Enjoying what you're watching? ❤️ You can now support Matt from just £1.99 per month here kzread.info/dron/WP6vjgBw1y15xHAyTDyUTw.htmljoin ✅ Kept up to date with the latest events ✅ Early access to New Videos ✅ Updates on projects being worked on in the background ✅ Special emotes for comments & live chats ❤️ For full details, click here kzread.info/dron/WP6vjgBw1y15xHAyTDyUTw.htmljoin

I'm a bit sceptical about the aluminium foil. You would have to connect it to the electrical ground to really do something or else it would just shift the frequency/radiation pattern from what I understand about RF

@RagTheNutsOff

3 жыл бұрын

Howdy Vincent, yes ideally they would need to be grounded. my point was it is unlikely to make any huge negative impacts only provide some positives for the ease/cost/weight side. Matt

@statesmanls1

3 жыл бұрын

100% works and helps if you are using 433 like ezuhf. I can also say 100% effective for improving GPS lock. One of my models I had the GPS mounted 15mm from the FC and GPS wouldn't look. I put copper tape between the GPS and flight controller (not grounded) and GPS lock was perfect from then on

@FunBitesTV

3 жыл бұрын

@@statesmanls1 Copy tape around the wires between gps and fc, or just like a copper shield inbetween? cheers

@borisdamole

2 жыл бұрын

Copper tape backplane will help a gps. Foil should be saved for hats

Great content! Enjoy the heck out of my (now 3rd) dart250. I had a double stupid maiden. I had everything just right and then went to go fly and right aileron was appearing left and vice-versa. Crashed in the corn field (mostly horizontally) dusted off went through all checks again, couldn't find anything wrong with the servo movements. Looked at the camera and I just didn't flip the horizontal image so I changed out the battery and went for it again , and 💥.... didn't SAVE IT !!! All I can say now is welder glue is certainly my friend. And save your camera settings!

I love the Cat 2 fpv camera by far the best one I own..

@dougmcpheters1546

3 жыл бұрын

What model do you have it in? I have one and undecided what to put it in. More than likely one of my quads.

Hi Matt. Hope you are well. Thanks for these great vids. I had a question.... i have a matek f405 wing board with only 2 esc pads. Im now using the board for a tri copter vtol and wanted to use a 3rd esc.... can i use multiple escs off each esc pad on the flight control board?

It looks like you mounted your FC witht he heatsink out in the air through the canopy? That seems like a pretty good mod to talk about, too.

You can put the motor leads through some copper braid. Punched of coax like RG213 , Ground one end of the coax , Eg , Fix the one end to the negative on the FC flight controller , It acts as sort of Faraday screen .... You can do the same with the other cables .

Instead of putting led at the back you can try to put vtx. I had similar setup at balance it without led.

Hey Matt good suggestions. What VTX and antenna are you using in the 250g and what propeller size. Thanks for the info.

@RagTheNutsOff

3 жыл бұрын

Howdy Ty, just seen your question. My bad. The power train is stock and I'm using the 2 blade 5050 propeller. This works really well. As for the CTX, defo not the Matek 1.2 module and I believe the antenna style is called VRX. I got them with some cheap VTX's I bought ages ago, but have never seen them for sale. Matt

Try some sticky backed aluminium foil tape instead of the foil Matt , available at car body repair supply shops or probably online too, around 2quid a roll 😉👍

Yeah my 1st thought as you opened the back lid was, that's going to explode the moment he plugs it in. Then I kept listening and after you mentioning wrapping parts up with insulation material, now would be more concerned about overheating components. ... hottest component on my list is my 800mw vtx.

@RagTheNutsOff

3 жыл бұрын

yea none of that lot gets warm, event he ESC as it's only pulling a few amps anyway. Matt

Hey Matt, re the GPS. Did you apply hot glue to the top of the GPS and attach it to the top of the fuse, or did you glue it to the floor? I'm trying to work out if hot glue will affect GPS reception if I apply glue to the GPS antenna, and attach it to the top......

@RagTheNutsOff

3 жыл бұрын

Hey Matt, actually I'm using a huge puck one now and it's just wedged in there and won't move. For the smaller one, I did use double sided tape, that worked well and was a bastard to get out. So probably a better idea than hot glue? Hope that helps Matt Oh and DO NOT glue to the metal top of the GPS if it has no cover! Glue from the underside so you don't wreck the GPS antenna. Matt

Hi Matt Have you worked out a safe landing voltage so esc and f/c will not shut down. You did 40 km. What was your landing voltage and flight time?

@RagTheNutsOff

3 жыл бұрын

Howdy David, the model had a tail wind to get to its destination, see the review I did of the Caddx ratel FPV camera has that has the 47.92Km flight in there and the summary screen too I think. Matt

Hi Mat great mods i ordered the 10 mil spacers you recommended but they did not have bolts to fit the dart? what did you use? thanks nobby

@MGL83

2 жыл бұрын

In case you still didn't solve it or someone else has same problem. The motor takes m2 bolts. I got a box of various size/length bolts from amazon (~10 or 15 euro) and the m2 fits fine. I had more trouble finding spacers, and in the end I 3d printed one from thingiverse.

All good in the hood buddy actually matt, Did almost virtually the same mod to my bixler2 matt hope that you are keeping well m8 peace out cj. Oh n have you used the foxere wildfire yet?

@RagTheNutsOff

3 жыл бұрын

howdy Christian, yea it works well. As for the Wildfire, yes! been working great. Sadly have issues with my goggles, so thats very annoying. No negatives to say about the WF though. Matt

@christiangustar2434

3 жыл бұрын

@@RagTheNutsOff you got dom-v3 haven't you?..sure I had seen sum in a previous video...actually thinking about it ???I have a brand new pair in my stock room of goodys !!!...was thinking about getting the dji digital with a analogue adapter was just offered some for £400 including pnp...couple of weeks old and transferred warranty so if I was to go ahead and get them would have the dom-v3 for sale if that's any help to you Matt I am sure that we could work something out?..Actually would be great if there was a swap meet like the yanks have?? Food for thought?..peace out cjthedj77.

Hi Matt, hoe exactly did you mount the motor with those standoffs? Long M2 bolt from the motor mount thought the standoffs into the base of the motor? Or do you have screws from both sides into the standoffs? On the motor side the bell seems to be in the way for that. Thanks a lot.

@avsaase

3 жыл бұрын

@@RagTheNutsOff How are you getting the bolts in from the motor side? The bell is much larger than the 12x12 mm mounting holes.

@TheDroneNerd

2 жыл бұрын

@@RagTheNutsOff can you answer this question. I am having the same issue.

@RagTheNutsOff

2 жыл бұрын

@@TheDroneNerd the bolts come all the way through from the motor mount to the motor

how on earth did you manage to wire a TBS Crossfire Micro V2 in this config???!!!! please make a video on that alone!

hi Matt which version of the Cadex starlight was it the one with the filter

@RagTheNutsOff

3 жыл бұрын

Howdy Phil, the Caddx Ratel Starlight. I've not used the one with the filter. And there are two sizes, apparently the same sensor in both Phil, Matt

With all done, how many grams will your Dart come in at?

How are you mounting the motor to the standoffs? Are you using long bolts to go all they way through to the motor?

@RagTheNutsOff

3 жыл бұрын

Howdy Will, 4 bolts in from the motor side and 4 bolts in from the mount side, thats all. To get at the motor mount, its just 2 bolts on the underside of the model. Hope that helps Will, Matt

@brubakerjm

3 жыл бұрын

@@RagTheNutsOff How are you getting the bolts into the standoffs from the motor side? The motor bell is wider than the mouting holes which blocks even getting bolts in there, let alone a driver. Super interested in doing this mod as I wish mine were a little quieter. Thanks, Matt!

@OzFPVflyer

3 жыл бұрын

@@brubakerjm Hmmm and still no answer from Matt, such a simple question yet no reply.

@brubakerjm

3 жыл бұрын

@@OzFPVflyer I ended up printing one of these (in PETG, not resin): www.thingiverse.com/thing:4586350

How does this plane cope with wind? Mostly gusts or wind rising up hills or mountains?

@RagTheNutsOff

3 жыл бұрын

Hey Sam, pretty well. You need to watch the max cruise throttle in iNav for really strong winds as it will have issues with a 40mph headwind and trying to climb at the same time. Matt

@sams9716

3 жыл бұрын

@@RagTheNutsOff Thanks for the info Matt. I might look into one or get my Ranger 1600 going.

I just got a mention about the foil happy dayz

When you said 100 I was like, cool, 60mph but then you said 109 'miles' per hour, wow, I didnt know that this was capable of that. Was that on 2s or more? Also, with the tin foil wrapped electronics for rf shielding, if you could somehow solder them all to a common ground via some small wire, then it should be a lot more effective

@pnaty97

3 жыл бұрын

Aryan Gangurde that’s on the Mini Drak, probably on 4s 👍

@RagTheNutsOff

3 жыл бұрын

Yes thats right, the Mini Drak. As for a common ground, absolutely! Matt

What is the video tx you have installed in video?

@RagTheNutsOff

3 жыл бұрын

Hey Bill, definitely not the Matek 1.3GHz module 😁

@sparkey044

3 жыл бұрын

RagTheNutsOff Not a good choice?

Behold! RTNO T-Shirt on the way! 'Bout time 🥳🎆👕 "10 Aug 04:00 The campaign has ended and your order is now being printed!"

after the mods - still below 250g?

@RagTheNutsOff

3 жыл бұрын

Hey Tom, 196g before batteries and these mods. The foil would have added say 2g, the mounts a few more. Not much, but things will add up. Matt

@ragthenutsoff I've been using this RF shield tape for a while on long range wings and I absolutely love it. It's a form of acetate tape as well so it's light, strong, easy to work with and..... doesn't look jenky AF like the foil does. :) www.amazon.com/TitanRF-Faraday-Tape-High-Shielding-Conductive/dp/B07CRLCGCH/

LOL The cat in a tin foil hat :)

@RagTheNutsOff

3 жыл бұрын

hahahah indeed Lauren!

Empty calories. Love that.

@RagTheNutsOff

3 жыл бұрын

Hey Jim, its right though isn't it ;) Matt

@goku445

3 жыл бұрын

@@RagTheNutsOff I heard there were 2 weights embedded in the front of the nose on the Dart 250, 40g. Did you know? edit: never mind it was the full size Dart.