2024 and 2023 CVO Street Glide Handlebar Install | KST Kustoms

Автокөліктер мен көлік құралдары

Detailed tutorial showing the installation of 12" Patriot Baggers on a 2024 Harley Davidson Street Glide. The same process applies to the 2023 CVO Street Glide as well. KST Kustoms is the leader in Quality, American Made Handlebars and Customer Support

Пікірлер: 55

  • @gregrose6915
    @gregrose69155 ай бұрын

    Wow, I was just wondering today how to change bars on these new bikes. What a phenomenal step by step instructional video. Harley put a lot of engineering to these models to make the bar change so much easier. You've got a new subscriber!! Well done sir. I cannot give this enough likes

  • @kstkustoms1324

    @kstkustoms1324

    5 ай бұрын

    Thank you sir

  • @kenroemmich8695
    @kenroemmich86952 ай бұрын

    Dude that is amazing video I am somewhat a mechanic but not on motorcycles I had it the whole thing done handlebars installed everything in 2 hours with your video help you are simply just totally amazing thank you for everything it saved me $850 but Harley was going to charge

  • @baturenchik
    @baturenchik2 ай бұрын

    You can actually adjust the handlebar angle after complete assembly by simply removing USB drawer. It will give you perfect access to adjustment bolts

  • @djs022867

    @djs022867

    2 ай бұрын

    Good to know! Any tricks to removing the USB drawer?

  • @whines-mu3vt

    @whines-mu3vt

    Ай бұрын

    @@djs022867 no tricks, just give it a little tug.

  • @randallhd
    @randallhd5 ай бұрын

    Thank you sir just put the bison on my 24 SG as always great job explaining step by step. Appreciate your customer service second to none.

  • @Cornel_T
    @Cornel_T2 ай бұрын

    Excellent Video! One thing I would like to add is that the handlebars can be adjusted with the fairing in place by removing the cell phone tray, it just slides out. With the tray removed you have access to the riser bolts.

  • @kstkustoms1324

    @kstkustoms1324

    2 ай бұрын

    Thanks for the insight. We did figure this out after the fact as well 😂. I need to post a separate video showing that

  • @JohnNewton-ev8ch

    @JohnNewton-ev8ch

    16 күн бұрын

    ​@kstkustoms1324 please do!

  • @deeznuts617
    @deeznuts6174 ай бұрын

    Phenomenal tutorial. Had a customer drop off his 24 CVO street glide today wanting a set of bars installed. Helped me out a ton.

  • @bentleymoto2633
    @bentleymoto26335 ай бұрын

    Great job, thanks for the install video

  • @pengyG10
    @pengyG105 ай бұрын

    you guys are the best!!! see you in Daytona

  • @sumncguy
    @sumncguyАй бұрын

    This is a great video. I was able to complete the job in about 4 hours going real slow. One problem those is that the the clutch and brake lever mounts have about a 1/8" or 1/16" inch gap. The controls arent moving but there is a gap. Any idea ??

  • @dfunklegendfontdawg5023
    @dfunklegendfontdawg5023Күн бұрын

    How tall are you? Going to get these but can’t decide on 12” or 14”. Great vid, thx. Just subscribed!

  • @leroidelacanau4309
    @leroidelacanau43093 ай бұрын

    Fantastic instructional video. The only comment is the lighting. I think with good video lighting the process would stand out even more. Have FLHXSE CVO 2024 Q : how much time does it take to perform the full process ? Q : Any idea how much time it will take to re-adjust the handlebar once fully installed (including the fairing) ? Q : Are there any differences with the installation of 12" Bison Bagger or 12" Patriot Bagger ? Thanks for your reply - Greetings from Belgium - Europe

  • @nicksmith-ev1bu
    @nicksmith-ev1bu3 ай бұрын

    How much longer of an upper clutch line was used from Magnum? What is the size of stock and the size of the magnum upper?

  • @dustydurr1347
    @dustydurr13475 ай бұрын

    Just put the 10” Patriots on my 24 SG last night. It can be done without removing the inner fairing completely with a little bit of finessing but definitely more of a pain.

  • @jimhalper206

    @jimhalper206

    5 ай бұрын

    Did you use the stock clutch cable. If so how did rebending it go?

  • @gp62902

    @gp62902

    4 ай бұрын

    How much taller are the 10” compared to the stock bars?

  • @gp62902
    @gp629024 ай бұрын

    For future handlebar adjustments, example repositioning the handlebars after new seat install, does the entire fairing have to be removed or just the plastic fork lock cover? Thanks.

  • @kstkustoms1324

    @kstkustoms1324

    2 ай бұрын

    Call me. 678-378-5036 We figured out a way to do it without tearing the whole thing back apart

  • @dieselcpr
    @dieselcpr2 ай бұрын

    Great video. I have purchased the 12” Bison’s and I’m so looking forward to getting them swapped. Harley says they charge 7 hours labor and wants $900. I am in Indianapolis, any suggestions on somewhere I can get them installed cheaper without voiding warranty?

  • @matt5734ify

    @matt5734ify

    Ай бұрын

    What did u end up doing??

  • @markhd2023
    @markhd2023Ай бұрын

    Can you still use the stock mirrors with these 12" bars, like can you see them? Looks like it. I had 12" bars on a 23 street glide and with that older design you couldn't see the mirrors at all, they were perfectly blocked.

  • @kstkustoms1324

    @kstkustoms1324

    Ай бұрын

    They will still be blocked a little bit but you can see more of these than the 14-23 models

  • @bobursits4227
    @bobursits42273 ай бұрын

    I just got a 24 SG and looking to change the bars. Are you going to be at the Myrtle Beach rally next month?

  • @kstkustoms1324

    @kstkustoms1324

    3 ай бұрын

    Yes sir. We would love to do this for you. Call 678-378-5036 and I’ll write up an appointment

  • @Blackczar911
    @Blackczar9115 ай бұрын

    You have to purchase new lids from Harley Davidson? When will the cutting kit be available?

  • @kstkustoms1324

    @kstkustoms1324

    5 ай бұрын

    ?

  • @Garage28_28
    @Garage28_28Ай бұрын

    So you only need a longer clutch cable for 12 inch everything else will work ok ?

  • @kstkustoms1324

    @kstkustoms1324

    Ай бұрын

    As stated, that is Correct.

  • @paulpatterson1288
    @paulpatterson12884 ай бұрын

    In the 2024 street glide video. How tall were those bars that you used?

  • @kstkustoms1324

    @kstkustoms1324

    4 ай бұрын

    12”

  • @jimfoy7903
    @jimfoy79032 ай бұрын

    Whats the length of upper clutch cable required to run a set of 14” patriot baggers? I bought a set from your website.

  • @kstkustoms1324

    @kstkustoms1324

    2 ай бұрын

    43” I believe

  • @julianalzate887
    @julianalzate8873 ай бұрын

    Do the 14 inch bars have the same process? Is the clutch cable the only one that needs to be changed?

  • @kstkustoms1324

    @kstkustoms1324

    3 ай бұрын

    Yes

  • @BlaiseWentzell
    @BlaiseWentzell2 ай бұрын

    High Occtane H.D. is putting the patriot bagger 12" on m 2024 CVO StreetGlide having hard time with the brake line telling me need to put 4" extended brake line for a safer & better looking Job. i have been waiting since February

  • @kstkustoms1324

    @kstkustoms1324

    2 ай бұрын

    Hey man. I hate to hear that they are trying to sell you on that. We have probably done more of these than anyone in the country, ive never changed the brake line. Even up to 14" with stock brake line

  • @brianmarrero1221
    @brianmarrero12213 ай бұрын

    Did you just use the 4” over clutch extension?

  • @kstkustoms1324

    @kstkustoms1324

    3 ай бұрын

    I replace the upper clutch cable. Watch the video I go over it in detail

  • @williamjurgenson3502
    @williamjurgenson35025 ай бұрын

    Whos clutch cable did you use?

  • @kstkustoms1324

    @kstkustoms1324

    5 ай бұрын

    We have them. We buy them from magnum shielding

  • @williamjurgenson3502

    @williamjurgenson3502

    5 ай бұрын

    Huh, they dont have them on their website yet. Do you have a link to them?

  • @kstkustoms1324

    @kstkustoms1324

    5 ай бұрын

    @@williamjurgenson3502 they are making them custom for us right now. They had hoped to have them available for mass production in 4 weeks. I have a lot of inventory built up in house. I have them bundled with the street glide bars for the 23cvo/24 street glide on the website

  • @williamjurgenson3502

    @williamjurgenson3502

    5 ай бұрын

    Thanks for the info

  • @brettmaddox3496

    @brettmaddox3496

    5 ай бұрын

    I’m so glad I found this video. Thank y’all so much for posting! So the wiring pulled from the stock bars is long enough to re-use in 14” bars?

  • @hdrider6303
    @hdrider63035 ай бұрын

    Do you sell the extended clutch cable

  • @kstkustoms1324

    @kstkustoms1324

    5 ай бұрын

    Yeah it’s bundled with the handlebar. Go to the product page for the handlebar style you are looking for and you can select yes or no on the clutch cable

  • @hdrider6303

    @hdrider6303

    5 ай бұрын

    Can you sell just the cable? My friend already bought Fat Bagger 12” bars but didnt know about having to replace the clutch cable

  • @kstkustoms1324

    @kstkustoms1324

    5 ай бұрын

    @@hdrider6303 sure. $150. Call the office at 770-537-9133.

  • @hdrider6303

    @hdrider6303

    5 ай бұрын

    Ok.. thanks!

  • @nicksmith-ev1bu
    @nicksmith-ev1bu3 ай бұрын

    I find it funny how they state you don’t need to change cables will the bars yet on the install video they use a different clutch cable upper. How about a video showing you bending that hard casing clutch line…

  • @kstkustoms1324

    @kstkustoms1324

    3 ай бұрын

    Point it out if I’m wrong but where is it stated that you don’t have to change the clutch cable on this bike? Pretty cut and dry on bending the stock one. Just form it/manipulate it until it fits the new geometry. You will still need the clutch extension if that’s the route you choose, which is stated. It’s just a lot cleaner and the same money installing a flexible upper

Келесі