I know this is an older video but I love watching your videos. Have you tried an Apex technical innovations head yet? I just put one on my 17 yz250x with the XC dome and I love it. I couldn’t believe how well I could get the bike lugged down in conjunction with a gytr fww. Best upgrade I’ve done so far to my bike.

@highlandcycles

2 ай бұрын

I haven't

Kelsey's heads are like crack! He's helped me with 3 high comp sleds, 1 big bore sled now I'm on my 3rd running 15.5 on a 22 300xc. Widening the powerband and and waking up the ride everytime.

Sounds like a great test!!!!

I’m new to your channel and I’m enjoying your real world no bullshit reviews! Makes me want get a new XC 300 too!

@highlandcycles

Жыл бұрын

Right on. Thanks.

Can't wait to hear how each head does on the trails. Really like the RK head on my Betta 200 and loved it on my 2020 300XC and plan on getting one for the 2023 300XC whenever it comes in. Love the content, keep it coming.

@highlandcycles

Жыл бұрын

Thanks

Just ordered the RK dome for my XC - trail / enduro model. Looking for a cleaner bottom end and idle as well. Thanks for the all the testing on your channel 😀

@highlandcycles

Жыл бұрын

Good choice!

Morgan this a little late, but I am looking at a head. I am looking at RK insert, the TSP, but I heard that maybe you can just use the SX head insert which is much more affordable. But then I heard the 24 SX insert won't work on the 24 XCW cylinder. Do you know anything about this? The head is the same part number but maybe its how the head seats on the cylinder? Thanks!

Sounds sweet👍

@highlandcycles

Жыл бұрын

Thanks. It’s such a sweet bike

IDAHO FOR THE WIN!! ❤️❤️❤️❤️🤘🤘🤘🤣

Bro how tight is your hat that it doesn't fly off? 🤣 I can't get out of 2nd without flipping mine backwards . Love all the '23 KTM videos

@highlandcycles

Жыл бұрын

Hahahahaha. It’s magic

Would love to see dyno results for these head inserts

@highlandcycles

Жыл бұрын

Me too. I wish I had a dyno.

@mrmoparrr

8 ай бұрын

What about S3 Pipes ?

Great review , will the increased compression caused by the insert cause any detonation issues ?? Thanks

@highlandcycles

Жыл бұрын

That’s always a concern but when we get it right, it won’t detonate at all. Especially up at elevation. It might require a little race gas at sea level

Sounds crisp and barky off the bottom in the parking lot at 7:10 or so into the video! I noticed my '18 300 sounds "deeper" with a higher compression head on it. Some people question the need for head swapping, but in high elevation riding it really helps restore the lost low end. I imagine a head swapped 300 might be a bit of a handful below 3,000 feet or so. My head equipped 300 gets pretty "excitable" at Rabbit Valley, which is the lowest place I ride at 4,600 feet. At least on the older 2Ts, KTM's squish band is a bit lacking. My '18 really woke up and runs crispy critter with the S3 head I have on it, I swear it burns cleaner on the same jetting. Of the two, I like the head with the smoothed squish transition. The sharp one seems like it could create a hot spot there and more potential for detonation - who knows though, Kels knows more about this than I do that is for sure. Will be interested to hear your findings!

Love the real world no bs videos.Will these heads combustion chamber dome shape stop a 250sx carburated bike from pipe knocking.I ve jetted this bike lean and its stopped the pipe knock any change in the temp and Hou gave to change pilot or jet needle clips postion has jd needle.Never had a stroke so finicky .Let me know would appreciate any help Iam a mechanic have been for a long time.

@highlandcycles

Жыл бұрын

Not sure man. I really don’t know the difference between these domes and the normal ones. This bike isnt pinging but everything about this motor is new.

Have you tried a John Ross tune? Id highly recommend!

@highlandcycles

Жыл бұрын

I haven’t

I'm running the RK Tek head on my Sherco 300se love it, Do you know if Kelsey has a piston kit for the Sherco 300 yet?

@highlandcycles

Жыл бұрын

I don’t think so

I like the inserts. Is that typical, or would you replace the entire top cap on most bikes cylinders?

@MechShark

Жыл бұрын

For previous gen bikes it's the whole head

@highlandcycles

Жыл бұрын

Most bikes require an entire head

What is your thoughts about rk head, injector relocation kit and stoc ECU? Is hard to find good tuner in Europe for ecu,and TSP are way to expensive

@highlandcycles

8 ай бұрын

RK head is great. It’s a more explosive power delivery than anything else I’ve used. It, with a stock ecu is good. The tune is what really makes a massive difference but the RK with IRK and stock ecu is a great upgrade

Hey did you ever test the 145 head . I bought a rk tech head for Kelce and he sent me the 145 . I live at sea level to 1200 .

@highlandcycles

5 ай бұрын

I didn’t

Nice. Any thoughts on remapping the ECU at some point ? I imagine this is going to be something new for engine tuners now that it's TBI.

@highlandcycles

Жыл бұрын

Of course people are going to want to. So far I can't see any reason to. It is spot on.

@duffyrides

Жыл бұрын

@@highlandcycles I just bought the 23 250XC and will be using it for both moto and some trail riding. Was buying the 300SX at first but changed my mind because I've never had an XC and always wanted to try one Wondering what the difference in ECU mapping is between these and the SX models. Any chance you could get some info on that ? Would be really helpful and great to know !

@highlandcycles

Жыл бұрын

@@duffyrides I will do my best

@bh86utid

Жыл бұрын

@@highlandcycles I fouled a plug mid ride in a technical slow rock section. EFI bike definitely shouldn't do that in my mind but maybe I'm crazy. Makes me think it'd help to do some tuning

@highlandcycles

Жыл бұрын

@@bh86utid it shouldn’t. But I think they have them running too rich because of the TPI issues

I wonder if it’s a similar setup for the tc/sx250 FI 2-strokes for 2023??

@highlandcycles

Жыл бұрын

Yep. The same

Has anyone thought of using the 300sx head insert on the 300exc?

@highlandcycles

8 ай бұрын

They don’t fit unfortunately

@vincenzobiscotti8031

8 ай бұрын

Are you sure? the cylinder head is identical and the insert changes only by 1 number on the spare part code.. in fact I bought one and will try it at the first opportunity...

Race gas only with the head inserts? Or is high octane 91 or 93 usable?

@highlandcycles

Жыл бұрын

pump gas. I specifically asked for a pump gas head.

🔥👊🔥🔨⚙️🏍

Not ktm related but at what compression ratio is it time to change the top end on a yz250 2 stroke? Ive searched forums but answers are just all over the board but figured youd have good knowledge for this question

@highlandcycles

Жыл бұрын

YZ’s typically have much higher compression than other bikes. A fresh one usually has close to or over 200psi. I usually plan on a top end when it gets down to around 150.

@danfasching926

Жыл бұрын

@@highlandcycles awesome thank you!

The rk tek inserts fit in the stock head?? I want to buy an rk tek head for my 2022 300xc, but the rk tek website doesn't give an option for the orange anodized heads. Did they stop making those?

@highlandcycles

Жыл бұрын

On these the insert fits into the stock head on yours they aren't like that. Unfortunately he did stop doing anodizing. I guess he had too many issues.

@JacobYoces

Жыл бұрын

@@highlandcycles oh okay bummer. Thanks for the reply

I am done modding my motors, I feel like the gains, if any, don't improve my riding. I don't need more power.

@highlandcycles

Жыл бұрын

I hear that for sure. For me, at this elevation and above it helps me carry a taller gear which helps keep the bike more settled and less twitchy

How can I buy the same head you’re running from Kelsey?

@highlandcycles

10 ай бұрын

Just call him and ask for it.