 14 years ago and never had an issue. Solid choice

Very good video. No more searching in Threads. You nailed it in one video. Thank you!

You’re one of the few guys on here who knows what they are doing. Subscribed.

Just got a tube amp and this is exactly the answer I was looking for!! Thanks!

This is THE best video on how to use this pedal effectively, you explained it so well, even I can understand how to use it. Thank You so much, now off to go get me a boss ns-2.

@SubuNomo

3 жыл бұрын

Thank you so much for the kind words David, and all the best. Do let me know if you need some follow up help.

This was great!!! Thanks for sharing my friend!!!

Thank You for a "Great" Video my friend. Your time and efforts are appreciated very much. I have a PRS Sonzera 50W Combo (which I love) but the "Hum" was a bit loud with 8 pedals (now 9 with the NS-2). The way you have it connected works great with your setup. It's my 1st Noise Suppressor so I wasn't quite sure of the correct way to do it. Thank You again...

@SubuNomo

6 жыл бұрын

Glad I could be of assistance :) Cheers from India!

I've been looking everywhere for this video. The most informative with the least BS

Great video Subu !

Great video! Thank you!

Great video and info, thanks!

Great content, great humor. Thanks!

Excellent explanation, thanks!

Thanks, a great video, sharp & clear. Will try the 3rd method 👍👍😁

Thank you. You covered this much better then other videos.

i think only you and one other person have uploaded a video showing the correct way to set up a noise gate pedal. bravo subu!

@SubuNomo

2 жыл бұрын

Thank you so much man. Always glad to share 🙂

🙏 thank you Sir ! Very helpful

Thanks for this helpful video!

Great video man, thanks a lot for this! Cheers!

Perfect explanation, and perfect Spanish pronuntiation!!. Dos perfects in one message ;) Thank you for the explanation, it is useful for a newbie in using noise reductors like me :) Greetings from Spain.

@SubuNomo

7 жыл бұрын

Carlos Esgueva thank you man. I am glad i could help you out!! :) hello from India.

Super helpful, thanks!

great video! well explained.

This video was a godsend mate Thanks 🙏

Really good Noise gate tutorial!

Thank you a lot dude,greatly explained

THANK YOU ! you helped me out big time.

Much help. Thanks bro 👍🏽

Thanks very much! Very nice video, helps me a lot.

Informative video - cheers

Great video - saved me buying two gates! That seems to be a good idea if your amp is feeding back noise in the preamp before the fx loop, but mine probably isn't gonna be doing that... fingers crossed....

Nice demonstration...!!

Basic and clean video.Thanks

Well explained, thanks 👍🏻

Great video, thanks!

Thanks for the valuable info to help a noisy amp appreciate it my friend

Thanks a lot :) Was thinking of getting a noise gate soon !

Great video ! Thanks

Veeeery well explanation! Thanks

Very good video thank you bro!!!

Very good! Thanks! Muito obrigado!

Great video!

The best explanation of this pedal. Tanks.

@SubuNomo

10 ай бұрын

Thank you so much :)

Thank you, very helpful

Thanks man. Finally someone.

Excellent video dude. Much more helpful than most. Have you made any videos on pedal board set up?

EXCELLENT VIDEO

Loved the Rob Chapman greetings

that was usefull for 100%. good video. thnx dude

@SubuNomo

7 жыл бұрын

+Lex Ftc always welcome and cheers from india :)

Awesome - thanks man

Thanks for making had pedal for about 20 years lost manual

This will come in handy as my amp has an effects loop. Thanks a lot.

Excellent explanation thank you Subu Nomo

@SubuNomo

7 жыл бұрын

Thank you :) cheers from india

@SubuNomo

7 жыл бұрын

+Kh2o you are welcome :)

I love you man ,,, great video ... I'm looking to do some quieting down on the amp & strat ,,, you know the deal ... you give me all three solid methods ,,, you got the best video on this ... thanks 👍👍👍👍. D

@SubuNomo

3 жыл бұрын

Thank you so much dude! :)

Thank you.

Thanks Subbed I love your answer about tone suckle

Thanks a lot, man! I love ya!

Excellent!!!!!

best video to learn about this

Good explanation, got a Subscribe

Thank you Subu. Nice tutorial. More tutorial videos...:D

zaebis', chetko! "spasibo" from Russua

This was very helpful. Thanks. Subbed.

@SubuNomo

7 жыл бұрын

+CoffeeDrinker71 thank you so much. Cheers from india and please dont hesitate to suggest video ideas or if there is something you need to learn. Maybe i can help :)

@CoffeeDrinker71

7 жыл бұрын

I just picked up a used NS-2 on eBay based on this. I'm anxious to try it out! :)

@SubuNomo

7 жыл бұрын

+CoffeeDrinker71 so glad i could be of assistance :) cheers from india

Great and useful video. Your presentation was clear and to the point. Wish you the best of luck on your youtube channel. From an indian brother from the south :)

@SubuNomo

7 жыл бұрын

Thank you man. Wish you the same.... Indian brother from Arunachal here :)

Dude thank you!!

Thank goodness someone has correctly demonstrated/described situation two at 1:50 👍. Just looked at the Boss Manual which to be fair does show this type of situation, but it depicts a Tuner and Compressor in the loop. The manual should show an OD/DIST pedal in the loop; as far as I know, tuners are not known for creating noise 🤔.

@SubuNomo

3 жыл бұрын

Thanks!! 🙂... Also, They really did demo it that way in the manual? Oh dear. 😬

Hey love ya man great video.

@SubuNomo

6 жыл бұрын

Thank you :)

This is really helpful for the newbie

Hah finally someone who uses it like this! Awesome video! Maybe you should mention that time based effects like loopers, as well as delays and reverbs have to be placed after the whole noise reduction thing (between the NS-2s output and the effects return/poweramp) to avoid cutting off your nice delay and reverb trails :-)

@SubuNomo

7 жыл бұрын

+Chris S. Yes that is a good suggestion.. my bad i didnt mention it and focused only on the amp and drive pedal noise. :) time based stuff after noise reduction.

@JulioJustiniano

6 жыл бұрын

But what if your noisy pedal IS a delay?

@TheSitambien

6 жыл бұрын

ill try this!

@TheSitambien

6 жыл бұрын

if its a delay, put the noise reduction after it. if the delay is the first of your modulation efects, you will be fine.

@NY-ln9qy

5 жыл бұрын

Nice.. how about if your amp doesn't have effect loop where do I place my delay, reverbs etc. thanks

Hello Subu Nomo, just got one of these very cheap on ebay (had no noise problem actually, but it was like 30€ shipping included). Thanks for teaching me how to use it! Greetings from germany

@SubuNomo

7 жыл бұрын

+The Defenestrator i am so glad i could be of help man. Also, Germany is awesome!

@carlosbell1132

7 жыл бұрын

Muhammad Haryandi tuner first, then into noise gate

@axxywaxxy9316

7 жыл бұрын

The Defenestrator the signal will still be undisturbed for exact tuning?

@carlosbell1132

7 жыл бұрын

Muhammad Haryandi Noise doesn't affect the Note you are playing in terms of tuning. Anyways if you place the tuner after the noisegate it might be annoying since the gate will cut your notes sustain and make it much more complicated to tune your guitar/bass.

Thank you so much!

Thank you Subu

@SubuNomo

6 жыл бұрын

:) Glad you like it.....

Bro good video. Noises suppressor will help whit a ground loop on my amp.

Hi. very good video. Many musicians use a TS800 to boost the distortion of our amp (in my case Metal) and that produces a lot of noise. Maybe you should add something like that, in my case I do something similar to the third example that you give, the only difference is that I connect the TS808 to the input of the NS2 and it works quite well. saludos desde Chile

Gladly hit subscribe after that Mike Tyson Joke. Thanks for the info and the laugh dude

@SubuNomo

6 жыл бұрын

thanks man. Glad to know you enjoyed the vid :)

muy bueno el video amigo chino

@SubuNomo

7 жыл бұрын

Thank you for the kind words. By the way, i am Indian :) greetings from India

Yes, I feel that a noise suppressor with an effects loop is a big deal. In addition battery is also vital in some cases. There are not many that have both features. The battery deal I love as it does not take up one of my power supplies. Good ob.

Great video! Well presented. Do you have one showing how to adjust the gate?

I have the same Maxxon was super noisey especially with my hot pickups but yeah man this shit saved my ass for live situations. THANK YOU@!

@SubuNomo

7 жыл бұрын

+Doug Cleary i am glad i could help you out. Noise can get real annoying.

thanks for the video. in the end, if i have an Amp with effects loop, would you prefer to use it or use loop of the ns2 with the overdrive? which methode gives less noise? thanks

Thank you!!

Great video Subu. Could u make a demostration of the tone sucking you mentioned at the end of the video?

Thanks for the helpful vid. Im using two Suhr pedals (Shiba drive and Riot) so I will put them in Noise gate's loop. However I'm also using a drive directly from my Fender Hot Rod amp for more crunchy blues tones. Is there any hocus pocus to combine option 2 and 3?:)

Thank you!

Thanks Mr. Nomo! Great video and super advices!!!!!!!!!!!!!

@SubuNomo

7 жыл бұрын

+Antonio Quel thank you sir. Please let me know if you have any suggestions or want to know anything further. :)

he definitely knows how to set up that pedal. this is so helpful. Thanks a lot !!!AND recently I bought cheap noise gate which have two knobs ( output & sensitivity) and two jacks (input & output)here are the questions :1. where would you put the pedal ( my amp has FX loop)2. My MXR yjm308 booster is too noise when it engages(that's the reson I bought) should I put it after the 308?Thanks a ton Nomo. really appreciate it

For no fx loop + a distortion pedal, how is using the NS2's loop any different from putting the NS2 after the distortion? Is the noise reduction any different?

really thanks , i have a good day now

@SubuNomo

6 жыл бұрын

Welcome man. Glad to be of help.

Thanks!

AMAZING MAN !!! I just bought BOSS NS-2 with a COMPRESSOR and that was an information I was looking for ... does it work also with an acoustic guitar ? :)

@SubuNomo

6 жыл бұрын

Chris Ellys it definitely would!!

great video....how about a 4th scenario; what is the configuration when you have an Fx loop on your amp, and you are using the NS2 with a distortion pedal? thanks!

EVERYONE gets that last one wrong, well done

This is pure fucking gold. Thanks random human

Hey Subu good video. Many time's during practice I turn the volume up and I use a superbadass distortion and always get loud feedback. Can you or someone on this thread recommend a good noise gate pedal for that? Cheers