3 Ways To JUMP Start And WAKE A DEAD Lithium LiFePO4 Battery FAST!

The Professor shows you 3 quick ways how to recover a totally dead lithium LiFePO4 / LFP battery in seconds with basic tools.
30 Ohm Resistor: amzn.to/3Fpy3fN
Continuity Testing Light: amzn.to/41SppzW
Cigarette Lighter Plug: hobotech.tv/amazon/#Solar-Ada...
Jackery 12v Jumper Cable: gohobo.io/jackcable or gohobo.io/jzon
AmpereTime (LiTime) Battery: gohobo.io/ampere use code HOBO3 or HOBOTECH
DISCOUNT CODES on SOLAR PANELS - GENERATORS - BATTERIES - REFRIGERATORS
gohobo.io/store
SUBSCRIBE To BLOG (e-mail notifications)
hobotech.tv/subscribe/
FACEBOOK GROUP (discussion group)
gohobo.io/facebook
SNEAK PEEK of UPCOMING products
/ hobotech
HAS THIS HELPED YOU?
Buy me a coffee and be auto subscribed to e-mail notifications!
www.buymeacoffee.com/HOBOTECH
// - BEST SOLAR GENERATORS - //
ECOFLOW DELTA PRO 3600w Modular UPS LFP Battery Generator RECOMMENDED
gohobo.io/CkOL use code EFHOBOTECH50
Amazon: gohobo.io/dpamazon
ECOFLOW DELTA 2 MAX 2400w Modular UPS LFP Battery Generator RECOMMENDED
gohobo.io/d2max use code EFHOBOTECH50
Amazon: gohobo.io/amzd2max
ECOFLOW DELTA II 1800w LFP Generator
gohobo.io/delta2 use code EFHOBOTECH50
Amazon: gohobo.io/delta2amz
BLUETTI AC500 5000w Modular UPS LFP Generator RECOMMENDED
gohobo.io/ac500 use code HOBOAC500
BLUETTI AC300 3000w Modular UPS LFP Battery Generator RECOMMENDED
gohobo.io/nYHw use code HOBOAC3001B
CANADA? shrsl.com/3hl1v
Amazon +tax amzn.to/3MuBYZt
BLUETTI EP500 PRO 5100wh UPS LFP Battery Generator
gohobo.io/ZvQy use code HOBOEP500
CANADA? shrsl.com/3hl1v
BLUETTI AC200MAX 2048 Modular Battery Generator RECOMMENDED
gohobo.io/goXO use code HOBO200MAX
CANADA? shrsl.com/3hl1v
Amazon +tax amzn.to/3rPywky
BLUETTI AC200P 2000wh LiFePO4 Battery Generator
gohobo.io/X6ys use code HOBO200P
CANADA? shrsl.com/3hl1v
Amazon +tax amzn.to/3xBp6u4
JACKERY EXPLORER 3000 PRO RECOMMENDED
gohobo.io/jackery use code HOBOTECH
JACKERY EXPLORER 2000 PLUS RECOMMENDED
gohobo.io/jackery use code HOBOTECH
JACKERY Explorer 2000 Pro
gohobo.io/jackpro use code HOBOTECH
JACKERY Explorer 1000 Pro
gohobo.io/j1000p use code HOBOTECH
JACKERY Explorer 1500
gohobo.io/CweA use code HOBOTECH
JACKERY Explorer 1000
gohobo.io/vqkr use code HOBOTECH
//-- BEST SOLAR PANELS --//
BOUGERV YUMA CIGS "INDESTRUCTABLE" 200w Solar Panel RECOMMENDED
gohobo.io/yuma code HOBOTECH28 or HOBOTECH
BOUGERV 180w & 200w Solar Panels RECOMMENDED
gohobo.io/brvrigid use code HOBOTECH
Amazon +tax: amzn.to/370r0px
BLUETTI 350w Solar Panel RECOMMENDED
gohobo.io/ayja use code HOB350 for best price
CANADA? shrsl.com/3hl1v
BLUETTI 200w Solar Panel
gohobo.io/f4UB use code HOBO200
CANADA? shrsl.com/3hl1v
On Amazon + tax amzn.to/30AXTs9
RENOGY SOLAR PANELS
gohobo.io/8tvB use code RENOGYSOLAR10
---
HOBOTECH is viewer supported. When you buy through these links we may earn an affiliate commission. As an Amazon Associate I earn from qualifying purchases.
---
SUPPORT THE CHANNEL
To shop directly on Amazon use this link: amzn.to/2utihvF
HOBO STICKERS, T-SHIRTS, MUGS, BEANIES, ODIN MERCH
hobotech.tv/shop/
DONATIONS
hobotech.tv/support/
GET SOCIAL
Facebook Group: / hobotechcrew
Instagram: / hobotechtom
Hobo HQ: www.hobotech.tv
BUSINESS INQUIRIES / E-MAIL
hobotech.tv/contact-us/
NOT a free help line! Business only!
============================
#howto #battery #DIY #offgrid #DIYsolar #boondocking #rvlife #rvliving #vanlife
============================
LIKE COMMENT SUBSCRIBE!
(c)2024 hobotech.tv
00:00 Introduction
01:20 The Charging Problem
04:15 The First Method
07:05 The Second Method
08:18 Killing The Battery
08:47 Making Sparks
09:11 How To Avoid Sparks
10:56 The Final Method
13:30 Summary

Пікірлер: 356

  • @HOBOTECH
    @HOBOTECH Жыл бұрын

    30 Ohm Resistor: amzn.to/3Fpy3fN Continuity Testing Light: amzn.to/41SppzW Cigarette Lighter Plug: hobotech.tv/amazon/#Solar-Adapters Jackery 12v Jumper Cable: gohobo.io/jackcable or gohobo.io/jzon AmpereTime (LiTime) Battery: gohobo.io/ampere use code HOBO3 or HOBOTECH --- DISCOUNT CODES on SOLAR PANELS - GENERATORS - REFRIGERATORS : hobotech.tv/amazon

  • @mannyfragoza9652

    @mannyfragoza9652

    Жыл бұрын

    grate experiment that works. Hobotech can you imagine how many people threw their batteries thinking it was completely dead.

  • @peacepoet1947

    @peacepoet1947

    Жыл бұрын

    There didn't seem to have any protection circuit on the Jackery explorer I purchased from Harbor Freight. It started smoking when I hooked the Jackery to put some extra juice in the vehicle battery when the alternator failed and the engine needed to do some traveling to get to the next AutoZone store. The battery in my 94 GMC C3500 was down to 11.4 volts when I used a Harbor Freight battery clamps from one of the solar panels with the connection for a battery directly from the small solar panel. I had another connection that went to the 12 volt outlet. I put the ground on the negative side of the battery and when I connected the positive connection to the battery is when the Jackery started smoking and the 12 volt outlet died. I had the Jackery a short time and Harbor Freight replaced the unit. Didn't have any problems with the return. I also let Jackery know what happened. They were also very nice and timely in giving me support. I wish Jackery could have a hard wire option on the solar generators like the AC200 and the air plane 12 volt connection. I use that one for the 12 volt refrigerator/freezer.

  • @waltermapfumo5728

    @waltermapfumo5728

    2 ай бұрын

    Hi, how do I jump start a 48v lithium battery

  • @jstar1000
    @jstar1000Ай бұрын

    My son just got back from a 2 day river trip and killed his lifepo4 battery after two days of using a trolling motor. I put it on the charger and nothing. I watched this video and then connected a 12v jump pack for a few seconds then connected the charger back up and BAM! Up and charging like a Boss. Thanks brother.

  • @buckfutz79
    @buckfutz79 Жыл бұрын

    I NEVER comment on KZread videos, but I just wanted to send a giant THANK YOU for all that you do! I've learned so much over the years (and helped reduce my bank account balance) and it is absolutely appreciated. Keep up the fantastic work!! 😀

  • @kriseilers4274
    @kriseilers427411 ай бұрын

    Thanks for making my day! I know I can always count on you to help with stuff like this!

  • @TheEscapeShroomPerspective
    @TheEscapeShroomPerspective Жыл бұрын

    Great video! Not only did you give a lot of options to bring the battery back, but you also showed how to do each one!

  • @one007guy
    @one007guy2 ай бұрын

    I left my disconnect on in the RV and both my lithium’s died. I hooked up the generator and thought they were charging. Batteries only lasted for 2minutes. The dealership had a great tech that said they needed to be hump started. Thanks for confirming! I’m back online ;)

  • @BSerrell4
    @BSerrell4 Жыл бұрын

    Thanks for showing all these options. I was away from home and had to scrounge a way to do this to my ‘house’ battery in our van camper, using items scrounged from my son in law’s garage. He had one of those ‘dumb’ circuit testers with the light and alligator clip, and I had a separate small 12v 5aH battery. Made it work by tickling a wired-on 12v outlet while the solar panels were hooked up and ready to charge via a different connection. Bravo! Saved my bacon.

  • @77quagmire
    @77quagmire Жыл бұрын

    Thanks man! Literaly just used jumper cables off my vehicle starter battery and it worked! You're a life saver!

  • @jodienickypops
    @jodienickypops9 ай бұрын

    Thank you so much, you gave me the confidence to jump start my van’s lithium battery and helped me restore my power! 👍🏼

  • @ryan3786
    @ryan37862 ай бұрын

    You absolute legend! I thought I was up for a new battery after dusting off 3x life po4 batteries, which had spent 4 years doing sweet fa. 2/3 came to life charging but the last was spitting an error on the battery charger. Used the jump trick here... 3/3 straight back to life and charging up. Much appreciated good sir.

  • @mikemcguire5859
    @mikemcguire5859 Жыл бұрын

    Professor, welcome back from your desert vacation, enjoyed those videos. Thanks for the restart with a test light. Had not thought of that technique.

  • @FarrellMcGovern
    @FarrellMcGovern Жыл бұрын

    That was an amazing important video! I have not seen that covered anywhere else! But I bet it will be soon! Thanx!

  • @newtuber4freedom43
    @newtuber4freedom43 Жыл бұрын

    Very valuable info - thank you for sharing!!

  • @gregsmith1116
    @gregsmith1116 Жыл бұрын

    Thank you HT! You rock. I learned something today! Thanks again!

  • @loucinci3922
    @loucinci3922 Жыл бұрын

    Excellent pro tips. Very useful. Thanks for sharing

  • @todd.parker
    @todd.parker Жыл бұрын

    Super useful video, I'm sure this will save a lot of headaches for people

  • @Silodrome
    @Silodrome5 ай бұрын

    Just tried this with a dead lithium motorcycle battery and it worked! Thanks, you're a lifesaver. I used the stripped ends of a 12v wifi power cable I no longer needed!

  • @TimChang
    @TimChang Жыл бұрын

    Wow. This trick really work, it help me to fix my studio flash light's battery. Thanks!!

  • @lotharhb
    @lotharhb Жыл бұрын

    First time viewer here. Great info and very well explained, but that outro had me in stiches and earned you a sub! looking forward to more great content.

  • @saal202
    @saal202Ай бұрын

    Thank you Professor once again for another great tip, it worked for me with no problems

  • @jasonbroom7147
    @jasonbroom7147 Жыл бұрын

    Excellent video, as usual. It's worth pointing out that the battery voltage never was zero. The cells inside, usually in a 4S configuration, were simply down to whatever voltage (often 2.5v each) that the BMS is configured to shut off at. The battery cells were at 10v but the BMS turns everything off to avoid discharging the cells too low, which will damage them. All it takes is a small amount of forced current to bring the voltage above that threshold, waking up the BMS and enabling the charging mosfets to feed current into the cells. I learned this lesson with a portable power station that "died"...2 mins plugged into the automotive accessory charger in my car woke up the BMS and charged the cells enough that the AC wall charger could do its thing.

  • @marcfruchtman9473

    @marcfruchtman9473

    Жыл бұрын

    Ah... so the BMS disconnects it. Thanks for the extra info. And thanks for the video HT!

  • @drewgsands

    @drewgsands

    9 ай бұрын

    Hi, I have a 48 Volt 10 AMP battery that will charge for around 5 minutes then when I use the electric bike it will die very very quickly within 15 seconds how do I revive that battery. It does have a built in headlight and that's the only way that I can think of to discharge it. Or should I get another 48 Volt good battery and just go positive to positive negative to negative any help would be appreciated thank you Andrew

  • @cadefoster9279
    @cadefoster9279 Жыл бұрын

    Very useful tutorial! Great idea for a video

  • @rudirednose1903
    @rudirednose19037 ай бұрын

    Hi Prof Hobo, thanks for your input, great video - well appreciated 👍 Through all the videos and information on internet, we get a lot of education 😉. Cheers

  • @everaldopeixoto7634
    @everaldopeixoto7634 Жыл бұрын

    Welcome back, Professor!

  • @chipmeister111
    @chipmeister1115 ай бұрын

    For anyone with a 24V system... I connected (2) 12V AGM batteries in series to jump MY 24V system that was showing me 2.5V. Ran jumper cables with one positive clamped onto a resistor as shown in the video. No sparks and it took about 20 seconds for the inverter/charger to light up and begin charging. Thank you for this video, it was s great help.

  • @user-hd8ej8yx9p

    @user-hd8ej8yx9p

    26 күн бұрын

    thanks man, unfortunately don't have any other batteries available, will buy the Victron charger

  • @winstonsmiths2449
    @winstonsmiths2449 Жыл бұрын

    I have a cheapo 60v 5a charger that I use to jump my LiFePO batteries when needed. I use wall power but have also used my EcoFlow River Pro to power the charger. Most chargers need the source of input voltage to be ~5v about that of the deleted battery. I needed the 60v charger to get my LiFePO going. Works like a charm. I also make multitude of connectors for many scenarios. M4 connector to Anderson PP (APP), APP to cigarette lighter, etc. I use my chargers with ring connectors and M4 connectors to charge through my DIY solar generator setup using its solar input connection.

  • @rmcnasty7319
    @rmcnasty7319 Жыл бұрын

    Hello Professor Good video. Thank you for the tip.

  • @indycharlie
    @indycharlie Жыл бұрын

    Great , easy to understand video .

  • @NguyenTroy
    @NguyenTroy10 ай бұрын

    Wow you just saved me couple of hundreds . Thank you.

  • @12345howarth
    @12345howarth Жыл бұрын

    Great video. Was thinking of getting a lifepo4 for my eb3a to up the capacity. Wasn’t aware of needing to jump start if it goes dead. Good to know so I’ll be prepared. Thx.

  • @glamperjan
    @glamperjan Жыл бұрын

    Great demo!

  • @nickpennekamp9553
    @nickpennekamp95536 ай бұрын

    100% helped! Thx a ton!

  • @noetabares727
    @noetabares7274 ай бұрын

    Thank you for the information😊

  • @user-ru5wr6ds8c
    @user-ru5wr6ds8c9 күн бұрын

    Thank you very much for this informative video, it really helped me with my dead Lithium-ion battery!

  • @RajunCajun1
    @RajunCajun17 ай бұрын

    Thank you very much! You have saved me money today! Thank you sir!

  • @christophelaverdure1351
    @christophelaverdure13514 ай бұрын

    Thanks for this video, I had a strong suspicion that my bluetti wasn't really dead dead but just needed a little jump start. Saved me a lot of money!

  • @Poppy_love59
    @Poppy_love59 Жыл бұрын

    Good to know, thanks professor!

  • @rodneyross5282
    @rodneyross5282 Жыл бұрын

    I was wondering where you have been. Great information video for sure. I see you brought out the infamous clamps again remembering the last time hehehe. Have a great week. God bless.

  • @YNPBORN
    @YNPBORN Жыл бұрын

    Great video Tom!

  • @WeekdayAngler
    @WeekdayAngler11 күн бұрын

    Awesome! This just saved me $200 on a fish finder battery. Hooked it up to my jump pack and afterwards it charged up again. Thanks! 🙏🏼

  • @westcoast01letsride
    @westcoast01letsride Жыл бұрын

    Dude, how cool are you .. thank you, great tutorial. Thanks again.

  • @tikoy1955
    @tikoy1955 Жыл бұрын

    Great informational video.

  • @josephlegong8023
    @josephlegong802311 ай бұрын

    You sir saved me. Thank you for this.

  • @lancebro121
    @lancebro121Ай бұрын

    Awesome dude I'll be using this I bet ! Earned a sub and I liked the simple explanations thank you

  • @chrisbeasley9538
    @chrisbeasley953819 күн бұрын

    😅Thanks for this, after I waded through all the other b.s. I finally found this fix which was simply and succinctly explained and of course worked within seconds I used a lead acid jumpstarter with no problem that I can see.

  • @Goody2shzToo
    @Goody2shzToo9 ай бұрын

    I have all of this stuff except for the Jackery. But since I didn't know about these, I used a 100-watt 18-19v solar panel and connected it directly to the LPO4 battery and it immediately took it over 10v even though it was cloudy day. But HAD I KNOWN I would've used the handy little jump starter. So much easier than moving the battery around. So thank you so much.

  • @leoliu8189
    @leoliu81892 ай бұрын

    It's works ! Thanks a lot!!!

  • @paullehr9236
    @paullehr9236 Жыл бұрын

    Yes, I learned something. Options. I like options. And I liked this video. Thanks.

  • @Gordonseries385
    @Gordonseries385 Жыл бұрын

    👍 Cool, a life saver. Thank you!

  • @tpaw6908
    @tpaw6908 Жыл бұрын

    Thanks Professor as a woman that loves tinkering you just saved me . I am trying to teach women basic if your in a situation what would you do. Some will be stranded . Others of like minded learning will love this. I've missed you sorry haven't been on much. Have to go over to computer to channel. But you a coffee. Have a great day. Thank you. Wish you were closer.

  • @jcschwarb
    @jcschwarb2 ай бұрын

    Thanks. Looks easy.

  • @budgiebee7530
    @budgiebee7530 Жыл бұрын

    excellent, Hobo!

  • @jonathonbahrychuk2486
    @jonathonbahrychuk24866 ай бұрын

    Thanks for posting this video! It was very useful!! Subscribing to you.

  • @shelley131
    @shelley131 Жыл бұрын

    Great video, thank you.

  • @saturninomahusay5561
    @saturninomahusay5561 Жыл бұрын

    Thank You for the info...

  • @traviss589
    @traviss589 Жыл бұрын

    I was just thinking about you earlier today. It’s been a minute.

  • @roneysilveira2153
    @roneysilveira21534 ай бұрын

    Very good explanations tks

  • @1cosmocat
    @1cosmocat Жыл бұрын

    Thx. Very useful info.

  • @user-uf5si3fw4e
    @user-uf5si3fw4e2 ай бұрын

    Thanks for the info you have probably saved me $$$

  • @Christian_Harlow
    @Christian_Harlow Жыл бұрын

    Love your videos!

  • @Trevor7727
    @Trevor7727 Жыл бұрын

    in one case I had to break open the sealed case, disconnect the BMS and connect the battery charger directly to the battery bus bars. Once it reached 12V, I reconnected it all up again and the battery continued to charge to 14.4 V. I then re-sealed the case.

  • @gizmosaussieadventures147

    @gizmosaussieadventures147

    2 ай бұрын

    i might try this. as mine wont charge

  • @susanstrickland6774
    @susanstrickland6774 Жыл бұрын

    Great educational video. 🙂👍

  • @Nostrildomus
    @Nostrildomus Жыл бұрын

    Now I know what too do . Thanks Mon

  • @Jacko911
    @Jacko9116 ай бұрын

    I used the 2nd technique to jump my BMS. Big thanks, legend 🙏

  • @paigem
    @paigem4 ай бұрын

    This worked swimmingly lol thanks 👍

  • @jaystengel7511
    @jaystengel7511 Жыл бұрын

    Great vid!!!

  • @Chicago_Clout
    @Chicago_Clout26 күн бұрын

    Great video

  • @richcarter4113
    @richcarter4113 Жыл бұрын

    Thank you so much for this Vid. I was thinking that my camp battery was stuffed. And now its back to full health. Thank you Thank you Thank you :)

  • @wherami
    @wherami Жыл бұрын

    Excellent video

  • @teokastelan2930
    @teokastelan2930 Жыл бұрын

    Great video. Good to know !

  • @victorjavier4311
    @victorjavier4311Ай бұрын

    It worked for me. ,,I used the NOCO GENIUS10, 10A Smart Car Battery Charger, 6V and 12V Automotive Charger. Ty.

  • @solaronesw
    @solaronesw3 ай бұрын

    Thanks!

  • @oskosh50
    @oskosh50 Жыл бұрын

    Thanks, good to know !

  • @RacingBlind9
    @RacingBlind96 ай бұрын

    thank you so much. I didn't realize I could you a booster pack to wake it up! life saver

  • @coryanderson2371
    @coryanderson2371 Жыл бұрын

    I'm glad to see you're still there I killed a Jackie when the new ones and it's smoked and it'said it back to company haven't got it back yet Gosh me about 1500 but oh

  • @randgraham1
    @randgraham1 Жыл бұрын

    Thank you!

  • @jasonl3445
    @jasonl344510 ай бұрын

    Thanks! Your rock

  • @mr.goldenrod291
    @mr.goldenrod291 Жыл бұрын

    Victron battery chargers charge a dead LiFePo battery. Problem solved. Some battery chargers with a lithium setting only provide the LiFePo charge profile, and not the “jump start.” The BMS is a computer, and thus requires electricity.

  • @brushbum7508
    @brushbum7508 Жыл бұрын

    Thanks Tom ! TAKE CARE..

  • @jonkirkwood469
    @jonkirkwood469 Жыл бұрын

    Thanks, HT.

  • @stoutkm
    @stoutkm Жыл бұрын

    "Kick Start the Heart". Thanks for the video!

  • @retrozmachine1189
    @retrozmachine1189 Жыл бұрын

    There's a wide selection of solar chargers that will 'wake up' a lithium battery where the BMS has gone into low voltage protection. It's not something a lot of people consider when buying, but at the top shelf end of things Victron will do it and at the mid range tier Renogy branded chargers will if configured appropriately.

  • @rp9674
    @rp9674 Жыл бұрын

    I have a 12-volt lifepo4 I used in my Fiat 500e, super underpowered, car died on freeway after about a month. It's small enough and safe to carry around as a backup battery, that would allow me to get my keys out of the car and lock it & easily get me to a battery shop.

  • @whatmattersmost6725
    @whatmattersmost6725 Жыл бұрын

    To be 100% correct it's not the battery it's the BMS that cuts off the battery. The battery is just as it's lowest voltage/current per cell...

  • @jamespechie8436

    @jamespechie8436

    Жыл бұрын

    Yes , I wish he would correctly teach what is really going on in a lifepo4 BMS (battery Manage System) . The cells will be damaged if the voltage gets to below 10 or so volts in a 12 volt battery..The BMS shuts the battery off. So the batterie reads Zero… but in reality,, it is at its BMS protection shut off voltage. About 10 volts n a 12 volt system. You are actually Resetting the BMS circuit. Now you must charge the battery. If you discharge it below 10 volts. You have damage your battery.. Thous ,the reason for the BMS..to OPEN the battery circuit. You read 0 volts

  • @Goody2shzToo

    @Goody2shzToo

    9 ай бұрын

    Very good to know! But my question is...connected to a controller that's supposed to shut it down when the voltage gets to 10.7, why doesn't the controller shut it down first? Or do we even know whether it was the controller or the BMS that shut it down? All I know is the battery read less than 1 volt when tested with a multimeter. I've been scratching my head over why the controller didn't shut it down at 10.7v....

  • @intimatespearfisher

    @intimatespearfisher

    5 ай бұрын

    ​@@Goody2shzToothe controllers were designed before lithium came out?

  • @chrisbeasley9538

    @chrisbeasley9538

    19 күн бұрын

    ​@@Goody2shzToomy question as well

  • @RPMexicano
    @RPMexicano6 ай бұрын

    Thank you, I had 3 dead lipo4. Charger would not detect. Used a lead acid full battery and wualla! Charging. Thank you so much.

  • @kele1264
    @kele1264 Жыл бұрын

    Awesome video. I can just hear the head slaps from folks who threw away their very expensive batteries because they didn't know they could save them. 🤦‍♀ Doh! I didn't know. Now I do. Thank you very much!

  • @jimdaly5077
    @jimdaly5077 Жыл бұрын

    Thank you. 👍🐝🌞

  • @Tommyr
    @Tommyr Жыл бұрын

    Welcome back from Quartsite! Good to see you in a new video!

  • @junkerzn7312
    @junkerzn7312 Жыл бұрын

    The wall adapter method works great. It doesn't even have to be a battery charger or battery or whatever. Two clip leads and a little pokery-jiggery and you are done. Nearly all wall adapters for the misc devices you might have lying around the home are either 5VDC or 12VDC. And all such adapters are current limited (usually from between 300mA to 2A or so), short circuit protected, and typically 'hicup' on a short (retry every few seconds continuously). So just find an appropriate wall adapter lying around in the house, read the label to make sure the output voltage is reasonable, and you can connect it directly to the battery without any resistors or anything else to jump start it. If you happen to have a little 300mA current limited wall adapter, It is literally impossible to damage anything. (The voltage varies a bit on these wall adapters, so use a multi-meter to check that its reasonable even if the label says 12V. But hey if the battery is dead and below 10V, then any "12VDC" wall adapter will do the job).

  • @lukemann577
    @lukemann577 Жыл бұрын

    You are the man! I thought I messed up my brand new lithium, batteries, and charger for my golf cart. Just fix them in less than five minutes if they are run in series, just jump each individual battery off my charger instantly kick back on.

  • @flyrobin2544
    @flyrobin254411 ай бұрын

    I have been jump starting batteries like this for sometime. When I am out in the field and have a singular 18650 battery that dies I put the dead battery into a flashlight first followed by a good 18650 battery and turn on the flashlight a minute, it works every time. Of course I recommend having a flashlight that takes 2 18650 batteries they last a long time.

  • @gabihollywoodflorida9745
    @gabihollywoodflorida974511 ай бұрын

    Wtf !!!! I cannot believe it!!! Dead12 v lifepo battery that I use for fishing reels back to life !!! I used a Schumacher instant power jump starter. Remember to leave the charger together with the jump starter to work. Thank you !!!!!

  • @RamblinBobReviews
    @RamblinBobReviews Жыл бұрын

    P.S. We love you channel HOBOTECH !!!!! P.P.S. We bought many power stations because of your reviews :) THANK YOU AGAIN !!!!!

  • @cooflypower

    @cooflypower

    Жыл бұрын

    You jump starter old power station with new power station, haha

  • @jimdoozy

    @jimdoozy

    Жыл бұрын

    @@cooflypower Power stations are designed to power up when they have all of their power depleted. He jump started a battery's BMS with a power station, which then allowed it to be charged like a power station. If the power drops to zero there's no power to turn on the BMS so ithe battery can be charged.

  • @cooflypower

    @cooflypower

    Жыл бұрын

    @@jimdoozy Professional explanation.

  • @TreetopFlyer74

    @TreetopFlyer74

    6 ай бұрын

    Tried this on my Dakota lithium battery... It's reading 0.7 volts. Jumped it and it's still not charging. What gives?

  • @ben94cobra
    @ben94cobra4 ай бұрын

    Worked great for Braille Green Lite LiFePo4 battery showing ~3v. LFP chargers wouldn't wake it, but touching the terminals briefly with a lead acid traditional jump box woke it up. DMM jumped to 11v and battery proceeded to charge.

  • @ronmitchell8929
    @ronmitchell89297 ай бұрын

    Thank you very much it did the trick. I used jumper cables from the car, gave it about 30 seconds and hooked my new lithium charger back up and wallah! The charger said the battery was 11.5V and 24% so the BMS shut down early. Anyways I got it and if it rains for 6 days I'll make sure I supplenent charge it.

  • @DannyStanley-uz1et
    @DannyStanley-uz1etАй бұрын

    Hey, try cleaning the bottom of the board.Where the solar joints melt melt togethereally appreciate your video

  • @khaled7965
    @khaled796510 ай бұрын

    Many thanks for this helpful video.. i have braille g20 lithium ion battery 2 month old only, i left the car for 45days, trying to start it but the battery looks dead, checked it 0.16V, i have lithium jump starter, before i jump start it I contacted Braille technical services, they said "You will immediately kill a lithium battery if you jump start it from another battery", so I was very confused, i watched that video and i take the risk 🥲, the car is running now for 4 hours then switched off and on .. looks great, i really don't know if i damage it or not😂😢, but i think this professor he knows what he is doing ❤

  • @Luscious3174
    @Luscious3174Ай бұрын

    Thanks, now I've got that song stuck in my head 😎 Any tips on doing this with Ni-MH batteries - specifically dead AA rechargeables?? The charger that I normally use refuses to charge them. They sat depleted for a while.

  • @vs7438
    @vs7438 Жыл бұрын

    Genius!

  • @masonw6361
    @masonw63614 ай бұрын

    Thanks for this informative video! If I were using a 30V / 10A bench power supply to jump start my 15.2V/4480mAh LiPo battery. Is there a specific current setting that I should use? I've been told sending it 24V will jump it but not sure if a specific constant current is recommended