Addendum: Of course, all said here applies also for Cat6 or Cat7 Ethernet cables. It might be even better to use those cables if you do permanent cabling in your house because they will also work with faster Ethernet standards. I used the term "patch cable" misleading. I should have said: Crossover patch cables. And finally: There is nothing like "Power over Internet". Maybe it was a Freudian slip?

@AndreaBorgia

5 жыл бұрын

Ahahahah, I thought I had misheard you :P Anyhow, there is a standard for that too: www.faqs.org/rfcs/rfc3251.html

@Andology

5 жыл бұрын

Andreas Spiess beautifully presented 😎 (as usual) 💙 thank you!

@benhetland576

5 жыл бұрын

I guess some will claim that Google has power over Internet :-)

@Andology

5 жыл бұрын

Ben Hetland 😂 good one! Lol

@mikelopez9893

5 жыл бұрын

Andrea Borgia Dated April 1st ... 😉

Your channel is pure gold! Thank you for making these topics far easier to everyone. Greetings from Mexico!

@AndreasSpiess

2 жыл бұрын

Thank you for your nice words.

Nice walkthrough as always Fantastic work Andreas! Thanks for sharing👍😀

@AndreasSpiess

5 жыл бұрын

Thank you! I was also interested in how it works.

Hello Andreas - excellent presentation, concise, informative, and very useful. I am getting started in POE and now know what's going on so I can select my equipment with confidence. Thanks for the great work, and keep it up!

@AndreasSpiess

4 жыл бұрын

You are welcome!

Great video mate! I learned a lot of new things about PoE. You just earned yourself a new subscriber! Cheers from SoCal :)

@AndreasSpiess

4 жыл бұрын

Welcome aboard the channel!

Getting the old cabling exchanged for cat 6 was the best upgrade to my house. Like your videos very much keep up the good work. Regards from Murten

@AndreasSpiess

5 жыл бұрын

Thank you for sharing your experience!

Great informative video... I like your content that isn't always how to make something, but related topics like POE. A year ago I was trying to create a device charger using POE but it was coming from a high end Meraki switch. Now I understand why it didn't want to work! Thanks!

@AndreasSpiess

5 жыл бұрын

You are welcome!

Superb tutorial. My favourite Andreas S video yet. Spot on fella. Ian, Birmingham, UK

@AndreasSpiess

5 жыл бұрын

Thank you! Glad to read that.

This was very helpful for me! I don't have devices that use PoE, but I want to route ethernet cables to all the rooms in my house. I considered buying PoE hardware, but I didn't know how I should do it (if at all). The routers and switches seemed too expensive for me, and there were several factors to consider: active, passive, power capacity, using injectors (instead of PoE router), etc. Your video made an order in all that. Now I know how PoE works, what modes there are, what are the hardware options, and how to make it all work together. Now I can make a more educated decision and plan better. Thank you.

@AndreasSpiess

3 жыл бұрын

Glad the video was helpful!

Fantastic work as per, love the dry wit.

@AndreasSpiess

5 жыл бұрын

Thank you!

Another useful and informative video. Thank you Professor Spiess.

@AndreasSpiess

5 жыл бұрын

You are welcome!

As always, this is a very informative video :) Easy to understand for people who do not know anything about Ethernet, and not too slow for people who do :) I already knew how Ethernet works and I cannot remember how many Ethernet plugs I crimped, but I did not know how PoE works. I plan to install some PoE enabled cameras around the house, but now I know that I cannot just plug in a PoE injector somewhere without potentially breaking some existing devices. Well, that is good to know! Thanks for this video!

@AndreasSpiess

5 жыл бұрын

I agree: It is always good to know a little more than the bare minimum, especially for troubleshooting.

I would definitely deploy at least Cat6. There are also 'smarter' splitters available that use the full standards and the output voltage can be selected (5v,9v,12v). TPlink do one but it is rather expensive but works well. POE has been my preferred method of getting power to devices for some years now.

@AndreasSpiess

5 жыл бұрын

Thank you for the tips.

@wiel-spin

5 жыл бұрын

The TPlink one is not isolated which can cause interference. I bought one from aliexpress to power a Philips Hue hub.

@cannesahs

5 жыл бұрын

at least cat 6A

@Josh.1234

2 жыл бұрын

You guys ever run a dumb device like a 12 or 24v window shade DC motor? Prewiring my house and cat6 would be easier/cheaper than running other wire so trying to figure out how to make it work

@bryngerard4334

2 жыл бұрын

@@Josh.1234 It's a matter of the watts required as to whether or not you will be successful in running any device. Since this post there has been an upgrade to POE delivering more than the 15w in the original spec. There are also hybrid versions that will deliver higher wattage but at the expense of data. I am also aware that a whole host of new Ethernet standards have been released that are for industrial use in large facilities with many machines doing the same thing with 10Mbs throughput and higher wattage over POE. and also providing higher bandwidth over Cat5 for other uses. The world is full of skyscrapers full of Cat5. No one wants to pay for the upgrade. Even the cable infrastructure needs upgrading because of the increase in weight and size of the cables. So no one wants to do it. They are claiming 1.5Gbs over Cat5e and that is good enough for the girls most guys go out with ;) I don't have a link for all of this but go to IEEE's website and have a rummage. I think that you will not go wrong by installing Cat6 but higher the better.

Крайне полезное , интересное и полезное видео на тему РоЕ питания ... ! Огромное спасибо автору за весьма огромный труд и огромная благодарность за то те кто его смотрит могут намного больше времени потратить на нечто иное , чем пытаться найти информацию по теме ... !

Thank you for the excellent and most informative overview!

@AndreasSpiess

5 жыл бұрын

You are welcome!

This reminded me when I worked for a company that relied on telephone lines for data (regular old POTS and ISDN) we used to joke anytime we had problems we should use an RJ11 to 110v adapter (telephone to electrical socket). Fortunately back then, the phone companies were quite helpful and put customer service on top. It helped that we spent 10's of thousands of dollars every month on line installations and phone service every month. We also used, similar to PoE, power over Cat 4 to our remote data terminals that communicated over POTs (regular phone) lines.

@AndreasSpiess

5 жыл бұрын

Interesting how old some of the ideas are...

Ich dachte immer ich weiß schon alles über POE. Danke für ein wie immer tolles Video. Alles auf den Punkt gebracht. Mach weiter so. Einer meiner Top10 Kanäle :)

@AndreasSpiess

4 жыл бұрын

Vielen Dank für deine netten Worte!

Super interesting & useful . I had forgotten what Ethernet cables look like having switched over to mostly wireless, but for external cameras that can be unreliable, but the need to provide signal & power has always mitigated against cable. However, with Poe as you show it is a potential way to get a more reliable device without the need for power cable as well. Might think of trying it. Thanks for sharing!

@AndreasSpiess

5 жыл бұрын

You are welcome. I still have most of the devices in my lab hooked up to Ethernet. I feel it is more stable and faster.

Thanks Andreas very informative. Finally you cleared the cloud on PoE.

@AndreasSpiess

4 жыл бұрын

You are welcome!

I knew the initial info but learnt a lot a bit later on. Never spent the time to research so thanks for filling that gap.

@AndreasSpiess

5 жыл бұрын

I also had it on my list for quite a while...

Best summary I know, merci vielmal!

@AndreasSpiess

5 жыл бұрын

You are welcome!

Another excellent video Andreas! Thank you!

@AndreasSpiess

5 жыл бұрын

You are welcome!

Very interesting and helpful video Andreas. As I have to mess with PoE at work in a few days I now know what I do 😀

@AndreasSpiess

5 жыл бұрын

So I hope I did not tell you wrong things ;-) Good luck!

I had an old trick I used for crossover cables going back years. I would take a sharpie and colour in the sides of the crossover cables. Black, red, blue, didn't matter. If the ends were coloured on the sides, it was a crossover cable. I've still got a couple floating around and it has held up really well. That said, I'm really happy that unless you are playing with some really old switches (or hubs) it hasn't been needed in a long time.

@AndreasSpiess

2 жыл бұрын

Good Concept. Marking things Ortern is simple and can save a lot of time.

I am impressed that you use Mikrotik. Here in the US I have over a hundred deployed in the field and most tech's have never heard of them. I've been using for almost 20 years. I know they are much bigger in Europe.

@AndreasSpiess

5 жыл бұрын

One of my viewers suggested me to buy them and he even helped me to set it up. So far it works flawlessly.

Thank you for a very informative view of how this all works. I'd never had occasion to need to look into the details of how the handshake works and how the different schemes are mostly compatible with each other. If you ever decide to revisit this topic, it would be interesting to compare some of the passive PoE injectors / extractors by looking at the impairments due to the transformers they are using. Are some of these better quality than others; especially over long distances where signal integrity becomes more important.

@AndreasSpiess

5 жыл бұрын

For the moment I do not plan a next video about the topic. It would be too special, I think.

Thanks for the video! I always get a bit confused by PoE. But good to know a PD needs to be able to handle mode A and B. 19:25 I would also definitely wire a new house. But I would indeed make it CAT 6 just to be a little bit more future proof.

@AndreasSpiess

5 жыл бұрын

You are right with Cat6/7

Great just the video I was looking for. I'm struggling with my CCTV setup trying to push a CCTV 12v supply over my copper Cat5e cables. I'd never thought of the voltage drop prior and was getting poor output from the cameras. I assume that even though I've used 3 cables for positive and 3 for negative (2 for the actual camera data) that I'm still having too much resistance over the run and the drop is too much. I will have to get a multi-meter and test. Thanks.

@AndreasSpiess

5 жыл бұрын

The multimeter is a good idea. Maybe the cameras draw quite some current, especially if they use LED illumination.

Great Video, thanks. Have you any suggestion about cases fitting for a pi with the poe hat?

@AndreasSpiess

5 жыл бұрын

So far I do not have one in a case

There is a relatively cheap Netgear 5 port switch which is PD *and* PSE, powering two of its ports (the other two are data only). It was an easy way to extend the number of ports from one to four, when I couldn't easily pull multiple cables. (Netgear GS105PE - 5-Port Gigabit ProSAFE Plus Switch with PoE Pass Through)

@AndreasSpiess

3 жыл бұрын

Sounds like an interesting problem solver for situations you describe. Thanks for the info.

Nice explanation. Thank you!

@AndreasSpiess

Жыл бұрын

You are welcome!

A Side is used for Residential and B Side for UL. Take it from a Professional Home AV Integrator and if you're having a Home built or renovated I would invest in Cat6A cable. Plain old Cat6 has the same specs for Cat5e except less cross talk and uses a thicker wire gauge. Cat7 is Cat5e but Shielded. Cat6A can handle up to 10Gbps. Since Category Cable is so versatile you can use it for HDMI Video/Audio Transmission, Analog CCTV, IP CCTV, Home Automation, Security Systems, even Central Vac Systems. However I wouldn't waste my money on Cat6A Security (unless you're using a smart Keypad) and Central Vac. While I am here go with this tid-bit. Never put all of your cable drops into one of those dorky Structured Panels, no matter what size panel you use in the end you'll wish it was bigger and put the Cable drops in a ventilated Closet that has Attic access above. If you can't put it in a area that has Attic access then have a conduit ran from that point to the Attic.

@AndreasSpiess

5 жыл бұрын

Thank you for sharing your experience! Very valuable.

Swiss watches and clocks - high precision and accurately made. Some shafts have jewel bearings Swiss chocolate - rich flavour and addictive. Well packed but easy to open Swiss Red Cross - known round the world for their work. Very reliable The guy with the Swiss accent - all of the above. He also has a great Germans dry sense of humour. Thanks for all your great videos.

@AndreasSpiess

5 жыл бұрын

You are welcome and thank you for your nice words. Just one small correction: You probably mean the International Committee of the Red Cross located in Geneva. I worked for them when I was young as a radio operator ;-) There is a local (not so famous) Swiss Red Cross.

I experienced problems with TIA-A wiring, when used for media-converters (e.g. HDMI over CAT converters). Also when the house wiring is mainly A or B and you patch on the patch panel from one to the other, I experienced instabilities on the link sometimes.

@AndreasSpiess

5 жыл бұрын

Thank you for sharing your experience!

very instructive. thanks

@AndreasSpiess

5 жыл бұрын

You are welcome!

Great video, thanks.

@AndreasSpiess

Жыл бұрын

:-)

Very well presented.

@AndreasSpiess

5 жыл бұрын

Thank you!

Cool article, thank you. Cat 6 and Cat 7 are seldom associated with pure copper cable instead of CCA (copper-clad aluminium) and a bigger section conductors (lower AWG number). These characterists surely lead to lower resistance but it is not clear to me how they influence PoE, especially in the 12V mode B based version. Not having found any strong quantitative advantage myself, I cabled the whole house with cat5, with substantial saving, someone have a different point?

@AndreasSpiess

5 жыл бұрын

You find many comments concerning the usage of Cat5, 6, or 7

Thanks for your sharing the usefull information.

@AndreasSpiess

4 жыл бұрын

You are welcome!

Gigabit Ethernet requires CAT-5E or better. Many prefer CAT-6, though the velocity of propogation is, I believer, slower than CAT-5E. I don't know about customs in the EU, but in the US almost all pinouts are done in accordance with the T568B standard.

@AndreasSpiess

5 жыл бұрын

I pinned a comment to the top where I recommend to use better cables, especially in homes. Another viewer also suggested that the -B standard is used more often.

Greate video, could you either point me to or create a video on powering devices in general and how buck converters work with some examples, aimed at the beginner end as i am just getting into the maker space

@AndreasSpiess

4 жыл бұрын

Maybe you google. I usually do not watch beginners videos. So I am not a big help here.

I really learnt alot thanks

@AndreasSpiess

Жыл бұрын

Glad to hear that!

Greate video,do you have video about 5v5 router setting or reflashed in a use for specific use

@AndreasSpiess

Жыл бұрын

No, I do not have router videos.

Superb, thanks

@AndreasSpiess

5 жыл бұрын

You are welcome!

Super. Thats what I need to know.

@AndreasSpiess

5 жыл бұрын

Thank you!

Yes, love power over Ethernet. Almost got my first thousand subscribers in my channel.

@AndreasSpiess

5 жыл бұрын

Congratulations!

Excellent!

@AndreasSpiess

5 жыл бұрын

Thank you!

I've bought 20 PoE splitters from TP-Link (TL-POE10R) to power my IP camera's but now that i've upgraded them to cameras that support PoE natively, i can reuse these fairly cheap ( I've burnt too many switch and CPE ports to use "passive" PoE.

@AndreasSpiess

5 жыл бұрын

Thank you for the hint with the TP-link splitters.

The b standard was made to be compatible with existing wiring for phones and the such in the USA. It was for ATT stuff. Also I agree with him saying install at LEAST Cat 5e since you can do 5Gig over it probably without any issues. Its future proof, even as others may not like that its not exactly up to snuff. True, that Cat6a is probably cheap enough now but homes in the USA are still being built with daisy-chained CAT3 so home-run CAT5e is a huge step up. I'd suggest putting one per wall, per room except maybe bathrooms. Also run it to doors and windows if you're feeling spunky since sensors can run over it too.

@AndreasSpiess

3 жыл бұрын

Thank you for sharing your experience!

thank you

@AndreasSpiess

5 жыл бұрын

You are welcome!

Thanks

@AndreasSpiess

10 ай бұрын

You are welcome!

I have a box of cat5 and cat6 laying around very handy.

@AndreasSpiess

5 жыл бұрын

:-)

Hi Andreas! Another great video! Congratulations! 0.2 ohms per meter would be 4 ohms for 10 meters because you'd have 10x0.2= 2 ohms in the + wire in series with another 2 ohms in the GND wire. No?

@AndreasSpiess

5 жыл бұрын

Yes. But in Ethernet cable definition they already account for that (at least this is what I understood)

Hi Andreas, I like your videos and they are also very informative like this one too. In this one you started to talk about differential mode, all de features of such a signal were correct but the explanation on differential signals I have some remark. (or maybe I did not understand the explanation) But to my understanding differential signals (mode) means that there are two wires and on those two wires are two signals, a positive signal and a negative signal where the negative signal is the inverted of the positive signal. This makes it better for long distances immuun to interference etc. Best regards Gert-Jan

@AndreasSpiess

5 жыл бұрын

I thought that, if you have two wires, you always can measure the voltage difference between them. If the difference is positive you can interpret it as a 1 and if it is negative as a 0. Like that, common mode signals are not measured as they do not influence the difference. But maybe I am wrong.

@gert-janvanschaik8151

5 жыл бұрын

Hi Andreas, you are completly right, i missed that you meant that the signal was showing the differential voltage of the two signals. Best regards Gert-Jan

@AndreasSpiess

5 жыл бұрын

Maybe I should have mentioned it better. You were not tho only asking about it.

Very interesting video. I guess it's time to learn more about PoE. One thing that kind of surprised me is the 50V high voltage. For underwater use, 30V is considered the safe limit. It has to do with how much voltage can be there before someone can't let go. As an aside, the 30 Volt limit was well tested on divers, but the divers were all men, and when they got around to testing on women, they found that women have a lower maximum safe voltage...

@AndreasSpiess

5 жыл бұрын

I do not know where the 50 volts are coming from. Was also quite high for me...

@tin2001

5 жыл бұрын

48v is 4x12v batteries in series... This was used as a cheap power backup and stabilising method for phone exchanges. Since telcos were early adopters of more complex network equipment, it often also was designed to fit that existing 48v practice that was common in their exchanges. Network and phone equipment slowly moved into business and home use aswell, but that 48v was already predetermined many decades ago. A lot of passive POE also used 12v, 24v and 32v, but 802.11af defines 48 so 48v supplied switches can push the same voltage out the port.

@ats89117

5 жыл бұрын

That all sounds reasonable. I just don't think today's equipment or regulations are where they need to be for commonplace medium power transfers over Ethernet, but I'm sure things will evolve pretty quickly if PoE catches on.

@AndreasSpiess

5 жыл бұрын

@tin2001: Thank you for your explanation!

Great video, very informative and useful information. I've been looking at PoE switches and found the price to be the limiting factor in my adoption now. I had the house wired in CAT 5e when I built it 20 years ago but I recently switched to using CAT 6 for new installations after my spool of CAT 5e ran out, cost wasn't too much more, just avoid cables that aren't pure copper. After watching this video, I think I'll get a small PoE switch for powering my Raspberry Pi and VoIP phones just to get some experience with it. Thanks for the information.

@AndreasSpiess

5 жыл бұрын

The PoE switches are no more as expensive as in the past, especially the simple ones.

If you bend the cables too far, the points of the ones get stuck in the bend.

At least my Mikrotik supports passive PoE too. But you have to enable it on a per port basis

@AndreasSpiess

5 жыл бұрын

I did not check. But you are the second viewer mentioning it. For the moment I do not need it because the Pi Hat seems to be able to "shake hands"...

In meeting room, PoE are used for everything; HDMI input/output devices, microphones, amplifiers, USB interface, room controller, touch panel

@AndreasSpiess

2 жыл бұрын

If you have a cable approach this is a very good thing. Today I see more and more things moving to WiFi which complicates things a little...

Andreas, thank you for this very digestible and thorough explanation of how PoE works. I have a question for you. I’m troubleshooting some intermittent issues that I think may be power related with a hardware design. We have a few things going on with it that are nontrivial and I’m looking to find the root cause in order to make the design more robust for the next revision. I am hoping to find many insights by poking around using a scope in different places including on the cable. You have shown doing exactly this, even including the PoE handshakes, which is very promising to me. I have already created a purpose-built Ethernet cable on which I have spliced shunt resistors that I carefully assembled as small parallel resistor networks to a uniform value of 0.595 ohms on 4 of the wires. Based the amount of research I had done up to the point of performing this surgery, I ended up splicing the orange and blue wire pairs. This particular Cat5 cable has been wired in T568B mode, meaning that I have added shunts to pins 1, 2, 4, and 5. I’m still fuzzy on this but these seem to be the plus (+) pins that “carry current in”. My question is specific to the issue of how might I use my 4-channel scope to produce an output that sums the total voltage drop seen across all 4 resistors. I am concerned that the ground on all 4 probes will be continuous but the voltages found on the PoE cable are probably floating and I am concerned about frying stuff. I posted on Reddit and someone mentioned that I ought to be able to use 4 channels and set up a difference calculation to measure two of these shunt voltages. Do you have any tips? I suspect once I poke around in there, things will become more clear. I could also easily re-crimp the ends of the cable to turn it into a cable that has shunts on pins 3, 6, 7, 8. My hope is that potentially all of the PSE-side of pins 3,6,7,8 on the cable would be something I could safely connect my scope ground to!

@AndreasSpiess

2 жыл бұрын

The ground on all probes are connected. So you easily can create a short. If you want to measure not ground referenced voltages you need two probes and subtract the voltages by the built in math function.

@stevenlu7324

2 жыл бұрын

@@AndreasSpiess makes sense to me. It seems safe to poke around with any number of probes provided I don’t connect any non ground stuff to any of the ground leads. Do you know if any portion of the PoE wires are going to have a shared node? Maybe the PSE side of the minus (3,6,7,8) wires? So then I can maybe put my shunts on those wires, the scope ground will be on the PSE side of those wires, and then i can make accurate measurements of the current on all 4 of those wires with only 4 channels.

@stevenlu7324

2 жыл бұрын

Ok but i think i read somewhere that PoE’s power delivery is also isolated, so even the lowest potential node on the PoE lines, even if it is shared by those 4 (for 803.2bt so we have all wires used for power delivery), would still be isolated from ground. That would mean that since the scope ground is earth grounded and the switch is also, it still would be really bad for me to connect the scope ground to this PSE side of the PoE minus-wires. I shall poke at it with a bare probe and see what the voltage reading is! Was hoping it could be 0, but if the supply is isolated it might be all over the place.

@Andreas Does adding a common mode choke, in series, on each of the four differential pair in a gigabit PoE ( i.e. 4 chokes on 4 pairs) inside the RJ45 cable going to kill the PoE .

@AndreasSpiess

6 ай бұрын

POE is DC. So a choke should not affect it.

Hello! Can you do a video for SPE (Single Pair Ethernet) I am thinking about it as my main communication interface for my components that travel med-long distance. However I still need to understand if these can work with things like UDP/TCP or if it uses directly the PHY layer. It would be great to see a video about that!

@AndreasSpiess

Жыл бұрын

This technology is too special for a mainstream channel like this one :-( But they should work as normal TCP/IP cables.

@kikolbo

Жыл бұрын

@@AndreasSpiess thank you for your answer. I think they hold great future for IOT applications. Sparkfun sells some good intro kids. Awesome channel! Thank you for the content.

Is there anyway to split POE and provide power and internet over micro USB to a Raspberry Pi Zero? I know you can buy POE splitters and then use something like a Chromecast adapter but I'm looking for a single adapter solution. Belkin makes a version for Ipads, but there should be a Raspberry Pi version

@PerMejdal

5 жыл бұрын

Search ebay for "active poe raspberry"

@Farmboy1927

5 жыл бұрын

Per Mejdal Rasmussen that won’t work for a pi zero though

@AndreasSpiess

5 жыл бұрын

Maybe something like that? s.click.aliexpress.com/e/bK465sLm

Thanks so much! How can I feed a rapspberry pi zero W using only ethernet port of a router? I don't want to use another 5v charger and

@AndreasSpiess

3 жыл бұрын

To connect a Pi Zero do an Ethernet cable you need a USB to Ethernet converster.

@acdcjavier22

3 жыл бұрын

@@AndreasSpiess thanks! Do you have any reference of any USB to ethernet converter that you can recommend to me?

14:03 The transformer center taps are shorted together ?

@AndreasSpiess

5 жыл бұрын

No. Just in the drawing. They go to the 4 pins

Thank you very much. However, i'd like to disagree with you recommendation of Cat.5 wiring for new / re-modeled buildings. Especially in new buildings, the cost of high-grade 10gig+ capable Cat.6 (or higher) wiring is almost negligible. You'll probably never need Cat.6+ in the kitchen / bathroom / outdoor house corners (surveillance cameras). But it doesn't hurt to have 10gig+ capable wiring in most of the rooms, especially at least 1 line each to the utility closet / attic / garage / basement - that's where one would put potentially noisy home servers / infrastructure gear. Maybe 2 10gig+ lines between storeys.

@AndreasSpiess

4 жыл бұрын

Of course you can go to better cabling. Prices seem to come don for those.

Can you use PoE on a RPi 4B without a HAT? I have a project with a 12VDC source and I need as many GPIO pins as I can retain, due to multiple HATs being employed. As it sits, I already have a couple of pin conflicts to sort out. I don't want to rely on the USB-C for power due to space requirements in that side of the board, my available space is on either end.

@AndreasSpiess

5 жыл бұрын

Maybe this could be a solution? www.aliexpress.com/item/32973169095.html (Not tested by me)

Hi....I am trying to power an ASUS wifi access point with POE using a POE inverter and then an POE splitter. How do I make sure the POE splitter outputs enough DC power to power up the ASUS router?

@AndreasSpiess

2 жыл бұрын

I do not know the products you use. I wold consult the datasheets

Hi sir please help me what poe injector is suitable for my powered device.. I want to use 100 meter lan cable to my powered device. Rated power is 12 volts 2amps of my powered device

@AndreasSpiess

2 жыл бұрын

I think you have to go to a standard POE with higher voltage as shown in the video. 2A creates a lot of voltage drop on the cable.

Hi, im fairly new to using PoE, what i'm trying to do is set up a home CCTV Camera, i have everything all set up and working before mounting the camera in the position i need it, but when i've mounted it and connected everything back up, i don't get anything, the only difference being the location of the camera and the cable from the PoE switch and the camera? any advice please?

@AndreasSpiess

3 жыл бұрын

Unfortunately I cannot do remote debugging :-( Checking each component before putting the system together often helps me to find errors.

Sorry at this time I only have 120 network runs! And Only 30 Cameras Poe

Why buy Cat.5e? Cable (on spools) is priced per weight/copper content which is roughly the same even for higher classes. There's only a small markup for the higher classes so it makes no sense to use 5e, when I cabled my home almost 10 years ago I got a really good deal on Cat.7 so that's what I used.

@AndreasSpiess

5 жыл бұрын

I pinned a comment to the top concerning using better cables (especially for homes, I agree). But I still found a reasonable difference in price between Cat-5 and 6.

A good story, but I'm missing a big WARNING about using the injectors like the one shown at 12:48. That is a simple 48V supply. Connecting it to older, non-PoE prepared loads, will blow the usual 75 Ohm "Bob Smit termination" resistors in the RJ45 inside the powered device. The escaping magic smoke may bother some users...

@AndreasSpiess

5 жыл бұрын

I think I mentioned that you have to pay attention if you connect non PoE devices to PoE cables. But I am not American ;-)

@ariedemuijnck

5 жыл бұрын

@@AndreasSpiess Sorry, missed that (skipped over most of what I already knew). And I'm Dutch ;-)

This was really helpful for my project thank you!

@AndreasSpiess

4 жыл бұрын

Glad it helped!

you forgot 10GBE which is used often for storage (usually for video editing systems).. its very popular.

@AndreasSpiess

5 жыл бұрын

I mentioned it but said, that I do not cover it in this video.

So, if I got it right: no cheap splitters/injectors, right? TP-Link sells slplitters for 80 moneys here but I can get some smaller splitters 24 to 12V for 30 moneys. Are they safe? Thanks!

@AndreasSpiess

2 жыл бұрын

You just have to know what you do. Two 12V/24V splitters on both sides are ok. I just would not mix.

could I connect my dual fan of the raspberry pi to Power over Ethernet of the same MCU?

@AndreasSpiess

3 жыл бұрын

I think so if the fans do not consume too much current (you have to consult the datasheets).

Wow have you been viewing my meta data as I have been trying to figure out how to do this to my new project.

@AndreasSpiess

5 жыл бұрын

Big brother is watching you ;-)

If I have a PoE+ switch and have WAY more than enough power left before hitting it's 150W limit; Can I use it to power up a PoE++ device as long as the total power used doesn't exceed the 150W limit of the switch?

@AndreasSpiess

6 ай бұрын

I do not kow. I never has such high-power devices on POE

So I should be safe to power any PoE device (active/passive) with a cheap passive injector as long as the voltage is correct? Is that right ?

@AndreasSpiess

2 жыл бұрын

The device should not be destroyed by the power on the RJ45 plug, yes. If it is built correctly.

How many meters 12v can run in cat 6 with 2 Amp

@AndreasSpiess

3 жыл бұрын

I do not know. Maybe you find the resistance or maybe even a spec exists.

Bought a RPi4 recently and also the official PoE Hat for my Edge Router x, but since then I've tried to trouble shoot the SBC not turning on. I Started off with a PoE injector that was 24v 0.5a which I realized wasn't giving enough power to the Hat and the Router, then ended up plugging the Pi directly to the Injector but nothing. I returned that and got a 24v 2.5a power supply for my Edge Router x and still nothing, with passthrough turned on eth4////. If the last option of a usb c power supply doesn't work, idk what tf is going on.

@AndreasSpiess

3 жыл бұрын

As shown in this video you first have to look at which standard is used by the Pi hat ( www.raspberrypi.org/products/poe-hat/ ) and then adapt the same standard on your router side.

@timerson41

3 жыл бұрын

@@AndreasSpiess Thanks!!! sadly EdgeRouter x only works with passive PoE not 802.3af, So I guess direct connect to injector Edit: Ended up using an official type c power supply instead

You have to be aware how long the cable is, and if too long, you will have to compensate for D.C. voltage loss.

@AndreasSpiess

3 жыл бұрын

You are right. There is a limitation. Fortunately, it is many meters for those low power applications.

Convert Wyze cam to POE only by using a combination of USB and power connector sharing the ground. Here is a challenge for you I already know how to do POE see what you can do with this question. I would like to keep my wise cam but they interfere with my Wi-Fi and they cause it constantly drop so I want to switch them to Poe. I already know about the adapters from 48 V from a POE switch to 5 V I wanna open the unit up and physically converted to a network camera. And physically disconnect any of the Wi-Fi capability because it constantly crashes my net work.

@AndreasSpiess

3 жыл бұрын

I am no network guy. So I cannot tell if this helps against the crashes.

To my humble opinion there is an omission in the official Raspberry Pi Scheme, the four pins of the connector for PoE are internally not combined, That would give a short circuit. Those four lines are separately connected to the four pins of the PoE-connector.

@AndreasSpiess

4 жыл бұрын

I think you are right. Maybe it is just the way they draw it?

It's good to see another mikrotik user

@AndreasSpiess

5 жыл бұрын

I like it. It works great for the price.

Power over internet (0:14)... :D

@JuanAlfredoMorete

3 жыл бұрын

It actually sounds like a product with a lot of potential... We can export Swiss Wasserkraft Strom over the internet to any destination with internet access ;)

@phinok.m.628

3 жыл бұрын

@@JuanAlfredoMorete But you need pretty fast Internet to be able to receive all the Strom... :P

Can MAKE USB (male) to RJ45 (+power) >--(+20m cable)--> RJ45 (w power step-up DC-to-DC 5v) to USB (female) easy, w this HR911130C ?

@AndreasSpiess

4 жыл бұрын

I have never tried, so I do not know :-(

04:00 - Do you mean 'maximum diameter of 8 cm'?, just curious since the video shows radius of 4 cm not 8 cm. Great video as always, learned a lot.

@AndreasSpiess

Жыл бұрын

You are right, i mean 4 cm radius.

Most important: use ALWAYS full coper cable! Never use CCA (copper clad alluminum) or CCS (copper clad steel) cable! You have also CAT 5, 6 or 7 CCA or CCS cable's. The CAT say nothing about the use of copper of or the use of steel or alluminium! See also this interesting video of 'MrTelephone' kzread.info/dash/bejne/oZ56ssagZ6etps4.html

@AndreasSpiess

5 жыл бұрын

I am not so sure it matters for short distances where the resistance is well below the maximum also for aluminum. Other things like twisting are more important in my opinion.

@Darool

5 жыл бұрын

altho CCA is perfectly fine for short runs, full copper is always a better conductor indeed, but as Andreas said, twisting and shielding the twisting is way more important then the small resistance difference.

Another common use for PoE is IP phones in call centers etc.

@AndreasSpiess

5 жыл бұрын

I did not know. Thanks!

FYI Raspberry 3B+ isn't a Gigabit Ethernet it uses Microchip's USB to Ethernet (Fast Ethernet). Correct me if am mistaken.

@retropctech2407

5 жыл бұрын

The Raspberry Pi 3B+ has Gigabit Ethernet but the NIC chip ist connectet via USB 2.0 to the CPU. So the bandwitdh is limited by the USB2.0 standard

Topic of possibility to get short circuit with non isolated POE devices is missed :-(

@AndreasSpiess

4 жыл бұрын

Thank you for the addition.

Hey Andreas can you please dumb this down for me. Can I not just plug my Raspberry Pi 3 and 4 into my PoE switch? Am I risking damage by doing this or do I have to measure the voltage?

@AndreasSpiess

3 жыл бұрын

You have to do it according the manual of the device you bought.

@jonasbhmer9183

3 жыл бұрын

You cannot power the PIes without a poe-hat, but the network could work. It has for me. Today i was educated though, and realize I've been lucky, since connecting or disconnecting a "live" poe may surge and damage the PD. Your best option is to use a FAST ether cable without terminating the power leads, or to insert a poe splitter to accomplish the same.

@olafcreed4726

3 жыл бұрын

@@jonasbhmer9183 When you say "Fast ethernet" are you meaning to say nothing better than a CAT5 cable?? Or can I use my custom CAT6 cables? And not including the power lines (brown or blue..) will enable POE?

You Need Cat5e Cables for Gigabit. But now i think you will only get Cat6 or higher cable. There is no different in the Price. The only difference is for Cat5e you need other Keystone (connector) Equipment because the cat5e and 6 cables have difference diamenter. The MikroTik Switch also support passive and active poe! You must connect both power supplys and you have a lot of Information in the menu. But it is good that you test your RPi4 with poe before i destroy my one ;) Normale active poe Devices don'T want to work with passive switches. And be carefull. normal Devices have Problems with passiv poe 48v. I know a lot Laptops how only runs on 100MBit because poe destroy the chip ;). passiv poe normaly works on 12 or 24V.Your Video is very informativ but a Little bit to theroetic.

@AndreasSpiess

5 жыл бұрын

Thank you for your added info!

@tin2001

5 жыл бұрын

My boss's Toshiba laptop only does 100mbps now because he plugged into the POE port on the worth Unifi switch (which supposedly has the POE disabled anyway). I'm now a fan of only using 802.3af....

@meinsda5983

5 жыл бұрын

i know this Problem if you connect to an unifi switch ;)

i dont understand a word your saying, but this is cool haha

@AndreasSpiess

Жыл бұрын

This is probably not the easiest stuff you selected to watch. It is probably more for nerds ;-)

Sweet, we no longer need crossover cables!

@AndreasSpiess

5 жыл бұрын

At least not with new equipment.

@SittingDuc

5 жыл бұрын

Pretty much all computers, laptops, network switches, etc from the last decade or longer support "auto MDI/MDI-X", which means if they can't link up normally, they internally swap rx and tx (green and orange) and try again. No more crossover cables. And gigabit Ethernet uses all four wires for both RX and TX, so they are all good too.

TNX 4 another great video ! 73 N8AUM

@AndreasSpiess

4 жыл бұрын

You are welcome!

we get 40 what?

@AndreasSpiess

5 жыл бұрын

I do not know.

Ethernet connectors are 8p8c not RJ45. RJ connectors have a "key". This is a very very common mistake and I bet half professionals does it. en.wikipedia.org/wiki/Modular_connector#8P8C For mode A and B I would not talk about spare pairs but in terms of groups of pairs. Mode A uses the pairs on pins 1 2 3 6 and mode B those on pins 4 5 7 8. And yes for 10 and 100Mbps datas are on the same pins than mode A. With Gigabit it can be mode A or B... en.wikipedia.org/wiki/Power_over_Ethernet#Pinouts Concerning the wire resistance, you have to double the distance in your calculations because the current has to come back the other way... No don't install cat 5 in your walls. Minimum is 5e and I would recommend going for 6a...

@AndreasSpiess

5 жыл бұрын

Concerning 8p8c: I never heard anybody using it. So I would not consider it as a mistake to use a name everybody knows ;-) Concerning Gigabit and mode B: I am not sure what mode B means in this case. Power is transported via data lines for Gigabit Ethernet. But I am not a specialist. Concerning double resistance: I found that it was already counted for in the specs (forth and back) Concerning Cat 5/6/7. Maybe you look at my pinned comment?

@cmuller1441

5 жыл бұрын

@@AndreasSpiess so, if I understand you well, you think that if 90% of people are doing a mistake, it's not a mistake anymore?... For the resistance, it depends on the source of information. Sometimes it's is one way, sometimes it's the "loop resistance" that is provided.

@AndreasSpiess

5 жыл бұрын

I live in a democracy where we think, that even if 51% have an opinion they are right ;-)