Looks like you built another tack driver! Nice DPG Nice!

Love 25 creedmoor videos

Excellent shooting and it looks like a great load you have there. Your channel is one of the greats out there for precision shooting.

Great video as always Kenny. I’m liking the 25 Creedmore more every time I see you working up different loads and shooting it. Keep that trigger finger nice and warm during the match. Best of luck.

Looks like a performer! The camera footage looks a ton better as well. You guys should do well.

Great info as always! Thanks for sharing

Good luck Kenny. You’ll do great

I'm glad to see I'm not the only one with a flinch. And he does this for a living. That's why I'm looking at a 257 ARC for high power silhouette. Nothing more than it needs to be, but takes every advantage of what modern ballistic science has to commercially offer. Where am I wrong? Thank you for putting this information out there.

I hope pristine warranties your bolt without any hassle and I agree with your assessment on the bolt compromising the strength of the handle. Definitely a design flaw imo. Looks like they’ll be back to the drawing board.

@EagleEyeShooting

Жыл бұрын

They have great customer service and have replacement bolts on the way.

Lol i think the fun in building is the whole process. The hiccups make the final result that much more rewarding. Thx for spreading the knowledge. And keep it up.

Best of luck at the competition.

Great video! I found better velocity and ES with the large primers also. I think a better burn in the chamber and barrel. Thanks for the shout out!

@EagleEyeShooting

Жыл бұрын

Anytime Anthony! Thank-you for figuring out this cartridge. I nearly gave up lol

good stuff kenny, nice lot of cci200s,

Like the looks of that action....

Awsome stuff

Good luck in your upcoming competition and I have a gun smithing question for you on muzzle threading for a 308 win the barrel I have will not take 5/8×24 threads unless you cut it back 6" it will do a 9/16 ×24 thread at the current muzzle end but it will have to butt up against the crown of the barrel to be tightened against or would you cut it 1/2×28 ? Current muzzle diameter is .562 and one inch lower is .575 what is your opinion of what threading should be done.

Hey Kenny what camera / optic system are you using to capture the bullet trace for your long range impacts? I saw the tacticam logo, but wonder what version and what you have it attached too. If you know of something even better I would be interested in that too. Thanks in advance.

@EagleEyeShooting

Жыл бұрын

Hey brother! I have the Tactacam spotter LR attached to my Sig Kilo 2500 BDX. I would recommend looking at getting the Accufire Ominus spotting scope. Seen it first hand and is the best for film capture long range

Excited to actually see the bullet trace on every shot

Would be curious to see the results if you repeated the Alpha brass comparison using CCI 450s?

Please let us know any updates to your cartridge you have developed. That is one caliber that I'm very impressed with....

@assetprotection5389

Жыл бұрын

He did not develop shit🤣

Kool 🎯 👍🏻✌🏻💯🐴❤️🤠

Awesome video . I have found that with my 6.5 creed the large rifle primers are more accurate than the small rifle as well

@Lure-Benson

Жыл бұрын

Due to the primer problem of no primers for sale and when primers do show up, they are sold out in the spot I bought some Peterson brass 308 in small rifle primers size. Shooting small rifle primers in a 308 is crazy causing nearly every shot is a Hugh hang fire and at least hear the firing pin smack the primer and then the bang. Depending on types of powders and power charges the hang fires can get longer and worst with a few cartridges going off after I lowered the gun blowing holes in the dirt in front of me. I did found online site some Ginex primers from Bosnia in large rifle so I am using them now with pretty good loadings in the 308 and 6.5 - 284 Norma but if used in the 7 mm Rem mag they cause crazy hang fires.

I love this rig. I love the carbon fiber to keep the weight down.

Hey Kenny do you have any issues with button rifle barrels vs cut rifling when adding muzzle devises. like the crown and or the tenon growing

was looking at crown ridge barrels last night. it says they have the 25 creedmoor short throat. Is that what your running with this rifle?

Does annealing the previously used brass help any with the expansion memory?

Awesome video and best of luck at the match! I had a few questions.. What length Zermatt action is that? Short or Med.? 2.860 seems close to max for a short. What Burris scope is that? I had to run the Berger 135's @ 2920 through a calc. All I have to say is WOW! Not only is 25CM the way to go for NRL Hunter.. But it would realistically take most big game out to ~900yd! A real eye opener to the cartridge and NRL requirements in general, Thank you.

@benbowditch9265

Жыл бұрын

I also just seen that Hornady is releasing a 134gr ELD-M! .645/.325bc. You'll have to get your hands on some and see if they can hold up to the Bergers 😃

@EagleEyeShooting

Жыл бұрын

Thanks for watching Firstly! The action is just a standard short action with the Wyatt mag well cut. It will accommodate COAL of 3.010 from my testing if you have magazines capable of that length. Max length on majority of polymer mags are around 2.810. Magpul after minor filing gives 2.890 so I have small amount to grow for this particular 25 Creedmoor chamber. Yes im excited about the Hornady 134gr ELD's. I already have an order for some The optic is the Burris XTR III with SCR reticle and Burris race dial. IMO a great scope with very wide eye relief. The XTR Pro would be a step up recommendation

What length barrel you running?

Great video again what neck tension do you aim for

@EagleEyeShooting

Жыл бұрын

1 to 1.5 thou under projectile od. Thanks for watching!

So this is with the KRUD spec reamer correct?

Do you anneal your brass? Especially before full length sizing a case, after it has been once fired out of another chamber??

@EagleEyeShooting

Жыл бұрын

I anneal everytime before full length sizing

The .25 creedmoor is really impressive. What kinda of barrel life does it have? How does it compare to the 25-06? Great work as usual!

@user-eg8hb8xt3j

7 ай бұрын

Lol

SendIT Man!!! Awesome work….

Hey Kenny, if you ever do try anything with that pristine action make sure that all the lugs are making contact. I've heard stories of only 2 of the 6 make contact

@EagleEyeShooting

Жыл бұрын

This explains why accuracy increased when I swapped the barrel to a Zermatt Origin. I Dykem both Pristine actions and have very minimal contact 1-2 lugs with both actions. Thank-You!

Looking good sir. I have one of the Pristine actions that I will be testing soon. The bolt issue is something I’ll be looking for.

@EagleEyeShooting

Жыл бұрын

Just ran the other one at the NRL Ghost Hunter match in paulden. Only had feeding issues but other than that, ran great. Hard to justify the price when a terminus zeus is not much more

@PrecisionRifleNetwork

Жыл бұрын

@@EagleEyeShooting yes I agree.

Can someone try the new 134 eldm?

👍

Better dress for the weather. Cold wind and rain possible snow

@EagleEyeShooting

Жыл бұрын

Saw that. Separates the men from the boys. I look forward to the weather

Big fan of the 25 creedmoor.. With that said you can't expect the same charge weight to shoot the same in two different brands of brass.. alpha and peterson don't have exactly the same case volume..

So whats the velocity/powder differences to a 257 Ackley or 25.06?

@brendangee593

Жыл бұрын

that fact Lapua creedmoor brass is common and cheap, and it fits a short action easily.

Personally, I like the 30 Nosler or .300 Win Mag Mk-22

That's too bad about the Pristine Action. I was hoping to see more about on it running in your sandy environment.

Is Ray your teammate?

@EagleEyeShooting

Жыл бұрын

Not at this match. Ill be teaming up with the owner of Thermal Suppressors who is local

APW from south africa makes the best braked suppressor on the market, check it out

You need a AMP Anneler would have helped with the resizing your brass you will not get spring back

@EagleEyeShooting

Жыл бұрын

Annealing doesnt help at the case web where the most pressure is and where FL sizing dies do not size the best. This is where the problem lies

Should bump that sholder my pristine is smooth and just hit a moa plate at 1 mile

Man, the groups show you that its not shooting good. Forget the carbon ring, thats a terrible way to judge it. SMALL GROUPS MATTER

@EagleEyeShooting

Жыл бұрын

Cool.... the folks chasing groups are not the ones winning PRS/NRL matches. 100 yard groups mean little to nothing if you can't hold that at distance

Pristine... To me it sounds like when people write "hardworking" on a resume... Everyone knows you are not likely hardworking if you have to write it down.... So... Calling it pristine...

@EagleEyeShooting

Жыл бұрын

Lol 👍thiers a few reviews out their. Credibility is everything IMO. Thiers those who review products they get for free, and thiers those who put them to the test before a review

@thorpkw5

Жыл бұрын

@@EagleEyeShooting Can you make me a barrel for Cz 457, Shillien 24". Please ...

@EagleEyeShooting

Жыл бұрын

@thorpkw5 I have some tooling that should be arriving soon that will square up CZ457 barrel tennon and action face and allow me to build barrels for your actions. Soon as I get it, ill let everyone know and do a video

Great video, I was considering 6x47, 25x47 or 6gt ,, 25 gt too slow too hard to chance a good balance, I feel 6.5x47 has better balance but getting slow also , 25 Creed is a good balance. I'm thinking 25x47 would have plenty of wiggle room to find a node. Ideally I would like a 123 gr 6x47 . That's unoptanium so 25x47 is that I'm left with , 25 Creed would work but I will always want the longest bullet I can get and it seems x 47 would help in that department but probably not worth it because of lack of brass . And creed is the way to go , Not sure, if anyone has any comments or recommendations, I'm interested to hear them.

@EagleEyeShooting

3 ай бұрын

I did a recent video on the 25GT check it out. It's not slow at all. I'm able to achieve 2900 fps if needed and has a 4gr accuracy curve. I'm currently using 25GT for competition

@samsungtv4u

3 ай бұрын

@@EagleEyeShooting Ive played 6xc. Then with the 25 gt , sold it , found it hard to find a sweet spot, rather too hot or not fast enough with the heavy pills that is with the Burger 133 Burger 135 Hornady match 134 all had a hard time until I went down too 110 Sierra matching one nosler 110 Burger 115. So I might as well used to 6 mm at that point. I feel like the case is a little too small for the 25 easily find The sweet spot , I would have been happier with a 6 gt. The only reason I went with the 25 just because 25 is at least usable for hunting with 125+pills . I just watched few of your videos on the 22, alot of time and effort ,great stuff , your fundamentals are solid. Last week I ordered a bravo stock, springs , firing pin, for my 457, I also ordered a 22 inch 9-twist barrel for sh*ts and giggils. It's a " acculite 22 brand so I'm not expecting much 😕 in fact I'm pretty sure my 16 inch pencil stock barrel can out shoot it ,, but spring is in the air I just planed 3 acres of sunflowers and crows are decimating the field by the hundreds , I wanted to go out there with my kid and take care of the crow proplem , I'm sure 1/8-1/6 of my seed has been eaten .. anyway sunflowers are cool but it's probably just an excuse to buy some gear :) I shoot a sako TRG and I ordered the bravo stock to build my son a mini TRG, I could not find anything decent that I could buy asap hence the Iacculite barrel , I figured I'll get the 9 twist just to play around with it since I have a bunch of subsonics, but sooner then later I will run out and at that point I would like to get a proper barrel for the cz457 , please let me know if you know anyone who's interested in selling one . By the end of this year I would like to rebarral the TRG 22 likely to 25 CR , or 25x47 @ 2850. Maybe you can rebarrel the TRG experiment a little find what you think would work best , I can let you borrow the TRG for a few months to play with I think it would be Great for your channel. I have a trg barrel wrench laying around waiting for its debut. Anyway let me know if you have any 457 barrels, or how to go about getting one . And if you're interested in tinkering with the TRG 22.