3 ways to reset TVs, Sharp TV fix review
Тәжірибелік нұсқаулар және стиль
3 ways to reset Sharp LCD TVs and enter SERVICE MENU, unplug tv hold buttons input and vol.- and while holding buttons plug in tv power till tv boots up K popup should appear then press together ch- and vol- to enter service menu, or also try press menu 9,9,9,2,2,2.
Пікірлер: 606
I kept trying like 10 times and screen would come on for a second or 2 but never a K on screen . I then disconnected the hdmi cable so nothing was connected. Then I got the K on second try. Re initialized and tv works again. thx
@TampaTec
7 жыл бұрын
zeus winston thanks for posting your experience, that should help others.
@longlive5558
7 жыл бұрын
Tampatec what do I due if my lg TV buttons won't work like I CAn turn on the TV that's it but I have. no remote and I just wanna get on the HDMI to play my ps4 and I saw your phone connected to your TV how do I connect my phone
@TairnKA
6 жыл бұрын
Well I did a Hard Reset, Nope. Then a Menu Reset (got 8 "OPC: leaves), No "SHARP" or "K" button, just snow and some hard to see snow where the grey patch is. :-( I'd try the third method but I don't have the arms for it. ;-) A note just flashed in the lower left corner (to fast to read) and the TV turned off, I'll wait a few minutes to see if it automatically turns back on or I'll turn it on? I tried the "Input" trick and now have a blank, black (no snow) screen and no hdmi channels? Well, audio is working, still black screen. Embarrassing, I forgot the HDMI cable, still have grey.
@phishback
5 жыл бұрын
@@TampaTec My Sharp Aquous LC-40D68UT is doing the same thing as Zeus', but my screen won't stay on...no K...any ideas?
@HueyFreeman14
4 жыл бұрын
Tampatec what happens when the k is on your screen?
OMG, somebody who gets right to the point without a lot of blah, blah, blah. Thank you so much! You got my thumbs up!
@wilvanzyl
Жыл бұрын
So true
Hi mate! You were amazing. Thanks for getting straight to the point. You have resurrected my tv that sat for over 2 years now. A local DIY dealer asked for $40 for the job I got done through your instruction in 3mn. Thanks a million !!!!
I couldn't quite figure it out for quite a few tries, but finally I got the K, entered the service menu, went through all 26 (in my case) pages twice, and turned the TV off. Turned it back on and it worked! Thank you so much!
Dear Tampatech, I am grateful to you for the first reset option, my menu is working now.
Many...many...thanks my friend! I thought I was either going crazy or my TV was on it's way to the junk pile. You saved the day! Keep up the good work!
Major props most impressive sir! My sound on my sharp just stopped working. Fallowed the reset per the menu, worked like a charm!
You literally saved our television. Thank you a thousand times over!
thank you so much, I can't even tell you how happy you've made me I've tried everything searching the internet for hours to no avail and your method of holding the input button as opposed to the channel down was the one thing that works I am literally at tears thank you thank you thank you so much.
Dude! So fast and cut-to-the-chase clear. Thank you!
THANK YOU! Worked on first try of disconnecting power cord for a minute. Appreciate how you are direct & get to the point. 👍👍
Volume down + input worked! I've had this "broken" TV for 3 years. Thank you so so much!!!!!!!! I am cheering so loud! a million thank yous!
You literally saved me a few hundred dollars yes. Thank you for this
Follow #3 advice and #3 worked for us! Sharp was no help what so ever. Thank you for your help!
Thanks a ton for posting this. My Aquos would not work with either of the remotes I use to operate it. Was starting to see what it would cost for a new remote sensor when I found your video. Unplugged it for a minute, turned it back on and all is good. Thanks again!
My sound wouldnt work so I put the TV in storage for a couple years because we didn't have a remote to get into the settings and reset it that way.. I held down the volume and input and it works again. You're the man.
You *literally* are the man, may god bless you and your family always 🙏
thanks brother, this question crossed my mind many times with my sharp tv, since I only get sharp tv's.
thank you so much! I was about to put my TV outside with a "FREE" sign on it when I ran across your video. Now it works!! You are awesome!
Wow this worked! Been trying for days to figure it out. Thanks for short and simple video. Also I had to make sure to manually turn TV off before unplugging so it didn't automatically come on when plugging back in. So happy to have my TV back.
@TampaTec
Жыл бұрын
Congrats fixing your TV 📺.
THANK YOU SO MUCH! My husband an I sat for 103734 hours trying to get sound and then we got sound but no picture! Lmao you saved the day 😁😂
Thank you this actually worked when nothing else did!
My TV was down for two months looking for qualify tech to solve (black screen a few seconds after switch on without sound) and back to life now with the "Volume down + input" Thanks a Millions !!!!!!!!!!!!!
i love this dude , hes directly to the point instead of bla bla bla nonsense bla bla awesome thanks for this
Thanks fer gitin our sharp fixed up man. After bout three attempts at goin thru tv situp the wife and me got ours a goin again. Granddaughter had pushed a bucha butons on remote and locked er up. We have Aquaos LC-70LE734U model, bout 5 yrs old. Thanks again tampatec fer the fix!
OMG...I'm so very glad I found this video. I was going out of my mind for an hour trying to unlock my Sharp Aquos tv's control panel buttons that I'd accidentally locked by pressing the wrong on-screen button! This video saved me$$$..thank you!
Many Thanks. The second reset instruction was A-Plus. Now working well. Thanks again.
Worked like a charm. Thank you a lot!!
Thanks for all the help with the Sharp TV's! I have a 90inch sharp aquos LED and I'm trying to connect it to my LG - XBOOM stereo. But I'm having a bit of trouble. Any advice or suggestions? I've been going through settings and have been trying to figure this out. Any help would be greatly appreciated. Thanks! Keep up the great content.
Excellent video with outstanding tips! I have a Sharp 37" Aquos that was dead for over six months, and I could not find any useful information anywhere online. Finally, as I was just about to drop $$$ on some replacement modules or possibly send the TV off to e-waste, I came across this video. I used your 3rd suggestion on how to reset the TV and PRESTO, back in business! Man, anybody in your neck of woods who needs in-person service is lucky to have you there. 1000x thanks from California!
How do I enter the menu screen to so I can scan the channels on regular antenna. Don't have remote or menu on my sharptv
Thank you your advice fixed my tv issue!
Nice vid mate. I have an older model Sharp TV and was thinking about getting into the service menu so I can do a grayscale calibration as these features aren't available via the picture menu as they are on current TV's that I've seen. Do you know if the service menu shows this and how you save and exit from the service menu if you use the 9,9,9,2,2,2 technique?
Hey, Im Erich from Temuco Chile, today I fix my tv set after 2 months, and a did it thanks to your video, thank you very much...👍🍻
awesome. it worked! I love my 65' thought it was done and was gonna have to spend bank to fix it. freaking tv cost bank lol.
Thank you so much for this video.
yo thanks for the tutorial. lots of help during this time, and stay safe
Hey man thanks for the informative video. I have a sharp aquos 26 which works sometimes and is mostly dead. At random times of the day the little blue boomerang light near the IR blinks inconsistently. It also does this as soon as i plug it in to the wall but totally refuses to respond in any other way. Be in the input vol down buttons the pull out and re enter power cable nothing works with it. Do you have any ideas..? Thanks for any time and advise in advance. Uk, London
I love you man :-)👍 second way worked with my 60" aquos
I have 55" sharp aquos led with a horizontal line in the middle for the first 30-45 min of play. After that is a beautiful picture. Thanks I tried the resetting several times to get the tv to this point. grandkid somehow damaged it. Does it have a bad capacitor?? thanks so much this video was a great help.
How would you deal with a failing light source on a Sharp TV, model LC-50LB261U?
Hey man I am having a problem with a Sharp 60in LED TV. I moved my TV from one location about 20 miles. Would you be able to give me some insight on the reason why my remote does not work.I have even went through the extent of ordering a $45 remote thinking it was the remote was bad and with the new remote it still does not work!
What if the tv doesn't have button of vol or input, just the power button?
I have a Westinghouse dwm32h1g1 thats showing upside down, any options for that to solve it?
Reset on remote worked beautifully. Thanks
Would this work on a sharp aquos lc-40le835u?
Hey man I need your help on my sharp 70inch tv cause it makes a shadow effected
I just seen your video.. I was told I need to reset my TV because my KZread does not work correctly I called AT&T and they said it was my Sharp TV... thank you for your time and making a video I want to try those methods that you did and hopefully one of them will work have a good day
Thanks I will try the Input and Vol- reset tonight. Trying to figure out why my TV randomly freezes and only way to get a picture back is to unplug it and Hard reset.
A few questions, If my TV is hardwired to the modem/router, do I still need to update using a USB? We don't have a physical remote and the app doesn't appear to have any functionality, even after setting up the port. We are having problems navigating the menus using the buttons on the TV. We lost the ability to select the options, the volume/channel buttons cycle multiple times in one touch. The volume stops working and it won't turn off unless we unplug it.
Great video, I just referred it to other youtubers seeking assistance with a flickering issue.
hey is there anyway to install a pop up blocker for the browser on the sharp smart tv's?
you save my day bro thanks!
YOUR THE MAN!!!! Glad i Subscribed. Have an old Sharp LC-19SB15J Your tip on pressing Input & Vol- then plugging it Finally turned it ON, get this I reset it needed but it won't turn on without doing your tip so it stays on i guess its working... But wasted hours on other internet tips pressing different combinations of Volume & Channel buttons, not 1 mentioned the Input button. Thank you so much & God Bless you! (David G. Yakima, Washington)
I just watched so many videos trying to get my picture back and nothing worked thank you so much!!!
Hey, I was wondering if you could help me. My Sharp Tv looks like a CRT display when it's on. I think the pixels themselves are messed up in some way, but I'm not sure. I'd appreciate any advice. Thank you in advance.
LoL you saved my tv!! You are my savior♥
Thank you!! Your video helped a lot
Worked just like you showed, thanks and thumbs up
Followed your instructions on the video. Everything worked up to the last instruction with the green screen. We pulled the plug for 30 seconds and plugged back in, however, only a black screen and a flashing boomerang appears. What should be the next step to get the picture to appear. Thanks.
What app are you using as a remote???
This worked for us! Thank you!
Thanks for posting such good info.
tampatec, 5o inch sharp/roku tv freezes then turns off. red led will be bright then dim then 1 flash every second until reboot then the same thing? any ideas?
bought a sharp tv with no remote and the retail icons and banner keep flashing up ,i dont have an "input " button on the side i have a source +menu button ,thanks
Had an aquos sitting in a corner for years then I watched this 👍🏾👍🏾
thanks a lot I fixed my t.v! I'm glad I didn't have to buy a new one.
@TampaTec
7 жыл бұрын
Emily Munoz congrats, best deal on a new TV is not buying one but fixing your broken TV. I fixed my TV 6 years ago still working.
@Peaceandlove13
7 жыл бұрын
Tampatec hi,my 55" sharp flat screen TV whole screen is a red n blue lines,iz dis worth fixing, wat do u think is d problem,plz reply
@mikenye9878
7 жыл бұрын
Tampatec can u help me
Best Tutorial, usefull, back on the couche .. tnx
Quick question will this fix the tv turning off on it's own every few hours ? Thanks for the video
Thanks!!! It was a big help!!!
Hi I'm having issues getting to my main smart central to download a app it only shows me favorites can u help me I have a sharp lcdtv Gj221-u model
i have a 50 lb371u flatscreen. when receiving input from my HDMI the power light is flashing with a red doulbe type pulse sequence. I was informed it should be solid white light. Can you tell me what is wrong
Hey man How re you . I have problem with muito Sharp aquos lc 55 4k It s turn on but nothing happen or show. I couldnt acess service menu. Could you help ?
have a sharp 55in but it wont reset. the sharp loco just keeps flashing on and off
Dont know if you have a solution...but I have a sharp lc37db5u, 05' model I think, and the hdmi port is being weird. It displays my Amazon fire tv. My ps4 won't display at all and my snes classic only has video, no sound. However before I got fire tv the snes classic worked fine. Any correlation between the two or has something else just randomly gone wrong?
I can't get to the service menu using the Vol - Input key method. I'm trying to fix an intermittent power cycling problem by doing a hard reset. Firmware is up to date. Any suggestions would be greatly appreciated...
Hola thank you for the video what my problem is I can't get KZread anymore on my Sharp tv can you tell me how to get it back working thank you.
waz up! do you know whats the problem on my sharp aqous led tv that reboot when I tried playing video through usb? LC-32LE155m is the model. it reads video file but when choosing the video to play, it reboot itself. appreciate men.. thanks
Sharpe lc-46x20e, i think i needed a new logic board because i had no HDMI input, buti thought i would try the reset (hold volume- and input then power up) now i have nothing, it will not turn on any ideas
Is using the service menu even more of a reset than the factory reset built into the menu? I have the LC-55P6050U and just after 2 years the audio suddenly went out on the speakers. The headphone jack works, picture, inputs, apps all work But without sound on any of them through the built in speakers only the headphone jack. Would this also be the main logic board?
If i do the reset will it still go into service mode if its a bad led? The problem is itll power up like normal show the sharp display then goes black and the bottom power light has a steady blink . Sharp 80"650u
Thank you man I did the reset vol¥ hold input then plug it in again and click the tv shined up aw man thx so much saved me some cold hard cash😁😁😁👍💪💪💪
hai I'm trying to get on my Playstation but when I go to the HDMI 2 it gives out only sound and the screen is pitch black but if I go to AV it gives me everything but soud plz help if you know how to fix
My Sharp 70 now looks like its bleeding from the top and bottom after simply picking it up from the center bottom and top. Absolutely no exterior damage.. Any idea's
Thankyou, i’ve learnt to reset it. My screen kept flashing red, green, blue, white i tried everything, until i reset it. Going good so far, i went as far as hitting my TV with a slipper, it worked for a bit.😂😂
LC-70LE750, Apps no longer work, would this fix the issue?
How do I get rid of "Free View from my sharp LC-32SH130K
I have a Sharp LC-52D85UN that won't power on. The power and OPC lights blink 2 times together and then the OPC light flashes 3 times. I pushed the volume up and channel down buttons while plugging in the power and the backlight came on, but I can't get the TV to display anything with the remote. I can power it off and on with the remote and the power button. If I hit the Menu button on either the screen seems to get a bit brighter and the reverse when pressed again. I tried the Input and Volume Down sequence to no avail. Any other ideas as to what could be wrong? It doesn't seem to be the power board, since the backlight came on. Any assistance would be greatly appreciated.
Thank you so much it worked...👍🏾
mil setecientas gracias tengo nueva tv me encantan tus videos me han ayudado mucho
I work at a TV rental store doing repairs and we get a lot of our sharps back with bad panels.problems such as dark spots and little bright white etchings.. i had them quit buying the aquas models.. being 60 and 70 inch tvs we were losing a lot of time and money..cool video
@TampaTec
8 жыл бұрын
good to know, thanks
Mine won’t come on. But when I put the volume down and input it flashed SHARP, then it went off again. It is a sharp aquos LC-60LE65OU
Working after first try resetting from the menu. I now have my port back... awesome
I have this tv and for some reason every time you unplug the power from the wall socket you have hold the power button down before plugging it back in, otherwise you get a blinking light. Only happens after unplugging the power from the outlet, otherwise it works fine after doing the power button hold procedure and it must be done everytime the tv gets unplugged.
Thank you , worked like a charm
hey can u help with launcher has stopped error on smart tv, was watching popcorn time when that pop up and it wont move pass that, is there a way to hard reset the set, its a Blackpoint smart tv, have tried this method with no luck
MY SHARP MODEL LC32LE240M no power how to fix it?
I have a Vizio tv n I can't get my power or volume button on either the tv remote or cable to work
My tv power light is red when off then I hit the power button on the remote and it turns blue but no picture or sound happens , what could be the problem . The tv is a sharp LC-50lb261u
Hi, I have the SHARP AQUOS LC-70LE640U, I need to know if this TV has mirroring capabilities of its own? Without using the Chromcast? Even using the Chromcast Ultra I still can't mirror my phone with the TV. It will make the initial connection and the little gray bar shows the initial page and says " connecting " and it doesn't go away. I try to move away from that page but the TV stays frozen with the screen showing the connection. I can connect with the Chromcast to KZread but that's all. I'd appreciate any help...