What an amazing teacher you are! Your instructions are always clear, and give me the courage to say, "I can do this." Thank you!

These tips are awesome! I’m definitely tucking this one in my Jennifer maker folder to rewatch! Thank you and your staff, and Greg, again for all of the time and work given for these videos. Merry Christmas!!!🎄🎁

Awesome video to end the 25 days of crafting. Thank you so much for all your help. You are an amazing and generous soul and I appreciate you.

Thank you for these 25 days of tutorials. This has been so much fun and very informative.

I’m so thankful I found you!!! Honestly you’re an Angel. After wanting a cricut for a long time I finally got one for Christmas. I knew it was under the tree. When I ordered it I told the hubby “this is what you got Me” lol. After almost a month n a half of watching your videos I finally got to open my cricut and while I was intimidated I had the courage to jump right in and follow along bouncing around your videos to learn every time I got hung up. As I type this I’m actually making your Santa treat tray. I’ve printed off your printable book for the maker and have several videos of yours saved to make some of the crafts that you share with everyone on your website. Thank you so much!! I feel like I’ve spent this holiday season with you lol

Thank you and God Bless You for all the tips and tricks that you share with everyone. I save each and every video you do. Praying that Someday that I can afford to get me one. I love crafting and it helps me so very much 🙏 God Bless you and have a wonderful and blessed day 🙏

Love All Of The Hacks!! Thanks Jennifer 🥰 Praying that you feel much better tomorrow 🙏🥰🙏

Thank you for all the work you do in putting these tutorials together. They are a huge help to me. Merry Christmas!

Love the easy way to put the cover back on the mat ❤️

Merry Christmas Jennifer! You are truly a blessing to us, sharing your knowledge with such love. Can't wait to see what the New Year brings!

And I've just seen your video from 4 weeks ago about the "custom" button to adjust pressure! THANKS 😁 excellent advice!!!❣️

@JenniferMaker

Жыл бұрын

You are so welcome!💗

Merry Christmas to you and your family. I’m looking forward to watching the video. Thank you for all of them, you sure do an amazing job and I’m learning so much. ❤

Merry Christmas to you and your family and thanks so much for all the wonderful tutorials and being so patient with all the questions we send in.

Mery Christmas 🎄 to all cricut crafters. Thanks Jennifer Maker for all the great tutorials and tips

Thank you Jennifer. These tips are amazing.

Love these hints and tricks. Thank you, Jennifer

Love, love this video you made for all the tip , because lots of Tik Tok don’t explain or tell you the material , the ingredient , mesurment etc . They are to fast showing . ❤️😊👍

You have been such an inspiration these last 25 days, I am so excited to get going on our Cricut. I have learned so much now I just have to put it into practice. Thank you and Merry Christmas!

Merry Christmas! Thank you for all you share ❤️.

Agree with Cheri. I've cut out of cardstock before using any vinyl so it's not wasted. Then depending on design, I can use oc a card or even frame it. #23 with the weeding tool, did not know about the top of it. For weeding I have used nail polish holder, square tissue box mostly I use a small flip top looks like our garbage container from the dollar store. Works great for any crafting. Thanks for sharing these tips, saving this and will be writing them in my tips book.

These tips are life changing! Thank you!!!

This has been a great series thanks to you and your whole team. I wish you all a Merry Christmas.

Thank you so much for the great tips. Learning mire and more everyday!!! Merry Christmas 🎄

This looks very intriguing!

Awesome!! Thank you Jennifer!!

Thank you, Jennifer, I think my favorite tips are the ones that help to align the different layers of a design.

@jacksonpeterson6899

Жыл бұрын

Hi there! You've a gorgeous picture on your profile! I just decided to stop by and say Hi! I hope my compliment is appreciated 👍

This video was so good I didn’t want it to end. Thank you, Jennifer!

Thank you very much for working so hard so we can make beautiful handmade gifts for Christmas. You and your team are very much appreciated!

LOVE THE TIPS!!! Thanks and have a great day!

Thank you for all the projects and tips during Merry Mingle 2022!

Thank you Jennifer, great hacks.

I love learning new hacks! Can’t wait 😊

Merry Christmas Jennifer....thank you for all your guidance....your videos have taught me everything so far....looking forward to the new year.

@jacksonpeterson6899

Жыл бұрын

Hi there! You've a gorgeous picture on your profile! I just decided to stop by and say Hi! I hope my compliment is appreciated 👍👍

Great tips! Thanks for sharing with us!

Genius with cornstarch or baby powder. As a 51 year old taking my glasses on and off gets crazy. I haven't tried my cricut light pad yet.

I just watched this and got some great suggestions. Thank you for doing this.

Thank you soo much sharing your amazing projects and tips with the world! You are truly the best teacher. Merry Christmas to you and your family 🎄🎁Blessings 🤗❤️

Thank you so much! This was so helpful for a newbie like me!

Thank you for 3+ weeks of fun!

Loving all of these tips.

Thank you. Learned some good tips this morning

AWESOME TIPS THANKS JENNIFER

Love these videos, so helpful.

Thank you foe sharing 🙏

Love these tips!

For Acrylics. Do you design on a piece of paper placed on your mat first = i.e. corners on 5 L 5 H. (Drawing). Then you will know exactly where to put your acrylic on a mat and you will know if your design matches the size of your acrylic or whatever material you wish to engrave.

@JenniferMaker

Жыл бұрын

You could design like that, if you'd like. You can also use a guide in Design Space or the use the pen, like we did in our Engraved Keychain tutorial. 😊🌻

This is fantastic Jennifer! I cut my first vinyl yesterday and they were small designs so the first one was a disaster - none of the small pieces of vinyl would stay behind.

@JenniferMaker

Жыл бұрын

Glad to help!

Thanks for the tips!!!

Loved this! I see hacks but don’t always know what the hack does, or if it even actually is helpful. Thank you for this video

@JenniferMaker

Жыл бұрын

Glad you enjoyed!💗

Merry Christmas to you and your family and team.

These were some great tips - I definitely learned some new ways to do things. Thank you, Jennifer.

@jacksonpeterson6899

Жыл бұрын

Hi there! You've a gorgeous picture on your profile! I just decided to stop by and say Hi! I hope my compliment is appreciated 👍👍

Great tips!! Thank you

@JenniferMaker

Жыл бұрын

You are so welcome! 😊🌻

​Thanks for all tips

Merrry Christmas and have a wonderful time with your family. It was great g etting all the great classes his yea. Thanks so very much.

Thanks for sharing the free fonts! I'm excited to try this!

@JenniferMaker

Жыл бұрын

You are so welcome!

Merry Christmas. As I don't do TikTok, guess I will miss the last thing. But have enjoyed all of the rest!!

@JenniferMaker

Жыл бұрын

Gerry, I'm sharing the tips I learned there so you don't have to do TikTok at all. It's just Cricut tips and tricks. :)

Merry Christmas!!!

Thank for a fun packed 25 days of learning and making.

Love your videos you are the BEST 👌 ❤

Awesome video. Just got to watch. I’ve used some of these hacks. Going to try the others. Thank you and Happy New Year 🎊

@JenniferMaker

Жыл бұрын

Happy New Year!

Merry Christmas and Happy New Year ☃️🎄🎊

Love the tip about the vinyl roll to keep the mat from bending. Cricut should have an extension bar/pull out to help wiht this for long cuts.

@JenniferMaker

Жыл бұрын

Thank you!

Merry Christmas everyone🎄🎄

loved these 💕

@JenniferMaker

Жыл бұрын

Thanks!

Merry Christmas ❤

Can’t wait to see the newest hacks.

So many useful tips!

@BrananKDesigns

Жыл бұрын

Hello Jennifer. I am not sure what your message means or what I need to do.

I love all your videos these are great ideas

@JenniferMaker

Жыл бұрын

I'm so glad you find them helpful! 💗

Cool time while creating

Thank you for this video! I'm struggling to understand the parchment paper trick lol 😆

Thanks..that’s great..!!!

Great ideas!

@JenniferMaker

Жыл бұрын

Glad you like them!

Tip regarding fuzzy leather side - you can make it smooth by using tokonole creme or mixture of pva glue and water. Apply to fuzzy side and burnish with a hardwood stick. After drying the surface will no longer leave anty type of lints or specles.

@JenniferMaker

Жыл бұрын

Thanks for the info!

hi From Alaabama, i found this one very helful as well

@JenniferMaker

Жыл бұрын

Thank you!

Great quick go to reference for all these tips my older brain loves it!

@jacksonpeterson6899

Жыл бұрын

Hi there! You've a gorgeous picture on your profile! I just decided to stop by and say Hi! I hope my compliment is appreciated 👍👍

Hi Jennifer I was watching one of your videos when you were cleaning your craft room and notice on the wall there is or was a flower that you stored your little bottles of paint. I would like to know if you did a video on how you made it it’s so pretty ❤

@JenniferMaker

Жыл бұрын

Here it is! jennifermaker.com/craft-paint-storage-organizer/

Thanks for the hacks

@JenniferMaker

8 ай бұрын

You are so very welcome!

Thank you for your 25 days, it has been wonderful to learn and watch. Is there a svg for number 18, it looks like birch trees on a vase with some words across the top. I like that design

Loved the video. Could you do a video on how to do those intricate cut out envelopes and card edges, like they use for wedding invites? I loved the card you did for the foil feather video, but how did you get it to cut out just one side of the feather? Can't wait to see what other projects you create! Keep up the great work and thank you for making your svg library free. It's been so much fun to create alongside you!

@JenniferMaker

Жыл бұрын

I designed the feather card that way. Here is a tutorial on envelopes. jennifermaker.com/how-to-make-an-envelope/

Why write on the clear mat covers? Cut vinyl for them so the look neat too, I’ve done that with all mine

I can't wait! No, really I wanna watch it now, forget presents under the tree! Vid. E. O. Vid. E. O! Lol

I Love your videos . I haven't decided which machine to purchase yet . My daughter and I love stickers an decals for her car so I think the Joy would work but I also make gnomes so I need something that will cut fabric for the clothes . Does the Joy cut fabric ?

@JenniferMaker

Жыл бұрын

The Maker and Explore can cut fabric. Here is a comparison. jennifermaker.com/which-cricut-should-i-buy/

Your have a great staff also.

These are awesome, Thank you. I don't 'tik tok'. Thankfully I do KZread.

Hi Jennifer, Your channel has been recommended to me to learn all about my new cricut joy before I start. I know nothing about the cricut or which vinyl to buy. I was told just buy vinyl which now £100 later was a mistake i should of never done, thinking I could save a bit money by not buying cricut joy smart vinyl. Anyways 15 hours later after typing. I bought vinyl is many colours colours which are all glossy to find out its 641, I think this is for outdoors and not for glasses, christmas baubles ect. Can you please advise which number of vinyl i should buy. Thank you. You have a new sub. Luv from the UK

@JenniferMaker

Жыл бұрын

There are different types of vinyl, but there is no reason you can't use "outdoor" vinyl on something that would go inside. Check out jennifermaker.com/ultimate-guide-to-vinyl/

@lynnemorton6055

Жыл бұрын

@@JenniferMaker Thank you so much for replying, I feel alot better now knowing I dont have to throw it out. The company I bought it from have just replied staiting the same but I cannot use it on glass/plastic or use it outdoors as it is not waterproof. Its very much appreciated that you replied and advised me. Luv from the UK

Can you make acrylic invitations with the cricut?

@JenniferMaker

Жыл бұрын

Acrylic invitations? You can engrave on acrylic with the Maker or cut vinyl on all the machines to apply to acrylic.

You are my go to person! I have learned so much from you in the past 9 months. I loved these hacks. MORE please!

Hang your mat on a hook first then hang the plastic sheet over it. Tip for those who don't have the fancy tablet holder ;)

I saw a $259.00 Christmas Ferris wheel in a retail store window. Love the idea, but I couldn’t stomach the price. Would love some crafty ideas to make the project😃

Less pressure works best for Siser Easyweed. More tears it up.

Won’t be doing TikTok. Hope to keep seeing your info here!

Jennifer , does using a wad of aluminum and poke it with Cricut blade help sharpen it?

@JenniferMaker

Жыл бұрын

It only cleans the blade from debris.

Hi Jennifer, Love your videos! I had an Easter Bunny idea that you may be able to help design. It would use the two clear dollar store rose bowls like the ones you used for the lighted snowman. He would need ears, a face, whiskers, cotton tail and maybe a hat or big bunny feet. I know, I'm asking for a lot...that's why I can't make the files myself.

@JenniferMaker

Жыл бұрын

Great idea!! Can you please request that here? jennifermaker.com/projectrequests/

❤❤❤

@JenniferMaker

Жыл бұрын

Thank you so much for watching! 😊🌻

❤

I love the hinge method! I always struggle to apply my vinyl to large surfaces when making home decor. I will definitely use this tip!

I purchased the cricut college a few years back, can you tell me how I find the course.

@JenniferMaker

11 ай бұрын

When you log in to Teachable at academy.jennifermaker.com/login you will have access to your course and all of your learning materials. If you would like to change your email address, simply click on the little circle icon in the upper right corner of the page, then click on Edit Profile to change your email address. If you are unable to login, please clear your cache and try again. If you need to update your password, you can do so here at this link: sso.teachable.com/secure/152016/identity/forgot_password

a few good tips but most of them were kinda common sense or things we've already seen a million times. Still nice to have everything in one place though!

Where did you get the table that your JOY and snowman are sitting on? TIA

@JenniferMaker

Жыл бұрын

We designed and made them on our 3D printer. We plan to share the print files on our blog at some point for anyone else who wants them. There are two styles -- the one on the left uses PVC pipes, so it’s height adjustable to your needs. The one on the right is all 3D printed except for the table, which is a piece of wood screwed to the legs. Both meet the requirements in Cricut’s Safety Instructions for “a flat and stable surface” as the Cricuts are just sitting on stable tables.

@darlenesnyder34

Жыл бұрын

Thank you very much. Please let us know when they are available.

what is the trick to taking the backing off the transfer tape so you can apply it to the viynl

@JenniferMaker

Жыл бұрын

If stabbing it with the weeding tool doesn't work that well, you can slice the top corner of just the tape and not the backing with an X-Acto knife to peel the backing off.

@carmellachapman9331

Жыл бұрын

thanks for the tip, will give it a try on my next project. and I took your advise about reusing the transfer tape. better than throwing it out after each use.