Your channel is one of my favourite on KZread no joke. Your quality is so good and you have unique content, not to mention you’re a fellow Canadian!

@DirtGarage

3 жыл бұрын

Wow, thank you!

Good stuff buddy! Making my way through a bunch of them while working away in the shop. Keep it up 👍🏻

@DirtGarage

3 жыл бұрын

Awesome, Thanks man!

Just recently discovered the channel. I'm an avid Story till now watcher. Happy to be able to support you guys as well! Keep up the good work!

@DirtGarage

3 жыл бұрын

Awesome! Thank you!

You guys made it look way too easy. Makes me want to swap my 22R now in my 84'. If only it didn't run like a dream lol.

@j_mars_cars

3 жыл бұрын

Same. My 22re 2nd gen 4runner is so rare, it would be a waste to swap until the engine dies

@DirtGarage

3 жыл бұрын

I mean it really wasn't necessarily difficult. That is what I said about my 3.0 on my truck, thing would not die, so I swapped it anyways!

@buildadventure404

3 жыл бұрын

@@DirtGarage The fear of everyone... the wiring... could you give more info on the wiring?

@Mr07bowtie

3 жыл бұрын

@@DirtGarage what motor mounts did you use on the block? 2wd or 4wd 3.0 mounts?

@3.0colorado21

3 жыл бұрын

@@buildadventure404 I found out there are a few companies that make harnesses specifically for these swaps.

ur the most positive guy ever! thanks for the videos

@DirtGarage

3 жыл бұрын

I appreciate that!

I have been looking for something to do with my 1983 22R California, thanks for the great idea

just finished my 1uz swap on a clean 93 4runner loving it so far !

@rook13pdx

2 жыл бұрын

Build thread, pics, video! Wanting to do this forever. Got the 4runner, lookin for Lexus 400. It’s good to see the work of others yo - share the build!

@ninjapig8

Жыл бұрын

How did you get the tach to read correctly, going from a 6cyl to an 8cyl?

nice man! so THAT's how you did the motor mounts hahaha! i never noticed that when i was there... i cut off my 22re mounts, and moved them back, and that is why i need a cowl hood. you sunk the engine lower haha. good to see this thing up and running! it was pretty cool meeting you all in person as well.

@DirtGarage

3 жыл бұрын

We physically could not have the motor any higher, the transmission is stupid tight to top of the tunnel. Either way I'm very happy with the sunk in engine. Looks great in there.

I literally have every part for this except the adapter from r150f to old style toyota tcases. Swapping a 04 tacoma drive train and wriring into my 85 4runner. So glad to see a video like this

@DirtGarage

3 жыл бұрын

Very nice! The older T-Cases are nice. But this truck did not have duals or even a 4.7, so not losing much by using the 3.0 t-case. We did keep the old case, just in case he wants to go duals in future.

@dozercole73

3 жыл бұрын

@@DirtGarage Did you wire the engine harness and everything to the old cab harness?

Very nice. You make it seem so easy

@DirtGarage

3 жыл бұрын

Thanks! Really was not very difficult.

This is awesome man! New Sub right here.

@DirtGarage

3 жыл бұрын

Awesome, thank you!

I’m doing a 3.4 swap on a clean 93 this spring... I’ve collected red all the parts, time to do the work 🤘

@Brian-vz7xe

3 жыл бұрын

How does that work? With the harness for the 3.4 and the Ecu. I am just assuming that the older Tacoma's don't have all those electrical sensors and could just cut them off.

@ClearWater7.62

2 жыл бұрын

Whats needed for the swap? I love the 22re but its too slow

I have an 85 as well. Like many other vintage enthusiasts on here, I wouldn't trade mine in for a 21'. I am very fortunate to have a near mint 85. 2WD so I'm partially jealous of your 4x4 but here in Virginia, a bed full of sand does me fine in Inclement weather!

@fordhuguley8699

2 жыл бұрын

i just bought an 85 xtracab 4x4 with the solid axle and only 150k miles on it a few months back. id rather have it over my 2008 tacoma

@slowby-wan-kenobi

2 жыл бұрын

Amen as Brother.

Im seriously looking into doing this but I have the 22RE with a built gear tcase so I would need the R150 and then Marlin's adapter for R150 to Rf1A tcase. What resources did you use to help with the wiring?

Thank for the video. Lee it up DG

@DirtGarage

3 жыл бұрын

Thanks!

Gotta love the old Toyota Utes 👌👌 or pick up I should say 😂

Nice to see the pos’s heart going again!

@DirtGarage

3 жыл бұрын

Nice to see the 85 going again too!

@mountainjeepmike4408

3 жыл бұрын

@@DirtGarage this is true!! I’m about ready to head down for some wheeling!

Was there a big weight difference going up to the 3.4? I am wanting to put a 2gr fe in longitudinally

I’m doing a 3.0 v6 to 22re how did you connect the wiring Did you splice threw it

I’m going from a 3.0 to 3.4 I’ve been doing tons of research I’m still a little scared but this video makes it seem like a breeze, and coming from a 3.0, it’ll be a bit easier I hope. Excluding the wiring is everything else sort of plug and play my worries are the small things that always get you.

@DirtGarage

3 жыл бұрын

Feel free to DM me on Instagram if you need advice. Otherwise I am doing a 3.4 swap live stream this week!

@ericwright6672

Жыл бұрын

Body lift no 1 ,use your 3.0 oil pan if it's a straight axle, & then wiring, & do an egr delete & headers you will b golden, just remember they are the same block the heads & intake flow better & r taller!

You are great brother 💓

I've got a 95 with 5vz swap and manual swap. Do you have any info on getting the reverse lights working? I've been trying to search around for good direction, but with little luck.

After this video I started pricing out the swap for my 95 3.0. It just got timing and all belts and stuff and runs great. Buuuuut ANY bit of uphill and this thing struggles bad. I could regear it and make it work..but all my friends have 3rd, 4th, and 5th gens and I just can’t keep up with them until we get on the trails.

@Mpinecone

2 жыл бұрын

Did you ever do the swap? I'm thinking about doing it to my 1995 3.0 as well but im hearing that i may need to get another ECU, move my oil pan for my 4X4 to work, and i just want to know if you somehow overcame those problems

@3.0colorado21

2 жыл бұрын

@@Mpinecone no I haven’t. I’m going to try and kill the 3.0 in the next 20k miles or so lol and when that happens… I decided to go with a 2uz from a donor lexus ls400 my buddies grandma sold me.

Awesome content! Do you happen to have a write up of all parts you used/needed? Going to do this in a 3vze truck

@DirtGarage

3 жыл бұрын

I have a write up on my personal trucks 3.4 swap from 2016. www.yotatech.com/forums/f160/clintonp929s-3-4-swap-89-pickup-290977/

I have a 99 4runner 3.4 Auto of course but i wanna swap it for a 5 or possibly 6 speed so what are my options 🤔?

Do the 3.4l bolt up to the 5 speed trans easily? Or is there alot involved.

Wow. The v6 trans crossmember and the r150 just bolt right in place? How come some forums online say u need to move the trans 4” forward etc and it’s not bolt on? Is it just different between factory solid axle and ifs frame?

That engine is real good long lasting & strong.

@DirtGarage

3 жыл бұрын

Yes, same engine I have in my personal truck.

dude I need help! I am doing a 1985 5vz swap. I have a 2004 tacoma complete harness and a 2000 5vz 4runner ecm. I believe I won't be able to use it because it probably has the immobilizer. do the 1st tacoma 5vz have immobilizers? thanks

Awesome video. What about some references on how to wire up the 3.4. I have a 94 Pickup SAS’d with a blown 3.0. The only thing holding me back is the engine wiring. I’m sure I could figure it out due to the fact that I’m taking a auto electrical class in college rn and have access to the wiring diagrams. I don’t want to cough up $600 for a ORS wiring harness. Thanks in advance.

@DirtGarage

3 жыл бұрын

The wiring is straight forward. Pretty much need to give the ECM power, and connect ECM to COR to tell fuel pump to turn on, and BAM its ready to start. Then just gotta figure out how to get the gauges to work, pretty straight forward if you have the diagrams. As mentioned every swap is different, can't just say connect this wire to that wire and it works.

Will the 2 gre work in the place of the 5v?

You inspire me man I got a 91 yota 3vze automatic and want to 3.4 swap is that possible with my stock trans? Bro your in flippy floppy’s doing this cannot wait for my truck to get its new engine

I love this video cuz is the engine that I have in my t100 1996 sr5

@DirtGarage

3 жыл бұрын

3.4s are awesome!

I love the “Toyota’s never say die” shirt! Where did you get it??

This is awesome to know! I want to mate a w56 to my 3RZ-FE and wasn’t sure if I’d need some sort or adapter plate to do so.... looks like a straight swap?

@matthewstorm5188

Жыл бұрын

Typically, you use a W59 bellhousing to mate the RZ engines to a 22R transmission.

Did your ecu have a immobilizer ? If so how did you bypass it ?

yall should do a show where people bring you their old trucks and whatever they want to spend on them and have yall upgrade/modify them

part or how do you swap on 3.4 is the steering gear the power steering pump remains from the old engine [3.0]? Do you use parts. 3.4? greeting

@DirtGarage

3 жыл бұрын

We used the 3.4 power steering pump. And power steering lines from a 3.4, connected to the factory push pull box on the 85.

My car has the 5vz in it it is very reliable doesn’t skip a beat. It is on 334000 km my only complaint about the engine is it is a bit slow

@DirtGarage

3 жыл бұрын

Compared to the 22RE that used to be in the truck we have almost doubled its power! Definitely not slow anymore. Haha

I absolutely love the engine hoist without the pin in it lmao

@DirtGarage

3 жыл бұрын

No pin, she's welded 🤣

@WheelinPNW

3 жыл бұрын

@@DirtGarage oh shit that's a good idea actually I've never pull an engine with my hoist that can I can actually use the pin so I may do that lol

Hi I have a dude could be possible to use the transmisión w56 from 22r to 3.4 engine, I wanna do the swap but I would like to add 4.70 reducction. I hope to be clear I learning english 😅

Howzit wondering how you would go about converting from a 22r to 3.4 currently doing mine now but haven’t got to installing yet the fuel pump is wat I’m really worried about would it be better to go with a internal or external? Thanks

@DirtGarage

Жыл бұрын

Internal. Super simple to wire, just give it power with a relay that is triggered in "run" position

I don't know how to connect ECU harness ! Would you help me pls ❤

I am thinking of going with a 5ve v6 jdm engine on my 1986 Toyota pick up 1 ton dually dump truck

Can you go over the wiring harness please

What did you do for fuel lines?

Awesome! What did you do with the fuel pump? You used the same for the 22re?

@DirtGarage

3 жыл бұрын

22RE fuel pump is plenty for the 3.4, I have heard that if you supercharge it a upgrade is required.

They make full swap harness just fir this setup fir like 640$ from painless I do believe! With all sensors and module! I have a 96’ 3.4 mass air flow sensor in my hands from my 96’ taco I was lucky enough to have a buddy park in a ditch a cracked the block!

@DirtGarage

3 жыл бұрын

I made the conversion harness myself. I have a pretty good understanding of wiring engine swaps. Saves my friends some money 😂

@chriscollison933

3 жыл бұрын

Word yeah I do diesel stuff and always just grab rolls of wire and go at it to! You can pretty much get any connecter or pin out tools now so why not!

What did you do for wiring?

This is awesome

@DirtGarage

3 жыл бұрын

Thanks!

This video can't be true everybody knows 22res never die?? Haha nice swap, good content straight forward like yours is hard to find.

@buildadventure404

3 жыл бұрын

Apparently maple syrup is there kryptonite, No one ever knew cause no one ever tried...

@DirtGarage

3 жыл бұрын

We killed 2 in a week 😂 That is why this beaut has a 3.4 now! The engine was knocking before the maple syrup, that was just for good fun.

@ericsweat9917

3 жыл бұрын

I had a 81 toy 22re almost 500,000 miles. Driving it home at 30 mph it threw the #3 rod threw the block. Was able to drive it the rest of the way home. The piston had turned sideways and tore everything up. Yes it still ran so you are right can't kill them!!!

@jschnell64

3 жыл бұрын

@@ericsweat9917 I've blown up 2 22re with #3 rod bearing going. There must be something in the oiling circuit that makes that one go first?

@matthewstorm5188

Жыл бұрын

@ Build & Adventure WRONG! Timing chains are a 22R’s krytonite.

Love the donut media reference

@DirtGarage

3 жыл бұрын

Glad someone mentioned it! Haha

Nippondenso 197400-0040 is the bottom number I can’t read the top except the last 5 which is 20020! If you still need which I’m sure you don’t figured I’d throw it out there!

How much do you’ll charge for swap my same like you’ll

i swapped my 89 toyota to a 4.3 mated to toyota running gear. its mean now!

@DirtGarage

3 жыл бұрын

Awesome!

@TheColtz1

3 жыл бұрын

What all did you need to do this? I've been thinking either a 3.4 or 4.3 swap

@richardmurley8976

3 жыл бұрын

@@TheColtz1 bell housing, pressure plate, slave cylinder all from summit if i remember right. motor mounts from ebay. and i used a painless wiring kit. ive heard of guys making theyre own wiring kit and saving money.. had to make hoses for gm to toyota power steering work..im still running ifs so i had to mod the oil pan. used electric fan.. quite a bit to it ..but its a huge difference

I have an 88 4Runner and an 86 Pickup...I think one of them will be getting this...probably the 4Runner. I have a lot of research to do.

I have a 88’ & got the same motor, needs to be finished. What wiring harness did you use?

@DirtGarage

3 жыл бұрын

Made my own conversion harness.

Here in australia the easiest source for a 5vz is a vzj95 prado. The only very annoying thing is... from first year production onwards they ALL had immobilizer systems integral to the ecu. So to do a 5vz swap here down under you need the key, key reader ring, amplifier and security ecu from the donor car... And not to mention a whole lot of patience!

@JMunn55

Жыл бұрын

are you guys allowed to do diesel swaps? You guys got a lot of those in LCs etc, donors are nearly impossible to find in Canada unles you go TDI, and diesel fuel costs bit more offsetting the better mpg

@SMVB-cl6oc

Жыл бұрын

@@JMunn55 yea we do have alot of the diesle motors. The only difficulty there is the swap of the fuel pump and sourcing the lift pump and other items. Aswell as that i wouldnt be sure how easy it is to hook up the tacho.

@JMunn55

Жыл бұрын

@@SMVB-cl6oc yeah it's quite the process the swap, so I'm hoping the lower mileage 22RE replacement will last 10 years+, the 3RZ swap seemed too much for me, not worth the trouble for 35 hp, that said I've had had three 3RZs and everything is backward, I love em but for that amount of work, I'd rather do a full electric conversion

@vmoney9106

Жыл бұрын

Or go Haltech

so, the oil pan needs to be changed no matter if I plan to run the stock steering?

@DirtGarage

3 жыл бұрын

Yeah can't get away with the 3.4 pan. It smashes the diff.

What mpg do you get now

Now tell me what I need to do my 87..

what ecu did you use

Just curious. Why did you weld mounts rather than using the bolt-in Chilkat kit?

@DirtGarage

Жыл бұрын

Because it's cheaper to DIY

How was the wiring ? Did you have to get another harness?

@DirtGarage

3 жыл бұрын

Nope, I made my own conversion harness to connect the 3.4 engine harness to the 85 body harness.

@rickysorell8532

Жыл бұрын

@@DirtGarage do you remember anything of what you did to make that work like did you just use the engine harness from the 3.4 and then the 22re dash harness?

Thinking about doing this with my 91 3.0 in the future but that's a ways away

@DirtGarage

3 жыл бұрын

Way easier to go 3.0 to 3.4! Worth while swap!

@coop_69

3 жыл бұрын

@@DirtGarage Im rebuilding my top end of my 3.0 but it needed piston rings but I don't have the skill to do that I'm pretty sure I already fuckered it up anyway Soo I'll probably be getting that 3.4 soon

What tcase did you use to the r150f?

@DirtGarage

3 жыл бұрын

The stock 3.0 T-Case. One day it will get adapted back to gear drive for duals.

How would i go about swapping a 3.0 to a 22r

@DirtGarage

3 жыл бұрын

I would not bother with the 3.0, but it's essentially the same as the 3.4 shown in this video. Just don't have to move the 3.0 stuff onto the 3.4

What manual transmission did you use for the swap?

@mason3vze740

3 жыл бұрын

Probably something out of a Tacoma

Need to do this to the ‘89 4Runner. Anyone have a line on a good engine for sale

Dude where di you get that "Toyota's never say die" T-shirt?!?

Would love to see a 1uz next lol

@DirtGarage

3 жыл бұрын

Me too! Would love to put one in the 4Runner build if I find one for a decent deal.

@PureCountryof91

3 жыл бұрын

@@DirtGarage well, I'll be happy to watch it! I've got a 5.0 swapped 98 ranger 4x4

@matthewstorm5188

Жыл бұрын

1UZ with a manual transmission.

Is it possible to still throw in ac in there ?

@DirtGarage

3 жыл бұрын

Yup. I'm going to do this on my personal truck.

Can you just do a crossover delete on a 3.4 same as the 3.0.

@DirtGarage

3 жыл бұрын

Yup!

And why a crossover pipe and not just dual exhaust it

3vz gang

Hola como le dio energía ala ecu

I believe if you use the 3.0 mounts the engine will sit lower, use the 3.4 mounts and the hood won’t shut cause the engine will sit higher.

@DirtGarage

3 жыл бұрын

We used the 3.0 mounts 👍

@SOLDADITO76

3 жыл бұрын

Going to do this swap as soon as I get a good parts truck, it’s time to move up the displacement ladder. Going to do the needed internal mods to my tcase so I can keep the gear driven box.

What kind of trans you using?

@DirtGarage

3 жыл бұрын

R150, from a factory 3.0 truck.

Why does your 5vzfe sound so bad ass when you started it up? I wish mine sounded like that 😭

@craigd123

2 жыл бұрын

Chop the exhaust

Gearbox manual 5 speed R150F? R151F?

@DirtGarage

3 жыл бұрын

Yes, 5 speed R150

Nice

Oh hell that intake cost more than the truck. Nice though 😁

@DirtGarage

3 жыл бұрын

China intake 😂

Estoy por iniciar conversion 22r a 5vz, alguien que me apoyara diciendome todo lo que necesito para la modificacion?

how much harder do you think it would to do on a 1980?

@DirtGarage

2 жыл бұрын

Not any harder really.

congratulations, you just destroyed one of the best toyota engines ever made to drop in a 3.4

@DirtGarage

2 ай бұрын

Not even close 🤣 22res are old, not powerful and inefficient. Seen many of dead 22res, most trucks have them swapped out for RZs or 5VZ now. At the end of the day it's a 30+ year old motor, and your lucky if it's still strong. And I'd argue the 3.4 is the best motor toyota ever made.

@mofuncpl

2 ай бұрын

@@DirtGarage 🤣.....what ever you want to say to make your self feel correct.......there is a reason 22r and 22re motors are legendary.

@DirtGarage

2 ай бұрын

@mofuncpl facts are facts my dude. There is a reason so many rigs are 3.4 and 3rz swapped now. Believe it or not, toyota made many great motors.

@mofuncpl

2 ай бұрын

@@DirtGarage no i get it, you purposefully blew a hole in the side of an engine block that is becoming harder to find for restoration for the sole purpose of content. that is the fact my dude.

@DirtGarage

2 ай бұрын

@@mofuncpl We did it because it was fun. And I'd do it again

those swap we use the 3vz oil pan

@DirtGarage

Жыл бұрын

Yup. Same pan I put on it

I think you forgot to address the front drive line issue The transfer case is clocked wrong and you need a marlin crawler adapter

@DirtGarage

3 жыл бұрын

No issues here

What’s a head block

@DirtGarage

3 жыл бұрын

I dont know?

Poor 22r block. There isn’t any production of those blocks currently I don’t think

@DirtGarage

3 жыл бұрын

I have no clue. The 3.4 is a better motor all around though. 3.4 SWAP EVERYTHING.

@matthewstorm5188

Жыл бұрын

@Dirt Garage Any idea how difficult this swap is in a 2WD? It seems like everything I have seen is on 4WD. Nobody really seems to do 2WD. Is a 2WD swap just too difficult?

Awesome job guys , I'm about to do this but I need to get info on that ecu .

i have some good tunes you guys can use on ur next vid

Now I know where all the T100s are going?

@DirtGarage

3 жыл бұрын

Where?

@JosueLopez-te1ek

3 жыл бұрын

I still have mine never gonna sell it or anything else if the engine goes out im gonna rebuild it cuz I haven't had a truck like my t100 i love it is perfect for me

I'm going to be doing a 3.4 swap in my 83 Toyota pickup will the 3.0 transmission work

@DirtGarage

2 жыл бұрын

Yes

TENGO UNA 1994 4X4 4CIL

@cotisado16

3 жыл бұрын

Unico comentario en español.. yo tengo una 96' 3L diesel con turbo de 2L-T..

@JuanCarvajal21

3 жыл бұрын

Que bueno ver por acá habla hispana, tengo una J90 de motor 3rz, 4 en linea 2.7L

Why not a 2.8 diesel?☹ put a turbo on it and itll pull you more places than a petrol will

@samtimo3002

3 жыл бұрын

Or get a 3.0 diesel and get the electronically injected one, then chip it and turbo

@DirtGarage

3 жыл бұрын

Because $$, these 3.4s are everywhere and can be found very cheap. The 5VZ is almost twice the power of the old 22RE.

@samtimo3002

3 жыл бұрын

@@DirtGarage yea thats true, over here in straya we have diesels everywhere and mine used to do trails that patrols would struggle at, and the funny thing was i never had to put power down to turn the tyres when i clutch it

@samtimo3002

3 жыл бұрын

@@DirtGarage could always buy a 2.8 for 2500 AUD and then ship it idk how.much that would be but yea then again your gonna need alot more than just an engine to convert to diesel

@matthewstorm5188

Жыл бұрын

@sam timo On the other hand, you can get a 5VZ at your local pull-a-part for $300. And you DON’T have to pay shipping. Also, since virtually every first gen Taco 4x4 and 4Runner had this engine (almost NOBODY wanted these with a four, which is why the 3RZ is so rare), they are EVERYWHERE.

free

Why torch a 22re? Save it !

Adding one or two turbos with an intercooler is a must.

Is this legal for California bullcrap emission laws

@craigd123

2 жыл бұрын

No

@matthewstorm5188

Жыл бұрын

@Craig D Not true! Engine swaps are legal in California so long as the engine is newer than the vehicle you are swapping it into (true of ANY 22RE to 5VZ swap) and you use all 5VZ emissions gear. This includes all sensors, the ECU, cat, etc.

Yeah everybody thinks 22re's Run Forever well if you don't do a timing chain swap is not going to run forever unless you do it 150,000 MI people think they run forever but if you don't do that they don't

@matthewstorm5188

Жыл бұрын

22R’s have other shortcomings as well. Many have piston slap and suffer from excessive oil consumption and blowby. They can also have head gasket issues. And I have never seen a 22R that didn’t have a pitted deck surface. Oh, and let’s not forget then that top end tick that you often can’t get rid of no matter how hard you try to adjust the valves. Of course, much of the reason why people do swaps like this is that, even if your 22R does not have any of these issues, it’s just not the nicest motor to live with on a day-to-day basis. They’re slow. They guzzle gas, especially in relation to their meager power output. And they’re just generally rough and noisy. They are admittedly a product of an earlier era, and perhaps should be judged in that context. But the reality is that we can do better these days (and, indeed, since the mid 90s when these Tacoma motors debuted).