3 Different Ways To Modify A Honda Civic Type R EP3 With £2000!! 4K
Looking to start modifying your Honda Civic Type R EP3 but unsure on what to spend money on? Or maybe you just want a few ideas on what you can achieve with a budget of £2000?
SUBSCRIBE to watch more videos: / ollyross
FOLLOW ME on my Socials:
INSTAGRAM: / sollyross
TWITTER: / sollyross
£2000 to spend variations
Handling:
YELLOW SPEED RACING YSR DYNAMIC PRO SPORT COILOVERS HONDA CIVIC EP3 01-06: www.tegiwaimports.com/select-...
SUPERPRO CASTER INCREASE FRONT COMPLIANCE LOWER ARM BUSHES CIVIC EP3 INTEGRA DC5 TYPE R: www.tegiwaimports.com/select-...
TEGIWA REAR CAMBER ARMS HONDA CIVIC INTEGRA TYPE R EP3 DC5: www.tegiwaimports.com/select-...
Michelin Pilot Sport 5 Performance Road Tyre 215/45/17 91Y XL Extra Load: www.tegiwaimports.com/micheli...
GENUINE HONDA JDM FRONT ANTI ROLL BAR CIVIC TYPE R EP3 ARB: www.tegiwaimports.com/select-...
Fast road Set up at Motion Motorsport
Total cost £1979.20
Performance:
ENERGY SUSPENSION ENGINE MOUNT INSERTS CIVIC EP3 INTEGRA DC5: www.tegiwaimports.com/select-...
TEGIWA CARBON AIRBOX HONDA CIVIC TYPE R EP3 RED BREATHER: www.tegiwaimports.com/select-...
Airtec Motorsport MIL EML O2 Sensor Light Cheater Angled Spacer: www.tegiwaimports.com/select-...
TEGIWA 70MM CAT BACK EXHAUST HONDA CIVIC TYPE R EP3 01-06: www.tegiwaimports.com/select-...
Honda Civic EP3 2.0 Type R 00-05 - 4-2-1 Exhaust Manifold: www.japspeed.co.uk/product/ex...
OR
TEGIWA EXHAUST MANIFOLD HEADER CIVIC EP3 INTEGRA DC5 01-06: www.tegiwaimports.com/select-...
£204.51 difference in manifold cost
SKUNK2 ULTRA SERIES STREET INTAKE MANIFOLD HONDA K-SERIES K20A: www.tegiwaimports.com/select-...
POWERFLEX TOP GEARBOX MOUNT INSERT CIVIC EP3 INTEGRA DC5 TYPE R: www.tegiwaimports.com/select-...
Total cost £1946.96
Aesthetics:
EP3 Fibreglass FX Rear Lip: www.fiberworxonline.com/EP3-Fi...
EP3 Fibreglass Air Walker Style Front Lip (Facelift): www.fiberworxonline.com/EP3-Fi...
SPOON BLUE WIDE REAR VIEW MIRROR HONDA CIVIC EP3 TYPE R 04-06: www.tegiwaimports.com/spoon-b...
HARDRACE GOLD REAR LOWER CONTROL ARMS LCA RUBBER BUSHES 2PC SET HONDA CIVIC EP3 01-05: www.tegiwaimports.com/select-...
EP3 SPARK PLUG COVER - CARBON FIBRE - K20 CIVIC: www.carbonmyride.com/collecti...
Genuine Honda x Mugen Rocker Cover Honda K-Series K20 Wrinkle Red: www.tegiwaimports.com/genuine...
SPOON RADIATOR CAP - TYPE D: www.tegiwaimports.com/spoon-r...
CARBON FIBER FRONT GRILL FOR 2004 2006 HONDA CIVIC EP3 3DR FACELIFT: www.hzdynamics.co.uk/2005-ep3...
Honda Civic EP3 Type R Mugen Spoiler with Carbon Fibre Blade: deltastyling.com/buy/honda-ci...
EP3 PLINTH COVER - CARBON FIBRE - CIVIC MK7 2002-06: www.carbonmyride.com/collecti...
EP3 DOOR PILLAR COVERS - CARBON FIBRE - CIVIC MK7 2002-06: www.carbonmyride.com/collecti...
EP3 SLAM PANEL - CARBON FIBRE - CIVIC MK7 2002-06: www.carbonmyride.com/collecti...
Total cost £1994.89
Subscribe if you want to watch other videos by me:
/ ollyross
#EP3 #Civic #TypeR #Modifications
Пікірлер: 72
Your videos are stepping up another level, AGAIN! I hope the day where you debate selling your ep3 never comes. Keep up the sick work man!
@OllyRoss
Жыл бұрын
Thanks man! I am glad you are enjoying my content! I hope that day never comes too! It really is an amazing all rounder! I have some cool stuff coming for it too.
Lovely car man, it's give me some inspiration and ideas for mine when i've got some spare cash about. Thanks for the details and informative videos, top content
@OllyRoss
Жыл бұрын
Thanks man! I am glad you have found it useful too
Awesome video! Will for sure be doing most of these mods 💯
@OllyRoss
Жыл бұрын
Thanks man! I am glad it is useful for you!
This is not the time for this Olly, the car has MADE ME POOR
@OllyRoss
Жыл бұрын
Hahahahaha! Well, pretend that you haven't seen it and then come back to it when your bank account feels ready to take another hit!
@tig_229
Жыл бұрын
@@OllyRoss Christmas is happening mate😂 Long way away yet!
Overdue on a video like this! Keep it up 🙌
@OllyRoss
Жыл бұрын
Nice one! I am glad you found it useful!
Sick video...just bought an ep3 absolutely love it! Already modified it in 2 weeks its addictive😅 few ideas off this video too👊
@OllyRoss
Жыл бұрын
Thanks man! Congrats on the car! Glad you are enjoying it! I am glad you have found this video useful for some mods.
Great vid bro 💯 Car looks sweet asf 👊🏻
@OllyRoss
Жыл бұрын
Thanks man! I am glad you like it!
Very very useful video. Great job Ollie
@OllyRoss
Жыл бұрын
No worries! Glad you have found it useful!
Great advice, installed my Tein Monosport coilovers last week but haven't got them set up yet. Going to Motion this week for a fast road setup and new arms all around, can't wait. 👌👌 Got the Spoon mirror in my Accord and Civic too, it's a must-have for me.
@OllyRoss
Жыл бұрын
Nice one! That is going to be a huge transformation! Yeah, the Spoon mirror is really useful for blind spots and general visibility!
@Liam-mt1fg
Жыл бұрын
@@OllyRoss Huge transformation is an understatement! Car is insane now, big heavy 4-door saloon and it's so nimble around corners when I should be off a cliff. 😂Props to motion 👌👌
@OllyRoss
Жыл бұрын
@@Liam-mt1fg See!! I can never explain how good it is until you experience it yourself! Glad you agree with me though! Game changer!
Your videos make me miss mine so much 😓 keep it up would love to come to the UK one day and check out the scene 💪
@OllyRoss
Жыл бұрын
Time to get another one! Haha! If you do plan on a trip, we have an unbelievable Japanese car show at the beginning of May that is a must every year for me.
I'm getting one of these and this video helped a lot thanks
@OllyRoss
Жыл бұрын
That is great to hear! I am glad you have found it useful!
Solid fab exhaust LSD Lowering springs Rear anti roll bar Job done.
@OllyRoss
Жыл бұрын
Yeah, that is a pretty solid list!
Very informative video Olly. Be interested to see something similar for your S2000 even though it’s still in the early stages.
@elliot438bcfcVTEC
Жыл бұрын
Bought mine near stock this year and I've only done a handful of mods but ones that I'd say worth it
@OllyRoss
Жыл бұрын
I am glad you have found it useful! I may do it when I have learnt a little more about the car really. Also, £2000 on an S2000 doesn't go too far! Haha
Bought my usdm ep3 back in the mid-2000's because I couldn't afford to buy the other performance cars of the era. Turned out to be one of my favorite cars I've owned. Still haven't modded it but one day I'll do a turbo k20/24 swap build.
@OllyRoss
7 ай бұрын
Love to hear it! That engine set up will make it a completely different car! 🙌🏻🙌🏻🙌🏻
Depends on the goal of the car. If it's for track use I'd get a proper wheel and tyre setup. If it's for road fun then maybe an exhaust and intake and lowering springs. If it's track only then sell the cat😜
@OllyRoss
Жыл бұрын
That is very true to be fair! I was just assuming people wanted to build a street car. Haha
you can replace them bushings and springs on any car makes it drive like brand new in your own driveway with basic tools
@OllyRoss
4 ай бұрын
For sure! Makes a huge difference
Another brilliant video. Your videos are what got me interested in the EP3. Looking into getting one but insurance quotes are around £300 a month for a 19 year old :/
@OllyRoss
Жыл бұрын
Thanks man! That is so rad to hear! I am glad the videos show how fun this car is to own! That is a big one for insurance. I didn't get mine until I was 22 and had a few years of No Claims to bring the cost down.
@benlawrence6471
Жыл бұрын
Try putting a parent as registered owner, planning to buy one of these soon at 18(1year ncd) with insurance quoting just over 600 a year😳
i have an ep3 si 03 and wanna turn it into a type r or even something better, definitely want to get the whole type r kit to make it look better
@OllyRoss
Жыл бұрын
Are you based in the US? If so, the RSX Type S has the K20a2 that the UK Type R has. The Type R Kit would help with the looks for sure!
Just a question at 3:07 your little bushings that go on either side of the large round control arm bushing seem to be upside down, compared to the super pro website or did you do that on purpose?
@OllyRoss
Жыл бұрын
Yeah, they are upside down and got flipped but it was the only shot I had of them
Hey Olly, For the tyres - would you consider 225/40/17? I've slapped on some gc101g's on mine and was considering that spec, but currently running safe with 215/45/17.
@OllyRoss
Жыл бұрын
My only concern on my personal car is that I would rub in the rear arch with a 225. A 225 would fit on the front without any issues I reckon
Hi mate, where did you get those bolts and washers for fitting the slam panel? Small touch’s but makes all the difference.Thanks Think I’ve just come across them on tegiwa website engine bay bolts and washers 👌
@OllyRoss
Жыл бұрын
Hey man, the Tegiwa ones will work for most of the engine bay but you will need a rubber well nut to mount the front grille. This is what I am using for that: www.ebay.co.uk/itm/194721618967
@G30_media
Жыл бұрын
@@OllyRoss ahh okay thanks a lot for the info 👌👍👍, moving from an Ibiza Cupra mk3 which I had for 8 years was a great car, but now just getting involved with the ep3 actually so much easier to find parts for the civic that’s for sure
Would you recommend buying this stock then doing the specs you mentioned or would it be better saving and buying the jdm white
@OllyRoss
Ай бұрын
If you have the money, get the JDM one. 👍🏻
@Lostboy-007
Ай бұрын
@@OllyRoss appreciate it pal 🙏
Any issue with bump steer? Or I assume you didnt lower your car too much.
@OllyRoss
Жыл бұрын
I haven’t lowered my car too much so I haven’t found it to be much of an issue for me
How does the Tegiwa intake perform in the rain? does it have a drain?
@OllyRoss
6 ай бұрын
I have never had an issue. Yeah, there is a drain hole on the bottom before the filter
Once mapped, how much power would the performance mods make?
@OllyRoss
Жыл бұрын
With it being N/A, don't expect big numbers. You should see a 40hp peak power gain. I gained 50hp in the midrange though! That transformed the car!
Great video, on the performance part how much would a ecu and map add to the £2000 does anyone know?
@OllyRoss
10 ай бұрын
It depends on which ECU and mapper you choose really. Roughly I would say it’s another £1000-£1500
Couple of comments. If you're adding the engine mods obviously you'll be getting it mapped which means u won't need the spacer for o2 sensor as its mapped out so u won't get a warning light. In terms of your suspension mods a thicker front anti roll bar is the exact opposite of what u want, a thicker rear anti roll bar helps the front turn in better whereas a thicker front anti roll bar actually gives a bit more tendency for understeer.
@OllyRoss
8 ай бұрын
I guess it depends on when you are planning to get it mapped. Right away, then yeah, it is unnecessary. However, if there is a gap between install and mapping, just having the light off on the dash is worth having the spacer. Haha! The front anti roll bar isn't a thicker one, it is a different shape to allow for JDM designed exhaust manifolds to fit as the JDM EP3 had a different standard manifold design to the UKDM cars
@paullewis7287
8 ай бұрын
@@OllyRoss ah yes I remember when I had my dc5 I'd heard that when I bought my manifold some would fit ep3s and some wouldnt
Where do you go to get it mapped
@OllyRoss
Жыл бұрын
Depends on where you are based really.
I have a mint low mile pre face lift model garaged I’m in my 50s definitely a future classic don’t sell yours👍😘
@OllyRoss
Жыл бұрын
Nice one! I don't blame you! Yeah, ideally I never want to sell mine.
The £2k is parts only I guess, as labour would be another £1k
@OllyRoss
8 ай бұрын
Yeah, it’s just parts. A lot of this would be possible to install by yourself though
Shit looks too clean
@OllyRoss
6 ай бұрын
I will take that
I was few minutes in. Why doesn't he explain why the coil overs are better?? It's like we'll ok. Why don't tell us WHY??
Poor brakes poor head lights lol