21-23 F150 RCSB Top 5 Best, Cheapest and Worst Mods!!
Hope you guys enjoyed the video!! Attached below are going to be the links to the parts I mentioned in the video. It’s a huge help if you can subscribe, like and share the video with another F150 enthusiast!!
Instagram: AldoShifts
TikTok: AldoShifts
Links to parts:
Vland Headlights VLAND LED Projector Headlights For 2021-2024 Ford F150 a.co/d/0Ez0SlW
OEM LED Headlights: Message me on IG and I can help you source some mint condition lights, Lariat, Raptor, Euro Raptor
Grilles:
OEM Grilles: Message me on IG and I can help you source some mint condition grilles, STX, Limited, Platinum, KR
OEM Replicas can be found on EBay
Ford Performance Door Sills SKU: FPP-M-1613208-F15A
Boosted Applications:
Whipple Stage 1 or 2
Paxton Kit
Procharger kit
Coyote Direct, Lethal Performance and Team Beefcake Racing are great websites to help answer questions and order parts.
00:00 - Intro
00:16 - Worst Mods
02:51 - Cheap but Tasteful Mods
05:08 - Best Mods (NO BUDGET)
Пікірлер: 85
Nice truck man!
Sweet truck
Thanks for the tips Aldo. Really going to rethink the cold air intake 👍🏽
So what are the LED headlights and matching fog lights? Where did you get them?
@aldoshifts8395
10 күн бұрын
@@cottermaniracingteam my headlights are off a European Raptor as they don’t use yellow side markers. They come clear from factory and my fog lights are the OEM fog lights that come on most XLT and up trims
I like your style. Nice looking truck.
@aldoshifts8395
7 ай бұрын
Appreciate it Josh, I like going for a simple clean look!
Whipple looks the best on these trucks. The performance from this blower is mind blowing
In my books, that is 10/10 truck. God bless
If you had a dragy you would know even on the stock tune you will gain a little time back on the quarter mile with a TRUE cai that is encased like the stock box. S and b, the afe gt momentum, roush, even the k and n aircharger are all closed off completely sealed intakes that DO allow more air, if not then colder air to get into your engine. All of them utilize the same ram air flap in the same position as the factory. Just saying, maybe on other cars its not worth it but the fact that the volumetric efficiency is what it is on those coyotes makes a good, true cold air intake actually quite worth it when your doing a n/a build. Them 5.0s love eating air, now if you plan on saving up for something like a whipple its not worth it then because the whipple already comes with a aftermarket intake.
The Mustang and truck are both bad ass, I love the look of the Tremor lights. I have a 23 F150 STX 5.0 and really want to upgrade to the tremor lighting.. Thanks for sharing
@aldoshifts8395
5 ай бұрын
Appreciate the comment, the lighting will transform the look of your truck
Did the door sills end up fitting ? I’m looking to ordering them for my single cab but it only calls out for 4 door
Clean truck! Looking good, I did Katzkin seats in my truck last year and I love them.
@aldoshifts8395
7 ай бұрын
Really changes the interior!!
Why not put led bulbs into halogen housing? I did just that, re-aimed them, light up the road for me and never get flashed from upcoming traffic. $300 for hi/low bulbs all in. I like the one led projectors but my pocket isn’t build that way.
@aldoshifts8395
6 ай бұрын
I’m a big cosmetics guy and I feel like the OEM LED projector headlight is the best looking one. Not knocking on anyone for putting LED bulbs. Do what finances can allow, regardless, it’s an upgrade. 👍
The limited Lightning interior would look sick on the truck
Where can you get the seat covers from the limited?
@aldoshifts8395
7 ай бұрын
eBay!!
I have a dropped 23’ that I daily and would love to Whipple but worried about reliability. Subbed!
@aldoshifts8395
5 ай бұрын
I’m about to drop a new video going over reliability and towing with a lowered / whipple truck! Not too shabby of a job
My dog sits on the arm rest . But no racing with the dog !
What headlights and fog lights are those
@aldoshifts8395
5 ай бұрын
Raptor euro headlights and oem led headlights
@TERINTIN0
5 ай бұрын
You have a link for the fog lights ?
Where can u get those seat covers at bro?
@aldoshifts8395
7 ай бұрын
eBay!! Search the model trim you’re looking for, it’s a hit or miss but just keep looking for those deals
Nice truck!
@aldoshifts8395
4 ай бұрын
Thanks Raul!
Are the vland headlights actually good, or do you suggest going OEM all the way?
@aldoshifts8395
5 ай бұрын
Only negative I’ve heard of vland is condensation makes it way in. Can’t go wrong with either, because OEM trucks have had faulty LED DRL failures
Do the console without the shifter. That extra space where the shifter goes is great
@aldoshifts8395
4 ай бұрын
That’s what I’m thinking!!
OR…. do what ever you want to your truck.
@aldoshifts8395
3 ай бұрын
You’re right, as long as you like it and enjoy it
Appreciate
will a Tremor hood work or do they require a different grille?
@aldoshifts8395
6 ай бұрын
Tremor hood should work with any OEM grille
Hey, how’s the made in China after market grille quality compared to OEM?? I’ve been eying those on eBay too.
@aldoshifts8395
7 ай бұрын
Not bad at all, I’ve had it on for a couple thousand miles and it hasn’t chipped from rocks
@Vile_90
6 ай бұрын
Came here to ask this. Doing the same and I'd rather leave the base model grill alone instead of spending 1300 for an oem.
What size are the wheels?
@aldoshifts8395
27 күн бұрын
@@robertreyes1553 20x7 and 20x10!
@robertreyes1553
27 күн бұрын
What tires do you find to be good a daily?
What is your wheel size and offset? Also what is your tire size, did you have any regrets going 17 vs 20 not being able to add headlocks later? I have a 2023 I’m stuck debating between 17” 20”s
@aldoshifts8395
7 ай бұрын
I went with 20x7 fronts and 20x10 rears 245/45/20 and 295/40/20. I went with the 20s as the street setup and I will order a 17 beadlocks for the rear once I’m ready to start drag racing the truck. I’ll get you the offset in a bit
Gold air intakes are not that bad ofthat's meant as long as you put other things on there with a cold there and take system. Yes, in general, nothing's perfect, but cold air intakes work well with other things. Along with exhaust manifold plugs. Whatever else goes hand-in-hand with everything else? But again, just intake excel excel by itself is not good, but every number counts. When adding horsepower 5 year 10 here to hear everything accounts in a long run. So nothing is totally perfect for horsepower other than a big fat below her. But little things do matter in a long run. Cause you're equally numbers up-and-up and up. So not saying you're wrong not saying you're right, but depends on the person and the money? Yes, same thing, once exhaust exhaust does help by number 1505 horsepower, 2 horsepower at all depends. Yes, ma, it's very good. All depends on how you put them on and adding theman with other things does work. Sorry if isn't a bad spelling but have I amounted to find a car before? Yes, all depends on what you're putting on it. And in the process that's a trial on error just like anything testing. What works for the car and what works for you trial and error
Goal for the truck this year gotta be for it to pop a wheelie 😅
@aldoshifts8395
7 ай бұрын
Not happening 😂it’s the daily bro
What’s the mph cut off on Whipple tune ?
@aldoshifts8395
5 ай бұрын
130mph on the dot
What window tint % are you running? Ceramic?
@713LMFAO713
6 ай бұрын
I got 5% all round and 20% in the front. All ceramic, gets real dark at night but I haven’t had major issues. I love how it looks, I would suggest going 30% ceramic in the front if your vision is not too good.
@aldoshifts8395
6 ай бұрын
I have 5% in the rear window and 15% in the sides. Windshield is not tinted
is it for sale art
Can you drop the link for the grill plz I also don’t want to drop over a band 😂
@aldoshifts8395
7 ай бұрын
www.ebay.com/itm/364589317462?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=aeq3cni3tdm&sssrc=4429486&ssuid=&var=&widget_ver=artemis&media=COPY
Hell no! Fishbowl for life
@aldoshifts8395
5 ай бұрын
gotta let them see the gorgeous face behind the wheel 😂
I’m thinking about getting the cargo light. Not pricy
@aldoshifts8395
7 ай бұрын
That’s a good one, was thinking of adding a bed cover but they’re pricey
@Hammerlsv
7 ай бұрын
@@aldoshifts8395 yes going to do that as well. I picked up my truck Saturday this coming Thursday it gets 3/5 IHC with coil overs and wheels and tires 22 niche and nittos . Friday is exhaust going magna flow I’m not into real loud exhaust I’m 58 now lol. Eventually will get everything that you have and that you were getting this is gonna take some time I’ll have this truck a while because I have a lot in it but so far I’m loving it the way it came I’m sure I’ll love it more once I get it the way I want it I had a 2022 GEN 3 Raptor that I traded to do this . Should be fun.
@armandoalvarado2710
6 ай бұрын
@@HammerlsvI feel better about building a sport truck now. I’m 47 😅
@Hammerlsv
6 ай бұрын
@@armandoalvarado2710 yea my wife said what the heck is going on are you 23 ? I said I think I am still lol 😂. I think it’s because I always wanted a lighting now is my opportunity to make this my own. Remember back in the day you could only get a single cab no such thing is a crew cab !
bed size?
@aldoshifts8395
7 ай бұрын
6.5 is the shortest a regular cab comes in
What’s your tire setup? Are those 20x? Love the set up Aldo!
@aldoshifts8395
3 ай бұрын
Appreciate it brotha!! 20x7 and 20x10, if I could do it again, I know it wouldn’t look as good but I might have done a squared setup
@JortyZPerformance
3 ай бұрын
Nice. Are your back tires 285?
@JortyZPerformance
3 ай бұрын
Like you said everyone has those damn forgestars but I don’t know what set up to go with😭😭
70 mph if I floor it she spins
@aldoshifts8395
10 күн бұрын
What tires do you have?
@barrymitchell4424
10 күн бұрын
@@aldoshifts8395 Michelin xlt
@me next time lol
@aldoshifts8395
7 ай бұрын
Your wheels are bronze so they’re different. You change setups often af too 😂
I never see forgestars on the ones around me, literally everyone that build these as a street truck throw chrome welds on it and it just looks so weird to me. Ig yours doesn’t, it actually looks super clean with the white paint. I hate the black paint with the black and chrome welds, literally EVERYONE does that on the black trucks. If its black then why not make it black everything. That for me personally is exactly how I’m gonna set mine up when I get my 24. Agate black, lower it, and do something that is actually unique and get some 22 black ford performance rims.
bro your wheels arent "unique"
@aldoshifts8395
7 ай бұрын
I’ve seen trucks online with them but not in person. Sorry if you have forgestars, but I see them everywhere
@Babyaliennnnn
6 ай бұрын
Polished welds aren’t too common black ones yea
@aldoshifts8395
6 ай бұрын
@@Babyaliennnnn they’re the same price too but they’re just harder to keep clean 😅
I have a similar truck. 23 rcsb avalanche. Very much like yours. Whipple going on tomorrow. Lund tuned. I’ll look you up on IG
@aldoshifts8395
7 ай бұрын
I’m interested in seeing the difference I whipple tune vs Lund. I bet it’ll be a big difference
@TwinTurboLsx
7 ай бұрын
oh ya. Whipple tune is very conservative. Lots left on the table. @@aldoshifts8395