3 Reasons The Daicamping DL7 Is Superior In 2024!
Ғылым және технология
SQT 2048 A - amzn.to/3V30et7
EDC Mods Scale - www.etsy.com/shop/EDCmods?sec...
Daicamping DL7 - www.aliexpress.us/item/325680...
Amazon affiliate links help support this channel.
Amazon Store - www.amazon.com/shop/hvacbudget
Пікірлер: 48
The truth it that those scales actually cost $5 bucks to make. Leatherman stuff is always overpriced.
Fun stuff. I just got my Roxon Flex. As expected it has skyrocketed to my favorite multitool. I’ve already modded my scissors to allow for carrying 4 long implements. I’m actually carrying a SOG power pint and a leatherman ratchet driver with ball detent bits as my bit driver to go along with the Flex.
@hvacbudget8600
2 ай бұрын
Very cool! Sounds like a great tool kit!
This would be perfect if it had a large file on the outside 4. Or maybe a T grip adapter on one of the outside 4.
@IdleFete
2 ай бұрын
I’ve been using the titanium version in my edc. I wonder if there was enough room to change out the existing file or micro screwdriver and use that space for a t grip adapter.
@ironheadcj5
2 ай бұрын
You can remove the saw and put a full size file on it
I've been looking for a daily carry multitool for a while now and DL7 felt like the right choice. When it arrived I felt disappointed, it just didn't feel right quality wise, maybe it was this particular unit. I've returned it and got myself a Vic. Spirit X which I found for half the price new - now this one seems perfect for edc, especially that I don't need the clip. Coming back to DL7, I have a Mossy Oak tool with a quarter inch driver that locks in 2 positions, that one feels rugged and has proven itself great for minor house tasks. Only two downsides here are weight (around 350g without the bits) and lack of scissors. Bottom line is that if the scales are almost the price of the whole tool and you double it's value by modding it, it does become a bit senseless from the economic standpoint. But then again your making videos for a bunch of folks who "need" more than one edc knife and multiple multitools just for the sake of it - there's no place for economy in this hobby.
As a knifes guy mainly the flissa with g10 for 18 bucks is always with me nice and light and feels good in the hand like a knife I switched the scissors to the other side the the dont come up every time i deployed the blade 😊
@hvacbudget8600
2 ай бұрын
Very cool!
Those orange scales look real nice!
@hvacbudget8600
2 ай бұрын
Thanks!
@SharkoonBln
2 ай бұрын
Errrm... 42$ for 4 pieces of plastic? Manufacturing cost is probably around a quarter of a cent. You surely have to be an enthusiast to buy those. 🤭
Whay kind of steel are the blades?
Where is pocket clip?
@hvacbudget8600
2 ай бұрын
The pocket clip was from another multi tool.
"Uniquely yours, it's very satisfying" nuff said. You're as mad as the rest of us down here in Down Under. Future mods on vid.? DL7 got our approval.
@monkeylife2318
2 ай бұрын
Can you ear tthe thunder ? You better run, you better take cover... 😅
@unfi6798
2 ай бұрын
@@monkeylife2318 Lines from a song.?
Nextool now has a set of flat bits like leatherman for the e1 just to let you know
@hvacbudget8600
2 ай бұрын
Thanks!
a question please those expensive scales are for SERIE 1 or 2 ? is there a difference ? thanks in advance
@hvacbudget8600
Ай бұрын
Definitely series 2, not sure if the Charge frame changed from the first generation or not.
My main complaint with the clones is the blades. How is the grind and are the blades sharp out of the box?
@hvacbudget8600
2 ай бұрын
Mine seem fine, but at $50 I expect far less than a Leatherman as well.
I kinda like the clip on one's, most of these don't have
Is the sqt version identical to the daicamping model? I just ordered the sqt since I can have it tomorrow and am hoping to put some charge scales on it.
@hvacbudget8600
2 ай бұрын
Yes.
@ironheadcj5
2 ай бұрын
@@hvacbudget8600 awesome!....Thanks for this review!
Looks a lot like the surge/wave+
intersting- with the mod
@hvacbudget8600
2 ай бұрын
Thanks!
How is this different from the surge?
@hvacbudget8600
Ай бұрын
Cost 1/4" bit driver Rope cutter on serrated blade Lighter Titanium scales
Nerd alert in this channel lol… sorry couldn’t resist 😂
So do you like the dl7 over the sqt
@hvacbudget8600
25 күн бұрын
They are pretty much the same the DL7 and the SQT 2048A.
Fine, I'll take a neon pink one.
@hvacbudget8600
2 ай бұрын
LoL!
Are those scales just 3d printed? If so that realistically shouldn't even be sold for much more than $20 probably only $1 in material at most.
@hvacbudget8600
2 ай бұрын
Might be. I need to get a 3d printer! LoL!
@AtomicBleach
2 ай бұрын
@@hvacbudget8600 there really are some excellent multitool mods you can print. I plan on in the future getting a rack robotics diy EDM kit to make some of my own custom multitool parts.
What steel is used for blades?
@hvacbudget8600
2 ай бұрын
I believe 7cr13mov.
I believe 7cr13mov.
too bad about the file, a deal breaker for me unfortunately. I'll be staying with my DL30 for now
Just save a little more and buy a Leatherman. Life time warranty and best quality. This is so copied but you'll probably end up being another one when it fails and it will cost the same. I've had the Leatherman Charge TTI for 4 years now and ours still flawless.
Titanium for $50? Is this a Temu slave labour tool? I’m not touching something covered in blood.
Dis iz cheapo knockoffs