Will it work? What is involved? Let’s figure it out!
Жүктеу.....
Пікірлер: 22
@toYOder Жыл бұрын
I did the same mod and i made the same mistake of pulling that gearset out too far as well. Lol. Had a hell of a time trying to reinstall. 😂
@erickstiner1668 Жыл бұрын
Great video. Informative and cool at the same time.
@turbostoybox2182
Жыл бұрын
Thank you!
@isaacsalberg8760 Жыл бұрын
Following this. Looking forward to seeing how you wire everything up.
@turbostoybox2182
Жыл бұрын
So I will only be wiring for the dash light. I am going to be running solid axle with lockouts in front
@isaacsalberg8760
Жыл бұрын
Gotcha, yeah I’ve got IfS and lockers and I’m kinda wanting to stay that way for now. I wonder if it’s easier then SAS for the transfer case anyways
@4wheeltrips Жыл бұрын
Your wife is a much better sport than mine.
@loganmayerr9 ай бұрын
Have you done the wiring yet for the dash lights? If so, have you made a video on it? Where can I find that info
@turbostoybox2182
9 ай бұрын
kzread.info/dash/bejne/paWuq5miid23hqg.htmlsi=srsOiF86UrSlxcG1 This is where I went thru and figured out the lights. Hopefully this helps!
@94myaccount Жыл бұрын
Did you end up removing the small ear on the 2/4wd rods? It appears the 4wd goes backwards and the ear would not affect it…?
@turbostoybox2182
Жыл бұрын
Yes I did have to grind that off. Used a 2” cut off wheel on a die grinder.
@OVRCRWLR5 ай бұрын
I’m about to do this same swap on my 3rd gen Tacoma. I’m curious, you skipped the entire tab removal, did you end up disassembling the entire case or did you figure out another way?
@turbostoybox2182
5 ай бұрын
Sorry I must have skipped filming that. I ended up stuffing the hole with rags to catch metal debris and cutting it off with a borrowed dremel tool with a tiny cut off wheel.
@OVRCRWLR
5 ай бұрын
no worries, i know how that goes. That's good enough, i was going to attempt that before anything else anyway. Thanks for the info and making the video.
@justgonnasendit8024 Жыл бұрын
What year fj tcase can u use and does it bolt directly to 2nd gen Tacoma transmission my truck is a 4cylinder 5speed as well are all the bolt holes the same ??
@turbostoybox2182
Жыл бұрын
07-14 FJ cruiser automatic transmission. That case is a direct bolt on once you swap the little adapting coupler.
@justgonnasendit8024
Жыл бұрын
@@turbostoybox2182 thanks man I appreciate the quick response
@turbostoybox2182
Жыл бұрын
@@justgonnasendit8024 No problem!
@dantejubert869212 күн бұрын
just got my transfer case for my 5spd taco and I am getting it ready for install. is there any adjustment on the driveshaft length I should be worried about?
@turbostoybox2182
12 күн бұрын
@@dantejubert8692 Nope, stock driveshafts work front and rear.
@dantejubert8692
12 күн бұрын
@@turbostoybox2182 sweet! Thanks for getting back with me so quickly. This swap has hopefully saved me the headache on diagnosing all the electrical bs, being that my 4wd is not reliable anymore. ADD solution after swapping?
@turbostoybox2182
12 күн бұрын
@dantejubert8692 Can’t help you there. I was doing this with the SAS.
Пікірлер: 22
I did the same mod and i made the same mistake of pulling that gearset out too far as well. Lol. Had a hell of a time trying to reinstall. 😂
Great video. Informative and cool at the same time.
@turbostoybox2182
Жыл бұрын
Thank you!
Following this. Looking forward to seeing how you wire everything up.
@turbostoybox2182
Жыл бұрын
So I will only be wiring for the dash light. I am going to be running solid axle with lockouts in front
@isaacsalberg8760
Жыл бұрын
Gotcha, yeah I’ve got IfS and lockers and I’m kinda wanting to stay that way for now. I wonder if it’s easier then SAS for the transfer case anyways
Your wife is a much better sport than mine.
Have you done the wiring yet for the dash lights? If so, have you made a video on it? Where can I find that info
@turbostoybox2182
9 ай бұрын
kzread.info/dash/bejne/paWuq5miid23hqg.htmlsi=srsOiF86UrSlxcG1 This is where I went thru and figured out the lights. Hopefully this helps!
Did you end up removing the small ear on the 2/4wd rods? It appears the 4wd goes backwards and the ear would not affect it…?
@turbostoybox2182
Жыл бұрын
Yes I did have to grind that off. Used a 2” cut off wheel on a die grinder.
I’m about to do this same swap on my 3rd gen Tacoma. I’m curious, you skipped the entire tab removal, did you end up disassembling the entire case or did you figure out another way?
@turbostoybox2182
5 ай бұрын
Sorry I must have skipped filming that. I ended up stuffing the hole with rags to catch metal debris and cutting it off with a borrowed dremel tool with a tiny cut off wheel.
@OVRCRWLR
5 ай бұрын
no worries, i know how that goes. That's good enough, i was going to attempt that before anything else anyway. Thanks for the info and making the video.
What year fj tcase can u use and does it bolt directly to 2nd gen Tacoma transmission my truck is a 4cylinder 5speed as well are all the bolt holes the same ??
@turbostoybox2182
Жыл бұрын
07-14 FJ cruiser automatic transmission. That case is a direct bolt on once you swap the little adapting coupler.
@justgonnasendit8024
Жыл бұрын
@@turbostoybox2182 thanks man I appreciate the quick response
@turbostoybox2182
Жыл бұрын
@@justgonnasendit8024 No problem!
just got my transfer case for my 5spd taco and I am getting it ready for install. is there any adjustment on the driveshaft length I should be worried about?
@turbostoybox2182
12 күн бұрын
@@dantejubert8692 Nope, stock driveshafts work front and rear.
@dantejubert8692
12 күн бұрын
@@turbostoybox2182 sweet! Thanks for getting back with me so quickly. This swap has hopefully saved me the headache on diagnosing all the electrical bs, being that my 4wd is not reliable anymore. ADD solution after swapping?
@turbostoybox2182
12 күн бұрын
@dantejubert8692 Can’t help you there. I was doing this with the SAS.