step by step process of using a corbin swage press to make .22 hollow point slugs
Жүктеу.....
Пікірлер: 91
@greenenko11 ай бұрын
Nice press! Auto ejector speeds up the process a lot
@SalehMagrabi10 ай бұрын
Thanks for sharing this valuable information with us.
@johnconnor67254 ай бұрын
Super great Video Thanks
@user-jq8ct5lt9n4 ай бұрын
Круто! Подход вообще огонь
@jefffromjersey528 ай бұрын
Thank you for sharing the process.. I can think of a number of Improvements you can make however .. if you want to hear it
@Premierslugs
6 ай бұрын
Yes I’m all for any improvement
@widihamdani5530 Жыл бұрын
Mantap👍 mimis slug
@jeffreystroman281110 ай бұрын
Where have these been all my life, need one above all else, except food and water, sex depending if someone else is involved.
@fha95075 ай бұрын
I just came across this been swaging for quit a few years. Did Richard make these dies for you? I have the Walnut Hill as well. I would love to have some dies made up in 25, 35, and 457.
@dougkapounek9024 Жыл бұрын
Hi, great video but where do you get or make the lead rods you are using? Thanks
@Premierslugs
Жыл бұрын
Hello I bought it on a drum and cut it down to length suitable to fit in to a air tight pasta container , I buy from a company In Rotherham,South Yorkshire
@DPCSchannel Жыл бұрын
Looks fun. Where do you get the lead wire from in the uk
@Premierslugs
Жыл бұрын
Hello I buy it from Heaps in Rotherham
@keithrowley585911 ай бұрын
Can you buy the dies to make fx type hybrid slugs. Looking great.
@Premierslugs
11 ай бұрын
You can yes , but that’s a two part process,first the die makes a u shaped tube sides and bottom then the next die forms the tip of the slug
@tedshickell73156 ай бұрын
Need one of those to make my slugs for the .35 cal aea I got
@Premierslugs
6 ай бұрын
They are excellent just buy the die and you can make whatever cal you want
@tedshickell7315
6 ай бұрын
@@Premierslugs where’s the best place to buy the die from
@Premierslugs
6 ай бұрын
@@tedshickell7315 the only place is Dave Corbin , Google them ping them an email and they will sort you out
@dataykhan Жыл бұрын
Great video could you please help me out to get this die setup only without press. Thanks
@Premierslugs
Жыл бұрын
I honestly don’t think that would be possible
@AmazingChinaToday
Жыл бұрын
@@Premierslugs There are some people out there who tap the die with a hammer to form the pellet. If you google for images you'll see them. Manufacturer name was "Star" something, but I couldn't find it for sale. Allegedly the "Star" die is about 200 dollars, so it's much more affordable.
@redgum13404 ай бұрын
How do you make the long 5mm wire core. Look like it might be about a foot long
@Premierslugs
4 ай бұрын
Hi I buy it on a roll and cut the that length just so it fits in my airtight box
@liukang812 ай бұрын
Where could I get slug tool kit,please sir?
@jwhill457 ай бұрын
I have the same Swage press, It's a walnut hill from r c e.. Where did you get the die?
@Premierslugs
7 ай бұрын
The die is a Dave Corbin with an adapter to suite the presss
@mikesmith8313 Жыл бұрын
Need some for my fac sumatra .22
@EduardoMiranda-wi5kc Жыл бұрын
Qual valor de uma presa dessa e envia para brasil
@gessemarceneiro31708 ай бұрын
Quero comprar uma máquina dessa vc vende?
@Thehunterofficial.5 ай бұрын
How to order the tool
@johnevans3824 ай бұрын
Hi bud just found your site if you don’t mind me asking where did you get your press and dies from I got .25 would like to have a go at making some many thanks john Anglesey north wales
@Premierslugs
4 ай бұрын
Hi I bought it used from a guy in Telford , the press is a Corbin walnut hill and are still available on the Corbin website in the Us , they are quite expensive though dies are Approx £550
@rickydaniel1573 Жыл бұрын
Any suggestions on where I can het the equipment please?
@Premierslugs
Жыл бұрын
Hi All can be bought from Dave Corbin or Richard Corbin , they are two brothers but have separate business
@hectorgonzalez7416
Жыл бұрын
Is there a website to get this press im new to this
@Premierslugs
Жыл бұрын
@@hectorgonzalez7416 hi you would just have to Google them
@claudioalegre8915 Жыл бұрын
Hola Tienen precisión a 100 yardas ?
@Premierslugs
Жыл бұрын
They are doing just over one hole at 50 yard and sub moa at 100
@thomascarboni7727 Жыл бұрын
Bellissima ,io ho cercato tanto lo stampo per fare pellet 5,5 ma l unica cosa che ho trovato arriva dalla Cina e faceva 5 pellet alla volta ,il problema è il costo molto alto ,900 euro più 300 euro per spedirlo in Italia,ho pensato anche a farmelo da solo ,ma troppo difficile .comunque la tua è una bellissima macchina complimenti 👍 saluti dall italia🇮🇹🇺🇲
@marucuppetualang326
Жыл бұрын
you buy in china.? how to buy it. I'm from Indonesia
@franceusordas12462 ай бұрын
Awesome machine..can i buy this machine from you,im from Philippines.
@Premierslugs
2 ай бұрын
Hi they are made and sold by Corbin manufacturing
@wilsonnunespereira56182 ай бұрын
Boa tarde, Amigo! Quanto custa essa prensa e a forma para slug hollow point?
@wilsonnunespereira5618
2 ай бұрын
Você tem um número de WhatsApp para conversarmos melhor sobre a prensa?
@Thehunterofficial.5 ай бұрын
interesting can i get that tool
@Premierslugs
5 ай бұрын
Yes Google Corbin press
@ImranHossain-zc6km6 ай бұрын
How could I buy .177 pallet mold like this .....please inform me
@Premierslugs
6 ай бұрын
You would have to contact Corbin
@Strike2Kill6 ай бұрын
Good morning, welcome, I want to buy a press like this one and the piece. Is it possible to have the dimensions and measurements if I want to make one like this? Thank you.
@Premierslugs
6 ай бұрын
Hi I didn’t make the press , It’s from Richard Corbin and the dies from Dave Corbin
@snipermbleset Жыл бұрын
what is the price if I want to buy the press tool?
@Premierslugs
Жыл бұрын
It’s not for sale
@honda16001 Жыл бұрын
How much was the setup? Thanks
@Premierslugs
Жыл бұрын
Hi I actually got mine used in the UK for £720 but I have bought dies lead lube ect on top of that , new it would be around £2000
@WaschyNumber1
11 ай бұрын
😳 2000£ 😞
@eduardomagdaleno4747 Жыл бұрын
Como le hago para conseguir una así pero en 5.5
@Premierslugs
Жыл бұрын
esto es en 5.5 .217
@PeakyBlinder Жыл бұрын
Where did you get that lead wire from
@Premierslugs
Жыл бұрын
Heaps in Rotherham,South Yorkshire
@PeakyBlinder
Жыл бұрын
@@Premierslugs cheers, I cast mine, But it's always easier to cut them.
@PeakyBlinder
Жыл бұрын
@@Premierslugs I'm in London Mick, How much do they cost you.
@Premierslugs
Жыл бұрын
I guess it would depend on how much you buy , give them a shout ,being as heavy as it is delivery ignite e expensive ?
@naveedsafdar6349 Жыл бұрын
Dollar price
@mendaharahunter83114 ай бұрын
Please 🙏🙏
@halaybeh Жыл бұрын
How much it is?
@Premierslugs
Жыл бұрын
Not selling but about £2000 new
@robertocosta5727 Жыл бұрын
Good evening, how much would you make a complete set of this for the caliber 6.35 mm or .25 ??, I am interested in buying
@Premierslugs
Жыл бұрын
Hi I don’t make them sorry , contact Dave Corbin in America
@robertocosta5727
Жыл бұрын
@@Premierslugs Thanks for answering, but how do I get in touch with this person or company?
@Premierslugs
Жыл бұрын
@@robertocosta5727 www.corbins.com/airgun.htm
@robertocosta5727
Жыл бұрын
Thanks
@PeakyBlinder Жыл бұрын
what swager is that please
@Premierslugs
Жыл бұрын
Hi It’s a Richard Corbin chestnut hill , basically the same as the mega mite from Dave Corbin
@PeakyBlinder
Жыл бұрын
@@Premierslugs ah ok thanks for that, im using a gmi swager, saves a fortune on slugs, where do you get your lead wire, i cast my blanks as im a roofer in london i get a lot of lead but the wire looks quite handy.
@Premierslugs
Жыл бұрын
@@PeakyBlinder I buy it from a place call heaps In Rotherham they will make it pure lead or add tin or whatever else you want and also swage it to the diameter you want too
@mikesmith8313
Жыл бұрын
@@Premierslugs I could detect your sheffield accent,
@Premierslugs
Жыл бұрын
@@mikesmith8313 No not from Sheffield , live in Barnsley,but from Hemsworth lol
@syn0105 ай бұрын
Без молотка не кашерно😂
@Premierslugs
5 ай бұрын
I have no idea what that says sorry
@Bedilmainan8 ай бұрын
Price ??
@Premierslugs
8 ай бұрын
They are about £2000
@Bedilmainan
8 ай бұрын
@@Premierslugs wow 🙏
@jlyle516 ай бұрын
Speaking louder would help. Please.
@leposkendari319110 ай бұрын
Bagrmana sy bisa memeblinya ? Kirim indonesia cal 177
@alexbrunes67415 ай бұрын
Hello, please give me a helping hand!!!!!!give me the dimensions of your abs, I want to copy...no one wants to help, they only think about money.....
Пікірлер: 91
Nice press! Auto ejector speeds up the process a lot
Thanks for sharing this valuable information with us.
Super great Video Thanks
Круто! Подход вообще огонь
Thank you for sharing the process.. I can think of a number of Improvements you can make however .. if you want to hear it
@Premierslugs
6 ай бұрын
Yes I’m all for any improvement
Mantap👍 mimis slug
Where have these been all my life, need one above all else, except food and water, sex depending if someone else is involved.
I just came across this been swaging for quit a few years. Did Richard make these dies for you? I have the Walnut Hill as well. I would love to have some dies made up in 25, 35, and 457.
Hi, great video but where do you get or make the lead rods you are using? Thanks
@Premierslugs
Жыл бұрын
Hello I bought it on a drum and cut it down to length suitable to fit in to a air tight pasta container , I buy from a company In Rotherham,South Yorkshire
Looks fun. Where do you get the lead wire from in the uk
@Premierslugs
Жыл бұрын
Hello I buy it from Heaps in Rotherham
Can you buy the dies to make fx type hybrid slugs. Looking great.
@Premierslugs
11 ай бұрын
You can yes , but that’s a two part process,first the die makes a u shaped tube sides and bottom then the next die forms the tip of the slug
Need one of those to make my slugs for the .35 cal aea I got
@Premierslugs
6 ай бұрын
They are excellent just buy the die and you can make whatever cal you want
@tedshickell7315
6 ай бұрын
@@Premierslugs where’s the best place to buy the die from
@Premierslugs
6 ай бұрын
@@tedshickell7315 the only place is Dave Corbin , Google them ping them an email and they will sort you out
Great video could you please help me out to get this die setup only without press. Thanks
@Premierslugs
Жыл бұрын
I honestly don’t think that would be possible
@AmazingChinaToday
Жыл бұрын
@@Premierslugs There are some people out there who tap the die with a hammer to form the pellet. If you google for images you'll see them. Manufacturer name was "Star" something, but I couldn't find it for sale. Allegedly the "Star" die is about 200 dollars, so it's much more affordable.
How do you make the long 5mm wire core. Look like it might be about a foot long
@Premierslugs
4 ай бұрын
Hi I buy it on a roll and cut the that length just so it fits in my airtight box
Where could I get slug tool kit,please sir?
I have the same Swage press, It's a walnut hill from r c e.. Where did you get the die?
@Premierslugs
7 ай бұрын
The die is a Dave Corbin with an adapter to suite the presss
Need some for my fac sumatra .22
Qual valor de uma presa dessa e envia para brasil
Quero comprar uma máquina dessa vc vende?
How to order the tool
Hi bud just found your site if you don’t mind me asking where did you get your press and dies from I got .25 would like to have a go at making some many thanks john Anglesey north wales
@Premierslugs
4 ай бұрын
Hi I bought it used from a guy in Telford , the press is a Corbin walnut hill and are still available on the Corbin website in the Us , they are quite expensive though dies are Approx £550
Any suggestions on where I can het the equipment please?
@Premierslugs
Жыл бұрын
Hi All can be bought from Dave Corbin or Richard Corbin , they are two brothers but have separate business
@hectorgonzalez7416
Жыл бұрын
Is there a website to get this press im new to this
@Premierslugs
Жыл бұрын
@@hectorgonzalez7416 hi you would just have to Google them
Hola Tienen precisión a 100 yardas ?
@Premierslugs
Жыл бұрын
They are doing just over one hole at 50 yard and sub moa at 100
Bellissima ,io ho cercato tanto lo stampo per fare pellet 5,5 ma l unica cosa che ho trovato arriva dalla Cina e faceva 5 pellet alla volta ,il problema è il costo molto alto ,900 euro più 300 euro per spedirlo in Italia,ho pensato anche a farmelo da solo ,ma troppo difficile .comunque la tua è una bellissima macchina complimenti 👍 saluti dall italia🇮🇹🇺🇲
@marucuppetualang326
Жыл бұрын
you buy in china.? how to buy it. I'm from Indonesia
Awesome machine..can i buy this machine from you,im from Philippines.
@Premierslugs
2 ай бұрын
Hi they are made and sold by Corbin manufacturing
Boa tarde, Amigo! Quanto custa essa prensa e a forma para slug hollow point?
@wilsonnunespereira5618
2 ай бұрын
Você tem um número de WhatsApp para conversarmos melhor sobre a prensa?
interesting can i get that tool
@Premierslugs
5 ай бұрын
Yes Google Corbin press
How could I buy .177 pallet mold like this .....please inform me
@Premierslugs
6 ай бұрын
You would have to contact Corbin
Good morning, welcome, I want to buy a press like this one and the piece. Is it possible to have the dimensions and measurements if I want to make one like this? Thank you.
@Premierslugs
6 ай бұрын
Hi I didn’t make the press , It’s from Richard Corbin and the dies from Dave Corbin
what is the price if I want to buy the press tool?
@Premierslugs
Жыл бұрын
It’s not for sale
How much was the setup? Thanks
@Premierslugs
Жыл бұрын
Hi I actually got mine used in the UK for £720 but I have bought dies lead lube ect on top of that , new it would be around £2000
@WaschyNumber1
11 ай бұрын
😳 2000£ 😞
Como le hago para conseguir una así pero en 5.5
@Premierslugs
Жыл бұрын
esto es en 5.5 .217
Where did you get that lead wire from
@Premierslugs
Жыл бұрын
Heaps in Rotherham,South Yorkshire
@PeakyBlinder
Жыл бұрын
@@Premierslugs cheers, I cast mine, But it's always easier to cut them.
@PeakyBlinder
Жыл бұрын
@@Premierslugs I'm in London Mick, How much do they cost you.
@Premierslugs
Жыл бұрын
I guess it would depend on how much you buy , give them a shout ,being as heavy as it is delivery ignite e expensive ?
Dollar price
Please 🙏🙏
How much it is?
@Premierslugs
Жыл бұрын
Not selling but about £2000 new
Good evening, how much would you make a complete set of this for the caliber 6.35 mm or .25 ??, I am interested in buying
@Premierslugs
Жыл бұрын
Hi I don’t make them sorry , contact Dave Corbin in America
@robertocosta5727
Жыл бұрын
@@Premierslugs Thanks for answering, but how do I get in touch with this person or company?
@Premierslugs
Жыл бұрын
@@robertocosta5727 www.corbins.com/airgun.htm
@robertocosta5727
Жыл бұрын
Thanks
what swager is that please
@Premierslugs
Жыл бұрын
Hi It’s a Richard Corbin chestnut hill , basically the same as the mega mite from Dave Corbin
@PeakyBlinder
Жыл бұрын
@@Premierslugs ah ok thanks for that, im using a gmi swager, saves a fortune on slugs, where do you get your lead wire, i cast my blanks as im a roofer in london i get a lot of lead but the wire looks quite handy.
@Premierslugs
Жыл бұрын
@@PeakyBlinder I buy it from a place call heaps In Rotherham they will make it pure lead or add tin or whatever else you want and also swage it to the diameter you want too
@mikesmith8313
Жыл бұрын
@@Premierslugs I could detect your sheffield accent,
@Premierslugs
Жыл бұрын
@@mikesmith8313 No not from Sheffield , live in Barnsley,but from Hemsworth lol
Без молотка не кашерно😂
@Premierslugs
5 ай бұрын
I have no idea what that says sorry
Price ??
@Premierslugs
8 ай бұрын
They are about £2000
@Bedilmainan
8 ай бұрын
@@Premierslugs wow 🙏
Speaking louder would help. Please.
Bagrmana sy bisa memeblinya ? Kirim indonesia cal 177
Hello, please give me a helping hand!!!!!!give me the dimensions of your abs, I want to copy...no one wants to help, they only think about money.....
@Premierslugs
5 ай бұрын
Hello I didn’t make the press
Do you make the dies if so please email me.