Great info! will have to try this.

@rcrchery

7 жыл бұрын

Thank you for watching!

Your video's are top notch. Although I am not a "target" shooter with a high end bow (I'm a hunter with a Diamond Infinite Edge), I have learned a lot about form, posture, back tension, etc. from your channel. Please keep them coming. I just shot my first "tournament" and took second place (missed out on first by 4 points) in an NFAA 900 round. I attribute my improvement to you and your channel.

@rcrchery

7 жыл бұрын

That's so awesome on your first tournament! Congratulations on the second place win!! I'm glad my videos have been helpful for you and thank you for letting me know.

Great tech tips, thanks bro!

@rcrchery

4 жыл бұрын

Thank you!

thanks mate....

I assumed that the loop height is determined by adjusting the center shot of the arrow and bow. Adjusting the limb bolts is something I need to try.

your videos are amazing. Thank you a lot. You can not actually imagine how much of a help you are!

@rcrchery

7 жыл бұрын

Thank you for telling me, I really like to know that I am helping others out!

Hi, great video! Can you please make a video about breathing techniques during the shot execution?

@rcrchery

6 жыл бұрын

I'll work on getting one out.

@TYB439

5 жыл бұрын

Still not out???@@rcrchery

Robert, thanks for the vids. I tried this test and I noticed an improvement. If I backed out the bottom limb 1/4 turn, how much would I raise the d loop by to achieve the same results. What would be a good starting place?

@rcrchery

7 жыл бұрын

You'll need to have the bubble levels like in the video to know for sure. You'll want to make the level on the arrow have the bubble in the middle and then set the bottom limb bolt back to flush and tie on a new d loop with the arrow level. That'll put it in the same position as it was with the limb bolt backed out.

Hi I shoot with two releases tru-ball HBC and Carter target 4, when I shoot with the HBC I can aim in the gold fine at 55 yards but with the Carter target 4 my aim likes to settle at the 8 ring 6 o'clock any advice thx

@rcrchery

7 жыл бұрын

It sounds like with a trigger you have some anticipation going on and you're freezing low trying to see the middle instead of trusting your shot and focusing on consistently aiming and floating around the center with the hinge. Personally I would stay with your hinge if you're having better results with it. If you're wanting to use the thumb button you'll need to work up close with it to start with. 2-3 yards away at first and then work your way back as you're able to calm the anxiety response. Here's an article I wrote with some drills for it: rcrchery.wordpress.com/2016/05/01/beating-target-panic-drills/

Great information. Cool hep-cat music. What could be better??

@rcrchery

7 жыл бұрын

Thanks! You never know about the music and how people will take to it, but I just try to go with something I like and fits.

check this out ,, mathews chill x 60lb, 29 in, knock is about one eight low ,,, doesn't look right " BUT , it shoots a perfect bullet hole ????? backed off the 1.5 turn on both limbs and we get the same results ??any ideas ,

@rcrchery

7 жыл бұрын

Might be a little bit of adjustment to the cams you could make. Mathews have zero nock travel engineered into them, versus a Hoyt with the nock coming up as it's drawn back. You may find that slowing the bottom cam will help it perform better with a nock level set up.

I run zero weight up front it’s all in the back has to be that way cause if I run any weight up front I can’t hold it up

Would love if you utilized a shotgun mic, or a lavalier mic clipped on your shirt to clean up the audio :)

@rcrchery

7 жыл бұрын

I'd love to be able to as well but my camera doesn't accept a mic. When I was first getting into this I had no idea about that feature so when I purchased the camera I overlooked it. It would make things a lot better for sure!

@dukelacrosse3185

7 жыл бұрын

rcrchery Stinks when you find out stuff like that later! You can use a lav with a 3.5mm plug to record on your smartphone, or something like a Tascam DR-05 or Zoom H1 and then marry the audio file with the video track before you cut it up in editing. A couple of extra steps but nothing too substantial aside from mating the two tracks. Take a look at it, I think it could really raise the production value with minimal expense. Thanks for the tips!

@rcrchery

7 жыл бұрын

Thank you for the ideas there to look into, I'll do that right now!!

@rcrchery

7 жыл бұрын

Thank you for the advice on specifics. I ordered a lav mic for my phone like you mentioned today. Pretty excited about it!

@dukelacrosse3185

7 жыл бұрын

rcrchery killer! Let me know if you need a hand with the editing and I'll help you figure it out.