it helped for easier shifting and if ure bike moves without hitting the gas if ure in gear
@xXlBlazeXx6 жыл бұрын
i springs go in first and the caps go on top of the springs then push and hold them in and slide the sleeve on turn it till u hear a click
@paulcarpenter74293 жыл бұрын
Great video. Thanks
@kelvenguard4 жыл бұрын
Thanks My Bearings are heated and welded to the shaft... MUST BE
@alenbegonja4186 жыл бұрын
Thanku.Did it help for easier shifting?which way do the springs go in cup side first or ?
@junior95601 Жыл бұрын
Thank you
@nathanhladky2 жыл бұрын
What is torque spec for reassembly?
@JuanRamirez-dv4ou3 жыл бұрын
I took mine off n discovered it was missing those two springs n lil pins...what should I do....
@xXlBlazeXx
3 жыл бұрын
need to get ahold of them probably haft to get another bearing to get them... not sure if they sell them separately
@alenbegonja4186 жыл бұрын
Any greasing needed
@xXlBlazeXx
6 жыл бұрын
the bearing is pretty sealed and pre-greased should not haft to but im sure it wouldnt hurt if ure a grease monkey just remember it gets hot in there
@youfixitatvutv
5 жыл бұрын
Yes. He did not grease. It takes kluber isoflex 52. His is gonna wear out in no time.
@kelvenguard
4 жыл бұрын
@@youfixitatvutv My New Factory Bearings from CAN-AM dealer have a white/clear grease in them... Looked like NO grease until I opened the package and rolled the bearing
Пікірлер: 16
it helped for easier shifting and if ure bike moves without hitting the gas if ure in gear
i springs go in first and the caps go on top of the springs then push and hold them in and slide the sleeve on turn it till u hear a click
Great video. Thanks
Thanks My Bearings are heated and welded to the shaft... MUST BE
Thanku.Did it help for easier shifting?which way do the springs go in cup side first or ?
Thank you
What is torque spec for reassembly?
I took mine off n discovered it was missing those two springs n lil pins...what should I do....
@xXlBlazeXx
3 жыл бұрын
need to get ahold of them probably haft to get another bearing to get them... not sure if they sell them separately
Any greasing needed
@xXlBlazeXx
6 жыл бұрын
the bearing is pretty sealed and pre-greased should not haft to but im sure it wouldnt hurt if ure a grease monkey just remember it gets hot in there
@youfixitatvutv
5 жыл бұрын
Yes. He did not grease. It takes kluber isoflex 52. His is gonna wear out in no time.
@kelvenguard
4 жыл бұрын
@@youfixitatvutv My New Factory Bearings from CAN-AM dealer have a white/clear grease in them... Looked like NO grease until I opened the package and rolled the bearing
is 2009 considered 2nd gen?
@xXlBlazeXx
4 жыл бұрын
No 2012 and up is 2nd gen
@user-yi8pf8on6w
4 жыл бұрын
@@xXlBlazeXx thanks!