LITE BRITE NATION ↠ E3OffRoad - e3offroad.com ↠ Merch - www.litebritestudios.com ↠ Stickers - bit.ly/2Tt20Wh ↠ Facebook - bit.ly/2HatSru ↠ Instagram - instagram.com/litebritestudios

@rickroberts4294

4 жыл бұрын

L)

Those are some good looking welds. That guy has some major skills when it comes to welding.

@jdralston4116

4 жыл бұрын

Thanks man!

@SirEpsidufus

4 жыл бұрын

Very nice welds.

@ronkreed

3 жыл бұрын

You got that right. Master welder indeed.

@nathanizotic1757

3 жыл бұрын

@@jdralston4116 Hey dude, in conjunction with others, AWESOME fab work my man. I’m proud to say I just purchased as of today, my first ever suspension lift for my wife and I’s 18’ JLUS and we went with the JLU 4.5 Inch Adventure-X "No Limits" Long Arm Trail Runner System. I may be in need of your services here in the next 10-12 weeks (depending on when my kit arrives). I just got it confirmed by Maureen (She is awesome and has been a huge help on her end) from RK today that my order has been processed and my kit is going to be underway! How would I go about hiring your services my man?!

I’ve known a lot of awesome welders in my line of work and I have to say JD is top notch! This is shaping up to be a bad ass build.

@jdralston4116

4 жыл бұрын

Michael Dumont thanks man!

“Mr JD had laid down some pretty amazing dimes”. Love that you guys know and appreciate the details!

@philiphannum4211

4 жыл бұрын

BikeInHudson Sexy weld-pron.

@jdralston4116

4 жыл бұрын

That’s me, thanks guys!

@lonestarwindmill9185

4 жыл бұрын

JD Ralston they should get you a work bench so you can stop laying on the floor with jack stands! Great looking welds dude.

Have really been loving these last videos! This is my suspension but the shop that did mine certainly wouldn't let me watch much less film the process. So thank you for what you guys do. By the way I am telling people that when I met y'all at hot springs you saw my suspension and were green with envy and that's what made you do this. Happy new year and thanks for 2019 hoping 2020 is the best!!!!

I am so glad you guys were thinking outside of the box with the rear three link. People get hung up on what things are supposed to be like. As long as the numbers work out three links is just as good as four. As long as the tube is sized appropriately there is noting wrong with putting a bend in it. You gotta do what you gotta do to make things work. You aren't going to solve a complicated problem with rigid thinking.

Its really great that this shop and others give such access to work and record - I don't know of any shop where in my area that will let you watch or participate in the work ("Insurance reasons..."). So we get to watch your builds! I've always wondered why Jeep doesn't put underside armor/skid plates on their vehicles that are worth anything. I can't wait to see this "new" StepChild in person, and see what it weighs when you're al done! Happy New Year!

I just bought a JL this year, my first Jeep and have been watching your videos to get a good idea of what can be done. I've worked suspensions for cars and trucks, along with motorcycles for decades but these are some new considerations given all the "crawling" issues that don't go with ordinary road vehicles. Looking forward to my own trials in the near future. Thanks for some really good content, well including the engineering aspects. Very solid!

DANG IT I WANT TO SEE THE FINAL PRODUCT. love seeing this thing evolve

Yeeeeesss something great too watch with my coffee!!!!! Lots of love and respect for you Lite Brite

Ya the 3 link rear is sick and your new panhard bar will keep things tracking great in the rear 🇺🇸 RK. For articulation is gonna be huge can't wait for the next vid ??????????🤷‍♂️ still waiting hurry Britt I'm so anxious. Love you guy's so much be safe and see ya soon🇺🇸❤❤❤✌

I'm that guy who broke his only upper link on a 3-link setup (a custom job by a local 4x4 shop). 300 miles from home, in the middle of some nasty trails at The Cove, snapped the 3rd link rod end. This allowed the axle to rotate 90° down causing full bind and destruction to the u-joint. Fortunately, I stopped before the springs came unseated (thank you retaining clips) and the shocks got bent or broken. Recovery was a b*tch as I was pretty deep into the trail system. I could not source a compatible rod end anywhere. Fortunately, the upper CA brackets had been left in place and I was able to use a stock upper CA to drive home (while towing my pop-up camper). After that experience, I learned to always keep spare rod ends and a stock upper link in my trail kit (this actually might be a good video topic: what tools and spare parts are in your trail kit). BTW, if you've never been, The Cove has some awesome trails. If scheduling works out right, you should make the effort to go to one of the Big Dogs events at The Cove. Their website is fubar at the moment, but their FB page is Big Dogs Family Offroad LLC.

Not knocking the 3 link, I understand you guys don’t want to move the gas tank for emissions reasons. Big difference between the 3 link and double triangulated 4 link rear is the panhard bar. That is the source of alot of issues including binding, bump steer and keeping the axle centered when accelerating on an obstacle. An interesting 3 link rear setup that really caught my eye and one that I’m considering alongside the genright elite is made by Excessive Industries. They run a 3 link that eliminates the panhard in the rear. Huge heim on one end and a uniball on the other end. Requires 14” coilovers to work however.

That dude JD can weld SUPER nicely !! Wow. Good stuff

@jdralston4116

4 жыл бұрын

Michael Sullivan thanks man I appreciate it!

@Grumpy_old_Boot

4 жыл бұрын

@@jdralston4116 I'm guessing you have put quite a few hours into that welder ? 😂

@jdralston4116

4 жыл бұрын

Grumpy ol' Boot yessir I sure have 😂

@jasonstrout4502

4 жыл бұрын

@@jdralston4116 Hi if you had to guess about how many hours welding? Man I had to pause the video like six times to really look at those welds. What a great job so good dude keep it up guys. All of you are awesome people too boot. Badass;)

@jdralston4116

4 жыл бұрын

Jason Strout I’ve been welding for about 5 years now

“We’ve never seen one break ever “ said rock krawler ... well! Lite brite may your first lol 😂

@JustinKingOffroad

4 жыл бұрын

hahaha i was just thinking that too!

@phillipcraggs6202

4 жыл бұрын

LOL, has nobody at Rock Krawler seen Kevin drive?

@philiphannum4211

4 жыл бұрын

@@phillipcraggs6202 I have a feeling that they have not seen any of their videos, like the "Backdoor" video perhaps.

I started following your channel when I thought I was going to buy a JL Rubicon... some things changed and that is not an option right now... I keep watching because of all of the incredible content. I am learning so much about the technical details of all of this equipment and the platform, which I absolutely love being an engineer. Thanks for continuing to put out amazing content and not shying away from the technical portions.

Whenever Britt and Kev say bracket you have to take a shot. Cheers! 🍻 ❤️❤️❤️

danggg all those brackets looks better than oem,very clean job, amazing stuff.

Looks like Jelly is excited about the long arm upgrade too! 😂

man, that guy can weld !!!!...awesome.....

@jdralston4116

4 жыл бұрын

signals34 That’s me, thanks man!

@signals34

4 жыл бұрын

@@jdralston4116 Hey,JD !....that's some great work man....love the welds .....your excellent ! !!

Great video! That 3 link setup looks bulletproof! Oh and thanks for the Merch, I ordered AND recieved my purchase within the same week, and that speaks volumes to the dedication of your support to your fan base. I am a huge proponent of professionalism, and I love concision and clarity...you guys exemplify all of the above! And I genuinely THANK YOU!!!!!

Great to see this level of workmanship, impressive stuff by the crew working on this JL. Looking forward to your on road and off road driving impressions.

A lot of detail with with one the best jeep spokes people discussing the build. Good job Rock Krawler.

Ouch I think Kevin was picking on me I have been asking about moving the gas tank, I have egg on my face now, didn't realize that you would not pass emissions if you moved the tank this is why I love you videos I learn stuff. Great build!!!!!

Super cool build

Man that guy can stack some dimes!!!

@jdralston4116

4 жыл бұрын

Dan Hambrick Thanks man I appreciate it, that’s me!

@errhka

4 жыл бұрын

@@jdralston4116 that was some of the most beautiful welding I've seen! You are really talented!

@jdralston4116

4 жыл бұрын

Errhka Thank you!!

Just a recommendation.. When you take your axle to bare metal and weld brackets and such and then paint them. Still metal to metal under brackets and welds. We use steel-IT paint then weld it. It is a weld able paint. That way no metal is left bare. Im not sure it matters but piece of mind for 20 bucks.

What happened to doing all the badge of honor trails?

@boughtnotbuiltoffroad7784

4 жыл бұрын

Mike & Susan’s Adventures we’re doing them. Just at a slower pace

@lonestarwindmill9185

4 жыл бұрын

Kevin Williams Kevin, when you do Black Gap in BIg Bend Natl Park /WTexas I Double Dog Dare you to contact me. Not a lot of hard trails in the area but can show you trails that the average tourist doesn’t have access to.

@Sandppy

4 жыл бұрын

Lone Star Windmill you ever get a chance to do the dry river bed in San Antonio?

@lonestarwindmill9185

4 жыл бұрын

Mike & Susan’s Adventures no we haven’t. Tell me about it. We live in far W TX near Big Bend Natl Park. So we’ve mostly done the trails in and around the park. Started doing them in the State Park. Did Hidden Falls adventure park in August.

@Sandppy

4 жыл бұрын

Lone Star Windmill haven’t been there since mid 2000s, but it is an flood by pass for the San Antonio river, so have to watch weather reports closely including areas 100 miles north of. Lots of rock broke up concrete, remnants of old neighborhoods that where washed away.

did it without pulling the exhaust... pans over... bleeding hands hahahaha!! that guy's good for sure!

I actually lost count of how many actual times Brittany actually said actually!!! LMAO!!!!! Happy New Years Jeepers!!!!!!! Love the channel.

Some pro's and cons you missed. Pro : In some long-arm builds, you get less acute angles on your driveshaft, essentially making it wear more evenly, and less likely to snap. Con : A 3-link suspension has to have a panhard rod, which can get in the way of other stuff. Pro/Con : Jelly will attack your shoe, and possibly try to mate with it! 😁

@eliinthewolverinestate6729

Жыл бұрын

I run a parallel 3 link no track bar. Wishbone upper and slightly triangulated lowers no track bar.

@Grumpy_old_Boot

Жыл бұрын

@@eliinthewolverinestate6729 Interesting ! But did Jelly Belly attack your shoes ?

honestly I wouldn't worry about the hydro assist considering all 3/4 ton and up trucks have used hydraulic steering and still do in all cases I'm aware of. As a side note all plow trucks love them because the light duty electric rack and pinion camt pushed heavy snow put of the way of the tires when you need it to... I hated my 1500 chevy because of its electric rack and pinion steering all comfort no work

Lordy, More additions to make this Jeep more awesome and bullet-proof! Way to Go!

Those welds are as pretty as Britt!

Coil overs next?

Stacked off road is 5 min from me and didnt know!!!! AWESOME!!!

21:00- at conclusion of detailed 3link choice...Britney changed from tour guide to BOSS..."still talking?..get back to work!" 😊 Edit: not saying a word about where/how Jelly learned to Humpty Dance

Beautiful welds! Goals 😄 Fun watching this process. Most badass JLU ever! ❤️🐞

Are you doing 3.5" or 4.5" lift. RK's website says 40" tires at 3.5" require fender mods...but it doesn't look like you have them (yet). And of course, how they get the 13" collapsed, 28" extended shocks to work when their spec is for 18"-20" collapsed, 30"-32" extended. The MetalCloak 6Pak has more than enough travel, but the length would be off. Custom, raised lower shock mounts? Also, have you pointed out that this requires a front axle housing with the front axle disconnect removed. That is a major expense, more than $2600 for a Rubicon and over $5k for non-Rubicons. This Rock Krawler X-Factor long arm kit is $4k without shocks, and IMHO one of the best suspensions available for a JL, JT, or JK. But that housing requirement definitely ups the cost. BTW, Fox 2.5 Race Series shocks in the required lengths would add over $2300 (at discounted prices). The 2.0 Performance Serice would add $600, but they wouldn't have a reservoir. That's about $7.1k-$9k total (Rock Krawler 3.5 X-Factor Long Arm kit, Dynatrac ProRock44 front housing, and Fox Shocks). A non-Rubicon owner would probably want the Dynatrac Trail Leader package which includes the complete ProRock 44 front plus Cr-Mo axles and matching locker and ratios for the rear. Probably $6600.

Awesome bringing in the guy to talk the tech with the 3 link, great info

Let's see it in action! Can't wait 😊

Awesomeness....love that your showing the process....great detail....Stepchild is looking more amazing.....Jelly was excited playing with a new friend 🐶.....eagerly awaiting the next video.....Safe travels

Look like a very sturdy mount to me, and those guys seem to be very good at their job too, i don't see any problem there; also, did you notice how well and comfy that thick hoodie with a zipper on the front and the big logo on the back did look??, it's amazin'...!, sumer ready...? winter ready!; perfect. Also too, seems that Jelly it's growing now, don't you think that.. maybe you should talk to her about the "bees and the flowers" and all that?, just saying... anyway guys; if i don't see you before the new year, have a really really good and happy new year. Stay well and be safe on the road

6:00 am, java and donuts and get to watch the Stepchild develop some serious "Bitch'in Attitude" without any apologies. Oh yow, ROCK'IN INTO OBLIVION! Hang on, ya'all are going to love this conversion.

Just when I was bored....y'all come through video!! Way to be!!

Love the built!!!

Lovin the build. Can’t wait to see the rest an seeing it rip the roads and trailers. Jelly was lookin little frisky. Lmao.

Pam cooking spray for rust proofing maybe it will work on the Step Child N.Y. Salt sticks like glue.

How's the new 3 point handle coil overs thou

WOW! You weren't kidding when you said he was the "master welder". Those look amazing!

Very nice welds but vertical down ?

God the Stepchild has become one of the most insane builds. I hope i get there one day.

Big fan, and nice to see you guys in my backyard just 10 minutes from where I work. One of my coworkers lives next door to the shop you're at and has been telling me about the fine work he's seen them do. I'll probably be hitting them up soon for some suspension advice for my lifted 2017 JK as they look like they really know what they're doing. From what I've seen looks like you're staying in the "big city". If you want a good meal and some suds, stop in at Browns in Troy right on the river. Be cool to join you for one and maybe talk up this part of the cold northeast as I think this may be the closest I may ever get to you.

@Whiteandsonsgarage

4 жыл бұрын

Dented Halo I think you should go around to your mates place for a beer

Well that was very interesting. Lots of work and those guys are great at what they do. I’m learning a lot and loving it. Can’t wait for more!

Absolutely killer welds. A true craftsman.

Can't wait to see you guys wheel The Stepchild and see how it performs! Been thinking about a long arm on my JK.

So awesome how fast you guys have become an off-road superpower.

If a 3-Link can be broken, Brittany & Kevin accept the challenge! 🤣

I bought this exact long arm kit two weeks ago. Taking it to the shop today for the install. Can’t wait. Hope it works for both of us.

@dobrzpe

4 жыл бұрын

just out of curiosity, would you mind letting me know what they quoted you for install? can't find any info online for ballpark install costs!

@ahobbyist596

4 жыл бұрын

dobrzpe say about $3k for the long arm kit without shocks and roughly $1.5k for the install.

@jasondevereaux3369

4 жыл бұрын

That's freaking awesome for you! Merry Christmas! 1500 for install seems like a steal. This kit looks beast. 👍👍👍👍

@boughtnotbuiltoffroad7784

4 жыл бұрын

Charles Williams 1500 is a steal for labor for this kit. I’d say it’s easy 30 hour job if not more

@georgegrimes4937

4 жыл бұрын

Charles Williams you will love it!!! I've been on it for a year and a half and it's a beast.

So should frame strengthening be looked into after all the mods?

@boughtnotbuiltoffroad7784

4 жыл бұрын

Within the Glass nah

@Grumpy_old_Boot

4 жыл бұрын

@@boughtnotbuiltoffroad7784 Yah … you had to reweld that aluminum bar thingy … so yes, you should at least look into it, even if you end up not doing it, it's a good idea to know in advance. Informed choices and all that .. like .. being an adult!

@LiteBrite

4 жыл бұрын

It would probably be the responsible adult thing to do... I wish we had one of those around... 😅😅

@Grumpy_old_Boot

4 жыл бұрын

@@LiteBrite Oh dear … I think I have one of those lying around, want to loan one ? You just have to pet it once in a while, and maybe feed it cookies as well. 🤣

Those guys are awesome and JD is an amazing welder!! Go Jelly!!

The hemi is cool but IMO suspension is cooler, you guys explain your setup extremely well, and my takeaway from this is I’m gonna stick with steel skids. I’m a Taco guy but in the foreseeable future, a Jeep for my 2nd vehicle.

Dang cliffhangers! I should have waited until they were all posted and binge watched :)

Awesome video, liked all the install views. Thanks, looking forward for the next episode.

I love how Brittany simplifies it for me❤️ ...still happily learning over here😝

@LiteBrite

4 жыл бұрын

Hey krissy, contact me on IG or the fb page if you have any questions or want to know more or just to say hi! :)

Great looking welds and eliminating the upper control arms should increase available flex! And soon, we'll confirm that these guys didn't sleep through Geometry class!

Excellent Vid as usual guys! Thanks for the explanation on 3 vs 4 link rear. I'd like to see a bit more on the front suspension set up before you conclude this series and drive off into the next adventure.

It's going to be awesome! Now hurry up and wait! lol.

4 link with a broken link is still not driveable, the axle is still gonna wonder around coz there's no panhard

@wheels.and.wrenches

4 жыл бұрын

A 4 link requires a panhard. A triangulated 4 link does not.

Random watching litebrite today 👀😂

Nice work. Love the welds David is doing. So cool. Just hate the waiting for the next level.

well now i see why you put a 3 link in and not a 4 link i forgot about the gas tank. my TJ has a triangulated 4 link with no rear track bar.

Please please please ease ppppleeeeaaassssseeeee hit an rti right after it's done! I can't wait to see how the step child flexes!!

@jaimecondejr7721

4 жыл бұрын

I'm also interested in seeing how it was short arm vs long arm. Metalcloak vs rusty krawler

All i would like to know is how much did it cost from start to finish for the suspension upgrade?

Awesome video

Damn, I miss you guys. I hope you guys had a joyous Christmas and have a Happy New Year. Kevin, you will love the new setup! Step Child was already a bad ass rig, just wait. Your whole driving style will change and your approach to obstacles will too. Good thing you have the best spotter in the whole world. I can't wait to see what you do with your shocks. Luv u guys 🤙🤗👍ps taking my 5hr old daughter to the snow for the first time. Wheeling in Lockwood Valley above Gorman Ca.

Sweet ! Jelly ! Love all that burning in!

Wish there was a just the rear "full" kit for jk/jl.

Another great clip. The next one I'm really looking forward to when ya'll go over travel limitations and setting everything up. Looks like there is a ton of adjustability. Lol jelly has been watching and just wants some lol

Likely one of most expensive JLs on the road. But damn it’s sweet!

Thanks for the video 👍🏾👍🏾. Sorry. I have to play catch up.

At this point, this build really deserves a trailer and tow rig.

@LiteBrite

4 жыл бұрын

It’s probably somewhere in the future!

WoW! Your Jeep is going to weight as much as a Duece and half. But it will be strong and articulate. Your going to need more gas cans. Nice video. Thanks

Just curious, did you guys have to do a lot of adjustment to get the MetalCloak under armor to work with your Hemi install?

That trackbar bracket is a little bit smaller holy crap. why not triangulated four link?

After all this upgrade do you need to get new drive shafts?

Hey guys, so is it worth it buying the Elite ProRock XD60/80? Since you guys travel all over the country does it feel sluggish like you carrying a lot of unwanted weight around or does it drive like a 1 ton truck?

Incredible. The Amount of Upgrading you've done to The Stepchild

When are you going more crazier, the next step in suspension. A visit Diezel in North Carolina / Stacked Offroad I would also like to see more info of the rockrawler shocks / bypass & coil over kits ????

@LiteBrite

4 жыл бұрын

That’s happening in August

Tried their steering components?

Still Loving this series!! Will Rock Krawler build suspensions on other vehicles besides Jeeps?

@LiteBrite

4 жыл бұрын

They currently make a ton of suspension for other vehicles as well! Lots of trucks through their sister company!

if you put a panhard bar on your 3 link is it really a 3 link?

wait you were in ny? drats missed ya again

all questions answered..way to go!! nice truss+bling! ;)

Tips on the exhaust that may be in the way?

Great vid Kev and Britt.

How long r u guys staying in ny for?

Where can I find your full mod list? I lost track of things I want after your watching 3 videos.

@LiteBrite

4 жыл бұрын

We have our build on RevKit

I wonder why they didn't go triangulated 4 and completely eliminate the rear track bar? They have a jku not a JK so they should have the room for it

While I'm busy asking questions...isn't the rear upper arm 6" shorter than the lower arms? If so, doesn't that cause the pinion to angle down in droop, and if so, how does RK handle that?