Ever wanted to start a KZread Channel for your business? Let me help you like I've helped dozens of entrepreneurs start, grow, and monetized their channel to create a new source of income and increase their sales plus grow their personal brands and following. DM on IG here: instagram.com/reyestheentrepreneur/

@tajaywynter6758

Жыл бұрын

Which software you use to make the design?

@thesmoothtouch5775

10 ай бұрын

kindly help me on how to motenize my youtube account

I started my business just like this a little cutter in my house and friends lol now I have 3 stores. Never forget where we come from or we won't know where we are going keep up the good work brotha.

@sebastianlarios7723

4 жыл бұрын

Elite Graphics this right here , your comment is my current goal in life ! I’m barely starting , barely ordering supplies.. but my goal is to have multiple stores where I can employ my friends and just work for myself... you are a real inspiration to people like me

@412psekustomzllc7

4 жыл бұрын

Do you have advise on which vinyl plotter to purchase for a starter? I need a plotter that will cut reflective vinyl. I am on a bit of a budget. What can you suggest?

@danhuxtable4617

4 жыл бұрын

Awesome! Hope business is going well in these crazy times!

@redraiderrider3289

4 жыл бұрын

Except when you save up for 7 years to start your sign shop and buy a nice 64" mimaki printer and 64" summa cutter and the very week you are ready to open for business the state lockdown hits for covid and just like that your new equipment is costing you money and there are no customers to be had......

@alexanderb.9872

4 жыл бұрын

@@redraiderrider3289 hey man, it happens. That's unfortunately life for not just you, but myself as well. I run a small T-shirt operation out of my home as a side business and honestly, the sales haven't been too high but my regulars have referred me and given me side money here and there. Don't give up. Advertise all over IG, FB, local places like Craigslist/offerup/letgo, etc. friends and family. Set up a side shop online for Covid-19 related stuff like play on words or etc. Stickers. Sticker vinyl is cheap! I understand it can be tough especially since you're a shop with a lot of overhead costs but if you're willing to ride the wave, the results will show. I'm grateful I can run it from home for a low overhead cost and hopefully one day, I'll run a shop of my own but until then, I'm adapting, using my knowledge and giving it 110%! I believe in you man, and so does Reyes! You're a whole step closer to getting more! It's a great year to take advantage of many things especially election time! Big money there with play on words! If you're interested in checking me out, my IG is @tzillaofficial I'm a pretty active business and I'm always improving. I support your mission man. Just keep at it! We're all in this together!!! 🙌

I have no plans to start a t-shirt nor a vending machine company but I subscribed to you anyways because dang man you are one motivating guy.

@gracelikerain5039

5 жыл бұрын

same

@TheTruthsupplier

5 жыл бұрын

His positive energy is infectious

@patse4976

5 жыл бұрын

Photogromer i can may help you with my 10 year shirt printing experience. In wich sector you want to get?

@LetsProPlays1

5 жыл бұрын

@Patrick Fellner maybe we can get in touch? I am planning to start my shirt bussines and I am not sure about a couple of things :)

@ronjefe23

5 жыл бұрын

💯

You bought the machine, worked on it, filmed the video, produced it, and above all this a wonderful and distinctive explanation, you deserve all respect and appreciation. A special man and I am really honored to be your friend ❤️🙏❤️

I was about to pay someone to make me some shirts but now I am on amazon buying the equipment lol I'll rather learn the skill and gain the knowledge! thanks Reyes :D

@PolyricalTV

5 жыл бұрын

use Stahls.com or fmexpressions.com

@PolyricalTV

5 жыл бұрын

Ray C. Swornaugh 18 I got a 15x 15 Pressfor 260$

@PolyricalTV

5 жыл бұрын

Ray C. Swornaugh 18 off heatpressnation.com

@jazmineramos8200

5 жыл бұрын

Ray C. Swornaugh 18 I got the us cutter . Good for shirts , decals and I make stencils with it too :)

@inquisitvem6723

5 жыл бұрын

i am wanting to do the same. where do you go to buy blank quality white t-shirts before you start putting designs on them? thanks.

I am 53 years old and I have been working on my business for over 10 years. You are a breath of fresh air young man. Keep it up!😀😀😀

@ReyesTheEntrepreneur

5 жыл бұрын

Thank you

@themusiclab2621

5 жыл бұрын

Is there something we should know about if i want to start doing it ? maybe you want to share some of your experience.

@Greywolfgrafix

5 жыл бұрын

Yes. I've watched his videos for a very long time, and he's been a huge encouragement to me, and I just turned 59.

@lookup2705

5 жыл бұрын

I'm 59 years old. got sick while I was on the job.they cut my long time disability off last year. spend all my 401k now I'll have to start over maybe this will be a good business for me to do at home just to keep my bill paid up

Dude Reyes .. I don't know how I landed here but dam you are such a ball of positive energy with a little swag. This was good bro.

@justinstephens72

5 жыл бұрын

I think he is drunk LOL

@aerofpv2109

5 жыл бұрын

You might have a point lol

@jeffthacker4899

5 жыл бұрын

That's exactly what happened to me! This dude is legit AF!

@Barbees11

5 жыл бұрын

I do like his energy and positivism

@v4t4n

2 жыл бұрын

420th like 😎

I'm a life long entrepreneur and I'm 66 years old. I came on your video looking for a vinyl cutter. You are fantastic at giving information, which is rare, and a lot of up beat energy. You tell it the way it is without a ton of wasted fluff. Great job! I know you will inspire a lot of young entrepreneurs. Hell you inspire me.

Thank you so much I just received all of this for Christmas to start a business and I need help to start. I'm so visual at learning you helped SOOO much. Thank you

My man...I love the fact you posted the issues you had. I ran a silk screen and t-shirt designing biz for years and things didn't always work right (especially printing positives). A lot of trail and error lead to resolve and $. Keep up the videos. Mahalo!

Bro you make me remember why I love being an entrepreneur, I am 44 and semi retired as i did pretty well with a company after 12 years of working my a$$ off and now don't have to work day to day, but this video made me smile so much. Why? The line "You use teflon paper to seperate, but I don't have that, so parchment paper it is" anyone reading this PLEASE learn from this man, what you do not have is sometimes a blessing. I have wasted more money since i "made it" and have more excuses why I can't do things then when I was broke. Use what you have, make the best of it, and love the process. You will never remember the money you make or the crap you buy with it, you WILL remember the passion you had when times were lean. Way to be Reyes, thanks for making my night.

@madvlad7347

5 жыл бұрын

James L thank you. Your words are on point. My grind continues. ✌

@JoeVidal1970

5 жыл бұрын

Great words James. I am hitting 49 and I feel the same way you feel. Did the same with $$ and tried to blame the world for my failures. But now that I was given the opportunity to take charge of my life and begin a family, I look back and remember the trials and errors that made me the man I am today. This kid Reyes is on point. Made me smile a whole lot too!

@H_A_F_GAMING

5 жыл бұрын

James L. Amen

@mobilotto3115

5 жыл бұрын

Thank you.

Over 25 yrs ago I used to work for a sign shop and I'm seriously considering starting a shop from home. After watching your video it encouraged me more to do so. Thx for your entrepreneurial spirit and list of resources. Also I will subscribe to your channel.

Blessings brother. I’ve been in the T-shirt business awhile. Always had people working and doing the footwork thanks to this video I can actually start practicing myself

Bro Reyes I like how you’re straight up man! Not many people show you the struggle, they just show the happy ending at the end but not the ups and downs. Bless up in 2019!

Freakin love this guy. Humble as shit, knowledgable, you're willing to help. Youre a great person bro!

Thank you for taking the time to show the vinyl cutter! i was going to buy the $800 cutter, but now that i see i can get away with the $300 one for cutting car decals, you just saved me a lot of money! You already know, but entrepreneurship takes a lot of time, effort, and drive, and you're exactly the type of person who gets stuff done. i really appreciate everything bro. Keep up the awesome work! Thanks again! 👍 Subbed.

mane, i really love Reyes' positive spirit. That cutter setting situation would have stressed me out!

You are my first motivation of the first day of the year 2019 I have 54 year old and I'm gonna start my own bissnes, thanks to your motivation .

Homie, you explained everything in this video that it took me a month or more to research. I started to lose steam, but you got me pumped, bro! Thanks!

I've been running a contracting business for a while. I like to think of myself a honest contractor. And I like how your honest, takes you a long way. You know the saying, there's a lot of bad people out there. Well, there's exponential amount of good people out there too. Good luck my friend. 👍

I was surfing the internet for a cutter and came across your video. I ordered this machine! Thank you for sharing this! Im new to the T-Shirt world and this video is every helpful and educational for me!! Thanks again!

@KNIGHTMARE_706_ENT

10 ай бұрын

I'm getting in this business as well but I'm so undecided on the cutter so with this Machine can I do car letters and heat press letters for clothes

Very inspirational. I tried the t-shirt business and I know it's a lot of hard work when you do the screen printing. Washing the screens, cleaning, the chemical smell, burning the image...etc. all for just one design. I felt sad on that video when you went to the hospital and your girl left you. Dang! Hopefully you end up making $5-10K A MONTH one day and those that weren't there to support you when you were at your worst...A LA VERGA! Love how you hustle, struggle, and yet always find a way. You got a good personality! Keep at it homie!

@ReallyAsmr

5 жыл бұрын

AnimationMethods he’s def making 5-10k a month now! 👌🏾

@madchillenfoonoobs4243

5 жыл бұрын

invest into a dtg machine..

You popped up in my feed and I said what the hell, I'll give it a watch. Thank you I had a vinyl cutter and used Coreldraw and Illustrator powerful programs. I now dwell in the cnc world and still use those but others as well, keep up the good work

I LOVE THIS. I just came out of a deep deep depression I hid from my job wife and 3 kids. I'm 24 and just decided to try to open a laundro mat and I wish I was around people with your energy!!!! So positive! Your killing it!

@GriffDogActual

2 жыл бұрын

You're never alone bro. Don't hide what you're going through. My dream is a laundromat as well. Crush it ny guy.

I could watch you cooking boiled eggs and watch the WHOLE video with interest!!!!! I can’t remember the last time I watch ANY instruction video all the way through without wanting the person to just hurry up and get it over with and I watch a massive amount of instructional videos on every topic imaginable, Wonderful job !!!!!

Thanks so much man. Not sure if you made this for me but I bought the us cutter about a month ago and have been cutting off the page and wasting so much vinyl. Your the best Reyes keep grinding!

I love your attitude brother, "There's always a way around it." Good thinking!

Up at 2:00 am thinking about how I’m gonna make my own decals for a business I have been thinking about starting for a while now and this vid is awesome Reyes thanks for the advice and guidance

100% I'm going to start within two weeks thank you for giving me hope and God bless you

@marymann6407

4 жыл бұрын

Jusy waiting for mu machines to come so l start cant waitxx

@LionafriQRadio

4 жыл бұрын

How's this going on..? Hope you whipped it guys!

1:10 “I’ma try not to read the instructions because instructions are for chumps!” 2:47 “I read the manual” You killing me Reyes!! lol love your persona.

@ReyesTheEntrepreneur

5 жыл бұрын

I still have a little chump in me

@LibertyGraphicDesigns

5 жыл бұрын

that's called EVOLUTION get with the program guys lol GOOD STUFF

@johanaguirre9805

5 жыл бұрын

lmao

@DavidRiosTV

5 жыл бұрын

I thought the same thing 😂

@rodneyfrost1962

5 жыл бұрын

He stopped being a chump at 2:46

Excellent video Reyes, I have been watching your videos these past few days and you do inspired my to get started already. Just bought my cutter from USCutter and also bought my Heat Press from HPN. Wish me luck...!

@ReyesTheEntrepreneur

5 жыл бұрын

The best of luck :)

@ony4

5 жыл бұрын

Thanks Reyes, in regards to Printer does it matter which one I use? I currently have a color printer now HP Laser Jet 100 color MFP M175nw, can I use this printer? really appreciate your help.

Thank you for this videos i just bought the heat press and vinyl cutter all thanks to Recycling bottles and cans, Took me 2 months to save up but i was able to buy them. Thanks again you motivated me to get my hustle on.!

oh dude you blow my mind, you are so focus and you give some much positive, cool! I also want to start this bussines and thank to you, I will do, thanks man!!

You go Reyes!! I like your enthusiam.. You remind me of me from when i was in high school around my freshman year also. I started selling whatever i can get my hands into. In my Junior i had enough money to start a legitimate small business. I started off selling CDs (Original not boot legged crap). It went good but just like you i had failed relationship. Everything i had gone. I kind of lost myself. My pride. My sense of entrepreneurial enthusiasm. For years i dreaded and hated myself for letting myself go. Im still in the same situation but now im working on starting up a new business next year. God willing. Anyways, i just like to say. You inspired me again. I need to get back in what i love doing and that is hustling on my own. No one to tell how much i can or cannot make. Keep up the good work Reyes.

Just realized I watched this whole video! You kept my attention! I’m a graphic designer skilled in Adobe Illustrator and now I think I want to get into doing shirts! Good stuff bro!

The pause.... On the power-on part When the 2nd cutter came in did it for me! Yeee!

You’re a cool guy 😎 definitely nice to see someone be that sincere making KZread videos. Keep them coming bro.

Reyes mi primo! You sir are one of a kind! Thank you for the info and your vids are awesome! I have two construction companies in Florida and now I'm gonna get these supplies to make company shirts for my employees and myself. Again, thank you pa. Keep it up! 😎👍

@cbrupholstery32

5 жыл бұрын

Mike Rodrigues Subscribe to my channel please 🙏🏼

i admire you so much ! I am just starting my business and I seem to have a hard time getting going. i love your videos and your realness. Thank you for giving us all free advice ! must respect! you're my inspiration dude lol im trying.

@ReyesTheEntrepreneur

5 жыл бұрын

Thank you and don't hesitate to hit me up on social media with any questions you have ok

@heyshandi

5 жыл бұрын

Thanks so much !

@Skeetacus3

5 жыл бұрын

just remember if something is not working for your business try different strategies or a new idea in general also don't get in too deep in a idea that's not working out, but don't give up a big majority of people gain that spark for their business ideas and loose it half way keep sparking flint and you will soon have a fire and then you will be able to expand your horizons.

@rayalbritton9091

5 жыл бұрын

The trails is all part of the learning experience

I have to tell you I been watching your videos and man you help out a lot thank you. I see why companies send you stuff you are the man bro.

I have to say a big thanks to you Reyes. I broke down and bought this Vinyl Cutter and got it yesterday. Hooked it up and had the same issues you had getting it to communicate with my computer. I watched what you did with your settings and it worked. I got my Vinyl Cutter up and going! Thanks for the tech support . . LOL

Thanks for all of your help and advice! I seriously use your information and it has helped me grow!

I started out with a $300 cutter. My second job was an entire warehouse complex of 34 metal signs. $6000.00 job $4000. profit.

@bryanotero123

5 жыл бұрын

You are soo boss

@ParanormalResponse

5 жыл бұрын

@@bryanotero123 I don't know if that was sarcastic. But I wasn't trying to sound like a smart ass. I just got very lucky it was my second job and nothing like that has ever happened to me again on that large of a scale . but what I'm saying is that it helped me to purchase all of my equipment that I needed to start up screen printing without having to take out a loan or use a credit card.. So 5 years later I'm now doing DTG printing and Screen Printing along with signs. There's money to be made.

@littlebrittle18

5 жыл бұрын

Paranormal Response keep doing your thing man! You had an amazing start, and it’s something you’ll always appreciate!

@bryanotero123

5 жыл бұрын

@@ParanormalResponse No it was not sarcastic, i meant thats SOO BOSS!

@dnicole4236

5 жыл бұрын

Paranormal Response Are you able to make a living off of your business alone?

Your vibe is inspiring. I started making vinyls and I’m addicted to it. I wake up eat and sleep vinyl.

Bro, I'm starting my own business and you straight up help motivate me to push to start work faster! Thx bruh! ....... keep pushing

It is nice to see young people starting businesses.

I just started following you recently bro I love your mind keep doing your thing

Great video. I had an airbrush & screen printing shop years ago, amazing how different it's become in the last 30 years. Getting ready to finally retire from Fire & EMS and going to get back to shirts again... Thanks for the video!!

thank you. you really help me out if i had teachers like you i would aced every class ive been so scared to do anything an ive had this for over a year

Man you motivated me so much ! You explain everything perfectly brotha 🙏🏼💯 Your good at what you do ( everything ).

Dang son, you covered it all! Great job!

Thanks for making this video. My friend just lend me his old cutter for me to try and use it. I was having hard time on having it detected. When I saw this video and followed how you made it detected, it was really helpful. Thanks again

Thanks buddy. I am fresh to heat pressing. I just purchased my heat press machine. Next week I will invest in this cutter. Thank you for your information. You make it easy for people like me to start. Love your youtube channel.

Damn bro, you kill me. This is some of the best stuff I’ve seen lol 😂 had me rollin. “I’ve even tried the old Nintendo trick” 😂😂😂

DUUUUDE, YOU'RE AAALLLLSSSOME BRO!lol, I laughed every time you came with something like that. Keep up the good work VAAATO!

Thanks Reyes! I just bought my first heat press and plotter kit :) This video is by far the best one for beginners, it should be included in every kit! :D

Reyes I just stumbled upon you. Love this video man! You seem like an honest awesome guy!

Just started my garment printing business called "It's Gone Vinyl" using a vinyl cutter, slow start but I'm optimistic haha Great video bro, I'll be subscribing 👌🏼

Reyes you are the best! Im from australia and i think this may be a big help for a side income. Keep up the good work dude your such an awesome guy to watch

I left my job that I had for almost 8 years. I'm a student and I no longer have a permanent income. A had lots of interviews and they all want my experience, but refuse to pay me right. I started looking into this because I have a million ideas in my head on how, and what to do with a business like this! Thank you Reyes, I know it will be a lot of work but If i put the same effort I did with my job, then I know I can make some art and really good money! Thanks again!!!

You have a new subscriber in me. You answered all the questions I had in my head and confirmed that I was doing my shirt business the right way the whole time. Thanks Reyes!!! Very Motivating, Inspirational, and entertaining!

got to love that free 99 knowledge

I love this video; the positivity, even down to contacting customer support. I can tell your a fun dad too (saw the writing on the wall!lol) Thanks for the inspiration

You have such great energy and positivity in your personality! Don't change a thing and stay a REBEL baby! Cheers

“I read the manual... I changed the outlets ... *I Even Gave It A Little Kiss* “

@rudder7488

3 жыл бұрын

Dude that had me rolling 😅

its hard not to like you, keep up the good work Reyes

This was my bread and butter for years, then I became a dad. Back at it now that my girl is a little older. Love this!

I haven’t subscribed to anyone in ages, your energy is amazing

You're so entertaining to watch. Love the energy!

@mathieulacas188

3 жыл бұрын

Haha he's amazing, I could've watched him more. The guy seems so damn chill 😄

@DirtyFan2

3 жыл бұрын

Go give him a kiss

@205deenice8

3 жыл бұрын

Right

This was helpful af. You're good af bro thanks for your help ! 🤘🏼

I never met this dude in real life and just came across his videos today. But he seems like one of those guys you would always be cool with😎. The vibe he gives off is cool, and I learned something new today. I'm pretty sure you have tons of experience in doing what you do which makes you even more cooler because you are sharing your knowledge. People like you brother here will always be blessed in life. Crazy part of it all is I wasn't even searching for this content. God puts people together for a reason.

Great Vid! I started the same way but only using a 10" cutter. I was homeless and lucky enough to couch surf (at the time), and saved up for the small cutter and sold decals at an artesian well, where I live and where a large population of the state community goes to get clean, cold, underground spring water. eventually I was able to pay a bit of rent to someone to stay there. I saved for the medium cutter. I think it is the 28" or 32" cutter. I not only did decals and shirts (SAVED FOR A HEAT-PRESS BUT STARTED BY USING AN IRON!), but also ENTIRE vehicle designs and themes! One of the cars I did, ended up in a Seahawks fan parade and the owner was invited to Seahawk home game events at Hawk's Alley which is where super-fans and player families hang out to tailgate. I also use US Cutter. Now I am delving into airbrushing and experimenting with ways to combine them. Such as: I go to a lot of fairs, carnivals, parades, biker rallies etc etc etc. (basically any city event i can), and now that I have an awning, I pay the rent fee to set up my 10'x10' space at these events (usually $100-$150 a weekend, but I used to set up a carrying case and a small sign on a sidedwalk nearest the event and basically pan-handle it) and sell pre-made t-shirts and decals while doing face-painting (which there is almost always a line for and I can Use my Cutter to make my own Mylar fcae-painting stencils for fast and efficient profit). If I can get off the streets as a homeless man by doing this anyone can make a profit! So awesome you shared your journey! I wish I could have as well!

I love your videos...you motivate me all the time!

I still remember the very first time I tried setting up my graphtec cutter, it took me 2 days to cut my first design, I sent pics to my whole family 😂 because I was so excited. 3 years later and I'm getting ready to get my 3rd graphtec the 48 inch to be exact. Getting into this tipe of business has been the best desicion. Good luck to all of you!

@tyreecelooney5679

5 жыл бұрын

I’m new at this, looking for so good advice. I’m looking a 53 inch vinyl cutter machine on amazon. Will I be able to make shirts and decals for cars.

@saulevaristo1674

5 жыл бұрын

@@tyreecelooney5679 you should be able to. I think getting a bigger cutter is a smart choice, the 1st cutter I got was a 15 inch, if I could go back in time I would get a bigger one instead. I love making car decals since is more profitable and decal vinyl is way cheaper. Good luck to you!!

@saulevaristo1674

5 жыл бұрын

@@tyreecelooney5679 I get my materials and equipment from uscutter.com

@tyreecelooney5679

5 жыл бұрын

Saul Evaristo thanks a lot I’m on there site now.

@amvautotint5603

3 жыл бұрын

Saul Evaristo Can i use this to cut window tint?

Been researching for my business and found a heat press I’m going to buy and it’s the one in your video! It must be the one.

Man love the energy and the hustle. Advice to the young ones watching this, listen to this man. If you’re starting a business everything that can go wrong, will. And that’s ok, it’s not a failure on your part it’s one more thing to learn from.

Great Stuff and Great Attitude Reyes!

"the old super nintendo trick!" damn! my stomach hurts!

@JoeVidal1970

5 жыл бұрын

I was like, wait, he's too young to even know that trick! Lmao!

@chrisbushell3714

4 жыл бұрын

he forgot to put it in and give it a smack though... thats why it didnt work lol

@amo3244

4 жыл бұрын

Yes, that was very funny!!

awwwww snap!! Finally got my vinyl cutter!! I want to send you something for taking the time out to do this video!! You are appreciated!!

Came here to learn how to make stickers for the snowboard brand I’m building, subbing straight off the energy presented in this video. Much love Reyes

love the tips!!

Awesome bro!👍 Love to see you always expanding. 💡

Wow I can't believe how helpful you are, you have nothing but good fortune and good karma.coming your way bro. Your a special dude that's for sure

This is going to be the first time attempting this nd ifeel confident after watching alot of your vids the explanations visuals nd examples really really gave me the confidence that one day ican perfect this skill and take it as far as ican and for that i thank yu bro

You can use contact paper from Dollar Tree instead of transfer paper.

"It's not my doll from Japan..." 🤣😂🤣😂

@samyoung6380

4 жыл бұрын

ha

100percent a positive vibe. thanks for all the tips man. You make me wanna crack a beer with you and i dont even drink thats how awesome you are. Keep that great vibe.

one of the best youtube videos I think I've ever seen.. about anything! I want to go into business with you - your energy is fire

“I even gave it a kiss” 😆😂

Update : I purchased this machine over 6 months ago and it’s been a treasure 🙌🏼 You will need patience to learn the program and it’s definitely a trail and error process .

@jayvalentino384

4 жыл бұрын

** 7 months ago

@ginod2279

4 жыл бұрын

What model roland is this please? I want to start up and my old boss used to have a roland so know thyre good

@karenquintino1533

4 жыл бұрын

What kind of stuff can you do with this machine? I'm thinking of purchasing one if you could help it would be great! Thanks.

It was really nice of you to share all of these information with us. a lot of people will benefit from them and I am one. Thank you.

Dude... 2:37 The Super Nintendo trick... 🤣🤣🤣🤣🤣

Vinyl Systems Specialist 28" Cutter/Plotter - Stepper Motor now $400 Do you still like it for the $? Thanks for what you do!

@Reyes The Entrepreneur Thank you, I think you have just given me my second business to start up thanks bro, much love from the UK.

Bro, really love you vids, you inspire like a good Father with empathy and a dose of reality! Can't wait to share with you my journey, starting with vinyl cutter to make stickers and when i have more $$ I'll get the heat press and so on aiming for inkjet set up eventually!

Nice set-up. Most of the work is for finding customers. Good luck !

I have to admit, I thought you were annoying as hell! Hahaha! But as I watched video after video, I changed my tune. Dude, u have MAD skillz. U know ur stuff. U have INSPIRED me to make this journey into the tshirt biz-niz. U alright, Reyes! I dig ur straight up, no nonsense way of approaching ur task at hand. Keep up the FABulous work!

I love your energy can’t believe I’m just finding this channel

I appreciate this video of yours... Imma save now and do decals business... Thank you so much for doing this video... 💜

Reyes.... been doing shirts for myself... I don’t do social media or anything like that, KZread is the only media I do but anyways what I was trying to get at is that I been pressing my basketball shorts and work out shorts as well... people love it and the yoga pants too for some girls ... just thought I’d give u a thought on trying to expand your stuff! 🙌🏾 I love your attitude and goofiness lol... we could be good compás working together or cracking jokes Also I like your RE logo , how about you integrate a T in between them! Another idea , I do a lot of htv and have a lot of scraps... trust me they come in handy! .... I’m not sure if you or other people have tried this but everytime I cut a big design I keep the clear sticky film on the side. Reason is when I have an odd shape scrap or a small 3” piece the cutter won’t work BUTTTT if you grab the big pieces of clear sticky films and make an extension then u can use that ! You just have to put a sticky film on top and on bottom so it doesn’t stick to the wheel. If you don’t understand what I’m saying I could possibly make a video.

@5799015

5 жыл бұрын

Hey Cruz, where do you get your yoga pants?

@Factory928AC

5 жыл бұрын

5799015 blanks from Walmart, rue 21 sometimes Ebay and Amazon, 85% of the time the girls already have there pants and bring them to me . I get a lot of girls who want simple things on the gymshark blanks and normally just charge less when clothing is already bought.

@5799015

5 жыл бұрын

@@Factory928AC thanks...keep grinding

@Factory928AC

5 жыл бұрын

5799015 thanks! Also to whoever reads this.... I also do a lot of motocross jerseys and some want the decals really close to the shoulders and if your been pressing for a while then you should know that the neck raise won’t allow the press to fully press the surrounding area due to its rise. I normally use an iron to press that design and it works just fine as long as your familiar with the texture of knowing when the htv has grabbed correct. Another tip since I speak of motorcross, race style t shirts I been making they ask for the sponsors to be on one side of the shirt and usually 17-19” up and down and my press is only a 15x15, the method I’ve been using is iron everything on first then press after and they come out looking good. One last thing..... the hardest shirt material I’ve ever had a problem pressing is the wife beater style material... anyone have good luck or tips on this?

@Factory928AC

5 жыл бұрын

Let Go I personally do not. I do not know how to edit videos nor have I tried lol