Add small drops of grease inside the rubber tracks - will hold them in place. Also when using any detailer on a dirty paint finish try to prevent from sending the dirty side of the microfiber rag back in the same direction you just wiped the dirt off with you are scratching the clear coat. Thanks for the vid

@RK-de5wg

19 сағат бұрын

Grease? How about just using some simple black rtv and let it dry first. Problem solved and there won’t be any dirty grease leaking through on that nice paint.

@DenW.

4 сағат бұрын

@@RK-de5wg small drop (s) wipe it off no leaking.

"It's mine,we're gonna do it." AMEN brother, do ya Thang. Lookin better already.

@StrickPerformance

3 ай бұрын

Thanks for the Support

That was a painful intallation... Agreed on that rear light, looks hideous. Can't wait to take mine off.

I put la chopper 9/1/2 riser and it takes stock bars didn’t block anything and makes it much more comfortable riding position! The stock bars on the bike fit!

@StrickPerformance

3 ай бұрын

Awesome!

Beautiful man !!

@StrickPerformance

3 ай бұрын

Thanks a lot!

Excellent work. I did mine also.

@StrickPerformance

2 ай бұрын

Nice work!

Looks great, would be nice if they colour matched the part, but now I’m just being fussy! Now that pipe man, hurry up with the video please, can’t wait to see it!!! Next time you’re dealing with a gasket like that, try a dab of silicone in a couple places and let it set, it makes life much easier on finicky jobs like this. Keep it up man, this could be a winner for you. Not many people are truly customising their CVO, but the C stands for ‘CUSTOM’

@StrickPerformance

3 ай бұрын

It's coming

Nice bike! Headed to Myrtle this evening. I’ll speak if I see you there.

@StrickPerformance

3 ай бұрын

It's wild down here!

Yes much better

@StrickPerformance

25 күн бұрын

Thank You

The fact that you have to change anything on a 40-50 k motorcycle is nuts but suckers are born everyday.

@StrickPerformance

2 ай бұрын

We are

Does that weigh a lot?

Looks a lot better.

@StrickPerformance

3 ай бұрын

Thanks

Got to tape the gasket so it doesn't move. Saw another person on youtube install this part and they used a small piece of tape to hold the gasket in place. He also had to cut a small hole in License Plate itself to clear the wire.

@StrickPerformance

3 ай бұрын

Awesome

Little dab of glue on them gaskets would’ve done wonders.. looks slick though.. much better than stock 🔥

@StrickPerformance

2 ай бұрын

Good call! Thanks

JoCo!!!! subscribing

@StrickPerformance

25 күн бұрын

Thank you

If you don’t mind can you give us the part number on the back of the wraparound package?

@StrickPerformance

25 күн бұрын

?

Looks good

@StrickPerformance

3 ай бұрын

Thanks

I used blue painters tape on inside of gaskets to hold it on.

@StrickPerformance

3 ай бұрын

I thought about it.

Any idea if this fits the 24 road glide non cvo model? 🤙🏼🇺🇸

@StrickPerformance

25 күн бұрын

Yes

Good job. next time try a dab of silicone on the gaskets. Might just make your life easier.

@StrickPerformance

3 ай бұрын

Thanks for the tip!

Just a little grease on the gasket and it works fine.

@StrickPerformance

3 ай бұрын

Nice!

A small piece of tape would hold that gasket in place, then remove it before securing the plate to the bike.

@StrickPerformance

3 ай бұрын

Thank you

I stuck the gaskets on with 2 sided tape.

@StrickPerformance

3 ай бұрын

Thank you for the comment!

As you and many others discovered by these videos this thing is a PIA to order and even a larger PIA to install. Poor execution. Hard pass until another company designs a better product.That was painful to watch.

@StrickPerformance

3 ай бұрын

Painful for sure

@guysmiley8473

2 ай бұрын

It's Harley-Davidsons fault. Why would they install that monstrosity of a license plate light. A little adhesive on the gasket and mounting the cover plate temporarily would probably help.

And you do know installing them mid bend bars will block your view of the dash no matter what riser used? I would not be playing around with parts only to make functionally worse. I own that bike leave it stock. Perfect as is.

@StrickPerformance

3 ай бұрын

Thanks for the feedback

Use a small coating of Vaseline on the gasket. Apply it to the side where it is placed against the light assembly. It will hold it in place long enough to attach the light.

@StrickPerformance

3 ай бұрын

Thank you for the comment!

@edf8613

2 ай бұрын

I used a few drops os super glue

Put some painters tape around the area you’re working... your banging your plate all over the place while you’re doing the install… Makes me cringe😊

@StrickPerformance

2 ай бұрын

Thanks